.. very simple issue.. very urgent.

Hi SDN,
We are finding out Longitude and Latitude for getting some output based on the address of customer..
I see there is use of Trignometric functions here..
I Just want to find out TAN 45 degreese value in ABAP..
When I calculate <b>TAN ( 45 )</b> in ABAP and its giving me some wriong value instead of 1. I think its considering 45 as a number not the degree..
I want to calculate TAN 45 degree value.. How to do that in ABAP..
Point sure..
regards,
nazeer
Message was edited by:
N a z e e r

Hi Nazeer,
The value of Tan(45) is beng wrongly calculated by ABAP because internally the data type for all the Trignometric functions are represented as Floating point numbers.
Please refer to this:
The results of the following functions have the data type f:
     Trigonometric functions: cos, acos, sin, asin, tan, atan
     Hyperbolic functions: tanh, sinh, cosh
     Exponential functions (base e): exp
     Natural logarithms (base e): log
     Logarithms (base 10): log10
     Square root: sqrt
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Similar Messages

Very Urgent: Deleting Batch from STO and Goos Issue reversal Using BAPI

Hi,
I want to delete outbound delivery for particular shipment number and this should be done using BAPI or a FM not using the tcode VL02N.
I wld be very grateful
Please List out the BAPI 's or FM that can be used for to perform these listed , with using Tcodes:
1) REVERSE BILLING DOCUMENT(VF11)
2) GOODS ISSUe REVERSAL (VL09N)
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
Its very urgent..
Thank you in advance....

1) REVERSE BILLING DOCUMENT(VF11)
BAPI_BILLINGDOC_CANCEL
2) GOODS ISSUe REVERSAL (VL09N)
BAPI_GOODSMVT_CANCEL
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
BAPI_SHIPMENT_CHANGE
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
BAPI_PO_CHANGE

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

CATS Issue VERY Urgent..

HI ALL,
BiW PROD is placing CATS data for 2007 in to week 52 2006. Can advise why?
Please advise what would be the error.
Cheers,
Sri

Hi All,
We have a problem for 0CALWEEK in CATS.
FOR 0CALQUARTER
20061 means 1st quarter
20062 means 2ND quarter
20063 means 3RD quarter
20064 means 4TH quarter
FOR 0calweeK:
20061 means 1st WEEK
20062 means 2ND WEEK
20063 means 3RD WEEK
20064 means 4TH WEEK
0CALWEEK is giving problem IN CUBE.
It shows wrongly.
0CALQUARTER      0CAL WEEk
2007 1             2006 52 ( 52 week)
2007 1                          2006 52
<b>0CAL WEEk          should show 2007 1     instead of 2006 52.</b>
It should show :
0CALQUARTER      0CAL WEEk
2007 1             2007 1 (ist week in 2007)
2007 1                         2007 1
we have a routine on 0CAL_week
=====
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
data:   employee_md like /bi0/memployee,
        employee_wa like /bi0/memployee,
        person_md   like /bi0/mperson,
        PERSON_WA   LIKE /BI0/MPERSON.
DATA:   G_RECORD_NO LIKE SY-TABIX.
INCLUDE RS_BCT_HR_UPDATE_RULES_GENERAL.
INCLUDE RS_BCT_HR_PAPA_UPDATE_RULES.
$$ end of global - insert your declaration only before this line   -
FORM compute_characteristics
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING    COMM_STRUCTURE LIKE /BIC/CS0CATS_IS_1
           RECORD_NO LIKE SY-TABIX
           RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/VZCATST-CALWEEK
           RETURNCODE LIKE SY-SUBRC
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal table "MONITOR", to make monitor entries
data: w_date type d.
data: w_date_check type d.
data: w_numberofdays type p decimals 2.
data: w_numberofweeks type i.
data: w_dayofweek type p.
data: w_first_day_of_sap_calendar type d value '19790101'.
data: check type i.
data: w_year(4) type c.
data: w_weekno(2) type c.
w_date_check = COMM_STRUCTURE-CALDAY.
w_date = w_date_check.
w_date+04(04) = '0101'. " beginning of the year
do.
w_dayofweek = ( ( w_date - w_first_day_of_sap_calendar ) mod 7 ) + 1.
if w_dayofweek = 7. " First sunday(7) of the Current year
exit.
endif.
add 01 to w_date+07(01).
enddo.
w_numberofdays = ( w_date_check - w_date ) + 1.
w_numberofweeks = ceil( w_numberofdays / 7 ).
w_year = w_date_check+0(4).
if w_numberofweeks = 53.
    w_numberofweeks = 1.
    w_year = w_date_check+0(4) + 1.
endif.
if w_numberofweeks = 0.
    w_numberofweeks = 52.
    w_year = w_date_check+0(4) - 1.
endif.
w_weekno = w_numberofweeks.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
     exporting
          input   = w_weekno
    importing
         output = w_weekno.
concatenate w_year w_weekno into RESULT.
result value of the routine
RESULT = .
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
========
This is giving problem from 2007 year only.
We need to check with FI or HR teams , Is there any configuration settings in R/3 side for 0Calweek?
This is production ISSUE. Help me on very Urgent BASIS!!
Thanks & Regards,
Sri.

