VI crashes on load because of hidden tab in tab control

As part of the user interface I'm using a tab control which has hidden tabs. However there seems to have been some problems with the last few saves because whenever I try to load the VI, LabView crashes with the following message:
The instruction at "0x006acca1" referenced memory at "0x189753e4". The memory could not be "read".
This appears to be because one of the (supposed to be) hidden tabs is visible on startup. If I'm fast enough, I can click on the tab, in which case it disappears and the VI loads normally. I've tried saving and reloading after doing that, and the VI is fine. However of late I can never seem to click fast enough, so I can't load the VI.
Is there anything that can b
e done (other than redo all the work... which would really be a pain)?

Hello,
Are you using LabVIEW 6.0 or 6.0.2? I recommend you install the 6.0.2 update, if you have not already, as there were some problems with tab controls that were fixed in the update. Have you mass compiled your VI? Often if there is something corrupted in a VI a mass compile will fix the problem. You can read the on-line help in LabVIEW to learn how to perform a mass compile.
Have you tried deleting and re-creating the offending tab control? See if that helps. Also...have you tried loading the VI on another computer, just in case something is wrong with the computer you are currently using?
If you are still experiencing the problem, is there any way you could attach your offending VI to this thread, and I can take a better look at it, and perhaps get R&
D's opinion? Let me know...
I hope one or more of these suggestions helped. Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

New websites typed into address bar or clicked from bookmarks will not load, links searched in google can not be clicked but if opened in a new tab the tab opens but nothing loads. This seems to hapen on a daily basis and requires a computer restart.

Firefox does not crash.
It is not unresponsive.
New websites can not be loaded.
Websites currently open in tabs are still able to be used and continue to work fine... all links in running websites seem to work.
Google is able to be loaded in a new tab (possibly because it had been run previously), search works but searched items can not be loaded.

This forum is for the Shockwave Player - the plugin for running Adobe Director files in a browser. You need a forum for the Flash Player - the Shockwave Flash plugin. Blame Macromedia for confusing the name space of the 2 separate and distinct plugins

Firefox crashes when loading Gmail, and random other pages, and freezes often.

Firefox upgraded itself to 3.6.10 sometime last Friday, I believe, and every since I cannot get into gmail, and it freezes often. When I try to log into gmail it will crash immediately. Sometimes if I click "sign in" rather than hitting "enter" it will load, but will lock up or crash within minutes or seconds. It also will lock up if I have more than three or four tabs open, often when loading a video, and crashed while loading Nexis, which I use often for work to do research.
I have disabled add-ons, disabled extensions, run in safe mode, uninstalled and reinstalled, rebooted, downgraded, re-upgraded. Nothing has worked.

Problem does not seem to occur on a modern Win XP nebook with 1 gig RAM, but does on a relatively old laptop running Win 2000 with 98.5 MB ram.
Error message states that a script is running from a Firefox directory and asks to stop it. Crash occurs anyway!

LV crashes while loading my llb, but the built app. functions correctly???

I�m hoping someone may understand the cause of the LabVIEW crash I�m experiencing.
LabVIEW 6.1 crashes and Windows 2000 says, "LabVIEW.exe has generated errors and will be closed by Windows" when I try to load an llb by clicking on the top-level vi from within LabVIEW or when opening the llb from outside LabVIEW. It crashes while loading particular sub-vi�s of the llb. If I try to load the offending subvi�s directly, I also get the same crash. If I build the llb into an application, the build goes smoothly and the resulting application functions correctly. If I use a �splash screen� approach and do not load the offending sub-vi�s (by not opening vi references to them), they load-up fi
ne when the top-level vi loads and then I am able to edit and re-save any vi of the llb including the offending sub-vi�s. I�ve tried re-saving the llb as a separate development distribution and still get the same crash behavior. I�ve also tried saving the offending sub-vi�s to separate files outside the mother llb (after getting them open with the splash screen approach) and I get the same crash when I open these files. If I save one of the offending sub-vi�s as a separate llb, I can�t get it open even with the splash screen approach. I�ve loaded the latest video driver for my Dell Inspiron 8100 laptop and I get the same behavior on a Dell Dimension 8200 desktop that is also running Windows 2000 (Version 5 SP4). There are 110 objects in my llb that includes *.vi�s, *.rtm�s, and *.ctl�s.. Any ideas as to why/how this is occurring and how I can fix it? Is this a known 6.1 bug that is fixed in 7? Any info would be greatly appreciated. I�ve included my splash screen like loader, f
or what it�s worth. Thanks.
Attachments:
__loadVIs.vi ‏88 KB

