Version 8 sharing with Version 7

If I upgrade iTunes on my main computer to version 8, will I still be able to share my iTunes library with my other computer running iTunes version 7? I can't go any higher than OS 10.3.9 on that computer. Thanks so much if you can help me out!

Hi
Please re-phrase the question.
I have hard enough to understand English - so please make the meaning very easy to grasp.
Yours - wanting to understand - Bengt W

Similar Messages

HT4352 how do I do home sharing with version 11 of iTunes?

How do I do home sharing with version 11 of iTuess, Apple only tells me version 10.2

Morning Saintine,
Thanks for using Apple Support Communities.
Home Sharing enables you to stream or transfer music, movies, TV shows, apps, and more among up to five authorized computers in your household. To do so, you will need to Turn on Home Sharing on each computer using the same Apple ID.
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Hope this helps,
Mario

Installing new version 6 with version 5 on the machine

Can I install the new JDK version 6 and still leave my old version 5 on the machine? I would like to be able to use both of them for a short while. Thank you.

Thank you Joachim,
When I install version 6 can I just use the default installation locations without having an adverse effect on version 5?
Thank you again.

Can I use Apple TV (version 3 with IOS 5.1) Airplay to simultaneously to stream audio to another Apple TV without using itunes on my PC?

I have 2 Apple TV's version 3 with IOS 5.1 and would like them both to play the same music through Match simultaneousy but without having to use iTunes on my PC.
It seems I can only select one of them at a time for audio output, is there a way to make them both play at the same time?

tammersalem wrote:) <-HDMI-> (HDTV)
My main concerns are:
-If I use iTunes on my main computer, will it then be available to Apple TV?
-If I use Apple TV to download will it be available to my Main computer?
-Can the Apple TV use a media server for storage over LAN (using NTFS Samab or otherwise)?
Basically iTunes feeds AppleTv with media either syncing (copying to it) or streaming live.
Media must be compatible with AppleTV.
AppleTV requires a proper iTunes instance running - it cannot access a NAS directly.
If you store media in a folder on a NAS and it's part of the computer iTunes library (just stored on the NAS vs internal/external drive), then when running iTunes makes this content available to AppleTV.
Data will travel:
NAS > network > iTunes > network to AppleTV
As the path is potentially slower than internal/external attached drive > iTunes > network > AppleTV, it may or may not work robustly for streaming.
If AppleTv is set to sync (it can also stream in this mode), when you purchase direct on AppleTV, the media should sync back to where the itunes library is stored (via iTunes) to keep things in sync and to allow you to backup the media.
You cannot drag/drop media to/from AppleTv across the network, nor can it directly access storage itself - iTunes is an essential cog in the wheel.
The majority of commercial 'in-built iTunes media servers' will not work directly with AppleTV as it has to be 'paired' with iTunes by entering a numerical code in iTunes and does not simply see 'shared libraries'.

Dispatcher not starting up ::Shared library version mismatch

Hi,
System is SAP ECC 6.0, AIX and Oracle 10g.
We upgraded the Kernel Level from 201 to Level 221.
<hostname>/root$ su - <sid>adm
[YOU HAVE NEW MAIL]
.profile[30]: 1: not found.
<hostname>:sidadm> disp+work
disp+work information
kernel release                700
kernel make variant           700_REL
compiled on                   AIX 2 5 005DD9CD4C00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Aug 23 2009 20:51:38
update level                  0
patch number                  221
source id                     0.221
supported environment
database (SAP, table SVERS)   700
operating system
AIX 1 5
AIX 2 5
AIX 3 5
After upgrading the kernel dispatcher is not starting. Kindly find the below error:
sysno      10
sid        SID
systemid   324 (IBM RS/6000 with AIX)
relno      7000
patchlevel 0
patchno    221
intno      20050900
make:      single threaded, Unicode, 64 bit, optimized
pid        778402
Wed Nov 25 12:20:08 2009
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 778402) [dpxxdisp.c   1287]
DwSLCheckVersion: shared library version mismatch:
        shared lib "dw_xml.so" version 201 <-> kernel version 221
        shared lib "dw_xtc.so" version 201 <-> kernel version 221
        shared lib "dw_stl.so" version 201 <-> kernel version 221
        shared lib "dw_gui.so" version 201 <-> kernel version 221
        shared lib "dw_mdm.so" version 201 <-> kernel version 221
DP_FATAL_ERROR => Version mismatch of dw shared libraries detected. See dev_disp trace for details.
Set environment variable SAP_NO_SLIB_CHECK=1 to disable version checking.
DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 25 12:20:13 2009
NiISelect: TIMEOUT occured (5000ms)
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) [dpxxdisp.c   10510]
Kindly look into the issue. Looking forward for your reply.
Thanks,
Soumya

