View selecion problem in MM12 transaction

Hi,
In my bdc program I want to directly select 'Costing View1' in MM12 transaction.
Is there any function module available for this??
Please help me.
Regards,
Tintu

Hi Kevin,
Thanks for your response, I have exported and tried in other 12.0 &12.1system's too then also Transaction properties are not visible.
The transaction is not generating any warning message of failure, but the Transaction link editor window will be hanged once i click on that tab.(This hanging of window is done only for the transactions exported from 12.1 to 12.0)
Regards,
Sireesha.
Edited by: sireesha.g on Feb 3, 2011 8:34 PM
Edited by: sireesha.g on Feb 3, 2011 8:36 PM

Similar Messages

Problem with "Call Transaction" which calls a view cluster

Hi Colleagues ,
I have a rare issue with the call transaction , here is the use case for it :
1> I call a transaction(calls a screen X) in a report ,
2> I have a button in the screen , which calls another transaction(calls a screen X2) .
3> On the screen X2 i have another button which calls transaction (calls the view cluster ).
problem :
i'm not able to see the navigation pane in the view cluster on the left. its missing .
but when the view cluster is called direclty , i'm able to see the navigation pane in the view cluster ..
My initial doubt was , is this the problem with nesting of 'Call Transaction' calls ????
please answer the thread , i have to fix this ASAP.
regards,
Dilip

problem solved.

Meterlized view Refreshtime problem

Hi,
I have an issue with my MATERIALIZED view refreshment.
Server170 having schema "Afccv" with the table name " Tbl_voicechat".
Server 169 having a db link name "SERVICEDB1" point to same server.
MATERIALIZED view on server 169 DB user "smschat" with the following code ::
CREATE MATERIALIZED VIEW "SMSCHAT"."TBL_VOICECHAT_NEW1" TABLESPACE "SMSCHAT"
BUILD IMMEDIATE
REFRESH FAST
AS SELECT <COLUMNNAMES>
FROM AFCCV.TBL_VOICECHAT@SERVICEDB1;
Refreshment time is 15 min.
alter MATERIALIZED VIEW SMSCHAT.TBL_VOICECHAT_NEW1 REFRESH FAST ON DEMAND START WITH sysdate+0 NEXT sysdate+(15/86400*60);
Also there is 5 indexes on this MATERIALIZED view.
Problem is ::
Sometimes it is refreshing properly in time and taking approximate 5-8 min to refresh. But sometimes it seems to be like hang or when I m checking the job for refreshment its only showing runnning.
SQL> set time on
11:44:02 SQL> alter session set nls_Date_format='dd-mon-yyyy hh24:mi:ss';
Session altered.
11:44:03 SQL> select mview_name ,last_refresh_date from dba_mviews;
MVIEW_NAME LAST_REFRESH_DATE
MGMT_ECM_MD_ALL_TBL_COLUMNS 20-jan-2011 11:44:40
TBL_VOICECHAT_NEW1 07-jun-2012 09:44:54
11:44:33 SQL> select * from dba_jobs_running;
SID JOB FAILURES LAST_DATE LAST_SEC THIS_DATE THIS_SEC INSTANCE
2893 252 0 07-jun-2012 09:44:51 09:44:51 07-jun-2012 11:14:06 11:14:06 0
11:44:34 SQL>
Now What to do and why it is not refreshing properly. DB link is working fine. no network issue is there. no locking is there on db.
Kindly tell me where to check related to this issue. or what I can do for this.
thanks in Advnace
Pradeep.