Query Issue(Very Urgent)

Hi,
     I have issue with select statement to pull the records from two tables. Here I have two tables one is with Billing Document Items and Service Order Operations.
I have service order as unique field in both tables, When I execute select statement with one service order I got 10 records like
S Ord Oper                           Billing Document Items
Oper    Repair Code                 Item    Oper    Repair Code
10        AD01                           1         10        AD01
20        AD01                           2         20        AD01
30        OT01                           3         10        AD01
40        RE01                           4         20        AD01
50        RP01                           5         20        AD01
                                               6        20         AD01
                                                7        30         OT01
                                                8        40         RE01
                                                9        50         RP01
                                               10      50         RP01
             This are the records with same Service order number, and my select statement giving data like
O/P
Service Order = 60001212
OPER    ITEM    REPAIR TYPE
10         1           AD01
20         1           AD01
10         2           AD01
20         2           AD01
10         3           AD01
20         3           AD01
10         4           AD01
20         4           AD01
10         5           AD01
20         5           AD01
10         6           AD01
20         6           AD01
30         7           OT01
40         8           RE01
50         9           RP01
50         10         RP01
But I need output like this
Item Oper                   Rep Code
1      10                      AD01
2      20                      AD01
3      10                      AD01
4      20                      AD01
5      20                      AD01
6      20                      AD01
7      30                      AD01
8      40                      RE01
9      50                      RP01
10    50                      RP01
         Please give me the select statement which gives the above output. I need very urgent please....
Thanks
Robbie

hi robert,
The ouput u want is just a little away from the one u r actually getting. it is the two fields OPER and ITEM interchangeably..
U just have to use GROUP BY ITEM..........if u want the desired output with ITEM as first field.
<group-by-clause> → GROUP BY [<column-ref>,*]<column-ref>
if it helps please reward points.
thanks

Attachment issue --very urgent help required

Hello friends,
1)i have create page and deatal page . requirement is that we have to load required attachments in table region, if not loading required attachments exception will raise. this validation is working fine in create page.
2)same in detail page i loaded required attachments also excepiton is raising.
waht would be cause. i am very new to ADF technology.
very urgent to fix this issue. any one help me out.
Thanks,
vamshi.
Edited by: Krishna Vamshi on Jul 1, 2010 6:14 PM

Kirshna,
Unfortunately your question is very unclear.
Let me say that if you are asking about OA Framework, you should ask on the OA Framework forum, not here.
also excepiton is raising.It will help if you say what the exception is.
John

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Simple BOM with sub-items (very very urgent)--1 item & 2 subitem

