VG 224 and FAX

Hello There,
I configured a VG 224 with CallManager 4.2. Gateway itself and all ports are registered with CallManager, but when sending or receiving a Fax, it looks like it can not negotiage with Fax Machine and the output is not readable. Could you please advise what can I do to resolve this issue.
Thanks,
BT

Bahman,
Looking through your configs, you have the following commands in VG224.
mgcp modem passthrough voip mode nse
mgcp fax t38 inhibit
the first command enables fax passthrough for mgcp,
second command disable t38. So your vg224 is configured for Fax passthrough and not t38 fax relay.
You can leave the configs like this on the vg224 and match up the config on the cisco router that is your PSTN gateway. We need to enable the following commands on the router to match up with vg224 settings.
Cisco router - PSTn gateway :
no ccm-manager fax protocol cisco - (disable cisco fax relay)
mgcp modem passthrough voip mode nse - (enables mgcp modem passthrough)
mgcp fax t38 inhibit - (disables t38)
Cisco Vg224
add this command:
no ccm-manager fax protocol cisco - (disables cisco fax relay)
HTH
Sankar
PS: please remember to rate posts!

Similar Messages

  • Payment Advice Issue- Print and fax at the same time

    Hi,
    Currently payment advices are being sent to business partners (vendors) thorugh fax/email.   This is because process module Z_SAMPLE_PROCESS_00002040 is active in the system.  
    What I want to do is to be able to also print the payment advices even if vendor has communication data in the master data.  Program RFFoEDI1 is used with a custom form.   IDOCS are sent correctly to bank and remittance advices are faxed to vendor successfully.   With business wanting hard copies of remittance advices, when I try to reprint after first payment run is done and faxes sent running RFFOEDI1 and the payment document number, system says no records selected.   I searched in OSS and all the notes related to this issue are already in our system. 
    I have tried hard to solve this but no luck even I have done this before with other print programs but no RFFOEDI1.  One option is to remove the fax/email addresses from vendor which allows me to print but client does not want to remove fax numbers from vendor master. 
    Any suggestions will be appreciated.
    Dam

    Look into BTE 2050, through which you could possibly e-mail an additional copy to a generic company e-mail as back up electronic filing of RA. And then you can print it if need to print them on Adhoc basis
    Ron

  • Email and fax a form

    Hi ,
           how can we send a form output as email and fax ? How to do the config for this? Can you explain the process to be done?
    Rama.

    Hi,
    See following code :
    REPORT zmail_att NO STANDARD PAGE HEADING LINE-SIZE 200.
    DATA : BEGIN OF ITAB OCCURS 0,
    PERNR LIKE PA0001-PERNR,
    ENAME LIKE PA0001-ENAME,
    END OF ITAB.
    DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
    receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
    packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
    listobject LIKE abaplist OCCURS 10,
    compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
    w_object_hd_change LIKE sood1,
    compressed_size LIKE sy-index.
    START-OF-SELECTION.
    SELECT PERNR ENAME
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    FROM PA0001
    WHERE PERNR < 50.
    LOOP AT ITAB.
    WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
    SY-VLINE.
    ENDLOOP.
    Receivers
    receiver_list-recextnam = 'XXXXX@X...'. --> EMAIL ADDRESS
    RECEIVER_list-RECESC = 'E'. "<-
    RECEIVER_list-SNDART = 'INT'."<-
    RECEIVER_list-SNDPRI = '1'."<-
    APPEND receiver_list.
    General data
    w_object_hd_change-objla = sy-langu.
    w_object_hd_change-objnam = 'Object name'.
    w_object_hd_change-objsns = 'P'.
    Mail subject
    w_object_hd_change-objdes = 'Message subject'.
    Mail body
    APPEND 'Message content' TO message_content.
    Attachment
    CALL FUNCTION 'SAVE_LIST'
    EXPORTING
    list_index = '0'
    TABLES
    listobject = listobject.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    compressed_size = compressed_size
    TABLES
    in = listobject
    out = compressed_attachment.
    DESCRIBE TABLE compressed_attachment.
    CLEAR packing_list.
    packing_list-transf_bin = 'X'.
    packing_list-head_start = 0.
    packing_list-head_num = 0.
    packing_list-body_start = 1.
    packing_list-body_num = sy-tfill.
    packing_list-objtp = 'ALI'.
    packing_list-objnam = 'Object name'.
    packing_list-objdes = 'Attachment description'.
    packing_list-objlen = compressed_size.
    APPEND packing_list.
    CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
    object_hd_change = w_object_hd_change
    object_type = 'RAW'
    owner = sy-uname
    TABLES
    objcont = message_content
    receivers = receiver_list
    packing_list = packing_list
    att_cont = compressed_attachment.
    Reward points if helpful.
    Regards.
    Srikanta Gope

  • How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

    How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

    Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
    Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
    *http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • HP Photosmart scan and fax no longer working

    Has anyone had their hp photosmart scan and fax stop working after installing lion os x? And, if so, what can be done to fix it? Thanks!

    Download and run the HP 2.8 update.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.3), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

  • Payment advices not picking accounting clerk phone number and fax number.