Pradeep Sharma wrote:
Hi,
I have an issue with my MATERIALIZED view refreshment.
Server170 having schema "Afccv" with the table name " Tbl_voicechat".
Server 169 having a db link name "SERVICEDB1" point to same server.
MATERIALIZED view on server 169 DB user "smschat" with the following code ::
CREATE MATERIALIZED VIEW "SMSCHAT"."TBL_VOICECHAT_NEW1" TABLESPACE "SMSCHAT"
BUILD IMMEDIATE
REFRESH FAST
AS SELECT <COLUMNNAMES>
FROM AFCCV.TBL_VOICECHAT@SERVICEDB1;
Refreshment time is 15 min.
alter MATERIALIZED VIEW SMSCHAT.TBL_VOICECHAT_NEW1 REFRESH FAST ON DEMAND START WITH sysdate+0 NEXT sysdate+(15/86400*60);
Also there is 5 indexes on this MATERIALIZED view.
Problem is ::
Sometimes it is refreshing properly in time and taking approximate 5-8 min to refresh. But sometimes it seems to be like hang or when I m checking the job for refreshment its only showing runnning.
SQL> set time on
11:44:02 SQL> alter session set nls_Date_format='dd-mon-yyyy hh24:mi:ss';
Session altered.
11:44:03 SQL> select mview_name ,last_refresh_date from dba_mviews;
MVIEW_NAME LAST_REFRESH_DATE
MGMT_ECM_MD_ALL_TBL_COLUMNS 20-jan-2011 11:44:40
TBL_VOICECHAT_NEW1 07-jun-2012 09:44:54
11:44:33 SQL> select * from dba_jobs_running;
SID JOB FAILURES LAST_DATE LAST_SEC THIS_DATE THIS_SEC INSTANCE
2893 252 0 07-jun-2012 09:44:51 09:44:51 07-jun-2012 11:14:06 11:14:06 0
11:44:34 SQL>
Now What to do and why it is not refreshing properly. DB link is working fine. no network issue is there. no locking is there on db.
Kindly tell me where to check related to this issue. or what I can do for this.
thanks in Advnace
Pradeep.
>Hi,
I have an issue with my MATERIALIZED view refreshment.
Server170 having schema "Afccv" with the table name " Tbl_voicechat".
Server 169 having a db link name "SERVICEDB1" point to same server.
MATERIALIZED view on server 169 DB user "smschat" with the following code ::
CREATE MATERIALIZED VIEW "SMSCHAT"."TBL_VOICECHAT_NEW1" TABLESPACE "SMSCHAT"
BUILD IMMEDIATE
REFRESH FAST
AS SELECT <COLUMNNAMES>
FROM AFCCV.TBL_VOICECHAT@SERVICEDB1;
Refreshment time is 15 min.
alter MATERIALIZED VIEW SMSCHAT.TBL_VOICECHAT_NEW1 REFRESH FAST ON DEMAND START WITH sysdate+0 NEXT sysdate+(15/86400*60);
Also there is 5 indexes on this MATERIALIZED view.
Problem is ::
Sometimes it is refreshing properly in time and taking approximate 5-8 min to refresh. But sometimes it seems to be like hang or when I m checking the job for refreshment its only showing runnning.
SQL> set time on
11:44:02 SQL> alter session set nls_Date_format='dd-mon-yyyy hh24:mi:ss';
Session altered.
11:44:03 SQL> select mview_name ,last_refresh_date from dba_mviews;
MVIEW_NAME LAST_REFRESH_DATE
MGMT_ECM_MD_ALL_TBL_COLUMNS 20-jan-2011 11:44:40
TBL_VOICECHAT_NEW1 07-jun-2012 09:44:54
11:44:33 SQL> select * from dba_jobs_running;
SID JOB FAILURES LAST_DATE LAST_SEC THIS_DATE THIS_SEC INSTANCE
2893 252 0 07-jun-2012 09:44:51 09:44:51 07-jun-2012 11:14:06 11:14:06 0
11:44:34 SQL>
Now What to do and why it is not refreshing properly. DB link is working fine. no network issue is there. no locking is there on db.
Kindly tell me where to check related to this issue. or what I can do for this.
thanks in Advnace
Pradeep.
Hi All,
Some more queries I also being use to check this process working
11:44:34 SQL> select LAST_DATE,LAST_SEC,THIS_DATE,THIS_SEC,NEXT_DATE,NEXT_SEC,TOTAL_TIME,BROKEN from dba_jobs where job=252;
LAST_DATE LAST_SEC THIS_DATE THIS_SEC NEXT_DATE NEXT_SEC TOTAL_TIME B
07-jun-2012 09:44:51 09:44:51 07-jun-2012 11:14:06 11:14:06 07-jun-2012 11:14:04 11:14:04 44877 N
11:49:28 SQL> SELECT t.used_ublk, t.used_urec FROM v$session s, v$transaction t WHERE s.taddr=t.addr and s.SID =2893 ;
USED_UBLK USED_UREC
389 27054
11:49:59 SQL> /
USED_UBLK USED_UREC
390 27084
11:50:02 SQL>