Hi all,
i am creating a BOM with sub-items using 'BAPI_MATERIAL_BOM_GROUP_CREATE'. while creating sub-item, it is taking only one subitem. but i am giving multiple sub-items per item.
i am giving a program where i am assigning 2 subitems to one item.
after tha bapi call, 1 subitem is creating.
i have tried so many times by clearing the work area & calling the bapi for each sub-item.but it is creating only one sub-item only.
i am giving an example of my report.plz correct it if i am wrong.it is veryt very urgent.
any idea will be highly appreaciated.
Regards
pabitra
REPORT ZTEST_CHIN message-id 01.
This code will create a material BoM for the material
MAINMATERIAL with the components COMPON1 and COMPON2.
Data Declaration
DATA:
    it_bomgroup LIKE bapi1080_bgr_c OCCURS 0 WITH HEADER LINE,
    it_variants LIKE bapi1080_bom_c OCCURS 0 WITH HEADER LINE,
    it_items LIKE bapi1080_itm_c OCCURS 0 WITH HEADER LINE,
    it_matrel LIKE bapi1080_mbm_c OCCURS 0 WITH HEADER LINE,
    it_itemas LIKE bapi1080_rel_itm_bom_c OCCURS 0 WITH HEADER LINE,
    it_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE,
    it_subitems LIKE bapi1080_sui_c OCCURS 0 WITH HEADER LINE,
    it_subitemas LIKE BAPI1080_REL_SUI_ITM_C OCCURS 0 WITH HEADER LINE.
Fill the data
Material BoM Group Header Data
CLEAR it_bomgroup.
it_bomgroup-bom_group_identification = 'BAPI_SMP_COL1'.
it_bomgroup-object_type = 'BGR'.
it_bomgroup-object_id = 'SIMPLE1'.
it_bomgroup-bom_usage = '1'. " YOU COULD CHANGE THE BOM USAGE TO YOUR
it_bomgroup-ltxt_lang = sy-langu.
it_bomgroup-technical_type = ' '.
it_bomgroup-bom_text = 'Simple BoM - FM'.
APPEND it_bomgroup.
Header Details of the different variants
CLEAR it_variants.
it_variants-bom_group_identification = 'BAPI_SMP_COL1'.
it_variants-object_type = 'BOM'.
it_variants-object_id = 'SIMPLE1'.
it_variants-alternative_bom = '01'.
it_variants-bom_status = '01'.
it_variants-base_qty = '1.000'.
it_variants-valid_from_date = sy-datum.
it_variants-function = 'NEW'.
APPEND it_variants.
Details of the materials of the different variants
CLEAR it_matrel.
it_matrel-bom_group_identification = 'BAPI_SMP_COL1'.
it_matrel-material = 'BAPIBOMFG1'.
it_matrel-bom_usage = '1'.
it_matrel-alternative_bom = '01'.
APPEND it_matrel.
Linking subitems to the corresponding variants
CLEAR it_subitemas.
it_subitemas-bom_group_identification = 'BAPI_SMP_COL1'.
it_subitemas-sub_object_type = 'SUI'.
it_subitemas-sub_object_id = 'SIM1'.
it_subitemas-super_object_type = 'ITM'.
it_subitemas-super_object_id = 'SIMPLE1'.
APPEND it_subitemas.
Linking items to the corresponding variants
CLEAR it_itemas.
it_itemas-bom_group_identification = 'BAPI_SMP_COL1'.
it_itemas-sub_object_type = 'ITM'.
it_itemas-sub_object_id = 'SIMPLE1'.
it_itemas-super_object_type = 'BOM'.
it_itemas-super_object_id = 'SIMPLE1'.
it_itemas-valid_from_date = sy-datum.
it_itemas-function = 'NEW'.
APPEND it_itemas.
Details of the items of the variants
CLEAR it_items.
it_items-bom_group_identification = 'BAPI_SMP_COL1'.
it_items-object_type = 'ITM'.
it_items-object_id = 'SIMPLE1'.
it_items-item_no = '0010'.
it_items-item_cat = 'L'.
it_items-component = 'BAPIBOMRW1'.
it_items-comp_qty = '2'.
it_items-valid_from_date = sy-datum.
APPEND it_items.
CLEAR it_subitems.
it_subitems-bom_group_identification = 'BAPI_SMP_COL1'.
it_subitems-object_type = 'SUI'.
it_subitems-object_id = 'SIM1'.
it_subitems-subitem_no = '0001'.
it_subitems-INSTALLATION_POINT = 'ab1'.
it_subitems-subitem_qty = '1'.
APPEND it_subitems.
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
    all_error         = 'X'
TABLES
    bomgroup          = it_bomgroup
    variants          = it_variants
    items             = it_items
    materialrelations = it_matrel
    itemassignments   = it_itemas
    subitems          = it_subitems
    subitemassignments = it_subitemas
    return            = it_return.
CLEAR it_subitems.
it_subitems-bom_group_identification = 'BAPI_SMP_COL1'.
it_subitems-object_type = 'SUI'.
it_subitems-object_id = 'SIM1'.
it_subitems-subitem_no = '0002'.
it_subitems-INSTALLATION_POINT = 'ab2'.
it_subitems-subitem_qty = '1'.
APPEND it_subitems.
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
    all_error         = 'X'
TABLES
    bomgroup          = it_bomgroup
    variants          = it_variants
    items             = it_items
    materialrelations = it_matrel
    itemassignments   = it_itemas
    subitems          = it_subitems
    subitemassignments = it_subitemas
    return            = it_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
LOOP AT it_return.
WRITE:/ it_return-type, it_return-id, it_return-number,
          it_return-message.
ENDLOOP.

