View nesting level exceeded (limit 32)
Hi,
I have just added an additional level in my main hierarchy and on processing the AccountL dimension I get the below error:
- Error while update members of multiple hierarchy of AccountL
- Maximum stored procedure, function, trigger, or view nesting level exceeded (limit32)
I counted the level that I am inserted and it is only 7, is it possible that my alternate hierarchy levels are added to the main hierarchy levels? I have not included another level on any of the other hierarchies - only my first one.
Kind Regards,
Fiona
Hi,
I have seen a similar issue before. In order to find where are these errors and correct them I suggest
you to validate and process the three hierarchies one by one, putting each hierachy as the first one by renaming the PARENTHx column header. In this way, when all the hierarchies can be validated stand-alone, then you can validate them together. a possible error can be: have the name of memebers same as the name of father.
You can also try to delete the last member you added and reprocess, just to understand if the error is related to this new member or to something else.
Hope this can help you,
Mihaela
Similar Messages
-
Revision: 20451
Revision: 20451
Author: [email protected]
Date: 2011-02-24 08:33:31 -0800 (Thu, 24 Feb 2011)
Log Message:
backporting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-570
http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
blazeds/branches/4.0.0_fixes/modules/common/src/flex/messaging/errors.properties
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/SerializationContext.java
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf0Input.java
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf3Input.java
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.javaDear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav -
Revision: 20443
Revision: 20443
Author: [email protected]
Date: 2011-02-23 21:19:22 -0800 (Wed, 23 Feb 2011)
Log Message:
back porting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-570
http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
blazeds/branches/3.x/modules/common/src/java/flex/messaging/errors.properties
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/SerializationContext.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf0Input.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf3Input.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/AmfIO.java -
[BlazeDS]Error serialization exceeds the max collection object nest level of '15'.
I am getting the following error when I try to import large data from server to client. I am not able to find where I can change the settings to handle more data.
[BlazeDS]Error serialization exceeds the max collection object nest level of '15'.
flex.messaging.io.SerializationException: Error serialization exceeds the max collection object nest level of '15'.
at flex.messaging.io.amf.AmfIO.increaseNestCollectionLevel(AmfIO.java:142)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:753)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)I am getting the following error when I try to import large data from server to client. I am not able to find where I can change the settings to handle more data.
[BlazeDS]Error serialization exceeds the max collection object nest level of '15'.
flex.messaging.io.SerializationException: Error serialization exceeds the max collection object nest level of '15'.
at flex.messaging.io.amf.AmfIO.increaseNestCollectionLevel(AmfIO.java:142)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:753)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754) -
ORA-19566: exceeded limit of 0 corrupt blocks
Hi All,
We have been encountering some issues with RMAN backup; it has been erroring out with same errors (max corrupt blocks). As of now, I ran the db verify for affected files and found that indexes are failing. When I tried to find out the indexes from extent views, I was unable to find it. Looks like these blocks are in free space as I found it and also the V$backup corruption view shows the logical corruption.
Waiting for you suggestion....
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for HPUX: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
RMAN LOG:
channel a3: starting piece 1 at 14-DEC-09
RMAN-03009: failure of backup command on a2 channel at 12/14/2009 05:43:42
ORA-19566: exceeded limit of 0 corrupt blocks for file /ub834/oradata/TERP/applsysd142.dbf
continuing other job steps, job failed will not be re-run
channel a2: starting incremental level 0 datafile backupset
channel a2: specifying datafile(s) in backupset
including current control file in backupset
channel a2: starting piece 1 at 14-DEC-09
channel a1: finished piece 1 at 14-DEC-09
piece handle=TERP_1769708180_level0_292_1_1_20091213065437.rmn tag=TAG20091213T065459 comment=API Version 2.0,MMS Version 5.0.0.0
channel a1: backup set complete, elapsed time: 01:14:45
channel a2: finished piece 1 at 14-DEC-09
piece handle=TERP_1769708180_level0_296_1_1_20091213065437.rmn tag=TAG20091213T065459 comment=API Version 2.0,MMS Version 5.0.0.0
channel a2: backup set complete, elapsed time: 00:24:54
RMAN-03009: failure of backup command on a4 channel at 12/14/2009 06:14:33
ORA-19566: exceeded limit of 0 corrupt blocks for file /ub834/oradata/TERP/applsysd143.dbf
continuing other job steps, job failed will not be re-run
released channel: a1
released channel: a2
released channel: a3
released channel: a4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on a3 channel at 12/14/2009 06:41:00
ORA-19566: exceeded limit of 0 corrupt blocks for file /ub806/oradata/TERP/icxd01.dbf
Recovery Manager complete.