Soumya Saha wrote:
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) http://dpxxdisp.c 10510
The system appears to think that the dispatcher process may already be running. Stop all the SAP processes and run cleanipc to clear out the shared memory. I've seen this on AIX before where the shared memory will prevent SAP from starting back up and clearing these resolved the issue.
Hope that is helpful.
J. Haynes

Shahzad Pirzada seeks help with version as per PC configuration

Hello Guys,
I am Shahzad Pirzada. I have a Dual Core PC and I want to use the best adobe photoshop according to it's configuration. Can anyone here help me with this? Which is the best supportive version and what other requirements?
Thanks,
Shahzad Pirzada

Hello Gene,
Thanks for your reply. I just saw the document you shared with me. I can see that I need to upgrade my system a bit to use CS6 and it is really going to cost me a lot. Can't you suggest me any lower version that is available to purchase as well and is the best as per my PC configuration?
Let me tell you the configuration of my PC:
- 4 GB RAM
- Windows XP SP2
- 250 GB HD
- AMD 5200+ Processor
- ATI Graphics 256 MB
Please suggest the best with this configuration.
Thanks,
Shahzad Pirzada

Working with versions

Hello
We are working with GW 7.02 + DMS for many years and happy with it.
Recentlly one of our main customers start demanding that we "work" with Documents Validation" .
we start looking into working with versions and i have some questions :
1. Can create a rule that makes me create a new version when i try to
open a document ?
2. Can i "close" the possiabilty to edit the "previous" Version ?
Is there any good help to "working with versions" ?
Thanks
Beeri

1 - No rule I know of, you have to use Save As and then Save As New Version.
2 - In the Version Level Security part of the Sharing tab in document
properties, turn off Edit/Delete and Share for Other Versions
Cheers Dave
Dave Parkes [NSCS]
Occasionally resident at http://support-forums.novell.com/

[SOLVED] repo-add replaces newer version package with old ones

Say I have two versions of nspr.
$ ls -1 nspr*.pkg.tar.xz
nspr-4.10-2-x86_64.pkg.tar.xz
nspr-4.9.6-1-x86_64.pkg.tar.xz
When I run repo-add on both of them, version 4.9.6 will be the one remaining in the database.
$ repo-add custom.db.tar.gz nspr*.pkg.tar.xz
==> Extracting database to a temporary location...
==> Adding package 'nspr-4.10-2-x86_64.pkg.tar.xz'
-> Computing checksums...
-> Removing existing entry 'nspr-4.9.6-1'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
==> Adding package 'nspr-4.9.6-1-x86_64.pkg.tar.xz'
-> Computing checksums...
-> Removing existing entry 'nspr-4.10-2'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
==> Creating updated database file 'custom.db.tar.gz'
I think here the natural order should be used, something like
$ repo-add custom.db.tar.gz $(ls -v nspr*.pkg.tar.xz)
as this is the expected behaviour from most users.
Last edited by luran (2013-10-07 23:43:21)