    Hi,
       We have executed payment program and payment advices got generated. But in the output it is printing everthing i.e accounting clerk name, vendor number and amount. But it is not filling the accounting clerk phone number and fax number even though we have maintained it in our customized transaction code. Will this values in the payment advices will be picked up from standard t.code OB05, there we don't have option to give these two values.
    Can anyboday help me on this.
    Regards,
    Sree

    goto accunt groups with screen layout,
    after creating the group or existing group, double click on account management, in payment transactions make the required fields are required.
    regards,

  • Maintain the telephone and fax number of vendor in Purchase order document

    Dear Expert,
    Hi, i'm wondering here.. why when I create purchase order , and enter the vendor in vendor field, the telephone and fax field in PO header - address tab is not automatically appears, only the street/ house number , postal code and so forth appear?
    I have checked in vendor master, all the communication info are maintained (telephone, fax, email)
    You can give me any idea about this?
    Thanks
    Pauline

    Hi Nick,
    Do you mean the Purchasing Organisation comms  in the vendor master data ? Yes I have maintained.
    actually the field in vendor master and the field in purchase order have the same name SZA1_D0100-TEL_NUMBER why it is not link to each other?
    Thanks
    Pauline

  • Multifunction Printer/Scanner/FAX machines and FAXing from the desktop.

    I've got a Canon MP530 thanks to an Apple Bundle and after a lot of gyrations, it has come down to be that neither I, Canon, nor Apple can make this unit send or recieve FAXs from the desktop!
    Apple seems to be "stunned" (better word than "clueless") about this lack of functionality. Canon's response is (literally) "Buy a PC."
    I know I can do software that will let me FAX but but that is not an option at this point. I've got four machines who all can plug into the same printer/scanner/unit and there's no reason that this machine shouldn't be able to send a FAX for me.
    So, I'm here posting this message wondering if anyone has purchased an "All-in-one" unit (preferably part of an Apple bundle) that supports printing from the computer, scanning to the computer, and FAXing to and from the computer and that they've actually used (themselves) and seen work.

    Yes absolutely.  I set it up last Fall and have been using it until last week, at whick time I lost wireless connectivity with router for no reason at all.  I can not remember how to do it now and I am looking for the answer myself.
    This link to an online chat on www.hp.com with a tech might help you.
    http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-006&h_lang=en&h_cc=us&h_product=3204781&h_client=S-A...
    I unfortunately upgraded my browser to IE8 last week and the chat support online does not support that browser.  If you get an answer, I would appreciate it if you would post the answer on this thread so that I can re-learn it myself.  Thanks.  Good Luck.

  • Why does my pdf file open in 'windows picture and fax viewer'?

    Anytime someone sends me a pdf file, when I click 'open', it automatically opens up my 'windows picture and fax viewer' and of course, I get nothing. So, in order to read a pdf file, I must first save it, then go into my Adobe Reader, and open it from there. Can anyone tell me how to change that? It's only happened since I upgraded Adobe Reader to 8.0. What am I doing wrong?
    Thanks

    Right click the pdf file and click on Properties. In the General tab click the Change button and associate the Adobe Reader 8 program to the pdf file. Click Ok, then Apply.
    I assume the connection to this forum is that the pdf file is a Lighroom generated slideshow.

  • I think the last update did not work, and now I cannot open jpeg attachments with windows picture and fax viewer, it is not listed in the tools/options drop dow

    I don't believe the last Thunderbird update worked, there was a very fast error message. But since then I cannot open jpeg attachments in Windows Picture and Fax Viewer. If I go to Tools, then options, the jpeg line is grayed out, and the drop down menu does not show Windows Picture and Fax Viewer. The windows picture and fax viewer still works on my computer, but not for opening attachments.

    I did as you said - deleted the entry for jpeg, but when I tried to open one there is not an option for Picture and Fax Viewer in the drop down, and it can't be found by browsing. It's just not there anywhere even though I can see pics in it except in email attachments.

  • PSC 1350 software not working - not showing up in "printers and faxes" as a choice

    My mom's HP PSC 1210 won't feed the paper anymore.  After cleaning the rollers and making sure regular procedures are followed the paper just doesn't feed.  She has an older HP laptop and doesn't like change - she's 92 years old!
    I belong to a computer club for over 30 years and someone gave me an HP 1350 AIO printer that makes copies so I know it's working.  I have a Dell Dimension E510 computer with XP that someone gave me as a computer I can experiment with. 
    So I went to the HP site and first downloaded "HPSupportSolutionsFramework-11.51.0049" and then the HP Officejet and PSC Full Feature Software and Driver file and ran it.  Nothing seemed to happen after it "installed", no messages at all and it doesn't show up in "printers and faxes".
    So then I decided to download the HP Officejet and PSC Basic Software and Driver  file and also ran it with the same result.
    Where do I go now and what can I do to get the 1350 working - first on the Dell computer, then on my mother's?

