Video Component Mute Button to Off by Default

Hello,
I want to set the FLV component Mute button off by default. I
have seen this question asked across many forums but not answered.
All the literature I read it only tells you how to associate
the mute button with the video clip but not how to control it. The
only control is the volume. When set to 0 overrides any toggle of
the mute button and keeps the sound off.
ex. videoclip.muteButton = mute; //mute being instance name
of the mute button component
Can someone give me any direction on how to set the default
to mute.
Thank You, Jacob

There is a Product Specific Configuration Layout option called Hide Video By Default which does exactly that.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

My iphone 4 does not ring - the mute button is off - can hear calls coming in but not on the speaker - no music or ringtones

My iphone 4 does not ring - the mute button is off - can hear calls coming in only by vibrate - cannot talk using speaker - no music not ringtones - It is not the mute button!

Sorry this took so long... This sounds hokey, but there is a sensor inside the headset jack on the iPhone that is sticking.
First; unplug the headset and try. Then, if does not ring still - do a reset with the headset out. Reset = hold the Home button and the sleep bottom on top at the same time until you see the Apple (ignore the slide to power off).
If this does not wor - here comes the hokey part... and you can take it by an Apple store at this point; anyway, use a tooth pick (wooden) and twigged it around in the jack on the gentle side.
Only try that last "hokey" part because it could be hardware in there sticking.
After that - have you called Apple Care?... It is a repair issue.
Good luck

How to add a mute button without using the default skin?

I want to use a mute/unmute button for my current project which does not use the default skin. I searched the web and found the following solution.
http://kb2.adobe.com/cps/163/2ed9f163.html
I followed the instruction and it works fine on single slide. The problem is that it does not carry through the whole project. If I mute the first slide, the audio is on again on the next slide. My mute/unmute setting doesn't go to the next slide.
Any one have a solution to this problem? Any help or tips are greatly appreciated.

Hi there
Did you pay close attention to step 4?
Click image to see larger...
Addtionally, your post reads as if you feel the mute button is only avaliable with the Default playback control set. Note that there are all sorts of options with the supplied playback controls that offer enabling a mute button.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HTML5 video un-mute button?

It's easy to insert HTML5 video on a Web page with Dreamweaver CS6/CC, and it is easy to mute that video. Just click the "muted" button in the properties panel.
The code goes from:
<video preload="auto" controls loop >
            <source src="ShutterSpeed640.mp4" type="video/mp4">
        </video>
To:
<video preload="auto" controls muted loop >
            <source src="ShutterSpeed640.mp4" type="video/mp4">
        </video>
But what I would like to do is have the page load muted, then have a way for the viewer to un-mute the video.
I've been poking around the forum & tutorials & haven't found an answer. Could anyone set me on the right path?
I'm not a whiz at coding, I just poke around at it when something is not working in Design View, and over the years end up backing into a little knowledge. Maybe just enough to make me dangerous . . . to myself.
Thanks,
JAF

Um . . . yeah.
I so often have a tendency to look for complicated solutions when the answer is right in front of my face.
With the muted option clicked the window opens muted, then the viewer can click the speaker button on the playbar to unmute it. All I have to do is include a little text to inform the viewer of that possibility.
Thanks, John.
JAF

HT4085 My volume control indicates headphones not speaker. No sound from iPad. Have checked the mute button is off and button is set to operate lock rotation. Any suggestions?

The iPad sound is not working and the volume control shows headphones rather than speaker. Mute is off and I cannot see any reference to headphone/speaker settings or switch. Any suggestions ?

Most likely something is stuck in the headphone jack. Try to vacuum it out or CAREFULLY use a straightened paperclip to remove any dust or lint. You can also try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.

I cannot hear anything from radio (wqxr) - mute button is off. Anyone know how to turn sound on?

Ipad air - new - cannot hear music (eg. WQXR) - mute is off and I do get tones when mail comes it etc.
What to do? Thanks,
Katynaples

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

No sound when watching videos, you tube, etc. mute button seems to be off, volume up high. ideas? solutions? thanks

My macbook pro doesn't make any sound when I'm watching you tube or some other videos. The mute button seems off, volume up at the maximum level. Any ideas or suggestions? Thanks

lf you have only one mini conector, look in and see if there a red light on, if so take toothpick and insert it in the hole and GENTLY wiggle it around, there is a normalling switch tnat converts the signal from analog to digital

Mute button default state

Hi all,
how to set the FLV Playback Custom UI's mute button to
default state to "OFF"?
Any ideas?

