Verity vspider.exe process never stops and sucks system resources

I'm running a scheduled task to index a site on a Win2k3 server running CF8. I'm having a problem where the vspider.exe process never stops and sucks up system resources, slowing my whole server down. It actually is doing quite a bit of work... I'm directing the output into a log file, and I'm getting 300 K of information and it seems to be walking the site just fine. But it ends up not finishing the job and running forever. I have to open the task manager to terminate the process and then the server runs better.
Any ideas?

I have not found an answer to this problem, though it hasn't been a problem lately. I now send the output of the vspider.exe process to a log file and can check the status of the index job. I index nightly, so if the process is running at anytime, I can look at the results of the index job in my log file. This might give some clues. I have a feeling I had a corrupt index and vspider was choking. Try rebuilding your index from scratch.

Similar Messages

  • defunct process when stop and start web server

    Dear all,
    I am using Sun One Web Server 6.1 SP6. When i try to stop and then start the web server. The <defunct> process is generated (his parent PID points to webservd).
    The following is the result:
    1st stop and start the web server (defunct process is generated)
    2nd stop and start the web server (defunct process disappears)
    3rd stop and start the web server(defunct process is generated)
    4th stop and start the web server (defunct process disappears)
    Here is my magnus.conf
    ServerID www
    ServerName www.abc.edu.hk
    ErrorLog /i03_01/SUNWwbsvr616/https-www/logs/errors
    PidLog /i03_01/SUNWwbsvr616/https-www/logs/pid
    User nobody
    DNS off
    Security off
    ClientLanguage en
    AdminLanguage en
    DefaultLanguage en
    RqThrottle 512
    StackSize 131072
    Init fn="load-modules" funcs="caspreq,caspinit,casptrans" shlib="/i03_01/casp/module/sunos5_optimized/netscape_6.x/nes_casp2.so"
    Init fn="caspinit" casplib="/i03_01/casp/asp-server-3078"
    Init fn="load-modules" funcs="htaccess-init,htaccess-find" shlib="/i03_01/SUNWwbsvr616/plugins/htaccess/htaccess.so"
    Init fn="htaccess-init"
    Init access="/i03_01/SUNWwbsvr616/https-www/logs/access" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% \"%Req->headers.referer%\" \"%Req->headers.user-agent%\"" fn="flex-init"
    Init fn="load-modules" shlib="/i03_01/SUNWwbsvr616/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
    TempDir /tmp/https-www-61c30017
    # Load modules for PHP
    Init fn="load-modules" funcs="php4_init,php4_execute,php4_auth_trans" shlib="/i03_01/SUNWwbsvr616/bin/libphp4.so"
    Init fn="php4_init" LateInit="yes" errorString="Failed to initialize PHP!" [php_ini="/i03_01/SUNWwbsvr616/https-www/config/php.ini"]
    # Enable statistics
    Init fn="stats-init" update-interval="5" virtual-servers="100" profiling="yes"
    any ideas? Thank

    - which OS & version are you running into this issue ?
    - By definition, defunct processes (or zombie processes) are processes that have exited prior to it's parent calling a wait() on it to get the return status .
    - couple of things I can think of to narrow down the cause of this issue
    1. disable ASP & php plugins and see if this still causes this issue
    2. try starting the web server with log level to finest and see fi you get any useful information from the server error logs
    hope this helps

  • Win7 x64 itunes*32.exe process hanged up and window not open

    sry,my english not good.
    windows 7 x64 and itunes 10.5, after install, itunes*32.exe(Not AppleMobileDeviceService.exe) process hanged up , cpu(1/4 cores) up to 100% .

    Sounds stupid, but this will actually work.
    1. Quit iTunes.
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> Right Click "Command Prompt" -> "Run as Administrator")
    3. Once in the command prompt, type "netsh winsock reset" and hit ENTER.
    4. Restart iTunes.
    Problem solved.
    At least this fixed it for me on my own Windows 7 x64 installation.  I had AppleMobileDevice.exe, APSDaemon.exe, and iTunes.exe all at 25% CPU simply from opening up iTunes.
    25% CPU for me is 100% CPU per core since I have 4 cores.

