Verizon Update 2/3/2013 requires re-boot

Just updated iPhone 5 with Verizon update.
It bricked one iPhone, but a reboot solved the problem. The second iPhone updated without incident.
If your iPhone is stuck "searching" where Verizon and the connection bars should be (top left of screen) re-boot.

Tiffany5043 wrote:
I have had so many issues since I updated phone to this software.  I can't send email through my account....can't even locate the aol account to delete it.  I will attempt the store to troubleshoot.  Lesson learned. ....should have left the phone alone and never done the software update!!!!!!!!!  Other issue is that I was attempting download of the forum and it needs wi-fi to download....that never was an issue either......can't even delete the attempt to download!  Very frustrating...
I can see why that issue would be frustrating. I would like to help with this issue. What is happening when you try to send email? Also, you said you can't locate your AOL account. Have you looked in Settings>Accounts? It should list any email accounts you have setup there. If it is not there, try clearing your cache from your email. Settings>Applications>Manage Applications>All>Email>Clear data/cache. Then try to setup your email again. 
What size file were you trying to download? 

Similar Messages

  • Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

    I just Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

    dunno, Lynn--maybe Etrecheck. trying running disk utility to verify the status of your hard drive. That may give you a basic idea. Perhaps tech tool pro.  As for it running hot, I can't say for sure. try shutting it down and using a vacuum clearner +crevice tool around the back of it.  It's been my experience that hard drives usually fail without a lot of warning, luckily you have a backup. Afterwards you can say "Yup, that went bad".  I've done a little research and found out that your MacBook Pro doesn't come with a conventional hard drive as such, but an SSD (solid state device) . It's upgradeable (up to 1 TB ) but not cheaply
    go here for more info (OWC) :http://eshop.macsales.com. For right now, I'd recommend resetting the SMC/PMU, maybe zapping the pram . to do that, reboot, hold down Apple+Option, P+R keys while rebooting. Hold down for 3 chimes, let go and let it boot. as for the SMC thing....
    I'm assuming your battery isn't removeable-shut down computer, plug in MagSafe cable . On built in keyboard, on left side, press Shift-Control-Option and power button at the same time.  release all the keys and the power button. press power button again to turn on computer
    that is all
    John b

  • Windows Updates for SharePoint 2013 Environment

    Hi
    I created a visual machine for SharePoint 2013 development by following steps mentioned below.
    --Install Winows Server 2008 R2
    --SQL Server 2008 R2
    --SP2 for SQL Server 2008 R2
    --SP1 for Winows Server 2008 R2 
    --Sharepoint 2013 Pre-Requisites
    --Sharepoint 2013 Setup
    --Sharepoint 2013 Designer
    --Installed March and August 2013 Cumulative Updates for SharePoint 2013
    --Installed SP1 for SharePoint 2013
    I want to ask do i need to install Windows Updates after installing different updates as i mentioned above because everty now and then windows updates message keep pops up and i did'nt install windows updates yet.
    Why is it necessary or what impact window updates would have on my environment if i need to do it??

    Windows Updates cover security updates as well as stability improvements, and so on. You're simply patching SharePoint and SQL in the above case.
    It should be noted that any SharePoint patches that come down through Windows Update need to be manually handled as you'll need to run the Config Wizard (e.g. MS14-022 and MS14-050 which are SharePoint updates).
    When you're installing SharePoint 2013, you only need to install SP1 if that is your target. There is no requirement to install March 2013 or August 2013.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to removing a pending update that is preventing a successful boot

    Hi,
    For an unknown reason (my guess is an update was automatically applied and automatically restarted), my computer rebooted overnight and in the morning was stuck in a failed boot loop.  When trying to boot I get the message:
    "Preparing to configure windows"
    "Do not turn off your computer"
    Then after a few seconds the computer reboots and does the same thing.  Safe mode yields the same result.  Using the F8 option to restore last known good configuration doesn't change anything.  I can boot into the recovery console.
    I have tried running SFC /SCANNOW in a command prompt in the recovery console and get the message:
    "There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
    Restarting of course doesn't change anything.  So it seems something happened to an unfinished update and is still pending.  I think if I can remove this pending update I might be able to boot normally, or at least run SFC and hopefully then boot
    normally.
    Does anyone know what I should try to remove this pending update that appears to be preventing a successful boot?
    Thanks!

    Hello deuce_mn,
    This is the command to run when booted offline at a recovery command prompt
    dism.exe /image:C:\ /cleanup-image /revertpendingactions
    This is supposed to revert all pended updates, however if System Restore is not working, then there may be other issues as well
    Thanks, Darrell Gorter This posting is provided "AS IS" with no warranties, and confers no rights. VAMT - Volume Activation Management Tool - Download link http://www.microsoft.com/downloads/details.aspx?FamilyID=ec7156d2-2864-49ee-bfcb-777b898ad582&displaylang=en
    I'm thinking this may help with a similar problem I'm having with SP1 (fatal error applying update during boot).  I noticed that when I'm at the recovery command prompt, the system image is moved to E: vs. C:.  Will DISM work in this case & will
    it restore my System Image, pre-SP1 failure, to C:?  Also, does it matter whether I run the recovery command prompt from the current installation or do I need to start from the original install media?  Oh, one more question...  When I installed
    Windows 7x64, I used a minimal unattend.xml file to force all User Profiles to another, non-system, disk drive, currently D:.  Both my system drive & user profile/data drive appear unharmed so far.