karol wrote:When only one version of a package will ever be present in the db, why try adding more? Just pass the version you want. You can use 'ls -v' if you prefer, but I think it's the shell's interpretation of the wildcard and not repo-add to blame.
Thanks for your reply. Now I agree repo-add should just process the files according to the order given by the shell.
To anwser your question, I need to make a local repository regularly to be shared with my other machine, because I have a very limited Internet quota and the sharing roughly halves the downloads. Usally I just use the wildcard for all the packages in the cache, and it works fine as long as the package version does not jump to 10+ like the above example. 'ls -v' will do the job for me. Cleaning the old packages could be another option, but occasionally I need to revert some package back to an old version.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Problem with versioning on iPod, backwards compatibility issue with iTunes

i apologize in advance because i'm sure this has been asked time and time again, but i did attempt several searches.
the search function is very muddled and does not narrow down the results very well at all
here's the situation.
from all accounts i've heard lots of people having issues with version 7 of iTunes.
i'm a simple kinda guy who definitely believes in the age old phrase "if it ain't broke, don't fix it."
so i've stuck with v6.
i recently got a new laptop along with my PC. so i downloaded and installed the latest iTunes without thinking twice.
i had completely forgotten about my concerns from hear say about v7 issues.
i plugged in my iPod and it proceeded to completely erase all of the media on it and then load all media that was on my laptop in place of it.
"well that's a cool new feature", i thought.
after my initial frustration wore off, i immediately uninstalled v7, deleted the .itl file and installed v6.
everything was all fine and dandy. v6 works perfectly on the laptop with no hangups.
here comes the issue...
i plug in my iPod to begin rebuilding my media onto it after the completely unauthorized deletion, creditted to iTunes v7.
as it autoplays and iTunes v6 opens i'm prompted with this error:
"The iPod [my ipod] cannot be used because it requires iTunes version 7.0 or later.
Go to www.itunes.com to download the latest version of iTunes."
i've attempted everything i can think of to completely erase my iPod of any "versioning".
- i reset it using the "select/menu" button method
- i reformatted it through XP disk manager
- i reformatted it through context menu in my computer explorer window
- i completely just deleted the "iPod control" directory in the iPod explorer window when clicking through the my computer directory
i'm at a loss.
i cannot figure out a way to get my iPod to function with iTunes v6.
and again, i'm really hoping to avoid going to v7.
iPod information:
2nd generation iPod nano 4GB
thank you in advance for any and all information/advice

I am guessing that you used your iPod enough with iTunes v. 7.x to update the firmware to the latest version. That being the case, reformatting your iPod won't "undo" the firmware update, so your only choice now is to update your iTunes software to v. 7.x.
FWIW, iTunes 7 is a vast improvement over previous versions of iTunes. I use it on both Windows and OS X, and without bugs in both environments.

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running The backup file should be restored to a server with version '12.0.0.6318' or later.

am trying to restore the bak file into a new site collection in my sp 2010 standalone env.
am getting error
PS C:\Windows\system32> stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C:\mBKUPCOPY\Sharepoint_bankup.bak"
STSADM.EXE : Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running
the current version. The backup file should be restored to a server with version '12.0.0.6318' or later.
At line:1 char:1
+ stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C: ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Your backup is ...6318' or later.:String) [], RemoteException
+ FullyQualifiedErrorId : NativeCommandError

As stated in the other thread on this topic you can't restore a 2007 backup to 2010, it needs to be upgraded.
https://social.technet.microsoft.com/Forums/en-US/31c70f0a-5d89-4308-895b-af0c2b249114/restore-the-site-collection-from-moss-2007-to-sp-2010-site-collec?forum=sharepointadminprevious

Case #0182844369 : faults with version 5.5 but who do I talk to?