Hi rich,
Thanks. i will do the same.can u plz suggest me , where i am doing mistake in my coding to create sub-items in a BOM?
Thanks & Regards
pabi

Very urgent Decimal issue in ADF page

Hello friends,
i have an issue in ADF page which was weight field, issue has below.
1) weight filed was validated that without entering 5 digit value in filed, example suppose i enter 12345 in weight it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but it is let me to go next field and submit button. it is happening only in create page only.
2)but when i go to detail page , same weight fild is populated there - i enter invalid weight something 12345, it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but here let me not go to another filed until i ENTER valid value.
create page weight filed need to work same as detail page.i am new to ADF development, how to check where this validation done and how to fix this.
very very urgent.
Thanks,
vamshi.

If you use ADF BC, open the entity and choose "Business Rules". You can then add validation rules such as range limits under the attributes. It is usually best practice to include validation rules in the entity (model layer), this way they apply automatically to all view objects based on the entity and you are guaranteed to have only valid values in the database. (View layer validation may have its place as a convenience supplement.)
Read more about business rules in the developer's guide: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcvalidation.htm

Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.

Hi all ,
Very Urgent, Please Help me on this issue.
when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
Selvam

Is your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.

Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Thanks
SAP BW

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

How to write code for this logic in a routine, very urgent --help me

hi all,
i want to apply this logic into one subroutin ZABC.
here i m giving my logic ,can any body help me in coding for this, this is very urgent, i hv to submit on wednesday.
4.1 Read the company code number BSEG-BUKRS from document line item.
4.2 Fetch PRDHA from MARA into GV_PRDHA where MATNR = BSEG-MATNR.
4.3 Fetch Business area (GSBER) from ZFIBU into GV_GSBER where (PRDHA = GV_PRDHA and BUKRS = BSEG-BUKRS) OR (PRDHA = GV_PRDHA and BUKRS = SPACE).
4.4 If business area match is found, go to step 3.9. Else continue.
4.5 If BKPF-BLART IN set ZVS_POSDT OR BKPF-XBLNR starts with I0*, execute steps below. Else, go to Step 3.6.
i. MOVE: BSEG-BKURS TO work area field WA_ZFIBUE-BUKRS,
BSEG-MATNR TO work area field WA_ZFIBUE-MATNR,
GV_PRDHA TO work area field WA_ZFIBUE-PRDHA,
BSEG-HKONT TO work area field WA_ZFIBUE-HKONT,
BSEG-GSBER TO work area field WA_ZFIBUE-GSBER,
BSEG-PSWBT TO work area field WA_ZFIBUE-PSWBT,
BKPF-BUDAT TO work area field WA_ZFIBUE-BUDAT,
SY-DATUM TO work area field WA_ZFIBUE-CREDATE,
SY-UZEIT TO work area field WA_ZFIBUE-CRETIME,
Fetch running serial number (WA_ZFIBUE-SERIALNO) from ZFICO. This number will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "ZFIBUE" and KEY1 = "SERIALNO". The actual serial number will be stored in the field VALUE1.
i. Insert WA_ZFIBUE INTO ZFIBUE.
ii. Send email notification to the user (if it is not already sent to user on the same posting date).
Use function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
Fetch email address and date of last email from ZFICO. These values will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "EMAIL" and KEY1 = "<USERNAME>". The email address will be stored in the field VALUE1 and posting date in VALUE2. Once mail is sent, VALUE2 is updated with latest posting date (BKPF-BUDAT).
iii. Increment the running serial number and update ZFICO with new serial number.