In case I don't come back:
AS2:
Drag the component on stage, double click to get inside.
Create a new layer and open up the actions panel, add this:
off_mc.swapDepths(on_mc);
AS3:
Drag the component on stage, click it once and give it an
instance name of, mute_btn, create a new layer and open the actions
panel, add this:
mute_btn.setChildIndex(mute_btn.getChildAt(1), 0);
**Notice Difference**
AS2 you go into the component to add the actions, and the
instance names are already there by default. AS3 you need to give
the component an instance name, and don't go into the component,
put that script on the main stage.

I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

the mute button is a switch you need to flip, not touch. if you look at it and see color, its on.

Creating a mute button for video in as3

I would like to create my own mute button in as3. I have created a video object which plays my video fine. I'm having trouble finding information on how to create a mute button that mutes the audio but the video continues to play. All documentation that I've read relates to controlling sound from an loaded .mp3 file. Does anyone know how I can do this? The gotoandlearn.com site explains it using as2 only.
Thanks

I figured it out:
sound_mc.addEventListener(MouseEvent.CLICK, soundOFF);
function soundOFF(e:MouseEvent) {
     var transform:SoundTransform = new SoundTransform();
     transform.volume = 0;
     stream.soundTransform = transform;
Thanks for all your help on this. You'll probably see more of my post as I struggle with AS3 and my flash project.

[svn:osmf:] 13116: Making the control bar's 'stop' button optional ( and toggled off by default).

Revision: 13116
Revision: 13116
Author:   [email protected]
Date:     2009-12-21 04:50:52 -0800 (Mon, 21 Dec 2009)
Log Message:
Making the control bar's 'stop' button optional (and toggled off by default).
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/html-template/index.template.html
    osmf/trunk/apps/samples/framework/WebPlayer/src/Configuration.as
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Mute button for video.

I am using this code:
var vid=sym.$("Holder");vid.html('<video width="444" height="250" src="video/video4.mp4" type="video/mp4" controls ="controls" autoplay ="autoplay" muted ="muted"</video>');
to bring a video in. What I want to do is turn the controls on and have mute button on the stage that will mute and unmute the video.

with edgehero.js its pretty easy to do with class mute_videolink
Edgehero.com

IPad 2 Mute button does not mute youTube videos or games

I noticed iPad mute button does not mute youTube videos or games. When the button is set to mute, videos or games have their own sound so I have to adjust it manually only after I can hear the sound.
Any suggestions on how to mute all sounds at once?

Muting is meant to mute the system sounds like the phone ring and text message notification, it won't mute music or video or games. Use the volume control to turn the audio down.

HT3939 My iphone 4S has mute activated. It will not un-mute by taping the mute button or when I turn the phone off then back on.

Unmute not working model 4S
My iphone 4S has mute activated. It will not un-mute by taping the mute button or when I turn the phone off then back on.

Hi Lukeohiggins,
If you are having issues with your iPhone unexpectely powering off, you may want to try the troubleshooting listed under Power/Battery > Will not turn on, will not turn on unless connected to power, or unexpected power off in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
- Brenden

Mute button help - does not mute video playing (CP8)

Hi, I have a video playing on one slide and tested out the mute button on the player, sadly the button does not mute out the video. Is there any workaround to this? Thank you.

Hello,
Welcome to Adobe Forums.
Are you working on a MAC or Windows ?
Is that an Event Video or Multi-Slide Synchronized Video ?
Are you publishing SWF or HTML5 ?
HTML5 output generates a different play bar for Videos, it does not use Skin provided by Captivate.
For Captivate 8 published HTML, you need to use the mute button on that video.
Note : No issue with Captivate 8 published SWF, mute button does mute out the video
Thanks,
Vikram Gaur
Adobe Support

Video Component Mute Button to Off by Default

Similar Messages

Maybe you are looking for