Hiya
I have had extensive help from your support - but they still have not found the reason for the problem.
See the case notes at the bottom of the page
But I have inadvertantly found the reason the line breaks are being altered by Dreamweaver. See this resoponse from support working on Kaleidoscope:
Hi Colin,
Sorry for the confusion. When I said "editor", I meant the program that you're using to edit the files (BBEdit, TextEdit, etc.).
I've played around with the sample files and it looks like there's actually two problems. The first is the extra line breaks, as I mentioned before. I took a screenshot in TextEdit, so you could see a side-by-side (see screenshot-linebreak.png). As you can see, cw-product.php on the left has an extra blank line between every line, where cw-product-copy.php does not.
Switching over to TextWrangler, I removed the extra lines (do a grep Find/Replace All for ^\r) then saved the file. When I compared them in Kaleidoscope I got the same result as in your screenshot showing the entire file as different.
So I checked the files again in TextWrangler and found that it did a funny thing; it saved the document with "Windows (CRLF)" linefeeds, not "Classic Mac (CR)". Although these are hidden characters, Kaleidoscope sees them as different, so it ends up highlighting the entire file as one large diff set. I suspect whatever file editor you are using may have done the same thing.
I re-saved the file, making sure to set the linefeed property to Classic Mac (CR) and ran a new comparison. This time Kaleidoscope showed the single line change. (My modified files are attached.)
If you don't already have TextWrangler, I'd recommend grabbing a copy (it's free) to help with troubleshooting. I'm not sure that I would have been able to identify the linefeed type without it.
I hope that clears up the mystery for you. Let me know if there's anything else I can help you with.
Regards
Jack
Team Kaleidoscope
kaleidoscopeapp.com
@kaleidoscopeapp
Case #0182844369
Updated
Friday, February 3, 2012 5:16:20 AM PST
Opened
Thursday, December 8, 2011 8:54:04 AM PST
Status
Closed
Product
Adobe Design Premium CS5.5
Support contract
Adobe Support Program
Subject
FTP Connectivity Issue
NOTES & RESPONSES
Notes from Customer
Thursday, February 2, 2012 12:55:31 AM PST
This morning I have now found that 5.5 is back to it's original problem.
When I uploaded an edited PHP file using 5.5 NOTHING appears in the browser at all.
When I upload EXACTLY the same file in 5.0 the file displays perfectly in the browser.
The FTP problem is STILL there. I can't use 5.5.
Sorry. Problem not solved : (
Notes from Customer
Thursday, February 2, 2012 12:53:13 AM PST
I have found that when we rebuilt the SITE for Maison, I had accidentally put the ROOT DIRECTORY AS / instead of /web/ so in fact we
were not putting them to the website at all.
So the reason the file worked is because it was using the one previously uploaded from version 5 and NOT 5.5.
I have been trying to upload another file and found that the revisions weren't appearing in the browser.
I looked at the server using Fetch (see screen shot below). Which displayed the problem.
So I am afraid the problem is NOT SOLVED.
Please keep the case open. Sorry!
Notes from Customer
Thursday, January 19, 2012 1:42:46 PM PST
Hi again,
I have now installed ONLY a brand new download of DW 5.5 on my brand new MacBookAir.
As before I have tried uploading the file from Dreamweaver...
http://www.maisonhomeinteriors.com/ stores5-5.php
When the file is uploaded with Dreamweaver the button does NOTHING.
But when the IDENTICAL FILE is uploaded with FETCH the button works to display a hidden DIV.
So sadly the problem is NOT resolved still.
Notes from Customer
Wednesday, January 18, 2012 8:29:26 AM PST
Hiya,
I have been trying to connect to this website ALL DAY. Each time getting error messages or pages not found.
I have tried to phone you. The first time I was cut off, the second time kept me hanging on so long I gave up.
Can you give me a direct phone or email address please?
Anyway, Attached is the error I received when I first used DW 5.5 after installing on my new MacPro. I have now also bought a new ma
c book air, I had exactly the same error shown there.
To fix the problem on the MacPro I looked up the older version 5 and copied the file to version 5.5. Perhaps this is what has caused
the problem?
Notes from Customer
Monday, January 9, 2012 6:27:50 AM PST
Hi Ritesh,
I am not sure where you have left the voicemail but as before I have no missed calls. Are you sure you are calling the correct numbe
