Very urgent - java frame ticker in the taskbar

hi all ,
i want a typical feature.i am using UI frame(window) for my application.when i put a task in the UI running and minimize in the taskbar.the window should glow(ticker like real player)indicating that some task is running in the window and it is active.it is helpful if u give general that when i minimize the window that should glow(ticker)indicating that it is active in the taskbar.
regards
harinath

There was a post about this is very long time agop. My idea was to change the setTitle function.
In the task bar, the button takes the frame's title as label, So, if you change the title, it will be displaying in the tackbar icon. Simply override the setTitle() method and provide if a Thread to change the appearance of the title. Thi is like a loop changing the title displayed.
"this task is running"
"his task is running"
"is task is running"
"s task is running"
" task is running"
hope this helps
vincent

Similar Messages

Very urgent please ----repetting values in the output

I am getting values for acc seq   access seq number and codndition table repeting values as in the output of the report, please have a look in my code and please do respond immediatley.
regards always, below is my code and output
REPORT zmaster_condition LINE-COUNT 80 LINE-SIZE 225.
     D A T A                                                         *
INCLUDE zmaster_condition_top.
    S E L E C T I O N S                                              *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-b01.
SELECT-OPTIONS: s_kvewe FOR t683s-kvewe,
                s_kappl FOR t683s-kappl,
                s_kalsm FOR t683s-kalsm,
                s_kschl FOR   t683s-kschl,
                s_kabnr FOR t682i-kotabnr,
                s_kozgf FOR t682i-kozgf.
SELECTION-SCREEN END OF BLOCK b01.
*SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-s04.
*PARAMETERS:      p_vari     LIKE   disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b4.
**SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
*SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
PARAMETERS R1 RADIOBUTTON GROUP RADI1 DEFAULT 'X'.
*SELECTION-SCREEN END OF BLOCK b02.
     A T   S E L E C T I O N - S C R E E N                           *
     M A I N   P R O G R A M                                         *
START-OF-SELECTION.
*Initializing the local tables.
CLEAR:it_t682i,it_t683s,it_t685.
REFRESH:it_t682i,it_t683s,it_t685.
clear it_output_report.
refresh it_output_report.
*Selection of data from pricing procedure tables
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
            INTO TABLE it_t682i
            WHERE kvewe = 'B'
            AND kappl = 'V1'.
SELECT kvewe kappl kalsm stunr zaehk kschl FROM t683s
       INTO   TABLE it_t683s
       WHERE kvewe = 'B'
       AND    kappl = 'V1'
       and    kschl in s_kschl
       AND    kalsm IN s_kalsm.
sort it_t683s by kvewe kappl.
DELETE   adjacent duplicates FROM
         it_t683s .
SELECT kvewe kappl kschl kozgf FROM t685
    INTO TABLE it_t685
    WHERE kvewe = 'B'
    AND kappl = 'V1'
    AND kschl IN s_kschl
    AND kozgf IN s_kozgf.
LOOP AT it_t683s.
    it_output_report-kvewe = it_t683s-kvewe.
    it_output_report-kappl = it_t683s-kappl.
    it_output_report-kalsm = it_t683s-kalsm.
    it_output_report-stunr = it_t683s-stunr.
    it_output_report-zaehk = it_t683s-zaehk.
    it_output_report-kschl = it_t683s-kschl.
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
             INTO TABLE it_t682i
             WHERE kvewe = it_t683s-kvewe
             AND kappl = it_t683s-kappl
             and kozgf   in s_kozgf
             and kotabnr in s_kabnr.
             clear it_t682i.
loop at it_t682i.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kolnr = it_t682i-kolnr.
it_output_report-kotabnr = it_t682i-kotabnr.
   APPEND it_output_report.
   CLEAR it_output_report.
endloop.
APPEND it_output_report.
ENDLOOP.
        E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Output to a list
FORMAT COLOR 2 .
WRITE:/2 'Usage',09 'App',17 'Proced',24 'Step',
            37 'Counter',50 'CondType',63 'Description',85 'AccSeq',
           97 'AccSeqNum',108 'ConTable'.
WRITE:/1(225) sy-uline.
LOOP AT it_output_report.
    WRITE:/ it_output_report-kvewe UNDER 'Usage',
            it_output_report-kappl UNDER 'App',
            it_output_report-kalsm UNDER 'Procedure',
            it_output_report-stunr UNDER 'Step',
            it_output_report-zaehk UNDER 'Counter',
            it_output_report-kschl UNDER 'CondType',
           it_output_report- UNDER 'Description',
            it_output_report-kozgf UNDER 'AccSeq',
            it_output_report-kolnr UNDER 'AccSeqNum',
            it_output_report-kotabnr UNDER 'ConTable'.
            it_output_report- UNDER 'SalesOrg',
            it_output_report- UNDER 'DocType'.
            it_output_report- UNDER 'Customer'.
ENDLOOP.
output of the report:
Usage App     Proced   Step   Counter CondType   AccSeq AccqNum ConTable
B      V1        V10000      220   00           ZCR1        Z200         05           511
B      V1 V10000      220          01           ZRAS        Z200        05         511
B      V1 V10000      225          00           ZTPT         Z200        05         511
B      V1 V10000      230          00           ZOP4         Z200        05         511
B      V1 V10001      010          01           RD03         Z200        05         511
B      V1 V10002      010          00           ZREP         Z200        05         511
B      V1 V10000      200          00           ZOP3          z200        05         511
B      V1 V10000      130          00           ZOC3           z200        05         511

