Video Issues with Surface Pro 3 9926 .4079 Driver

I am thinking that most of us are aware, but I wanted to bring some visability to the graphics issues for the Surface Pro 3 and the 9926 update. If you are doing an upgrade then you will eventually end up with version x.4079 of the Intel Graphics driver.
If you are performing a clean install, be ready as the screen will flicker and boot loop every few minutes, but if you can get to Windows update and get the 1/22/2015 firmware update this is the x.4079 driver.
Issue are:
1. Internet Explorer is not able to play most embedded videos such as YouTube etc. The Bing homepage today keeps crashing for me.
2. .MP4 video will not play in the Video app or Windows Media Player. Work around - use the Chrome Browser and play the videos right in the window or convert to .avi or .mkv
I have seen lots of people posting that they uninstalled and deleted the drivers and then the standard video card driver would install. This is true but if you use the docking station or an external adapter then the external screen will not work AND
your machine will keep on trying to update the driver to the broken Intel one.
At this point we will have to wait for Microsoft to issue an updated Intel driver as I cannot seem to get the most current x.4080 to install (even when installing manually by having disk).
A.

Hi,
According to statistics recently, this seems like a commen issue as other people also encounter display problem after install Windows 10 preview 9926.
Please make sure Windows update work properly ane install all accessable updates.
Roger Lu
TechNet Community Support

Similar Messages

Having issues with Surface Pro 3 downloading boot image over PXE

Hi,
We've recently started to buy the new Surface Pro 3 with the new USB 3.0 Gigabit Ethernet adapter and we have some issues deploying them through SCCM. Basically, with the Pro 2 and Fast Ethernet adapter we have no issue at all, of course the deployment is
a bit longer than on any other computer, but it is still quite faster than the latest Surface.
We have the new 8.13.414.2014 driver injected in the Win 8.1 boot image for the USB 3.0 Gigabit adapter and all the drivers assigned to the new Surface in SCCM.
The problem occurs when we try to load the boot image after choosing PXE, it takes more than an hour to load it when it shouldn't take more than 5 minutes.
I tried rolling back to the old driver (8.6.128.2013) and use the Fast Ethernet adapter, use the Fast Ethernet adapter with the new driver and use the new adapter with the old driver, but it's still slow in any case, so
I'm pretty sure it has something to do with the new Surface and not the Ethernet adapter.
Anyone have an idea what could be the problem here? Anyone having issues with Surface Pro 3 and SCCM 2012?

I would imagine you have upgraded to R2, have you also applied KB2905002.
This hasn't got anything to do with the TFTP loading phase of the boot image.
Similar thread to this can be found here:
http://social.technet.microsoft.com/Forums/en-US/a6d80714-dc26-43db-a071-93eaee267122/surface-pro-2-surface-ethernet-adapter-super-slow-pxe?forum=configmanagergeneral
I already asked in that thread the same question, but how about normal PCs that are connected to the same network segment as the Surface devices, do they boot slow also?

Video issues with macbook pro

My 1 year old MacBook Pro has suddenly developed issues with playing all videos. They are very slow and stop constantly making viewing almost impossible. I have downloaded Flash player again but no help. I have strong internet via cable.

I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

Reader 9.1 issues with Surface Pro 3 (Windows 8)

The same multi document pdf opens with Windows 7 and Reader 9.1 DC. On the Surface Pro it appears to load correctly, but cannot get the images of the documents to expand to normal size, all I can see are the miniature images of the documents and the title. I can use touch to move between different document images,, but cannot get any of the documents to expand. I have installed and reinstalled Reader.

Adobe Reader and Adobe Reader Touch (for Windows 8) are two different apps. So I need to know if you use the standard Reader, or Reader Touch.
Reader Touch also looks a bit different from the standard Reader; see http://apps.microsoft.com/windows/en-us/app/adobe-reader-touch/162a2931-8ee6-4a56-9570-532 82525d7a3
Anyway, I think your Surface Pro is kind of a mobile device, so I will move your post.
[topic moved to Reader/Acrobat DC for mobile]

Issues with Flash Pro CS5 on Mac

Hi,
I recently bought a MacBookPro 15", 2.4 GHz Intel Core i5, 4GB 1067 MHz DDR3 and CS5 Creative Suite. Built in Intel HD Graphics and NVIDIA GeForce GT 330M.
Hi have some issues with Flash Pro:
- when objects on the stage are quite big (for example a 800x3000 movie clip), it start showing strange colors and wrong position, however when double clicking the movie clip to edit it, it looks correct. Also no problem when publishing. See images attached, the first one is correct, the second one shows the problem, when editing the mc in the 2nd image i get the third image that is correct.
Correct:
Wrong:
After entering editing mode:
- after a while, when making a change in the stage or in the time line (deleting frames for example), it doesn't show it immediately, but i need to refresh the page. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
- after a while it doesn't show when selecting an object, the object looks like is not selected, however i can see that it is in the properties panel. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
Hi have been using CS3 and CS4 with less powerful computers before (always mac) and i never encountered these issues.
Removing preferences and Application support files didn't help. I also updated Flash to v. 11.0.1, but no joy.
Does anyone know what's the problem?
Thanks a lot.
Mike