    Hi safewaterman,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to get the printer installed on to your computer.
    When doing the installation, do you have a USB cable connected before you run the download or after?  If you do have it connected before, the computer will not see the printer when doing the installation.
    We need to remove the USB cable from both printer and computer and leave it disconnected.  Uninstall all of the software and drivers from the computer.  Once the uninstall is complete, restart the computer. 
    When the computer is back on, make sure that you do not have any Firewall or Anti-Virus protection running on the computer. 
    Run the Download of the Full Feature Software and Driver bundle and wait for the installation to prompt you as to when to connect the USB cable.
    Let  me know how you make out with the steps I provided.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How do I get Windows Picture and Fax Viewer to be the application used to view pics, images? It doesn't even show up in the list of "other applications".

    Image files(jeg, gif, etc) are assocaited with the picture and fax viewer in the files options but firefox doesn't see the app, even inthe open with other list

    The Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.<br />
    You need to set Windows Picture and Fax Viewer as the default viewer in Windows.<br />
    Then it should be listed automatically in the Mozilla Firefox Browse dialog.<br />
    You can look at an alternative program for viewing images:
    * Irfan View - http://www.irfanview.com/

  • Query to get the customer's ship_to  Phone# and Fax#

    Gurus -
    Can anyone of you please help me in getting a query to shows the phoen and fax# of the Customer's ship_to Phone# and fax#
    customers--> on Address tab ( click open) On next screen click on contacts tabe for SHIP_TO row , there under the communications section, there are telephone and fax details , i want to get those details.
    Please help me in getting the query to get the fax and phone#.
    Infact I am using the below query and still having issues getting the correct fax# ( using teh same logic for phone#)
    select DISTINCT DECODE(PHONE_AREA_CODE,NULL,'',PHONE_AREA_CODE||'-')||PHONE_NUMBER
    FROM hz_cust_accounts_all hca,
    hz_parties hzp1,
    hz_cust_acct_sites_all hcas,
    hz_cust_site_uses_all hcsu,
    hz_relationships hzr,
    hz_org_contacts hoc,
    hz_contact_points hcp,
    hz_parties hzp,
    hz_cust_accounts_all hca1,
    hr_locations hrl
    WHERE 1 = 1
    AND hca.party_id = hzr.object_id
    AND hzr.relationship_id = hoc.party_relationship_id
    AND hoc.party_site_id = hcas.party_site_id
    AND hcas.cust_acct_site_id = hcsu.cust_acct_site_id
    AND hzr.party_id = hcp.owner_table_id
    --AND hcp.primary_flag = 'Y'
    AND hzr.subject_id = hzp.party_id
    AND hzp.party_id = hca1.party_id(+)
    AND hzp1.party_id(+) = hca.party_id
    AND hcsu.location = hrl.location_id(+)
    and hcsu.site_use_id = hsu.site_use_id
    AND hcp.OWNER_TABLE_NAME IN ('HZ_PARTIES')
    AND hcp.CONTACT_POINT_TYPE IN ('PHONE')
    AND hcp.PHONE_LINE_TYPE = 'FAX'
    AND hcp.STATUS = 'A'
    and nvl (hcsu.status, 'x') = 'A'
    AND hcsu.SITE_USE_CODE = 'SHIP_TO'
    --and hcsu.site_use_id = hsu.site_use_id
    -- and hcsu.cust_acct_site_id = hsu.cust_acct_site_id
    --and hca1.cust_account_id = hca.cust_account_id                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    What is the responsibility name? Form name and navigation path?
    You can determine the query from the form itself as follows:
    - Query the record(s)
    - Click on Help > Diagnostics > Examine
    - Under 'Block' field, select 'SYSTEM'
    - Under 'Field' field, select 'LAST_QUERY'
    You may also review the following note:
    Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=259722.1

  • Query for Customer site Phone number and Fax number  in Oracle Apps

    Dear All,
    Can anyone guide me how to write qurey for Customer site phone number and Fax number for Acive customers.
    Thanks in advance.
    Best Regards
    NRC

    Hi Team,
    This is a shipping report in header level we have the customer information with site address. The requirement is along with site address we need to show the phone number and Fax number .For this we need to write the formula column.Thes are the comes through HZ parties only. I have no idea how to achieve this.
    Best Regards
    NRC

  • Reg Telephone and Fax Number updation in Purchase orders

    Hi Experts,
    I need small information about Telephone Number and Fax numbers updation in Purchase Orders.
    Actually my user requirement is they have been provided the Purchase Organizations XXXX,XXXX.
    From this Two Purchase Orgs the users who are all created the POs the Telephone Number,Fax Number need to pick from the relvant User Master(user profile SU01).
    For this how i can discuss with my Abaper.
    If you have any idea on this please suggest me.
    Brgds,
    RK

    Hi RK
    Where do you need to update this information in the PO or the PO output ( Print / Fax / email)
    If you want to update these in the PO  then you need to use the customer exit.
    Enhancement        MM06E005 - Customer fields in purchasing document
    If you need to determine the details in the PO output then the smartform / script  being used needs to be modified to determine the data of the user derived from table EKKO - ERNAM  created by
    The address number needs to determined from table USR21 using the user ID  - PO created by( EKKO - ERNAM_ and using the address number derive the telephone number and fax number from table ADRC.

Maybe you are looking for