r? +44 7720 297795.
As I said in my previous reply the list of suggestions didn't make any difference. Dreamweaver 5.5 is STILL unreliable.
The problem seems to be in the FTP as I have uploaded the file through FETCH and it did NOT have any problems. I find it hard to ima
gine other people have not had the same problem!
I hope you can find a solution soon as it would appear I have wasted about £300 for nothing as I am still using the old version!
Notes to Customer
Monday, January 9, 2012 5:31:15 AM PST
Hi Colin ,
My name is Ritesh & calling from Adobe Technical Support. This
call is in regards to your to case number 182844369. We tried contacting
to you however not able reach you somehow so left a voice mail. However,
if the issue still persists, please feel free to call us back at 1-
800-833-6687 or 02073650735. We are open from Monday to Friday at 9 AM
to 5 PMT BST as you can reopen the case within 14 days for further
assistance.
Thank you for doing business with Adobe and have a nice day
Regards,
Ritesh
Adobe Support
Notes from Customer
Sunday, January 1, 2012 5:05:10 AM PST
Hiya,
Well I have tried everything you suggest and I am afraid it has made no difference.
Whichever file gets uploaded using version 5.5 does not work.
Interestingly I have uploaded the SAME two files using FETCH instead and both of them WORK.
So as you say the problem is something to do with FTP not working properly in 5.5...
To answer your specific questions... My ANSWERS IN CAPS AFTER YOUR QUERIES...
3) Since when you have this issue? has it ever worked right after the first installation.
EVER SINCE I INSTALLED 5.5 VERSION 5 WORKS FINE STILL
4) Is the issue happens in live View in Dreamweaver?
IN VERSION 5 CLICKING LIVE VIEW DOES NOTHING.
IN VERSION 5.5 CLICKING IT OFFERS TO UPLOAD THE FILES, BUT CLICKING THE BUTTON DOESN'T WORK
5) Please create a local web server using any of the third party server tools and test the issue on local machine.
I HAVE NEVER MANAGED TO DO THIS SO NOT TRYING AGAIN, IT NEVER SEEMS TO WORK FOR SOME REASON
6) Please make sure that all the dependent files are accessible and present while he uploads the “stores.php” files. IT seems that t
his issue is somewhere related to the JavaScript files incorrect path.
NOT SURE I AGREE. I THINK THERE IS A FAULT IN THE FTP UPLOAD WITH VERSION 5.5
I hope this all helps!
Thanks for your support!
Happy new year!
x
Notes to Customer
Thursday, December 29, 2011 4:48:03 AM PST
Hi Colin ,
My name is Ritesh & I am calling from Adobe Technical Support.
This call is in regards to your to case number 182844369. We tried
contacting to you however not able reach you somehow so left a voice
mail.
1) We were unable to reproduce the issue on test machine here at our
end. We have tried it with both WIN (stores5_5_win.php) and MA
C(stores5_5_mac.php) to upload the files using CS5.5 and have no issues viewing the page in any of the browsers.
Please follow these steps to resolve the issue:-
1) Please reset the preferences by deleting the files and folders listed
below.
• /Users/**username**/Library/Preferences/Adobe Dreamweaver CS5.5 Prefs
/Users/**username**/Library/Preferences/com.adobe.Dreamweaver.11.5.plist
• /Users/**username**/Library/Application Support/Adobe/Dreamweaver
CS5.5
• /Users/**username**/Library/Application Support/Caches/
com.adobe.Dreamweaver.11.5
• Macintosh /Library/Preferences/ Application Support/Adobe/Dreamweaver
CS5.5 Prefs (if any)
• Macintosh /Library/Preferences/com.adobe.Dreamweaver.11.5.plist
3) Since when you have this issue? has it ever worked right after the
first installation.
4) Is the issue happens in live View in Dreamweaver?
5) Please create a local web server using any of the third party server
tools and test the issue on local machine.
6) Please make sure that all the dependent files are accessible and
present while he uploads the “stores.php” files. IT seems that this
issue is somewhere related to the JavaScript files incorrect path.
However, if the issue still persists, please feel free to call us back
at 1- 800-833-6687 or 02073650735. We are open from Monday to Friday at
9 AM to 5 PMT BST as you can reopen the case within 14 days for further
assistance.
Thank you for doing business with Adobe and have a nice day
Regards,
Ritesh
Adobe Support
Notes from Customer
Tuesday, December 27, 2011 1:36:41 PM PST
Hi Nimish,
Thank you for your reply, but I really don't know wht I am meant to do with the response!
You say:
Please call us at 800 833 6687 ( Monday to Friday, from 0500 hrs till
1900 hrs PST.)