i would like to thanks you for your valuable help.
i am still getting repeated values for access seq , access number and cond table,last three columns in the output, pls see as it it is very urgent...
here is the code:
REPORT zmaster_condition LINE-COUNT 80 LINE-SIZE 225.
     D A T A                                                         *
INCLUDE zmaster_condition_top.
    S E L E C T I O N S                                              *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-b01.
SELECT-OPTIONS: s_kvewe FOR t683s-kvewe,
                s_kappl FOR t683s-kappl,
                s_kalsm FOR t683s-kalsm,
                s_kschl FOR   t683s-kschl,
                s_kabnr FOR t682i-kotabnr.
               s_kozgf FOR t682i-kozgf.
SELECTION-SCREEN END OF BLOCK b01.
*SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-s04.
*PARAMETERS:      p_vari     LIKE   disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b4.
**SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
*SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
PARAMETERS R1 RADIOBUTTON GROUP RADI1 DEFAULT 'X'.
*SELECTION-SCREEN END OF BLOCK b02.
     A T   S E L E C T I O N - S C R E E N                           *
     M A I N   P R O G R A M                                         *
START-OF-SELECTION.
*Initializing the local tables.
CLEAR:it_t682i,it_t683s,it_t685.
REFRESH:it_t682i,it_t683s,it_t685.
REFRESH it_output_report.
SELECT kvewe kappl kalsm stunr zaehk kschl FROM t683s
       INTO   TABLE it_t683s
       WHERE kvewe IN s_kvewe
       AND    kappl IN s_kappl
       AND    kalsm IN s_kalsm
        AND    kschl IN s_kschl.
*delete adjacent duplicates from it_t683s comparing
                                kvewe kappl kschl.
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
                 INTO TABLE it_t682i
                FOR ALL ENTRIES IN it_t683s
                 WHERE kvewe = it_t683s-kvewe
                 AND kappl = it_t683s-kappl
                AND kozgf   IN s_kozgf
                 AND kotabnr IN s_kabnr.
LOOP AT it_t683s.
   it_output_report-kvewe = it_t683s-kvewe.
   it_output_report-kappl = it_t683s-kappl.
   it_output_report-kalsm = it_t683s-kalsm.
   it_output_report-stunr = it_t683s-stunr.
   it_output_report-zaehk = it_t683s-zaehk.
   it_output_report-kschl = it_t683s-kschl.
move-corresponding it_t683s to it_output_report.
sort it_t683s.
sort it_t682i.
READ TABLE it_T682i with KEY KVEWE = it_T683s-KVEWE
                            kappl = it_t683s-kappl.
LOOP AT it_T682i WHERE KVEWE = it_T683s-KVEWE
                       AND kappl = it_t683s-kappl.
                      AND kotabnr IN s_kabnr.
IF SY-SUBRC EQ 0.
   move-corresponding it_T682i to it_output_report.
     it_output_report-kozgf = it_t682i-kozgf.
     it_output_report-kolnr = it_t682i-kolnr.
     it_output_report-kotabnr = it_t682i-kotabnr.
ENDIF.
APPEND it_output_report.
ENDLOOP.
*DATA TAB(4).
*DATA VKORG LIKE TAB-VKORG.
*CONCATENATE it_t683s-kvewe it_t682i-kotabnr INTO TAB .
*SELECT SINGLE VKORG INTO VKORG FROM TAB WHERE
KSCHL = 'ZRC1'.
        E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Output to a list
FORMAT COLOR 2 .
WRITE:/2 'Usage',09 'App',15 'Proced',24 'Step',
            37 'Counter',50 'CondType',63 'Description',85 'AccSeq',
           97 'AccSeqNum',108 'ConTable'.
WRITE:/1(225) sy-uline.
LOOP AT it_output_report.
    WRITE:/ it_output_report-kvewe UNDER 'Usage',
            it_output_report-kappl UNDER 'App',
            it_output_report-kalsm UNDER 'Proced',
            it_output_report-stunr UNDER 'Step',
            it_output_report-zaehk UNDER 'Counter',
            it_output_report-kschl UNDER 'CondType',
           it_output_report- UNDER 'Description',
            it_output_report-kozgf UNDER 'AccSeq',
            it_output_report-kolnr UNDER 'AccSeqNum',
            it_output_report-kotabnr UNDER 'ConTable'.
            it_output_report- UNDER 'SalesOrg',
            it_output_report- UNDER 'DocType'.
            it_output_report- UNDER 'Customer'.
here is the output:
Report to list out all Condition Records for Output and Pricing.
Usage App   Proced   Step Counter CondType AccSeq AccSeqNum ConTable
                                                                                B      V1     V05000   010        01      AF00             Z001        05         551
B      V1    V05000   020          02      MAIL           Z001        05         551
B      V1    V05000   030          01      ESYM         Z001        05         551
B      V1    V06000   010          01      AN00          Z001        05         551
B      V1    V06000   020          02       MAIL          Z001        05         551