a. GV_ SERIALNO = WA_ZFIBUE-SERIALNO + 1
b. Update ZFICO Set value1 = GV_SERIALNO
Where PARAMTYPE = "BPM030307" AND
SUBTYPE = "ZFIBUE" AND
KEY1 = "SERIALNO".
iv Move VDFT to BSEG-GSBER.
v. Exit routine.
4.6 Fetch MTART into GV_MTART from MARA where MATNR = BSEG-MATNR.
4.7 If SY-BATCH = INITIAL AND GV_MTART <> ROH, issue the error message - Maintain the mapping of product hierarchy <PRDHA> from article <MATNR> for <BUKRS>. Else, go to step 3.8.
4.8 If SY-BATCH <> INITIAL AND GV_MTART <> ROH, issue the error message - Maintain product hierarchy on article master. Go to step 3.10.
4.9 Move GV_GSBER TO BSEG-GSBER.
4.10 Exit Routine
plz give me reply asap --this is very urgent
thanks in advance
swathi

Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

Update Routine ... Help me Please--VERY URGENT

Hi All ,
I Moving data from Cube to ODS . Let me explain abt the records in the cube .
There are 6 key figures in the cube as well as dimensions, UNIQKEY TRANSACTION is One Dimension and ARTICLE is another dimension which is having an Navigational attribute called CORE ELEMENT.
I am showing the data with those two dimension and the key figures which are to be used in the routine.
Charc----
Key Figures
UNIQKEY-ARTICLE-Coreelement--
billqty
in base unit
A00N----1006330--1--
10.5
A00M -
1006320----2--
2.5
A00P-----1006330--1--
10.5
A00P-----1006320--2--
2.5
A00Q-----1006320--2--
2.5
A00Q-----1006340--3--
10.5
Now Lets see what the core element numbers mean,
core element 1 means -- fuel .
Core elemnet other 1 -- food .
I need to move these data into ODS Which will have an extra field called No of items in the transaction --ITEMS.For this i need to write a routine .
The Logic is ...
1.if Materail is of type 1(Means if the core element - 1)
I need to Populate the No of items in tnx = 1 .--ITEMS.
2.If Material is of type(Means if the core element)2or 3 I need to populate the billing quantity to the no of transcations.--ITEMS
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1 (replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the Transcation= 3
So the ODS Data should look like this.
UNIQKEY--billqty--
ITEMS
in base unit
A00N--10.5--
1
A00M--2.5--
2.5
A00P--13--
3.5
A00Q--13--
12.5
NOTE : IN the ODS only the UNIQKEY IS THE KEY FIELD and the rest are DATA FIELDS.
I Posted this one before also. But didnt get proper responses.
I am Pasting the piece of code which I have written . This code will work for the first two records in the cube , But it is failing for the UNIQKEY Transcation having Line items.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
       CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line   -
FORM compute_data_field
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING    COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
           RECORD_NO LIKE SY-TABIX
           RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
           RETURNCODE LIKE SY-SUBRC "Do not use!
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
        INTO CORE_ELEMENT
        from /BI0/PMATERIAL
        where
        material = COMM_STRUCTURE-material
        and OBJVERS <>'D'.
   IF CORE_ELEMENT EQ '1'.
   TITEMS = '1'.
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
         input         = titems
      IMPORTING
        OUTPUT        = titems
   ELSE.
   TITEMS = COMM_STRUCTURE-BILL_QTY.
   ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
PLease give me ideas on how to acheive this . As I am not Aware of ABAP very well.. PLease try to give me the code. I hope one of you may got the same requirement before.
Its very urgent and I need to deliver it today itself.
Thanks in advance , you can mail me to [email protected]. If anybody intersted to discuss this Issue they can reach at +91 9845922955.