  • The Firefox.exe process hogs 25% of my CPU resources even after I've closed it.

    On a relatively consistent basis, when I close the Firefox windows I have open, the firefox.exe process doesn't end. When I go to open Firefox again later, I get the error message that I can't open Firefox because it's already running or not responding. When I look in Task Manager (on Windows 7 Home Premium 64-bit, BTW), the firefox.exe process is holding steady at 25% CPU usage along with whatever memory usage it already had consumed, even though the Tasks tab doesn't list Firefox as being open.
    == This happened ==
    A few times a week
    == I'm not exactly sure. It sort of just started on its own.

    Ed, this kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
    #run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
    #update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
    #disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
    #enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
    #you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
    Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
    #try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
    #do a virus/malware check on your computer. If this doesn't fix it, proceed;
    #disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
    #check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
    #check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
    #update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
    #clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can help you further.

  • Stop and restart rac resources

    what happends if we take down time start and restart the resources
    can any one explain on the above scenario in two node rac
    o/s windows
    version 10.2.0.4
    thanks in advance
    cheers

    what happends if we take down time start and restart the resources
    can any one explain on the above scenario in two node rac
    o/s windows
    version 10.2.0.4which resrouces you are talking about, is it CRS?
    are you asking if you restart on Test servers?
    It will down all the resources including if ASM & DB too..
    Thats why CRS start/stop permissions given to root user not oracle

  • Interactive form takes 10-15 minutes to open and exhausts system resources.

    The version of Livecycle designer am using is 7.1
    The interactive form that I designed is taking like 10-15 minutes to open and while its opening, its taking all the system resources as I see a prompt on the task bar besides time/date  "Virtual Memory Minimum Too Low".
    The tutorial project works fine, the TravelRequest.pdf opens just fine: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/offline%20interactive%20pdf%20form%20using%20download.pdf
    Would installing version 8.0 solve this ?
    I am on NWDS sp18.
    Thanks
    Tony

    Hi,
    Refer to the following blogs which explains the steps to improve the performance.
    Offline Part u2013 I /people/sankar.narayana/blog/2008/12/23/dynamic-generation-of-offline-adobe-interactive-forms-for-sap-46c-and-ep-70-without-user-intervention-part-150-i
    Offline Part u2013 II /people/sankar.narayana/blog/2008/12/30/dynamic-generation-of-offline-adobe-interactive-forms-for-sap-46c-and-ep-70-without-user-interventionpart-ii
    Adobe Performance : /people/ramesh.kotagiri/blog/2008/12/30/sap146s-magic-solution-to-obtain-amazing-performance-of-dynamic-adobe-interactive-forms-using-zci-forms-zero-client-installation
    Installing the Adobe 8.0 also improves the performance.
    Thanks & Regards,
    Jhansi Miryala

  • Why the video playback stotter but audio is ok and all system resources are ok as well?

    Hi,
    I'm using Premiere Elements 12 and prepared a project using m2ts files of my sony camera. When I started the project, everything was find, editing easy. Now, some months later I wanted to finish the project on the same laptop ( Intel Cor i5-4200 2,50GHz, 8GB RAM, 64 bit Windwos 8.1, 1TB Hybrid HDD, dual graphic: Intel HD Graphics 4600 and NVIDIA GeForce GT740M). The system resources are not completly used during the playback, maybe 10 - 15% usage, RAM is between 20 and 50% usage, harddrive usage is between 10 and 40% usage. Video data are stored local on the harddrive (not on USB or network).
    When I open the original files in e.g. VLC or Media Player the playback is perfect, no interupts. The playback of rendered elements in Premiere Elements is without interupts as well. Only "native", untouched HD material stotters after a short time I'm working on the project. It's the same for other videos, when I start a new project. It's anoying me because it was the reason why I decided for the SW.
    I deinstalled Premiere Elements completly, used also CCleaner to remove unused registry entries... reinstalled it completly after some restarts... updated to 12.1.0.0 but after an afternoon of installation, the same issue is back.
    Who can help me to fix it? Thanks for your feedback.