View standard tabs in BP transaction

Hi Experts,
I have a requirement to view standard tabs on BP transaction which are not visible.
For Eg:
While Creating Business partner with role as (BP General) I could see the following tabs :- Address , Address Overview , Identification , Control , payement Transaction , Long text , Marketing Attributes ,Status , Documents tabs respectively.
But while creting Business partner with role as (Finincial Services BP ) I could see differenet set of tabs.
My requirement is if there is a tab name Ratings available on (Finincial Services BP ), I want that tab to be visible on ( BP General screen), i.e I want Ratings tab to be also visible on BP creation screen when the role in (BP general).
Please letme know the respective SPRO settings or is there some other settings which I am supposed to do.
Help will be appreciated.
Thanks and regards
Sourabh Verma

Hi,
For thsi go to transaction SPRO. Follow the path Cross application components -> sap business ppartner -> business partner -> basic settings -> define bp roles.
Here double click on the role and click on hide flag.
Smita.

Problem in loading transactional data from to 0MKT_DSO1(ods) to 0MKTG_C01

Hi,
I am trying to load lead transaction data to the standard Crm lead management cube from ODS.There is a problem while loading transaction data from 0MKT_DSO1(ods) to the infocube 0MKTG_C01 as the field 0STATECSYS2(CRM STATUS) is set to 10 in ods -meaning incorrect transaction. This feild is not there in the infocube.
There is a routine in the cube that deletes data records with (0statecsys2) set to 10.
THIS field is not coming in the transaction.
so, where can i see the master data in crm source system? and why is that feild getting set to 10 ?
thanks in advance!

Thanks for the reply..
I have checked the Fact table which shows
1. packet Dimension
2. Time dimension
3. Unit dimension.
I have kept the 0CALDAY as the time characteristics.
Sample data i have loaded from ODS to Cube.
Sample data in ODS.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
I have loaded this data in Cube with Full Upload.
Data in Cube.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
Again i am loading the same data to cube
Data in cube after loading.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
800001___________12/02/2009____15
The data is duplicated and it is not cumulating.
Am i missing anything on this.
Pls help..
Thanks,
Siva.

Report to view all the Roles and Transactions assinged to a particular user

Hi,
I need to develop a report to view all the Roles and Transactions assinged to a particular user along with the Authorization values. So, if provide the Username, the report should be able to give Roles, Transaction Codes and the fields and thier authorization values for that TCodes..
Regards,
Sreenivas Raju

Try this FM once - SUSR_USERS_LIST_ALV . It provides a list with Roles, Profiles, and also a detail button to check the authorization values etc.
Also try this FM - SUSR_USER_DISPLAY_WITH_AUTHS, SUSR_USER_AUTH_FOR_OBJ_GET , SUSR_USER_DISPLAY_WITH_S_TCODE

I have a problem with the transaction CBIH82

Hi experts,
I have a problem with the transaction CBIH82, when I try to assign a team in the tab "EventLocation", the transaction sends me the message "Equipment not available at the functional location".
I previously reviewed the equipment is assigned to the transaction IL03.
No authorization errors, I checked with the transaction SU53.
Any idea to solve this problem?
I appreciate it.