Hi ,
While I am moving the data from cube to ods . I need to create the update rules with cube -- 8cube . WHen i am doing this the billqty is a key figure in cube so that is not a problem but the ITEMS is not there in the cube ,SO for that I need to write a routine to populate that one.
Its strange but the user what to analyse with the UNIQKEY transaction. And these objects will be added as navigational attributes to the Characteristic. as it acts as another dimension.
He wants to laod these from ODS to Master data -Characteristic.
to say for each transcation hpw many items are getting sold.
Message was edited by: Nagarjuna Reddy
ONce again thanks for the qucik replies
Message was edited by: Nagarjuna Reddy

CAN ANY BODY EXPLAIN THESE QUESTIONS, VERY URGENT

WHAT IS THE USE OF CHAPTER ID, IN CHAPTER ID RATES WILL BE DETERMINES.
HOW MANY TAX CODES NEED CST, LST.
WHERE CAN I SEE EXCISE REGISTER
WHAT IS MEANT BY RG1 CAN ANY BODY EXPLAIN BRIEFLY, WHAT IS THE USE OF RG1
HOW DO I GET OPENING BALANCE FOR EVERY MONTH.
IN DEPOT SALES, IF CREATING EXCISE INVOICE A CERTIFICATED WILL ISSUE, IN A CERTIFICATE WHICH FIELDS WILL BE THERE.
WHAT IS MEANT BY JURISDICTION CODE & COUNTY CODE.
IN SD FACTORY SALES WHICH A/C ENTERIES GENERATED.
CAN ANY BODY EXPLAIN THESE FORMS, WHICH SITUATION THESE FORMS WE ARE USING. I NEED VERY URGENT.
a) A form
b) D form
c) C form
d) H form
e) DDP form
f) TR6 form
g) D3 form.
H) ARE.
I) ARE 1
j) ARE 2
IN DEPOT SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME,
IN FACTORY SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME
NOW WHAT IS THE VAT TAX.
what is the use of common distribution channel and common divisions
PLS FORWARD ANSWERS TO THIS MAIL ID.
i hope that definitely people will help
thanks every body.

Dear vara prasad
You can take it for granted if you post so much questions in one thread like this, nobody will answer / clarify you.
So please make one thread per question.
Meanwhile, just I would like to clarify for few questions
1) The most important feature of chapter id is that based on this chapter id which you maintain in "Excise Tax Rate", all your excise tax rates will be flowing into your sale order / billing
2) If the rate of tax differs, then you need to maintain a separate tax code. For example, the LST / VAT in some state is 4%, and in some state it is 12%. So in this case, you need to maintain two tax codes
thanks
G. Lakshmipathi

Plz help me TEXTPOOL PROBLEM(VERY URGENT)

hi experts,
plz help in resolving this issue this is very urgent.
error is
The line type of "RPOOL" must be compatible with one of the types
"TEXTPOOL".
and its coming in :
FORM GET_SELSCREEN_TITLE TABLES P_SCREENS STRUCTURE DYNNR.
DATA: BEGIN OF RPOOL OCCURS 20,
ID(1),
NAME(8),
TEXT(80),
END OF RPOOL.
READ TEXTPOOL RSVAR-REPORT LANGUAGE SY-LANGU INTO RPOOL.
plz help me.

Hi !
Try this :
DATA RPOOL LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
Reward if usefull,
Regards,
Stéphane.

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

.. very simple issue.. very urgent.

Similar Messages

Maybe you are looking for