Java Email notification in the taskbar

Hi,
I am a newbie to Java web start.
In my task, I have to create a java application for email notification (similar to the yahoo messenger email alerts) on the task bar when the new mail arrives and on clicking the icon it should take to appropriate mailbox.
On googling over some of the topics, I came to know the java web start can provide the facility to meet my requirement but I have no clue on where to start with.
It would be of great help if any of you can provide me a heads up on where to start with or examples or documents or some good ideas.
Thanks,
Hari

Just some sanity check. Are sending the email before or after raising the exception in the BAdI?

Help neede very very urgently ... to clear the report from Cache.....

Hello all,,,
In my project iam using crystsal report for eclipse to generate reports.
Iam using a .jsp page to call my report.(which i got it from the examples of CRE).
The name of my jsp page is poi.jsp
The name of my Crystal report is CrystalReport2.rpt
My problem is this....
when i run the report first time i can see my poi.jsp page and user can submit
the parameter and based on the users parameter the report is generated..(ITs working absoultely fine)
but when the user runs the report again, its not showing the parameter page (i.e user cannot see poi.jsp)
rather its showing the old generated report.
When i tried using session.invalidate and session.removeAttribute it was showing me the poi.jsp page
but the problem is when the user clicks on the print icon or any icon on the report its just
showing the poi.jsp page...
When the user closes the report or when the clicks on the button to generate the report it should
show the parameter page (poi.jsp).how can i solve this problem???
the code what iam using is as follows..( got it from the examples of CRE - database login )
Object reportSource = session.getAttribute("reportSource");
if (reportSource == null)
String report = "CrystalReport2.rpt";
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, 0);
reportSource = reportClientDoc.getReportSource();
session.setAttribute("reportSource", reportSource);
ConnectionInfos connInfos = new ConnectionInfos();
IConnectionInfo connInfo1 = new ConnectionInfo();
connInfo1.setUserName("USER");
connInfo1.setPassword("USER");
connInfos.add(connInfo1);
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
viewer.setEnableLogonPrompt(false);
viewer.setDatabaseLogonInfos(connInfos);
if (session.getAttribute("refreshed") == null)
viewer.refresh();
session.setAttribute("refreshed", "true");
viewer.setOwnPage(true);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
//session.removeAttribute("refreshed");
//session.invalidate();
thanks in advance
regards
jack