What is the code for where you are? If I dial this number all I get is number unobtainable.
PLEASE CALL ME +44 7720 297795
This number should work world wide unlike yours, I am afraid.
PLEASE REALISE THERE ARE PEOPLE IN THE WORLD OUTSIDE USA !!!!!
You keep saying you have phoned me and got through to my voicemail - but why have you not left me a message?
Frankly I don't think you have successfully contacted me at all !
Why can't you just email me with instructions about what I am mean to do?
Have you found a solution yet?
I am SERIOUSLY fed up with this.
Please endeavour to contact me properly!
Kind regards
Colin
Notes from Customer
Thursday, December 22, 2011 1:10:48 AM PST
Hiya,
I have heard nothing from you! what is happening?
Why have I been left with a BRAND NEW PRODUCT that does not work.
Where is the support?
You say you have phoned but I have NO missed calls. I think you are phoning the wrong number. If you got through to voicemail why no
t leave a message?
PLEASE HELP !!!!!
I Bought the upgrade in good faith expecting it to work, but I can't use it at all. This is hopeless!
I have done everything you suggested but it STILL uploads creating a non-working file!
If there is nothing you can do I would like my money back please.
Notes to Customer
Thursday, December 15, 2011 3:38:36 PM PST
Hello Colin,
Thank you for contacting Adobe Technical Support. We are responding in
reference to your case 182844369 regarding Dreamweaver We tried
contacting you however reached voice mail. Therefore I would like to
inform you that asper your feedback we are again escalating the case to
the higher level.
Please call us at 800 833 6687 ( Monday to Friday, from 0500 hrs till
1900 hrs PST.)
You can also visit www.adobe.com/go/supportportal for any assistance
regarding Adobe products. You may also visit www.forums.adobe.com as
it’s a useful resource for self-help.
Nimish
Adobe
Notes to Customer
Thursday, December 15, 2011 10:50:35 AM PST
Hello Colin,
Thank you for contacting Adobe Technical Support. We are responding in
reference to your case 182844369 regarding Launch issue with Flash Pro
We tried contacting you however reached voice mail. Therefore I would
like to inform you that asper your feedback we are again escalating the
case to the higher level.
Please call us at 800 833 6687 ( Monday to Friday, from 0500 hrs till
1900 hrs PST.)
You can also visit www.adobe.com/go/supportportal for any assistance
regarding Adobe products. You may also visit www.forums.adobe.com as
it’s a useful resource for self-help.
Nimish
Adobe
Notes from Customer
Thursday, December 15, 2011 2:49:14 AM PST
Hiya
Well I have tried all you suggest and the problem is still the same. The OLD version 5 uploads the file perfectly and clicking the b
utton reveals the div:
http://www.maisonhomeinteriors.com/stores.ph p
When I then upload the IDENTICAL file using 5.5 clicking the button does nothing.
To make it easier for you to see the effect I have duplicated the stores.php file so that there is one called stores5.php and one ca
lled stores55.php.
Each one is IDENTICAL no changes have been made. The one entitled stores5.php has been uploaded by version 5 and the one called stor
es55 has been uploaded by version 5.5
I hope you can see the problem!
I have found other problems with other sites too. I simply can't trust version 5.5 !!!!
I hope you can help further!
Out of interest I have sent via FTP two zip files of the prefs screen shots from both versions.
Notes to Customer
Wednesday, December 14, 2011 11:55:11 AM PST
Hello Colin,
Thanks for contacting adobe..!!!
we tried contacting you many times but reached voicemail.
Colin, we want you to follow instructions given below :
>> On your project please try to link <stores.php> page in place
of <stores.html>
>> Try to reset the preferences for both versions of Dreamweaver.
{follow:- http://kb2.adobe.com/cps/839/cpsid_83912.html }
>> Then try to compare preferences of both version on a New Document.(
create a new document, go to : Edit> preferences)
>> If there is any difference please let us know.
If this will not help you resolving your issue, you can call us back.
Nimish
Adobe
Notes from Customer
Tuesday, December 13, 2011 2:35:41 PM PST
I don't understand!!!
Your message says...
"Open - Pending Your Response"
Response to WHAT? you haven't asked me anything. Are you asking me to do something? please be specific as to what you want me to do!
Regards
Notes from Customer
Monday, December 12, 2011 11:49:40 PM PST
Er.. but you haven't said anything!
What are you asking for?
What am I meant to do?

