Viable options for having just Photoshop and After Effects?

I have the single app plan for $20/mo, for After Effects. I've come to realize that I would like, as well as I kind of need, Photoshop. However, I don't wish to purchase the complete plan ($50/mo). I noticed there is a Photography plan for $10/mo, however since I already have a plan I'm unsure as to how I would go about getting two plans, or if there is a way to add on to my current plan. If I have the Photography and the Single App plan together it would be $30/mo, and I would have everything I need for $20 less than the complete.
Any viable options, advice, or suggestions would be much appreciated.
Thanks,
- Infinity

You can of course get the photography plan, you just do not "add" it. It's simply a completely separate purchase.
Mylenium

Similar Messages

Can I use my current CS6 Photoshop and After Effects plug-ins if I join the Creative Cloud?

I am interested in getting a Creative Cloud membership but am wondering if I will still have access to all of my CS6 plug-ins for Photoshop and After Effects?

you can still use your cs6 versions along side the cc versions.

How do I download Photoshop and after effects on Vista?

Hi, I have Windows Vista , and I want to download Photoshop and After effects, but the latest version is not supportable on Vista, what should i do?
Thanks for your help

Ok, thanks for the answer, I was considering getting a new PC any ways

Recent graduate, beginning my career in theatre video - what's the cheapest way to get Photoshop and After Effects together?

Hi,
As I said, recent graduate. Not a lot of disposable income. I require Photoshop and After Effects to progress in my career. What's the best way to get these two programs with creative cloud?
Thanks!
Ellie

There is a special photographers plan, and then buy a single item subscription for After Effects
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html

Im getting error 16 every time i use photoshop and after effects plz any suggestions ?

i have downloaded photoshop cs6 and after effects cs6 they worked properly and now they both give me error 16 when i try to open them

This thread from the Adobe After Effects Forum might be useful, especially some of the links, plus Replies near the end: http://forums.adobe.com/message/4299880
Good luck,
Hunt

Just wondering does a Creative cloud complete plan annual also allow access to dreamweaver, photoshop, and after effects?

I am a little new to this. I just wanna know if the 49.99 offer also lets me have after effects/ dreamweaver/ photoshop and so forth. I use these three programs quite often. I just wanna know if that is what the plan provides.

Everything on this page is included in your full Cloud membership provided you've got the hardware and operating system to run the apps
Explore Adobe desktop apps | Adobe Creative Cloud
Most apps require Windows 7 or later or Mac OS X 10.7 or later.
Full system requirements listed here
System requirements | Creative Cloud

PAL Widescreen format between photoshop and After Effects

Hi, I wonder if someone else has bumped into the problem I have and has a solution. I am working with Photoshop, After Effects and Premiere Pro(all CS3 levels) to create a project using still and moving images. I am using PAL widescreen (16:9) format for the first time so have cropped my still images in Photoshop to 1024 x 576 pixels. Starting a new project in After Effects I chose PAL/Widescreen and set the resolution to 1024x576. When I bring in my images and drop them to the timeline they have the same height as the AE screen but are significantly shorter than the displayed 1024 pixel size. If I drop the images into Premiere they will size to 1024 x 576. Am I doing something drastically wrong here ?

Just to add to this, I am confused over exactly what is happening inside
After Effects with regard to interpreting PAL footage!
When you go to the Compositions Settings dialogue box there are two Presets
on the drop down list for non-square pixels; PAL D1/DV and PAL D1/DV
Widescreen.
Both comps are 720 x 576 pixels.
However when you go to the drop down list for Pixel Aspect Ratio the two
options there for non-square pixels are PAL D1/DV (1.09) and PAL D1/DV
Widescreen (1.46)
According to my calculations:
PAL 4:3 in square pixels = 768 x 576 (768 / 4 * 3 = 576)
Doing the maths the Pixel Aspect Ratio rounds up to 1.07 not 1.09
768 / 720 = 1.06666666667
PAL 16:9 in square pixels = 1024 x 576 (1024 /16 * 9 = 576)
Again doing the maths the Pixel Aspect Ratio rounds up to 1.42 not 1.46
1024 / 720 = 1.42222222222
If the Pixel Aspect Ratios given are correct then the Width of both
Compositions should be 704 not 720!
768 / 704 = 1.0909090909 which rounds up to 1.09
1024 / 704 = 1.454545454545 which rounds up to 1.46
Using the preset comp Width with the preset Pixel Aspect Ratios doesn't seem
to add up or am I missing something fundamental here?
Perhaps I should just import the footage using whatever Pixel Aspect Ratio
into a PAL comp with square pixels and then just use the fit to comp command
to make sure it really does fit!
John (aka Jack)