    Player version 7.1.6 is a very old version but it should play H264 / AAC videos without issue.
    http://support.apple.com/kb/DL837?viewlocale=en_US&locale=en_US a link for a more modern version.

  • Hi, I am prompted to download the latest  Tunes software (10.7) but after starting the process is stopped and the massage says "Errors occured while installing, if the problem persists choose Tools download only) This process also stops part way through

    Hi, I am prompted to download the latest I Tunes software (10.7) (I have done this sucessfully for other versions many times before)
    The process starts but stops quite quickly.A message pops up "Errors have occured while installing updates, if the problem persists choose Tools>Download Only and install manually" When I try this it still fails but another message pops up "Invalid signature, the download has been removed"
    Not very sharp on computers so any help would be appreciated.
    Regards

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Process chain stopped and unable to trigger next process

    Hi all , i am working on process chains, today process completed at DTP and the next process at activation of dso process failed and the rest of the pc completed even though the activation process is red. after the completion of that , chain process stopped, next pc didnt started.  plz help me wiht this, thanks in advance..

    you can evaluate a local chain as 'green' even if one of the steps is 'red'. in the planning view of the process chain, go to process chain --> attributes --> process status valuation. flag the checkbox. this will enable the next pc to start even after a red status of the local chain...
    detailed info:
    Red Outcome Renders Chain Green If Process Is Red
    If errors are raised for processes that have scheduled an event "With Errors" they are judged as successful for the determination of the overall status of the chain run.
    Use
    If this indicator is set, all the processes in this chain with errors are judged as successful with regard to the overall status of the run, if they have scheduled a successor process "With Errors" or "Always".
    Dependencies
    Mailing and alerting is not affected by this indicator. This is also triggered for processes with errors if this has a successor process "With Errors".
    Example
    You use this indicator in meta-chains to evaluate the run of a subchain as successful in spite of errors in "unimportant" processes. The successors to this process are "always" scheduled, while the successors to key processes are only scheduled "With Success".
    Accordingly, successors in the subchain within the meta-chain are only scheduled "With Success"; however they do continue to run if errors have only occurred in the unimportant processes of the subchain.

  • IMAP processes never stopped on my ISP

    Hello everyone,
    My emails are in IMAP, the accounts are hosted on planethoster.net or hostgator.com on linux, different versions and brands (redhat...).
    Apple Mail (=AM) has problems to close IMAP processes, the IMAP processes stay for 10+ minutes active on the server!
    We must use IMAP, not pop.
    I do not want to use another mail client because Apple Mail is very reliable.
    Here are more details for ONE email account, on planethoster.net, using dovecot and centos 6.5 with all updates.
    Account Settings in AM:
    - Path: IMAP
    - Port 993 + SSL
    - Authentification by password
    - Use IDLE.
    and
    - Port 465 + SLL + Auth by password.
    When you open AM (or re/connect the account) it takes 4 processes!
    31697          (imap)          /usr/libexec/dovecot/imap          /home/userdoe/mail/johnsite.com/support          dovecot/imap
    These 4 processes will stay ~until you quit AM.
    If you quit AM, these 4 processes are still running for at least 15 minutes.
    If you kill the new/current ones from the server dashboard, they reappear immediately, normal...
    Reopen AM immediately and you will see 4 old + 4 new processes for the same email account!
    To close them with AM, you must first use the menu ~"Mailboxes-disconnect" (or similar) before quitting.
    In that case, the 4 processes disappear a bit faster from the server.
    The problem is that ISP allow a limited number of processes (25 on Hostgator) that has to be shared between
    all operations : web, ftp, emails, cpanel...
    With my 2 ISP/host supports help, searches on the net, different settings on mac or server, various config tests, reseting, restart, update, delete
    whatever... nothing changes. It is like that for at least Mac OS X 10.7.
    I already sent several detailed bug reports to Apple several years, 16+ months... ago without any change.
    Do the same tests with
    - Thunderbird : 1 process, closed immediately on quit.
    - M$ Outlook Window$ : 2 processes, closed almost immediately on quit.
    If you have a solution or if you can 'shake' the apple team in charge :-) I will send you a huge box of chocolate from Belgium.
    Thanks,