  • SUM and upgrade to EHP Updates to Suite 2013 SP06

    Dear Gurus
    According to OSS note 2081050 - Upgrades and EHP Updates to Suite 2013 SP06, an upgrade to Suite7i2013 SP06 requires the new Support Release 2 DVDs to be used (will be available soon).
    Why Stack upgrade requires DVD? As i know in case of stack upgrade, shadow instance is built as a copy ( dbclone) of existing repository. Upgrade export DVD are in use in case of release update only.
    Can somebody explain what happens?
    Regards
    Vladimir Kogan

    Hi Boris,
    I have a similar issue with SRM upgrade from SRM 5.0/NW7.0 to SRM 7.0 EHP3 SP06/NW7.40.
    I have generated a stack file via MOpz and the stack file contains DVD:
    <dvd caption="BS7I2013_SR1_UPGRADE: EHP3 FOR SAP SRM 7.0 - Stack 03" id="f80b9f40-3741-11e3-b198-005056a204ff" type="upgrade">
    With the availability of Support Release 2, the DVDs of the predecessor Support Release 1 have been archived. I cannot find DVD for BS7I2013_SR1_UPGRADE
    Why SUM requests the DVD and why requests BS7I2013_SR1_UPGRADE?
    Should be requested  BS7I2013_SR2_UPGRADE, or not?
    2081050 - Upgrades and EHP Updates to Suite 2013 SP06 --> Upgrade was released at 05.12.2014
    I have attached stack.xml and stack.txt
    Could you please check and help?
    Thank you
    Rupert Kovacs

  • My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on.

    My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on. I have the little arrow that normally selects my AppleTV in iTunes but AppleTV is no longer listed (only My Computer). Is there an issue with the latest update. This is probably my fault by telling everyone how good AppleTV is and that it just works! Doesn't work any more :-( I have tried all the usual restarting of AppleTV and PCs. I'm having to revert back to the Samsung Blu-ray player's PC sharing :-(

    Restarted router(s) and it works again.

  • I have a Macbook pro 4,1 My Battery would not charge after only 23 cycles. I tried the battery update now my macbook will not boot. it has a kernel panic Unable to find driver for this platform:

    Macbook 4,1
    Early 2008 15" macbook pro
    Running Snow Leopard
    the Battery was not working after only 23 cycles
    I tried the Battery update and now it will not boot at all
    I really do not want to loose my data on the drive
    panic message is
    Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
    Please help

    Panic Message
    panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
    "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
    Debugger called: <panic>
    Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
    (7 lines of hex)
    BSD Process name corresponding to current thread: Unkonwn
    Kernel version:
    Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
    I tried to boot from CD can, but i dont want to loose any information.
    Tried disk tools
    Hardware test
    Tried to check if it was memory sticks failing or battery , nothing else plugged in
    if i boot holding Apple key and S
    I get additional warnings about AppleACPIPlatform and not being able to load Kext

  • Hi apple, I have currently got a visa $50 gift card. I put it on my iTunes account I have currently ran out of funds on the card. Now even when I try to download free apps or even update, it says it requires a new credit card. Is there a way around this?

    Hi apple, I have currently got a visa $50 gift card. I put it on my iTunes account I have currently ran out of funds on the card. Now even when I try to download free apps or even update, it says it requires a new credit card. Is there a way around this

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    If you have a credit card on your account then it needs to be valid. Have you tried removing it from yoru account ? On your iPad try tapping on your id in Settings > Store (Settings > iTunes & App Store on iOS 6+) and selecting 'View Apple ID' on the popup - that should give you a payments link on your account's page.

  • Why won't My Verizon update usage reports?

    Why won't My Verizon update usage reports?

        Hi piddle1976 - We always want to keep you informed! How long has it been since the reports updated? When is your normal bill cycle?
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Manually triggering updates in Office 2013

    Hi,
    Does anybody know how to manually trigger an update in Office 2013?
    How to update immediately rather than auto /
    scheduled?
    Updating via Windows/Microsoft Updates doesn't seem to work??
    Many thanks.