As far as parameter refresh is concerned add in your code
viewer.setHasRefreshButton(true)
refresh button is appeared on crystal report toolbar and you can use this button instead of explorer refrsh button and every time you can add new parameters values.
Also, if you want to update reportsource in session object. means if user wants to view more than one different reports and want to invalidate reportsource form session.
add in jsp.
session.removeAttribute("reportSource");
Happy programming
Uzma

Very urgent!! Problems with the H.263 codec on JMStudio

I downloaded the JMF Version 2.1.1e ' version.
The H.263 codec doesn't work.
I noticed that the file sound.jar wasn't in the lib directory of JMF-2.1.1e.
Is for this reason I have problems with the H.263 codec??
Thanks for your help.

What do you try to broadcast? H263 is a video codec, not audio..

Very Urgent... to Restrict the entry of fields...

Im using Adobe Professional Live cycle designer 7.0 to design pdf form. Also, Im using an existing pdf (supplied by the customer), which is designed through teleform designer (with adobe 6.0) model for this design. In the existing one, the javascript methods are working fine for restricting keys, validation, etc. But these scripts are not working in designer as the designer is using XFA model.
Im trying to restrict the key inputs (like only numbers/characters should be entered). But I couldnt find the equivalent statements for some of the statements (which are used in the teleform pdf).
For eg.
event.rc = true. Allows keystroke to be added to entry. event.rc = false. Prevents keystroke being added to entry in the following function:
function TFTemplate_KeyStroke( mask )
if (event.willCommit) {
return;
var value = AFMergeChange( event );
if (!mask.test( value )) {
event.rc = false;
app.beep( 0 );
But I couldnt find the matching statements in Designer for event.willCommit, AFMergeChange(),event.rc, etc.
If I get, I can restrict the inputs.
Expecting any solutions from you...
Thanks in Advance...

Hi Vam,
For this you need to take the help of an ABAPer . Ask him to modify the user exit and add the logic.
For user exit please go through the below link it will help you to resolve your issue.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Krishna O
Edited by: Krishna O on Jun 3, 2010 12:29 PM

How to use a DropDownList in Java Swing.Its very very Urgent

Hi Sir,
Here i need to know how to do (or) create a dropdownlist by using Java Swing.I know that there is JMenuBar & JMenuItems without using that when i click a JButton for example the dropdownlist should come from the top to bottom.I have already posted this quesion once.And i found that it has been removed.So i hope that this time i will get a better answer.Pls.do provide the code as well sir.So that i will be very thankful to u.Since i am involved in a project which contains this
feature.It is very very Urgent.So pls.do provide the code i will be waiting for the reply.
Thanx,
m.ananthu

use JComboBox
JComboBox liste = new JComboBox(new Object[]{"azerty","qwerty});the api documentation :
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JComboBox.html
the turotial on combobox :
http://java.sun.com/docs/books/tutorial/uiswing/components/combobox.html

Urgent!Java Frame Cutting according to non-rectangular image (Transparency

Urgent-Java Frame Cutting according to non-rectangular image (CrossPlatform - Transparency)
hi, i want to make the frame transparent in order to make a skin like Windows Media Player . skin is non-rectangular how should i make the frame transparent i am using the JWindow as the container. Plz guide me any idea. as an example i have a JWindow i put a non-rectangular image on it via Jlabel . now i want to make the edges of JWindow outside the boundery of the image transparent ... so that my frame seems like a non-rectanguar image . How i do that? But i need a cross platform kinna thing in java especially for windows/mac/linux
PaulFMendler :: thanks for ur help i looked at the code but it seems to be windows dependent. i need cross-platform way of producing abt effects. please contact me even on my email >> [email protected]
Waiting ......

Check out the link shown below:
http://forum.java.sun.com/thread.jsp?forum=4&thread=391403
The posted code has slight problem when moving the JWindow around but you can get a pretty good idea on what has to be done.
;o)
V.V.