Based on some searching and testing, it seems that if you redirect ~/Library/Application Support/Adobe/Flash CS5 to a location on the local hard drive, rather than the network account storage, the problem ceases.
I hope this helps anyone else who may run into this problem.
Take care,
Branden

Major Issues with Premiere Pro CC

I am currently having some major issues with Premiere Pro CC running on my macbook pro(specs below).
I am trying to export a 4 minute video using the vimeo 1080p export settings as I usually do, and it takes about 10 hours to export the video. On cs6, a similar project would take 5-10 minutes.
Also, the video that was exported contained a lot of clips that came out choppy and low quality.
I am currently on the phone with tech support, and they cannot seem to figure out what is wrong.
I have seen a few post about CC having issues with amd cards, but nothing has been confirmed yet.
Any help would be greatly appreciated since this job is past due due to these issues.
2011 MacBook Pro
i7 2.2
16GB Ram
256 SSD + 750GB HD
AMD Radeon HD 6750M 1GB

You neglected to specify exactly which release of PPro CC you are running. There have been 5 of them.
If you're on CC7.2 or 7.2.1, then you may be hitting the same problem discussed in one of these threads:
RGB Curves: http://forums.adobe.com/message/5929088?tstart=0#5929088
http://forums.adobe.com/message/5934916?tstart=30#5934916
http://forums.adobe.com/message/5935386?tstart=0#5935386
The first thing to try is switching Renderer to Software Only.

Graphics Card issues with Premiere Pro CS4

Hey there,
I've placed the screenshot of my problem at the bottom of this post.
I'm having lots of issues with premiere pro CS4 and editing videos since I upgraded to Windows 7. I have some .mpg and .MP4 videos. Both of which play fine in WMP, VLC, WinAmp, VirtualDJ etc. But when I load them into PPRO CS4, as you can see in the screenshot they go green and pink. And they don't move. I.e you see one still image and hear only audio.
Now a fix I have found for this is to uninstall my graphics card. But this is no way an option to edit videos, as the resoultion goes from 1920 x 1080 to 1024 x 768.
I should add that I am runnig the following system:
Dell Vostro 1000 Latpop
Windows 7 Ultimate 32Bit
2.00Ghz AMD Sempron Processor
2GB RAM
ATI Radeon XPress 1150 Graphics card
I have the latest graphics card drivers installed. I am just wondering what the problem is, and a potential fix. Would be great to hear any advice,
Regards,
Adam.

OK, here are some other things to think about:
ATI/AMD Catalyst seems to have an issue with one of the latest versions, maybe rollback to an earlier version.
Depending on your OS, check Hardware Acceleration (though this usually affect smoothness of playback) in Control Panel>System>Hardware>Advanced.
Check your OpenGL settings.
In Catalyst, turn OFF any GPU Acceleration
That's about all that I can think of for now, and those are shots in the dark.
Good luck,
Hunt

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Reporting an audio/video issue with a TV show from a Season Pass? How?

I would like to report some audio/video issues with the latest The Unit and The Seeker episodes but I can't find them in my Purchase History??? I own a Season Pass for both. Any idea how to do it? I'm lost. Thanks!

Is this the lack of audio on "Shadow Riders"? I've just got to that episode, and I tried to report the problem, but the whole series of hoops you have to jump through seems to have changed. Rather than get to the page where you add comments for the problems, it merely sends you to an internet link on apple that has no bearing on the problem.
If you open your account information (store > View my account) you can click your purchase history there. The theory is that you find your program, click the arrow next to it, then click "report a problem" and it should allow you to enter a comment, or the problem... Anyone else having this troubvle?