Hi Fastdak25,
Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Performance issues with version enable partitioned tables?

Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
     Object Name     Rows     Bytes     Cost     Object Node     In/Out     PStart     PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE          1          249
UPDATE     SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI          1     266     249
PARTITION RANGE ALL                                   1     9
TABLE ACCESS FULL     SIG.SIG_QUA_IMG_LT     1     259     2               1     9
VIEW     SYS.VW_NSO_1     1     7     247
NESTED LOOPS          1     739     247
NESTED LOOPS          1     677     247
NESTED LOOPS          1     412     246
NESTED LOOPS          1     114     244
INDEX RANGE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62     2
INDEX RANGE SCAN     SIG.QIM_PK     1     52     243
TABLE ACCESS BY GLOBAL INDEX ROWID     SIG.SIG_QUA_IMG_LT     1     298     2               ROWID     ROW L
INDEX RANGE SCAN     SIG.SIG_QUA_IMG_PKI$     1          1
INDEX RANGE SCAN     WMSYS.WM$NEXTVER_TABLE_NV_INDX     1     265     1
INDEX UNIQUE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))

Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben

Can't open version 3 documents with version 5

Hello,
My company didn't upgrade me to version 4 so I'm trying to open my version 3 .cp files with version 5. Every time I try to open one, it crashes.
I'm using a different computer (still Windows XP, though) than I had when I last used the version 3 files and am accessing them on a remote server via VPN.
Any ideas? I've tried restarting my computer when it doesn't open and looking for a version 4 to download so I can try opening it that way, saving it, and then opening it in version 5, but I haven't had any luck so far.
Thanks for your help,
Elaine

Hi Elaine
I see this is your second post here in the forums. So it occurs to me that you may be unaware of one of Captivate's "golden rules" that help keep you out of trouble.
That rule?
always, Always, ALWAYS work with projects ONLY when you have them stored on your local C drive.
never, Ever, NEVER EVER consider opening Captivate, then clicking File > Open and navigating to a network drive and try to make edits while the project is on a network.
Sometimes your IT peeps will help you aim the shotgun squarely at your leg and tell you to pull the trigger. They want you to work with your files on the LAN because their precious servers are backed up and your local hard drives typically aren't. It's perfectly fine to store your projects on the LAN if the only purpose is for backup. So consider copying the projects there at the end of each day to satisfy those backup requirements.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

I'm using a macbook pro with version 10.6.8 installed. whenever i try to install my software updates, it immediately asks me to restart my computer to finish the installation. after doing so and signing back on to my account no updates have been installed

I'm using a macbook pro with version 10.6.8 installed. Whenever I try to install my software updates, it immediately asks me to restart my computer to finish the installation. After doing so and signing back on to my account, nothing has changed and no updates have been installed. It still says the same 8 items need to be installed, and the same process occurs again. Any idea how I can fix this?

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Version 8 sharing with Version 7

Similar Messages

Maybe you are looking for