    I found that if you do the following you can always trigger manual updates for Office 2013.
    In the registry go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\15.0\ClickToRun\propertyBag"
    Add a string value named "updatetoversion" and set the data to your desired version (must be a recognized version in http://support.microsoft.com/gp/office-2013-click-to-run)
    such as 15.0.4551.1512.  This is KEY in making this work.
    Make the following values are set to something that starts with http://officecdn.microsoft.com so that the updates are grabbed from Microsoft. 
    Here are what mine are set to (removed product ID just in case yours is different).
    ***All values are found in key location outlined in step 1.    
    - “baseurl” = “http://officecdn.microsoft.com/pr/<Product ID>/Office/Data/15.0.4517.1005”
    (This version was my base version at install, do not change it if already set. 
    If not, set to whatever your base version was at install)
    - “updatebaseurl” = “http://officecdn.microsoft.com” 
    (Make sure this one matches)
    - “wwwbaseurl” = “http://officecdn.microsoft.com/pr/<Product ID>”
    To Find your Product ID go to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\15.0\ClickToRun\ProductReleaseIDs\Active\Stream"
    You will see value names that include the path of your install. 
    Don’t use that ID, look at what the data of that key is set to. 
    Such as “http://officecdn.microsoft.com/pr/<Product ID>/Office/Data/15.0.4551.1011/stream.x64.en-us.dat” and pull out your Product ID. 
    Ensure all the keys in Step 3 are in the format I listed but with YOUR Product’s ID in place of <Product ID>.
    Now run the batch file that has the following content. 
    (Use ClientX86 for 32-bit)
    cd "C:\Program Files\Microsoft Office 15\ClientX64"
    integratedoffice.exe updatedetection
    integratedoffice.exe updatedownloadprompt
    If it does not work correctly every time, break into 2 batch files and run one right after the other.
    Batch file 1
    cd "C:\Program Files\Microsoft Office 15\ClientX64"
    integratedoffice.exe updatedetection
    Batch file 2
    cd "C:\Program Files\Microsoft Office 15\ClientX64"
    integratedoffice.exe updatedownloadprompt
    Good luck!

  • Droid killed by verizon update?

    Has anyone had their Droid quit working recently after a verizon update?  My back button quit working and it has continued to get worse within the last week. No longer really functional phone

    Re: BUG: Web Update KILLED by driver update in XPe There are two ways for the Creative software update to be installed. If you install the driver Cd on your system, then the webupdate gets installed on your system that way. If you install new drivers on your system, download from creative, it will be installed also. If you just unzip the files you got from the Creative download and just update the driver manually then the web update service does not get created.
    If you have winrar or winace or 7 zip, download the newest Creative driver. then right click the Creative executable. Extract the contents to a temp folder you can easily access. then go to the main root of that folder and run setup.exe. Right before the installation finishes you should see the autoupdater hang and then finish installing. Then reboot and see if the folder has been recreated.

  • Doubt about Scan and Update Catalog Objects That Require Updates link

    Hi,
    I have a doubt about 'Scan and Update Catalog Objects That Require Updates' link in Administration,
    how can I know how many objects that required upgrading before I click this link???
    in doc.
    http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750
    section 17.2.4 Updating Catalog Objects
    It is said 'You can confirm the need to update by viewing the metrics in Fusion Middleware Control. In the Catalog folder, find a metric called "Reads Needing Upgrade" with description "The number of objects read that required upgrading." '
    but I don't find it . my OBIEE version :11.1.1.6.2
    conld you pleae help me ??
    thank you in advance.

    That link should be there in 6 version.
    I've verified in 11g6 version doc the same is existing
    ref: http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/prescatadmin.htm#BAJDDFFI
    BTW:
    http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750is 11g7 version
    Thanks,
    http://cool-bi.com

  • Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

    Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

    Apps are tied to the Apple ID that was used to purchase them and you will always need to use that ID and password in order to update them.
    Saying that you do get to update them on your new details makes no sense at all.

  • I have the macbook 13 inch aluminum. However, I want to upgrade it to Lion. Since I have 10.5.8- How do I update it? The requirement is 10.6.

    I have the macbook 13 inch aluminum. However, I want to upgrade it to Lion. Since I have 10.5.8- How do I update it? The requirement is 10.6.

    To see how much RAM you have go to the Apple in the upper left corner and select About This Mac, then check Memory on More Info.
    For hard drive storage space right click (or Control+Click) on your hard drive icon and select Get Info then look at Capacity (which is the size of the hard drive) and Available (Which is the free space on the hard drive)
    The Late 2008 model 5,1 Aluminum Unibody can use up to 8gb of RAM http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Here's a video of how to install RAM http://eshop.macsales.com/installvideos/macbook_13_unibody/

  • 10.6.4 update failed. Now doesn't boot up

    Hi
    I have a serious problem. Updated to 10.6.4 and at the end of the installation I got "an error has occurred" message. After that I rebooted and a after a while it just turns off. Before the update I had no issues at all.
    Tried the disk tool and it found both permission errors and errors on the disk but isn't able to repair it. What should I do?
    Thanks
    Fredrik

    I work on a team supporting about 600+ Mac laptops. We're advising users to not upgrade.
    Installation of 10.6.4 via the Software Update is resulting in machines not booting up afterward for many of our users who tried to update. A verbose boot returns the message "Waiting for DSMOS" along with a stuck boot process.
    A 2-hour call with the Apple resulted in nothing helpful (ie - they had no idea what happened, why it happened, or how to solve it). We've had to do clean installs for those users.
    We've not yet encountered problems installing from the ComboUpdate.
    Edit: This has happened on a range of models of 15" and 17", including the new i5 and i7.

Maybe you are looking for