Video Issues with Boot Camp / WinXP Pro

I have a MacPro 2.66, Radeon X1900 with a 23" Cinema HD Display.
The problem I'm running in to was the same one I first experienced when installing XP Pro. No video. There was a video signal to the 23" display, but I got nothing other than a black screen.
I found a solution to use a different monitor, as apparently there are some "issues" with Boot Camp and/or XP Pro and the 23" display.
The install of XP Pro went fine on a different (smaller) monitor. It's the post-install that is not working.
I got XP to boot up once or twice and all seemed to be fine.
Now, when I boot back up in to XP Pro, I get a video signal and can hear XP boot up (Nice cozy XP startup music), but I only get a black monitor screen. No video whatsoever. No posting, no nothing.
Granted, I have not done it yet, but I'm sure I can slap on the smaller tube and get XP to boot.
I'm suspecting a video driver issue with the Radeon X1900 and the 23" display, but was wondering if anyone else had experienced this problem and what the solution might be?
I'm probably going to have to wait to see if Boot Camp 1.2 fixes this issue....seeing how there is already an sata issue that needs to be addressed as well.
Any thoughts?
Michael

Well, I'm not sure what one should do if another display isn't available. But, I was lucky to have an old 17" Cinema to use instead of the 23" to install drivers with the X1900 card installed.
I went here...
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folder ID=293
... and downloaded their Catalyst Control Center, installed it, and went to "Advanced" to do display discovery. Then I did a full shutdown and restart.
The 23" works now. Though, as others have said, it's black until just before the XP desktop loads (as I assume the drivers load with the desktop).
Aside from it being a pain to get working on XP, the card screams (on both platforms)! There is a slight bit of fan noise which is pretty subtle and only seems to rev on startup/self-test but so far it's definitely worth it. I didn't think it'd be observable outside of 3D apps but with Mac OS GPU acceleration even Tiger seems faster!

Video display issues with Mac Pro and GeForce 7300?

I'm just wondering whether anyone else has experienced any video strangeness with their Mac Pros with GeForce 7300 cards? Basically, twice now I've had the mouse cursor stop responding and the entire screen turn black, then a second later everything's back to normal (with the cursor moving and the display back). I seem to recall a similar issue on my Windows PC with a Quadro FX 1100 card, so I'm hoping it's just a video driver issue.
Bryan

I am not sure if its the monitor, the MP, or the video card, but, I have had my computer completely replaced after reporting to my local Apple Store about my G5 fans over heating and my monitor either not being able to wake or refusing to sleep. I called AppleCare and did all the normal trouble shooting but they said take it in to store. But now that I have a brand new MP 3.0 I am getting the same issue but no fan noise. I have a 23Cinima HD (the strore said it was fine when they had both my computer and monitor in) but last night after hours of inactivity the monitor had the screen saver on but didn't got to sleep. I then put in to sleep but when I got up this morning I couldn't wake it up. When I got my new computer (3 days ago) I didn't migraite any of my old stuff. I have been slowly reinstalling all my software and updated anything before I install anything else as an added attempt to not have any bad files. I have 2 gig of ram and 500 hd with the 7300 card. I am at a lost I checked and rechecked all my setting. The only other thing I have connected is my airport extreme base.
Any idea's anyone?
Ops one last issue, I have blown my apartment circut breaker three time while attempting to start the new PM and once it did it when I was trying to wake it just by tapping the space bar. Is it the computer being more power hunger?
Mac OS X (10.4.8)

New NVIDIA Driver issue with Premiere pro

Laptop
Windows 7 pro x64
Intel Core i7 2.7ghz
16 gig ram
NVIDIA GTX675MX driver version 314.07 2013.2.18
Hello, I had to update the driver due to premiere stating I had an outdated driver. After installation everything seemed fine however today when I opened premiere my source and preview windows showed black, no video. My edits and source files were all still there. Sound from my clips played but no video. I have Mercury playback set to hardware. When I switch it to software the video images return. Has anyone else had an issue with this driver in Premiere pro and did you find a solution? I did a search and this seems to be an issue with drivers. Hope they fix it in the next update. Thanks.

Thank you everyone, I just figured it out. For some reason in my NVIDIA Control panel-Manage 3d settings-Global settings Preferred Graphics processor drop down was set to Auto-Select. I switched it to the NVIDIA card and everything seems back to normal. Phew!
Harm, I used your system configuration guide to set up my system. That really helped take the confusion out of proper system configuration. Thank you for writing that.

External Hard Drive Compatibility with Surface Pro 3

what external hard drive will work with the surface pro 3

as per suggestion from this site, I suggest you thinking about another option like OneDrive (cloud storage), USB drives (pen drive), and microSD cards
https://www.microsoft.com/surface/en-us/support/storage-files-and-folders/surface-storage-options
this is the tips to free up your disk space
http://windows.microsoft.com/en-us/windows-8/free-up-disk-space
I suggest use external HDD which using less power (external HDD mobile) or powered external HDD, since Surface only have 900ma (4.5v)