Hello,
I happened to again see this post where question is yet to be answered.
As per SAP standard design, only those equipment would be allowed which are directly installed on the functional location. What this means is that those equipment which are not directly assigned to the functional location (might be assigned to another superior equipment which in turn is assigned to the functional location) can't be saved.
Now, I am not sure why SAP has kept it like this when the same is allowed in notification.
Can somebody clarify the business relevance of this standard behavior??
Regards,
Pavan

My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

thanks for your response roaminggnome. I changed my password immediately after it happened and I have contacted i tunes to let them know of this dillemma.
The I-tunes credit was a promotional thing by Apple to buy their laptop. So I didn't pay for the i-tunes credit in the first place. Do you think my bank will be able to reinburse Itunes credit then? I will ask support when they get back to me.

VIEW Query Problem

Hi Greg,
I had created a view on a table which doesn't have Primary Key, but it has Unique and Not Null constraints on required columns.
I had wrote a procedure to query the data on VIEW. I have experienced strange problem, very first call to procedure will take more time than succeeding requests. For example from second request onwards, it returns data in < 2 Sec, but first transaction is taking 12 Sec to 30 Sec.
I thought that very first time VIEW is taking time to refresh it self. So, I added FORCE keyword in CREATE VIEW stattement. However, that doesn't helped out.
In my further investigation I came to know that base table on which VIEW created, has to be loaded in to memory before querying on VIEW.
So, I had executed a simple select statement on base table, before I execute VIEW query in procedure.
With this change I got results consistently < 2 Sec all the times.
My question is instead of executing the select statement on base table is there a way to load base tables data in memory before querying on VIEW?
Thanks,
Subbarao

Hi,
A view is nothing but parsed SQL statements stored in the database, a view may or may not run faster. If you execute the SQL used to define the view how much time is it taking. If you want try looking at MATERIALIZED VIEW , that may help you.
thanks

View maintenence problem in UCCHECK?

Hi everyone,
Does anyone know anything about the unicode error 'VIEW'. I got this when I executed the tcode UCCHECK.
The message I got is:
'Generated Code for View Maintenance Dialog is not Unicode-Compatible You can regenerate with the program RSVIMT_UC_VIEW_MAINT_GEN'.
I tried to regenrate with the current program, but no use.
I read in one of the threads, that if we set the unicode checks active flag in the error program it will be solved.
Tried it but no result again.
I even tried to activate the view related to this program in SE11, as you can expect didn't work again.
So has anyone ever come across this problem? if so please help me in solving this.
Thank you all in anticipation.
Goldie.

hi ,
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
Call transaction SAMT
Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
http://www.pac.co.il/infoweek/Resources%5CKeter_ECC6_Upgrade_Presentation_170107.ppt
The above link gives u a power point file on ecc 6.0 updation and what are required .
Check the below links for understanding of unicode.
UCCHECK downporting
UCCHECK
http://www.sap.com/korea/Company/Events/techday05/img/data_01.pdf
http://www.sap-press.de/download/dateien/1240/sappress_unicode_in_sap_systems.pdf
Re: ECC 6.0 Upgrade & changes required in programs
regards,
venkat.

EAI viewer Display Problem

Hello Guys,
We are using SAP ECC 6.00 version.I use SAP IN BUILT integrated viewer to view the auto CAd files.i have customized relevent info in DC30 for the workstation network.
My problem is ,when i open any Original of autocad from DIR ,it opens thru integrated viewer but there i cant see drawings...Its blank..!?!?!Till date it was opening and suddenly its not displays atall...., also some time the keyusers r unable to view , where as consultants we are able to open up....
any usefull advice from your end?1?!how to Fix this problem...
Regards,
Murali.S
Points for sure

Hi,
do you have maintained the correct mime type for this file format in transaction DC30? If not please see SAP note 933934 which contains all necessary mime-types for the different file formats.
Further please note that AutoCAD 2007 file format is only supported by ECL Viewer 6.
Best regards,
Christoph