Thanks,
Vimlendu
Edited by: Vimlendu on Dec 20, 2009 10:27 AMdbv file=/ora/oradata/binadb/RAT_TRANS_IDX01.dbf blocksize=8192
The result:
DBVERIFY: Release 10.2.0.3.0 - Production on Thu Nov 20 11:14:01 2003
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE =
/ora/oradata/binadb/RAT_TRANS_IDX01.dbf
Block Checking: DBA = 75520968, Block Type = KTB-managed data block
**** row 80: key out of order
---- end index block validation
Page 23496 failed with check code 6401
DBVERIFY - Verification complete
Total Pages Examined : 34560
Total Pages Processed (Data) : 1
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 31084
Total Pages Failing (Index): 1
Total Pages Processed (Other): 191
Total Pages Empty : 3284
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
Seems like I have 1 page failing. I try to run this script:
select segment_type, segment_name, owner
from sys.dba_extents
where file_id = 18 and 23496 between block_id
and block_id + blocks - 1;
No rows returned.
Then, I try to run this script:
Select tablespace_name, file_id, block_id, bytes
from dba_free_space
where file_id = 18
and 23496 between block_id and block_id + blocks - 1
Resulting 1 row.
Seems like I have the possible corrupt block on unused space.
Edited by: Vimlendu on Dec 20, 2009 2:30 PM
Edited by: Vimlendu on Dec 20, 2009 2:41 PM -
[svn:bz-trunk] 20609: Change the default max object nest level from 1024 to 512.
Revision: 20609
Revision: 20609
Author: [email protected]
Date: 2011-03-04 10:23:41 -0800 (Fri, 04 Mar 2011)
Log Message:
Change the default max object nest level from 1024 to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Update documentation for the max object nest level setting to reflect the new default.
Add documentation for the new max collection nest level setting.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
blazeds/trunk/resources/config/services-config.xmlYou should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package. -
I've had an error message: Message content exceeds limit while trying to send a 2mb video by mms. What am I doing wrong? I've sent them before and they've gone thru. HELP Please!
Solved!
Go to Solution.Hi and Welcome to the Forums!
Since MMS is a voice-level service from your carrier, you should contact them for assistance.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
FullOffline Backup - ORA-19566: exceeded limit of 0 corrupt blocks for file
Dear SAP gurus,
I am getting an error from the DBA Planning Calendar every time the job for "Full Offline backup" is run. And it is always as you can see from the log on the same file "oracle/SHD/sapdata4/sr3_16/sr3.data16".
The oracle error is the following:
ORA-19566: exceeded limit of 0 corrupt blocks for file /oracle/SHD/sapdata4/sr3_16/sr3.data16
I found the SAP Note 969192 - RMAN Backup of SYSTEM tablespace terminates with ORA-19566
but it does no apply because this is for the tablespace SYSTEM and not PSAPSR3.