Thanks for responding. Your understanding is correct. Mass compiling was one of the first things I tried (although I failed to mention it). I also un-installed and re-installed LabVIEW. It crashes during mass compiling of the full llb, although the vi that it appears to be working on when it crashes is not an �offender�, i.e. I can open that vi fine. The crash during mass compiling is the same crash, i.e. Windows says it had to close LabVIEW because it generated errors.
I�ve attached one of the offenders. It is missing many of it�s sub-vi�s so you�ll have to hit �ignore vi� a bunch when opening it. (The llb of it is ~2.6 MB. I thought that might be too big/rude to post.) This vi crashes LabVIEW upon mass compile or upon opening it (after hit
ting �ignore subvi� a bunch).
I was going to attach an llb of another smaller offender, but in the process of editing it to be a little prettier and better documented, the problem kind of vanished for that vi. The main routine still crashes when I mass compile the full llb, but now I can open some of the old offenders without incident. I still can�t open the main routine directly as it crashes LabVIEW. Thanks for your time.
Attachments:
aveParam.vi ‏769 KB

Logic crashes when loading preferences

hi!
can anyone please help? for some reason logic has started crashing when loading the preferences. i noticed for some reason it was playing through the built in audio rather than my motu interface, so i tried loading the preferences to change it and it just crashes every time. this has happened since i reinstalled logic studio 8, because it was giving me an error message on startup that caused it to crash. the error message i was getting was saying i have the wrong pro applications support installed (of which i could not alter or upgrade for some reason). so i went for a reinstall.. and now this other problem. any help would be greatly appreciated!
i am running logic studio 8.0.2 on a powermac dual 2ghz G5
with 3gb ram and osx 10.5.3

Don't wipe your hard disk! (yet)
It's probably that your preferences have become corrupted. Go to User/Library/Preferences and trash your Logic preferences (com.apple.logic.pro.cs & com.apple.logic.pro.plist).
Reopen Logic and see what happens. The only problem is that you will lose all your keyboard commands etc., but they're a lot easier to recreate than reinstalling and authorising everything onto your hard drive.
Also, make a copy of your preferences once you've set everything up so that if you need to trash your preferences again sometime in the future, you can just replace them with the copies you've made.
I guess if none of this works then you may need reinstall Logic and, at worst everything else.

Safari keeps crashing when loading large data on web pages

I have owned my iPad 3 for more than a year now and I have never encountered this problem but ever since I have updated to the latest iOS version(7.1.1), my safari keeps crashing on my community site where threads have maybe over a 100 comments in them.
Now whenever I open a thread page on Safari, it loads for a few seconds then crashes, to make things worse for me is one in a while when it crashes, it reboots my iPad. I have seen several similar questions asked by other people regarding safari crashing when loading large amounts of data and got help saying that there's something wrong with the CSS. or something but I never got any idea on how to resolve this bug.
Can anyone tell me how do I prevent my Safari from crashing everytime I open a thread? Any solutions? Because I am getting really ******.
(Ps: I have already tried other browsing apps such as Google Search and Chrome, they still crash. I even tried letting it load half-way and then stopping it but it isn't going well.)

I have restored my iOS devices a number of times in order to resolve issues and it has gone very smoothly every time. I am not going to lie, it takes a fair amount of time to backup, restore the iOS and then restore from the backup, but it could very well resolve the issue.
On the other hand, it may not help at all. Restoring the software is a standard troubleshooting measure And that is why it is recommended when other suggestions aren't working. But before you restore, there are a couple of other things that you could try,
Reset all settings. Settings>General>Reset>Reset all Settings. You will not lose any data when you do this, but it does take some time to enter all of the device settings again, so be aware of that.
Another thing to try is to erase the device and start over. This is different than restoring to factory settings. Reads rhis for more information.
iOS: How to back up your data and set up your device as a new device

Efi detects wrong resolution - osx crashes while loading loginwindow.app

Hello,
I have a strange problem: Sometimes EFI loads OS-X with wrong display resolution which ends into a crash of loginwindow.app.
Let me explain it in more details: First I had a system with rEFIt. Everything worked like a charm ... until on some day (I think it was EFI Update 1.5.1, but I don't know it exacly) my mbp rev3 sometimes decided to show EFI menue much larger as you would expect it on a 640x480 display. This happens in about 3 of 4 boots. If this happened, OS-X crashed while loading loginwindo.app and Windows crashed before showing the windows loading screen.
Then after talking with some guys in irc unofficial support I reinstalled everything because they said all my 3rd parity software could be the reason for this error. Now I have a fresh installed leopard and the error still occures - and the error also occures when I boot into leopard disc.
*To describe the problem in a few words:*
- EFI detects display resolution wrong in about 3/4 boots
- loginwindow.app crashes if EFI detected resolution wrong
- while crashing some strange artefacts are shown on grey apple screen / on verbose mode console, sometimes screen gets orange for about 0.1 sec before artefacts are shown
*I tried following things to fix the problem:*
- reset vram: no result
- verbose mode: does not show anythingnew compared to right boot, after message "loginwindow.app is loading" "login windoe application started" i get some artefacts and the orange screen
- single user mode: did't find something in logs, but I also didn't find an efi log
- hardware diagnostics: says everything is right
- Firmware Restoration CD: does not work because my mac seems to think that everything is right.
- plug off all external usb devices: no effect
Now I really don't know what to do, I don't even have an idea where to find this error and what to try next. The mbp is my only computer, so I would find it excellent to solve the problem for myself.
Thanks for any help what to do
Message was edited by: TheInfinity