Internal hard drive issue with Mac Pro

I work for two office that share information through a VPN. Each office has one Mac Pro being used as a server for data storage. The Pros have four internal hard drives (1TB each).
Hard drives in the Pro for OFFICE 1 were configured like so:
HD1 - OS/Boot drive
HD2 - Time Machine backup of HD1/DATA1/DATA2
DATA1 - Data storage
DATA2 - Data storage
Three weeks ago: Time Machine could not find HD2 and could not backup. I rebooted the machine and HD2 reappeared. However, after the reboot, DATA1 did not mount. I was unable to find DATA1 in Disk Utility. However, the drive could be accessed by all other Macs on the network. This machine was taken to the local Apple Store and we were told that HD2 was a bad drive and need to be replaced. We opted not to replaced the drive at this time and turned Time Machine backups off. We haven't had any problems with DATA1 since. (NOTE: During the weeks prior, the client machines intermittently lost connection with DATA1 and would have to reconnect)
Last week: OFFICE 2 - Mac Pro hard drives configured the same as OFFICE 1; however, HD2 was not used for TM backups. TM was turned on and set to backup HD1/DATA1/DATA2 to HD2 (exactly like OFFICE 1). The next day, TM could not find HD2 and backups stopped running. I rebooted the machine, HD2 reappeared, but we did not restart the TM backups.
Today: OFFICE 2 client machines have experienced intermittent disconnecting of DATA1.
I wasn't extremely concerned with the situation at OFFICE 1 as these Pros are almost five years old and in constant use. We plan on purchasing an external drive for the TM backups. HOWEVER, with a similar situation now being experienced in OFFICE 2, I am perplexed.
Could both machine be experiencing hard drive failures weeks apart? They were both purchased and installed at the same time.
Is there a known issue with TM and internal drives?
One difference between the two machines: OFFICE 1 is running OS X 10.8.5; OFFICE 2 runs 10.6.8
Any suggestions/help is appreciated. Thanks!

Relying on TimeMachine has some issues, along with only having one, I use at least two swapping TimeMachine so that they rotate AND I clone every drive (volume actually) so I can swap drives if need be, especially useful for t he system but good for any drive.
Power issues in t he buildings?
There are some programs that will scan for and report and./or attempt to reassign a failing sector ("fail" is qualitative, is 10 write failures a fail? then the 9th is not but it is a "weak sector.") Some run in the background.
Mirror can be 2 or 3 ( I prefer 3, that way if one fails I STILL have a mirror array in place) where any failure is not acceptable, AND where the array data is backed up usually - less important when using a three-drive configurations.
How old, when last initialized (zero), and is it showing spare blocks being used? that last is the most indicative of failed drive.
Rare but a bad SATA cable or power (seeing how the cables are tucked away) is only way generally for multiple failures in same drive bay or computer. Note: early on in 2006-7 there were reports of some customers having motherboard and trouble with a drive bay , and t he problems showed up early.
Often though it is NVRAM or SMC related issue trigged by something else, a USB cable or device that is faulty, even a PCIe controller that is the culprit. And replacing cable, keyboard, device, and resetting SMC and NVRAM (often NVRAM needed to be done multiple times, but never keep resetting SMC) - unplugged and when you connect back up, do not install anything other than system, keyboard and mouse and see if that helps.
With a drive, likely the drive in 85% or more, is fine, but the directory is not, or it needs to be erased to rebuild all the system partitions.
1TB is small for TimeMachine. 350% of the amount of data, and always have free space for a full backup set of all the data. T.M. will try and prefers to automatically backup any and everything plugged in and connected, rather than my preference which is ASK FIRST to add a drive to TM backup set, otherwise leave it out. 600GB of data and system would mean 2.5TB drive, maybe 2TB minimum.

Using Video CAMERA with Connect pro

We reciently purchased this product and were told that it
would work with video cameras. We have a Panasonic that we are
using with vista. this camera works with Premiere Pro, and there is
nothing wrong with it. I know that Connect is not software based it
is an Internet Application. How ever i know that the OS (vista)
"sees" the camera because it works with other programs. Sorry i am
connecting with IEEE not USB
Has anyone out there in the world has success with getting a
video camera using IEEE connection to work fully. Audio and Video
coming through the camera?
Is anyon aware of drivers for either the camera or the IEEE?
And if the Connect product does not support this... WTF?
thanks

Connect does work with IEEE1394 Firewire Cams, just not with
all Firewire Cams. (USB cams also are not all working).
I would suggest to first try out the cam from different
machines with different OSs (Vista might well be the sole issue
here), also try if you can get an ordinary USB cam to work.
If all fails, you can workaround that using a virtual camera
driver, piping the firewire cam into the virtual cam and in Connect
you can load the virtual cam with the image of the Firewire cam.
Not a nice way round, but it would work.
If you google for "Adobe Connect camera compatibility matrix"
you get a "slightly" outdated list of supported cameras.

Video Issues with Surface Pro 3 9926 .4079 Driver

Similar Messages

Maybe you are looking for