Dynamic Link with Encore, Photoshop, and After Effects

Intention 1: Im using Photoshop CS5 (PS5) & After Effects CS5 (AE5) to create a DVD menu for Encore CS5 (EN5). I used the 'Film & Video' preset in PS5 to make a standard HD 1440 x 1080px image size; which looks the same in AE5. My problem is in PS5 the 'Pixel Aspect Ratio Correction' size is the size i want the universal size to be. Its a more stretched version which looks better to me, but may not work well with HD monitors (as this DVD will be played on a 17" laptop).
Question 1: Is there any way to have AE5 recognize the 'pixel aspect ratio correction' from PS5 and make the composition settings that size in AE5?
```
Question 2: What are standard sizes for computer monitors that would work welll mostly with the Dynamic Link in AE5 and EN5 working with PS5?

Yes, it can be very confusing. With CS5, however, as long as you keep it all the same, it doesn't require setting. But you do need to understand it.
Just start with the help page:
http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103906c6dea-7f3aa.htm l
FYI, you may have seen these, but if not, help re Encore menus using AE:
From Encore help:
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
From AE help
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7e45 a.html

Photoshop and After Effects is not installing with the new updates, any suggestions?

Each time the update says that the "update failed". I have tried the update several times, both on my laptop and my iMac. Photoshop finally installed on the iMac, but neither will update on the MacBook Pro.

This is a bit of a shot in the dark, but check to make sure that you have Rosetta installed in Mac OS and then try again to install After Effects. I know that Mac OS has a (mistaken) dependency on Rosetta for After Effects to run. It _may_ be that this dependency also causes a problem with installation.
Here's a document that lists some know issues with After Effects on Snow Leopard:
http://kb2.adobe.com/cps/516/cpsid_51667.html
When you do get After Effects CS4 installed, be sure to immediately update to After Effects CS4 (9.0.2).

Does anyone have a working amtlib.dll files for Primere Pro CC and After Effects CC?

I have had problems when installing it, it s saying it is missing the amtlib.dll file (on both) I do have PS CC working, but apparently PPCC and AECC require different amtlib.dll files
Please don't post any spam links :/
Thanks!

download the installation files and properly install your apps.
you might want to uninstall and clean before doing that (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6).
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Photoshop and After effects

Hi all,
I am using Photoshop to create some elements to use in an After Effects compostion. I save the file as a PSD and import it into After Effects as editable layers. Is there a way to allow the imported file to update if I make changes and save it again in Photoshop? I feel like I have been able to do that in the past with Photoshop to Premiere PSDs so I figured After Effects should have the same functionality. Anyone know? Thanks!
MODs please help me move this post if there is a better place, thanks!

You need to ask that in the After Effects forum.
Photoshop isn't involved in updating contents in After Effects.

Options for having cFP write and read file

I have a cFP VI that runs on a cFP 2110 controller for doing process automation on a custom piece of equipment. It seems that each month we use the same equipment for a slightly different automated process routine. What I have done in the past is to make a copy of my VI's and real-time project and then make the changes in the code for the new process. Most of the changes to the code between processes are just changes to numeric controllers to change ramp and slope times or the number of times the code repeats a set of steps. I have been playing around with writing a sort of configurations page to my VI to allow the user to change some numeric controls, save them to a file using the Read Key.VI and Write Key.VI. In the simple tests I have done, this works If I have a target VI on the cFP 2110 and a host VI where I can have the configurations page and save the file to my computer's hard drive.
The configurations file I would create would probably have 15-30 numeric controls and maybe some string commands. I have a couple of questions about doing this. Do I need to go back and create both Target and Host VI and communicate between the two using shared variables, or can I just keep my current VI and write a subVI that would save my files to the cFP controller? If I save the files to the cFP controller, can user set the numeric controller and save the file and/or likewise call-up any of say one of say 10 differnet files to populate the various sub-VI and run?
Finally, provided that I can write and read these small configuration numeric controller files to the controller, is there any advantage to writing the files to one method or the other: writing to the controller vs, creating a target and host VI to load the data?
Thank you for the help.
Danny
Attachments:
Test read write key.vi ‏58 KB

StepanieO,
I finally had a change to play around with the cFP file write and read again. I was able to write a the cFP and read the file back using write to spreadsheet and read from spreadsheet. The one problem I can't seem to figure out is how you browse the cFP to select a file. If I enter the file name and path into the string command it works. But If I try to browse the cFP, the browse button only shows the computer hard drives. Is there a way to browse the cFP controller for a specific file?
Thank you for the help.
Danny
Danny
Attachments:
Write to spreadsheet.vi ‏18 KB

Whenever I try to open the installed Photoshop and After Effects, It keeps giving me the terms and conditions, I click yes and it comes back, please help!