Please find below the log:
BR0051I BRBACKUP 7.00 (46)
BR0055I Start of database backup: begomwsv.ffd 2011-08-17 10.01.37
BR0484I BRBACKUP log file: /oracle/SHD/sapbackup/begomwsv.ffd
BR0477I Oracle pfile /oracle/SHD/102_64/dbs/initSHD.ora created from spfile /oracle/SHD/102_64/dbs/spfileSHD.ora
BR0101I Parameters
Name Value
oracle_sid SHD
oracle_home /oracle/SHD/102_64
oracle_profile /oracle/SHD/102_64/dbs/initSHD.ora
sapdata_home /oracle/SHD
sap_profile /oracle/SHD/102_64/dbs/initSHD.sap
backup_mode FULL
backup_type offline_force
backup_dev_type disk
backup_root_dir /mnt/backup/oracle/SHD
compress no
disk_copy_cmd rman
cpio_disk_flags -pdcu
exec_parallel 0
rman_compress no
system_info shdadm/orashd eccdev01 Linux 2.6.16.60-0.87.1-smp #1 SMP Wed May 11 11:48:12 UTC 2011 x86_64
oracle_info SHD 10.2.0.4.0 8192 17654 1114483454 eccdev01 UTF8 UTF8
sap_info 700 SAPSR3 0002LK0003SHD0011Y01548735220015Maintenance_ORA
make_info linuxx86_64 OCI_102 Jan 29 2010
command_line brbackup -u / -jid FLLOF20110817100136 -c force -t offline_force -m full -p initSHD.sap
BR0116I ARCHIVE LOG LIST before backup for database instance SHD
Parameter Value
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination /oracle/SHD/oraarch/SHDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 17651
Next log sequence to archive 17654
Current log sequence 17654 SCN: 1114483454
Database block size 8192 Thread: 1
Current system change number 1114501246 ResetId: 664011854
BR0118I Tablespaces and data files
BR0202I Saving /oracle/SHD/sapdata3/sr3_15/sr3.data15
BR0203I to /mnt/backup/oracle/SHD/begomwsv/sr3.data15 ...
#FILE..... /oracle/SHD/sapdata3/sr3_15/sr3.data15
#SAVED.... /mnt/backup/oracle/SHD/begomwsv/sr3.data15 #1/15
BR0280I BRBACKUP time stamp: 2011-08-17 10.28.42
BR0063I 15 of 48 files processed - 44100.117 of 121180.346 MB done
BR0204I Percentage done: 36.39%, estimated end time: 11:15
BR0001I ******************________________________________
BR0202I Saving /oracle/SHD/sapdata4/sr3_16/sr3.data16
BR0203I to /mnt/backup/oracle/SHD/begomwsv/sr3.data16 ...
BR0278E Command output of 'SHELL=/bin/sh /oracle/SHD/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Aug 17 10:28:42 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: SHD (DBID=1683093070, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: dsk
channel dsk: sid=223 devtype=DISK
executing command: SET NOCFAU
Starting backup at 17-AUG-11
channel dsk: starting datafile copy
input datafile fno=00019 name=/oracle/SHD/sapdata4/sr3_16/sr3.data16
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dsk channel at 08/17/2011 10:30:30
ORA-19566: exceeded limit of 0 corrupt blocks for file /oracle/SHD/sapdata4/sr3_16/sr3.data16
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.30
BR0279E Return code from 'SHELL=/bin/sh /oracle/SHD/102_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance SHD failed
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.30
BR0506E Full database backup (level 0) using RMAN failed
BR0222E Copying /oracle/SHD/sapdata4/sr3_16/sr3.data16 to/from /mnt/backup/oracle/SHD/begomwsv failed due to previous errors
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0307I Shutting down database instance SHD ...
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0308I Shutdown of database instance SHD successful
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0304I Starting and opening database instance SHD ...
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.47
BR0305I Start and open of database instance SHD successful
Do you guys have any idea on how to solve this issue??
Thanks in advance, MarcHi,
I am getting an error from the DBA Planning Calendar every time the job ...
So when was your last successfull backup of this datafile. Check if still available.
If this is some time ago, and may be you are currently without any backup, try to backup without rman at once,
to have at least something to work with in case you get additional errors right now.
Then you need to find out what object is affected. You are on the right way already. You need the statement,
that goes to dba_extents to check what object the block belongs to.