I'm not sure why you're password is wrong when you type it directly in your station, but I have found something related to remote logging.
I had always gotten the password wrong when I tried to connect through VNC from my Linux to my Mac. The problem is that for some reason, my keyboard layout is applied twice. I'm using the colemak layout, so if I want to type 'K', I need to click on the key that is marked 'N' in QUWERTY keyboard.
BUT, through VNC to my mac, if I want to type 'K', I need to type the key that is mapped to 'N' on colemak layout, which is the key marked 'J' in QUWERTY.
So to type hello, through normal colemak, I would click on hkuu;, but through VNC to the mac, I need to click on hniip.
Here's the map that can be used to generate the above:
Qwerty -> Colemak
k -> e
n -> k
j -> n
e -> f
h -> h
u -> l
; -> o
p -> ;
i -> u
My solution was to find out how my password should be typed with double-applied colemak, then after log in, change the keyboard layout to QWERTY, and then it is applied only once and I can type in normally. I'm not sure what's the cause of the bug, but at least you have something to try..

Facebook, farmtown won't load because of adobe flash player, Mozilla won't let me download

Facebook, I go to farmtown but it won't load because I have to download adobe flash player. But Mozilla won't let me download adobe flash player

Hi..
Quit Safari.
Open System Preferences > Flash Player then select the Advanced tab.
Click: Delete All
Now select the Storage tab.
Click Delete All
Relaunch Safari to test.
edited by: cs

Adobe Bridge CS3 crashes on load in my Windows 7 workstation.

Adobe Bridge CS3 crashes on load in my Windows 7 workstation.
I recently completely removed, deactivated and reinstalled all my Adobe Creative Suite CS3 Master Collection to solve some problems with other application from the suite and now I'm surprise Bridge continues to fail. In my portable workstation the same software (Bridge) uses to work.
I tried launching Bridge under several compatibility modes. All failed.
Is there any know bug I should be aware of? Any fix?
Is this a common problem?

Curt Y. Thank you for your answer.
It was only Bridge who was crashing. It failed to load and Windows was giving an error message.
I tried your suggestion, and resetting all options in the reset window it now loads. It was as simple as that.

New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

When using tabbed browsing, if I click to open a new tab, why will it not automatically load my homepage in the new tab instead of a blank window?

I use tabbed browsing with the tab bar visible at all times so I can click on a new tab when convenient.Why can my homepage not load automatically on that newly opened tab insted of a blank screen with a search bar saying "you've opened a new tab".........well yeah. I have looked through the options and cannot find anything to open a new tab with the homepage. Is it possible? Have I missed it? If it's not possible, could you make it so?
== This happened ==
Every time Firefox opened
== I opened a new tab.....see above

The default is to load a blank page.
Try one of these add-ons:
http://sogame.awardspace.com/newtaburl/
https://addons.mozilla.org/en-US/firefox/addon/777

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

You would get better response from the iTunes community forum.
Have a nice day!

"can't load because some files are already in use" - Adobe reader! How do i close whatever i can't find that they say is in use!?

Can anyone help me get Adobe reader 11 installed??? The error message when I'm practically done says the file can't be loaded because some files are already in use - and it refers to Adobe reader! What do I do to get past this??? Help! I need to install adobe!
I had been having a problem after I tried to do an adobe update, so i deleted and tried to reinstall the program and it won't let me ! Any suggestions???

Hi Jody414,
Use the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) to remove Reader completely from the machine.
Download Reader 11 from: Adobe - Adobe Reader Distribution and install and check.
Regards,
Rave

I just updated to 4.0.1 and I get the "We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts" However, it just keeps popping back up, firefox never restarts!!!

This morning I had a popup on my Windows XP PC stating that the 4.0.1 update was available. I upgraded. now, i receive the following error: We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts. You can submit crash report data, blah blah blah (which i have submitted several)
But, firefox DOES NOT ever open. It just pops back up with that same report window, over and over.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Firefox crashes on loading; it's trying to restore a previous session. Can't retrieve crash report.

When I try to open Firefox, I briefly see the program trying to open -- the address line says "restore session." Then it crashes. I get a screen saying "We're sorry" "Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts."
== This happened ==
Every time Firefox opened
== Today. I had received a message that I needed to restart my system. I think it was to install some type of updates. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)

''Seemed'' to be oerating normally is a good choice ow words. I too though the safe mode, plus not restoring session would solve my problem, but then opening certain tabs --I wan't really able to experiment much before a crash, but I thought may sign-in or automatic sign-in ones--it would crash again. I really like and miss Firefox, and wish I knew haow to revert back to the previous version before it automatically udated to Firefox 4...

VI crashes on load because of hidden tab in tab control

Similar Messages

Maybe you are looking for