Somebody please help me I just fixed an issue and now I have another one!

In that case perform the same step once again.
1.Then Delete Adobe Application Manger and OOBE folders from C:\Program Files (x86)\Common Files\Adobe.
You may need to Quit Creative Cloud desktop to Delete OOBE..
Then reinstall Adobe Application manager from below link
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
2.Also try to give full permission for SLCache folder.
Right click on SLCache and open properties. Then uncheck Read only and Click on Apply
Click on security tab and click on edit.
Then click on user and give full permssion.
Then launch the products and check.
If it is not working,
3.Press Windows + R keys. Then In the Run window type inetcpl.cpl. It will open Internet Options.
Click on Connections > LAN settings.
Make sure under proxy servers there are no boxes checked.
If it is checked uncheck it and check Automatically detected settings, Click on Ok.
Then try.

Photoshop and After Effect CC Performance Problems

The same files work smoothly in CS5, but not in CC

Momawhich wrote:
The same files work smoothly in CS5, but not in CC
Not in the general case. Photoshop CC is actually faster in most ways. I've measured it personally.
For YOU maybe it's not working as well, but that probably means there's something about your system that's getting in the way of you getting good performance.
It might be helpful if you would go into Photoshop CC's Help - System Info menu item, copy the results, and paste the data in a post here. There are many experts here who might be able to suggest things you can do - quite possibly without spending any money - that will bring your performance up.
Good luck.
-Noel

Why is "edit in Audition" greyed out in Premiere Pro and After Effects?

Since the CC 2014 launch, the option in in Premiere Pro and After Effects to "edit in Audition" is greyed out. Right-clicking a clip in Premiere Pro doesn't have an option for Audition. I cannot send my compositions, sequences or clips to Audition for audio editing. I contacted an Adobe Support personnel earlier this evening. They suggested to go into my Mac's System Preferences and enable a root user, log out of my account, log into the root user, shut down and boot up into safe mode. None of these scenarios worked. It is still greyed out, in both user accounts.
Is this a known issue? I even uninstalled and reinstalled Audition. Still nothing. All my Adobe apps are updated. My Mac is updated. Again, never had this issue before.
I'd appreciate any assistance!
Thank you!
Cheers,
Evan Lockhart

I may have an answer for you, but not sure if my resolution will work for Macs.
First, here's my system and initial info. I'm using a work computer, operating system is Windows 7. I just upgraded to Adobe CC 2014 about a week ago, and I also uninstalled the previous versions of all my Creative Cloud programs after installing the new versions (CC 2014 doesn't just update the previous version, it installs a new program and doesn't automatically uninstall the previous CC programs). Not sure if the uninstall is necessary, for this resolution to work.
Anyway, after I installed Premiere Pro CC 2014 and Audition CC 2014, the Edit Clip in Adobe Audition command was available from the Edit menu in the Menu bar, but was disabled in the right-click menu for the sequence (for the right-click menu, it was visible, but greyed out and disabled). When I tried to use the command from the Edit menu in the Menu bar, it gave me a dialog box to fill out and it created a new folder (titled "Adobe Audition Interchange"). So, the command, when selected from the "Edit menu" obviously uses a different process than the command from the right-click menu. Anyway, I didn't want a new folder created or to fill out a dialog box, I just wanted it to behave like it used to. Basically, when I right-click the sequence and select Edit Clip in Adobe Audition from the right-click menu, it just opens Audition and the audio waveform is visible.
I was able to resolve this and get the right-click command working by reading a couple of articles on this same issue from Adobe CC (not CC 2014) and using those to figure out how to fix this in Adobe CC 2014.
Here's what I did:
I had to locate my .sesx files in my system. They are NOT in the same location as they were for the previous version of CC (at least, they weren't for me). I had to use the Search command and look for .sesx extensions to locate them.
Found them under the path C:>Users>Public>Public Documents>Adobe>Audition>7.0>Session Templates. Note that (for me), there was a folder titled 6.0 on the same level as the 7.0 folder. I selected the 7.0 folder as that folder contained the most recent set of .sesx files. I checked the 6.0 folder and those were the .sesx files from the previous version, so I deleted that folder just as a clean-up step.
I right-clicked on one of the .sesx files in the Session Templates folder and then selected Open with from the right-click menu. The Open with dialog box displays and provides a list of programs.
I selected Adobe Audition CC 2014 from the list of programs (you may have to browse to find it) and then selected Always use the selected program to open this kind of file. I then clicked OK to submit the configuration command and close the Open with dialog box.
I restarted Premiere Pro CC 2014 and the Edit Clip In Adobe Audition command was now enabled on the right-click menu and was working properly.
I wept with joy..... OK, not really, but I'm always irritated at ridiculous regression errors and a lack of thorough testing of new software versions, so I am happy to resolve frustrating issues.
Don't know if this will help you, or if you already resolved your issue. Either way, good luck!
~ Jim

Viable options for having just Photoshop and After Effects?

Similar Messages

Maybe you are looking for