Has the DB been recovered recently, so the block might possibly belong to an index created with nologging ?
(this could be the case on BW systems).
If the last good backup of that file is still available and the redologs belonging to this backup up to current time are as well, you could try to recover that file. But I'd do this only after a good backup without rman and by not destroying the original file.
If the last good backup was an rman backup, you can do a verify restore of that datafile in advance, to check if the corruption is really not inside the file to be restored.
Check out the -w (verify) option of brrestore first, to understand how it works.
(I am not sure it this is already available in version 7.00, may be you need to switch to 7.10 or 7.20)
brrestore -c -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -b xxxxxxxx.ffr -w only_rmv
You should do a dbv check of that file as well, to check if it gets more information. I.E if more blocks are
affected. rman stops right after the first corruption, but usually you have a couple of those in line, esp. if these are
zeroed ones. (This one would also work with version 7.00 brtools)
brbackup -c -u / -t online -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -w only_dbv
Good luck.
Volker -
[svn:bz-3.x] 20876: Change default max object nest level to 512.
Revision: 20876
Revision: 20876
Author: [email protected]
Date: 2011-03-16 09:02:36 -0700 (Wed, 16 Mar 2011)
Log Message:
Change default max object nest level to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Add documentation for the max object nest level setting.
Add documentation for the max collection nest level setting.
Checkintests: passed
Modified Paths:
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java
blazeds/branches/3.x/resources/config/services-config.xmlRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
[svn:bz-4.0.0_fixes] 20874: Change default max object nest level to 512.
Revision: 20874
Revision: 20874
Author: [email protected]
Date: 2011-03-16 06:55:37 -0700 (Wed, 16 Mar 2011)
Log Message:
Change default max object nest level to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Add documentation for the max object nest level setting.
Add documentation for the max collection nest level setting.
Remove max-string-length-bytes setting from the example services-config.xml as this setting doesn't exist.
Checkintests: passed
Modified Paths:
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
blazeds/branches/4.0.0_fixes/resources/config/services-config.xmlRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Max nested levels reached on object sent with RemoteObject
Hello:
We have an application that uses RemoteObject connections (with AMFPHP) to send an custom class object to PHP. This object has multiple depth levels, with nested objects inside the main one. We noticed that once a particular level is reached, the RemoteObject serialization crashes throwing this error:
TypeError: Error #1034: Type Coercion failed: cannot convert Object@7e30f89 en mx.messaging.messages.IMessage.
We tried to send a lighter object, with no properties, just the nested levels. The same occurs. In example:
var params:Object = {};
params['test'] = {0:{1:{2:{3:{4:{5:{6:{7:{8:{9:{10:{11:{12:{13:{14:{15:{16:{17:{18:{19:{20:{21:{22:{}}}}}}}}}}}}}}}}}}}}}}}};
remoteObject.runService(params);
If the object has less levels, it works:
params['test'] = {0:{1:{2:{3:{4:{5:{6:{7:{8:{9:{10:{11:{12:{13:{14:{15:{16:{17:{18:{19:{20:{21:{}}}}}}}}}}}}}}}}}}}}}}};
So it seems that the RemoteObject has a depth limit of 24 levels? Maybe 23, I´m not sure. Sending in JSON is not an option, as I lose all the typed classes and objects inside the main object.
Can anyone provide a good approach to face this problem??