    In Preferences for Mail (accounts / advanced), did you put on the checkbox for "removing mail from server"?
    I have only POP and .Mac accounts so I cannot check which options are available there for IMAP accounts

  • First time capsule backup never stops and shows insane progress numbers

    We've bought a 1TB time capsule and are trying to get the first backup done.
    It's backed up a lot of the first Mac (a MacBook Pro with a 200GB drive with about 170GB used).
    Because we did it over the wireless LAN this took a long time, and it went away more than once, requiring a backup restart. (By "went away", the MacBook lost connectivity to the time capsule a few times, requiring a Mac reboot to fix, and our AirPort actually crashed once.)
    After a few iterations it gets to apparently being nearly done. However, it now never completes. It says (after a very long indexing period) "backing up 128MB of 128MB" and both those numbers slowly count upward. Forever. We've done tens of GB in this way - there's no indication of what really remains to be backed up or what is actually being backed up, such a log window of filenames.
    We are at an utter loss as to what is wrong or whether we're close to success at all.

    Hi, and welcome to the forums.
    It sounds like your main problem is a bad WIFI connection. Time Machine should be able to recover from a failed or interrupted backup, but it can take a long time, even if your WIFI is working well, as it may have to spend a lot of time figuring out where it was.
    I'd suggest cancelling the backup and connecting your Mac to the TC via an Ethernet cable until you can get the first backup completed. It's much faster, even when your WIFI is working well.
    Once that's done, you can try to improve the wireless connection, and address the other problem.
    The ever-increasing size is likely a result of other changes being made to your Mac during the backup. After the first "pass," TM checks for this, and will do a second pass. Normally, of course, this is very small and quick, but some things can cause what you're seeing. Unfortunately, it's difficult to diagnose until you get that first backup completed -- if it continues to happen on subsequent backups, you can see just what's being backed-up. See #9 in the Frequently Asked Questions *User Tip,* also at the top of this forum, for some common apps that can cause this, and a way to determine just what it is.

  • Makes too much noise as soon as I switch it on and never stops and takes a long time to shut down

    Makes too much irritating background noise that makes it impossible to record the audio for my videos

    Hi,
    May I know thw error code displayed in the problematic wan miniport drivers? Code 720 as in the link you post above or other error code?
    This link can be helpful for further troubleshooting (please create a restore point before making changs to the system in case any incorrect operations can cause unexpected issue)
    Fix Broken Wan miniports
    http://community.spiceworks.com/how_to/show/55611-fix-broken-wan-miniports
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • Process Order tables and Production System Performance

    Hi All,
    What are the different tables of Process order? Also how do i know which table affects the system performance of Production system and to what extent if Change Logging is made active ?
    The issue is in our clients place we would like to set the Change Logging ( Records changes made for any transaction )  for Process orders and we would like to know to which tables change logging should be made active so that Production system performance is not affected.
    Please help me regarding this.
    Thanks in Advance,
    Neetha Avani.

    All the changes done in any transaction are saved in CDPOS table.
    when there is any report developed based on this table then the performance will be very slow.
    Tables used for process orders are
    AFKO            Order header data PP orders
    AFPO            Order item
    AFRU            Order Confirmations
    AFRUHR        Order Confirmations for HR
    AFRV             Confirmation pool
    AFVC             Operation within an order
    Hope the above helps.