Cache Refresh Problem in SXI_CACHE Transaction in new client 700

Hi Experts,
    We have installed and configured the new PI7.1 server and were checking its readiness by going through the Readiness Check Document. At one stage while we run the transaction SXI_CACHE in client 700 we are not getting the option of " Start Complete Cache Refresh" in highlighted mode. Thus we are not able to refresh the cache in client 700. But if I login in Client 001 and login using SAP* and run the SXI_CACHE I am able to see all the pipeline steps as well the option for complete Cache refresh and Adapter cache referesh is in Highlighted mode. The status is also green. Can somebody us in knowing where should we look into to solve this problem so that these option are available in the new client for refershing the CACHE.
Thanks
Regards
suk4023

Hi Soujanya,
    Yes we tried with the link given by you . we got the folowing error
403   Forbidden
SAP NetWeaver Application Server 7.11 / AS Java 7.11
Error: You are not authorized to view the requested resource.
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: No details available
Yes we tried by restaring the system too, but the status is same.
Any more inputs will be appreciated............
Thanks
Regards
Suk4023

Problem with Me23n transaction

Hi
I am facing one problem where when i run transaction ME23 n to display the PO, and than if i select the button through which i can enter other PO numbers and display them ,I get the error that
Input should be in the form__.__._~,_V".message number 00 088
As i am just in display mode i am not doing anything just viewing the PO how can i get such message.
I have tried changing my Default settings also it does'nt help.
This problem is coming only for me not for others.all others are able to see it.
Can you please suggest what is the problem
This prolem is not specific to any PO this is commom to all the PO's i am trying to view.
Once i get this error my system hangs i cant go back ,i have to log off to come out.

What has happened is that the number is not entered in the correct format. This happened in your last PO. When you go to ME23N it tries to retrieve your last PO and gets this error.
To correct this, please go to ME21N and then select the button to display other POs.
I am certain this will solve your problem. If, by chance, it does not, create a dummy PO and save it. Then go to ME23N and try to display the PO you want.
Let me know if it resolves your problem
Lakshman

Problem in Distributed transaction with Oracle 8.1.7 and Weblogic 7.0

          Hi,
          I am using two unmanaged weblogic 7.0 servers and oracle 8.1.7 enterprise edition.
          I am using oracle.jdbc.xa.client.OracleXADataSource for creating connection pool
          in weblogic. The pool gets created fine but when connection it is getting used
          it throws up following error.
          java.sql.SQLException: ORA-02044: transaction manager login denied: transaction
          in progress
          ORA-06512: at "SYS.JAVA_XA", line 0
          ORA-06512: at line 1
          at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
          at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
          at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
          at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
          at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822)
          at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1446)
          at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1371)
          at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1900)
          at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:363)
          at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:407)
          at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:171)
          at weblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
          at weblogic.jdbc.jta.DataSource.start(DataSource.java:569)
          I don't know what is causing this problem.Please send me the pointers.
          Regards,
          Vikash


ID is a NUMBER and id.toString() is not a number, for
example it ca be a null reference.
well we tryed also this version :
ps.setLong(1, id.longValue());
moreover the exception wasn't thrown for the value of id :56 but was thrown for the value of id : 88. Hence I think it is a case of something other than my code.
michal

VMware Fusion with Oracle Data Integrator - 'View data' problem

I am running ODI and Oracle 10g Express Edition under XP (SP2) under VMware Fusion (Beta 3) on a Macbook Pro. (Already lost interest??)
The packaged demo works fine..
I have created a set of tables with 10g and set up the ODI environment - physical & logical schemas, KMs etc. No problem. Successfully created reverse-engineered model from the tables. So far, fine.
When I try to view the data associated to the data stores I get error: Execution failed; ORA-00903: Invalid table name.
I have tried using different contexts etc. Obviously, the reverse engineering process can 'see' the tables..
Any advice please?
Many thanks, Steve.

Hi,
I tried to install the essbase driver adapter on ODI, but I can't connect to Essbase using topology manager. Anyone know about essbase drivers for ODI. I used ODI 10.1.3.4.
Thanks all.
Regards,
Sumardi

View selecion problem in MM12 transaction

Similar Messages

Maybe you are looking for