Thanks in advance!Solved: http://stackoverflow.com/questions/22936444/max-nested-levels-reached-on-object-sent-with- remoteobject
-
My iTunes Match hasn't been working for a couple of days. It said I had exceeded the song limit, so I was going through my library and clearing out some songs. When I deleted the songs, the box that asked if I wanted to delete them from the cloud wasn't showing up. I decided to update my iTunes Match before deleting anything else. When I attempted the update, Step 1 moved incredibly slowly, then stopped working before reaching Step 2. When this has happened in the past, I have been advised to try several troubleshooting tactics from the support forum and from writing to Apple support in the past. The first one is to turn off iTunes Match, restart the computer, and turn on iTunes Match again. I did that. The same problem occurred. I tried the second trouble shooting tactic, which was to turn off iTunes Match, close iTunes, find the iTunes Library Genius.itdb and iTunes Library Extras.itdb and move them to the trash, then run a Repair Disk Permissions using Disk Utility, then turn iTunes Match back on. I tried that. The same problem occurred. I went to my iTunes library to see the iCloud status of my songs, and every single song was listed as not being in the cloud yet and had the "Exceeded Limit" status, even the songs that have been in my cloud for over a year. I checked a few of the forum topics here on the support site. One suggested opening up iTunes while holding down the Option button, creating a new library, then turning on iTunes Match and deleting songs from the cloud that way. Then open up the original library and turn on iTunes Match. I did that. The status of my songs hasn't changed, nor can iTunes Match load past Step 1. Does anyone know what I can do to fix this?
Maybe I didn't explain it properly, but that's one of the things I described trying in my first post. It helped get songs out of my cloud that I didn't need there, but iTunes Match still couldn't get past the first step. Last night I deleted the iTunes Library Extras.itdb, iTunes library Genius.itdb, iTunes Library.it, and iTunes Library.xml files from my computer, entered Time Machine, and recovered those same files that had been backed up after the last time I added music (the time the problem began.) After recovering those files I opened iTunes and turned Match back on. For some reason, it worked, even though those were the files that existed when the problem initially occurred.The combination of having songs removed from the cloud as well as restoring those original files must have done something, but I have no idea why that fixed the problem.
-
Is there a way to view frequency levels in Hz on Adobe Audition 3.0 during voice recordings?
Is there a way to view frequency levels in Hz on Adobe Audition 3.0 during voice recordings so I can ensure the recordings are hitting the specific frequency range I desire?
The frequency analyser pane can run in real time and show you this, but with a voice, there's no way you can alter the effective range anyway - it's almost entirely dependent on the voice you are recording, and they all fall pretty much into the same bands - depending on whether you're male or female.
-
Validation at View Object level and not Enity Object
How would you create validation logic at the view object level and not at the entity object level? I have many VOs that reference the same EO and want some validation logic to be applied only to certain VOs.
Thanks,
QuocMy use case for this is to perform form validation inputted by the user via a JSPX page.
-
How to put validation between attributes at View Object level in BC4J
Hi,
Is it possible in BC4J to put validation between attributes at View Object level?
I know that I can do it at Entity Object level in validateEntity method, but I have several View Objects connected with one Entity Object and don't want to have the same validation logic for all View Objects.
Thanks for any help!It returns errorWhat error does it return?
John
Maybe you are looking for
-
Server 2012 R2 STD RODC Installation Failure
Hello, I am running into issues installing a Windows Server 2012 R2 RODC, i have pre-created the RODC account, and set the proper delegation permissions. I have DNS configured properly and verified everything in DNS is good, i also verified the firew
-
iTune errors will be corrected by Microsoft in the RTM and Customer versions of Vista. RTM is out in many areas now and the Customer versions are out in 30 days. Until then, give this a try... 1 - Go to your VISTA Control Panel and get into Admin Ser
-
Ipod nano resets when I click on music, and exit podcasts.
As the subject say's, on my 4GB black, ipod nano when I click on the music tab it resets, bringing up the apple logo and goes back to the main menu. Same thing happens when I exit the podcasts menu, I can listen to a podcast but when I exit podcasts
-
Flash CS5 Pro/Flash Builder 4 Workflow
I'm new to using Flash Builder as an AS3 editor for Flash Pro projects. I've followed multiple tutorials on the workflow between the two but keep hitting a snag. For example: If I create a new FLA file, edit the document class and select Flash Build
-
Yes I am wondering how do you make a copy of the DVD's that came with our macbook pro's? When I had Tiger I put the DVD onto an external hard drive and I was able to boot from it and install Tiger if anything went wrong with my internal hard drive. W