  • Return process in vendor and customer systems

    Hi experts,
    here is the scenario:
    A customer returns a prdouct he received from vendor on account of quality defects.
    What is the standard process followed by industry for this return scenario both in customer and vendor R/3 systems?
    Does customer sends any ASN or IDOC or any other communication to the Vendor along with the returned products?
    If the vendor receives any communication in form of IDOC or ASN then how does he comes to know that the customer has sent a return delivery?

    Hi,
    This is a SD process ie to make a return sale order i think order type is RE do delivery for SO and PGR and  items will be stock.
    Thanks
    suresh

  • KDE 4.13 Baloo sucking system resources.

    Its a feature not a bug I suppose, but not kind to any system. I followed the 'add your home' to the exclude list, but the thing still hammers away and there are multiple process going on from baloo/akonadi that I needed stopped. So I renamed the binaries - stopped them from running for now. Surely a method to completely disable this short of switching from KDE to Gnome or something else has to be available?
    When trying to remove baloo, the result is this: http://pastebin.com/RvuKgYzp .
    That is not something I'm willing to do as I installed this Arch Linux and use KDE as my primary desktop since Jan 2012. Over 2 years of excellent stuff IMHO, but forcing users to run software for the sake of the few who really don't mind their hard drives thrashing about, indexing all manner of files is utter nonsense. Maybe Openbox will be my fallback..
    rant off...
    Peace be with you all mostly.
    V/R,
    Nomasteryoda

    mangus wrote:
    I feel you. That's unfortunate and uncalled for. Why KDE is forcing me using a useless, buggy, unpolished and unfinished file indexer,
    in 2014 and SSD hard disks age is beyond my comprehension. I tried a 'fake' baloo package but didn't work as dolphin some of its libs linked to it.
    New kde is laggy and I have a powerful gaming rig.
    Opensource world is really in a bad state with gnome in tragic conditions, Linus Torvalds having hard time to find volunteers, and the only improvement
    you see in KDE is this...If someone find a graceful way to disable this **** without downgrade, recompiling or renaming binaries please let us know.
    Sorry, the more I write the more I'm getting pissed
    edit:
    just saw Andrea response , I'll try that but , seriously, this is a hack. How can someone release something like that? ( I mean KDE, not Andrea work obviously)
    edit2:
    this in baloofilerc seems to restore old dolphin behaviour
    [Basic Settings]
    Indexing-Enabled=false
    What has worked for me on several machines is to run the current pacman update, and then do the following. Then logout and back in to kde. Then go to the kde system settings and into Desktop Search, and simply add the user home directory to the list not to search.  Apply the changed setting, and then logout and back in (there will be a slight delay to the logout process at this point due to the initial baloo processes running but just wait out the half minute or so till it logs out). There will be a baloo file cleaner process running when you log back in, which on my machines seemed to run for a few minutes and then stop. At that point if you check the file:
    $ cat .kde4/share/config/baloofilerc
    you will see at the top that there are already the lines:
    [Basic Settings]
    Indexing-Enabled=false
    [General]
    several other lines after this.....
    At that point baloo quietens down and there are no further issues with baloo but you need to have a little patience during the initial running of the processes mentioned above, so it is a short term issue only.
    I have seen a gentoo thread which suggests that allowing baloo to index email does give a very efficient search even for tens of thousands of mails, but of course the initial indexing process does take a little time and CPU cycles - but once that is complete then it is suggested that it works extremely well. That would only be useful for local email - if you are connecting to remote imap then there is no point in indexing locally.  However I believe that the baloo indexing is very efficient, though it is not clear to me how detailed the search for a particular local email would be, or what parts of the email would be searchable (eg only text in the subject as usual or text across the body?), or which mail clients are set up to use the baloo index data?
    Last edited by mcloaked (2014-04-19 15:33:52)

Maybe you are looking for