To insert the xml data's generated dynamically it to orac very very urgent

I AM WORKING IN A PROJECT WHICH RECEIVES THE DATA FROM FLAT FILES
AND CONVERT IT TO XML FILE>
I am in need to convert the xml file generated dynamically through out the year map it to correct datafield it the database and insert it in to oracle data base using java and jsp, servlets.
i also need mechanism to be explained detailed and some sample codeings
of converting the data from database to xml because
and i also need to convert the data taken from sql server7.0 put it in xml file and once again read parse and insert in to oracle database.
some sample codeings of the mechanisma and explaninations.
I am in very very urgent-

Hello sir,
Thanks for the guidence.
I need to insert data's into database columns where i should fetch data from xml file.
please
urgent.

Very URGENT -- How to make keyboard print

This is very urgent. How to make the keyboard print?

Here is the code. It is supposed to make the keyboard type something.
This is URGENT.
public class KeyBoarder
     private int keyPressed;
     public KeyBoarder()
          System.out.println("Welcome to keyboard");
     private void print()
          System.out.println("Keyboarder has printed");
     public static void main(String args[])
          KeyBoarder board = new KeyBoarder();
          board.print();

Run Java Appliction in the TaskBar

i want to run my appliction just like as clock running in the task bar at Right left corner. When ever user want to show it only doubly click on icno of application and the he shows the main application frame.
Application's icon show in the task bar and run as a hidden mode in the taskbar. Please give me help this is very new and interesting topic or task for me and my seniors, please give me suggestion what i can do.
Thanks in advance.

You may try this:
http://www.java-tips.org/content/view/115/29/

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!

That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav          8.0.14
org.virtualbox.kext.VBoxNetAdp          4.2.16
org.virtualbox.kext.VBoxNetFlt          4.2.16
org.virtualbox.kext.VBoxUSB          4.2.16
org.virtualbox.kext.VBoxDrv          4.2.16
com.logmein.driver.LogMeInSoundDriver          1.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics          7.3.2
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB          7.3.2
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.kext.triggers          1.0
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Urgent: Gif animation shows only the last frame when reloaded

I use ImageIcon to show gif animations on screen. I want to use only non-looping gif animation files.
Always when I show a gif animation for the first time it runs correctly through all the frames.
However when reloading later the same gif animation only the last frame appears. I want to see all the frames of the animation, not only the last frame.
So for the first showing of the animation this works well:
     icon = new ImageIcon("first_animation.gif");
       label = new JLabel();
       label.setIcon(icon);Then I show another animation and also it works well:
       icon2 = new ImageIcon("second_animation.gif");
       label.setIcon(icon2);Now I would like to show the first animation again but only the last frame of that first animation appears on screen:
label.setIcon(icon);And even this alternative way to refresh does not work:
       icon = new ImageIcon("first_animation.gif");
       label.setIcon(icon);
How can I reload the first animation again so that it shows all the frames not only the last frame???
I have tried for ex. commands updateUI(); and setImageObserver but they don't seem to help.
I am only a novice so...
Please I would really appreciate your detailed advice what lines I should rewrite in my code and how?
Thank you very much!!

By flagging your question "urgent", you are implying that either your question is more important than other people's questions, or your time is more valuable than mine (or someone else's answering questions here). Both are not true.

[b]Strange Java.rmi.ServerError[/b] (very Urgent)

I have a rmi application runninfg on one server (called 1), and web application accessing that application (running on JRUN 3.0) from onother server (called 2).
[ I am newly setting up this structure on another servers (fallback server).
Its working file in the existing servers (live server) ]
There is a perticular methode in a class for which i get the java.rmi.servererror nosuchmethodefound error. If i try any other methode it works fine. the erro only comes for that perticular methode.
I have check the class files (interface, implementation etc.) the methode is perfect and working on the other server.
There is no flow found in any code on any server (1 or 2).the code is perferct.
I can not fild the flaw so please help me its very urgent and criticle.
please help me on this

will the out of date interface or stub process other methodes and gives problem to perticular methode.
all other methodes in the class works fine its only that perticular methode gives me the problem.
I actualy recomplied every file and still the error is still there

Very urgent - java frame ticker in the taskbar

Similar Messages

Maybe you are looking for