Restrict specific tables from SE16/SE11

Dear Experts,
We have a requirement of lock from view of some specific tables in SE16/SE11. Please provide the solution.
Regards
Shishir

Create a new authorization group from SE54.
Go to SE54, then select Authorization group and click create / change.
Here create a new authorization object by clicking the new entries.
Then note the authorization group and assign the authorization group to table.
Go to SE11, enter the table name, click display. Then select Utilities - Assign Authorization Group.
Then click edit and enter the authorization group (which is created earlier)
Then in PFCG, for authorization object S_TABU_DIS enter the authorization group.
Now check the tables in SE16.

Similar Messages

  • How can I hide a field a table from SE16

    Hi all,
    I have an urgent requirement, can anyone help me? How can I hide or mask any field of a table from SE16. Also how can I restrict the user not to put a restriction on a particular field of a table so that this field should not be accessed for SQVI/SQ01.
    Awaiting for reply.
    Useful answers will be rewarded immediately with full points.
    Tnx.

    You could hide the column, by using the standard functinoality of the ALV output, you would need to hide the column, and save a default layout.  This way the next time you come into this display, the column will not be there.
    Regards,
    Rich Heilman

  • How to restrict infotype data from SE16 based on country?

    Hello.
    We're a global company and the US organization wants to view infotype data from the PA tables.  At the same time, we are not allowed to view data from other countries from these PA tables.  Is there a way to restrict the output in SE16 by country code?  If not, are there any options we can implement so that we can view the US data from these PA tables?
    Thank you.
    Ashish.

    But SE16 doesn't seem to be doing checks on Personnel Area and Subarea.  Isn't that applied to user roles so that ABAP programs only extract relevant data for that user?  The only authority checks I found for SE16 in the code are:
      authority-check object 'S_TABU_DIS'
               id 'DICBERCLS' field tddat-cclass
        authority-check object 'S_TABU_CLI'
                        id 'CLIIDMAINT' field 'X'.
    So I am not clear how SE16 is restricted by Personnel Area and Subarea.
    Thanks,
    Ashish.

  • Restricting certain tables from being viewed

    Post Author: Adam00
    CA Forum: Data Connectivity and SQL
    Hello,  I need assistance with restricting some tables within Crystal.I have an SQL database with multiple tables, some of which we do not want to be seen through Crystal reports as they contain sensitive information. Is there a way in which to exclude a table or two from the crystal database view????  Thanking you in advance.

    Post Author: V361
    CA Forum: Data Connectivity and SQL
    Try this, file, options, database, in the data explorer there is a table name like,  owner like box.  Try excluding them there... I pulled this from the help section  
    Table name LIKE
    This box allows you to enter the SQL LIKE function to specify the kinds of table names you want to appear in the Database Expert. You can use the underscore character (_) and the percent sign character (%) as wildcards with this function. The underscore character specifies any single character, and while the percent sign signifies any character string. For example, DAV_ matches DAVE only, while DAV% matches both DAVE and DAVID. Table name Like C% would display only those tables that have a table name beginning with the letter C.
    Owner LIKE
    This box works exactly like the Table name Like box except that the LIKE function here is used to select the Owner (or Creator or Alias) of the table, not the table name itself. For example, Owner Like C% would display only those tables that have an owner beginning with the letter C.

  • Import / Export Specific tables from DB

    Hi,
    I am trying to export all 'AD_' tables from my database from another database with their constraints.
    I tried a command just for export one table from my cmd :
    "exp adempiere/adempiere@simext15:1521/compiere2 file=emp.dmp tables=(AD_ACCESSLOG)"
    it export fine but when try to import this file from using command
    "imp adempiere/adempiere@simext15:1521/compiere2 file=emp.dmp fromuser=adempiere touser=adempiere tables=(AD_ACCESSLOG)"
    it gives me so many errors:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Export file created by EXPORT:V11.01.00 via conventional path
    import done in WE8MSWIN1252 character set and UTF8 NCHAR character set
    . importing ADEMPIERE's objects into ADEMPIERE
    . . importing table "AD_ACCESSLOG" 0 rows imported
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNIQUE INDEX "AD_ACCESSLOG_KEY" ON "AD_ACCESSLOG" ("AD_ACCESSLOG_ID""
    " ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FR"
    "EELIST GROUPS 1 BUFFER_POOL DEFAULT) LOGGING"
    IMP-00017: following statement failed with ORACLE error 2264:
    "ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "AD_ACCESSLOG_KEY" PRIMARY KEY ("
    ""AD_ACCESSLOG_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(I"
    "NITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "
    ""USERS" LOGGING ENABLE "
    IMP-00003: ORACLE error 2264 encountered
    ORA-02264: name already used by an existing constraint
    IMP-00017: following statement failed with ORACLE error 2264:
    "ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "ADTABLE_ADACCESLOG" FOREIGN KEY "
    "("AD_TABLE_ID") REFERENCES "AD_TABLE" ("AD_TABLE_ID") ENABLE NOVALIDATE"
    IMP-00003: ORACLE error 2264 encountered
    ORA-02264: name already used by an existing constraint
    IMP-00017: following statement failed with ORACLE error 2264:
    "ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "ADCOLUMN_ADACCESSLOG" FOREIGN KE"
    "Y ("AD_COLUMN_ID") REFERENCES "AD_COLUMN" ("AD_COLUMN_ID") ON DELETE CASCAD"
    "E ENABLE NOVALIDATE"
    IMP-00003: ORACLE error 2264 encountered
    ORA-02264: name already used by an existing constraint
    About to enable constraints...
    IMP-00017: following statement failed with ORACLE error 2430:
    "ALTER TABLE "AD_ACCESSLOG" ENABLE CONSTRAINT "ADTABLE_ADACCESLOG""
    IMP-00017: following statement failed with ORACLE error 2430:
    "ALTER TABLE "AD_ACCESSLOG" ENABLE CONSTRAINT "ADCOLUMN_ADACCESSLOG""
    Import terminated successfully with warnings.
    I tried a lot for this I just want to export and restore all 338 tables related to Application Dictionary from one database to another database with their constraints and data.
    I tried also using datalink but it only copy the structure and data but not the constraints, I want all three should be copy in to another database.
    I know their is dependency on a table to another table but i don't know exactly it..
    tried it onces again i am able to do export and import tables but only primary key related to every table gets restore neither Unique key nor Foreign key , please help me out from this i can export and import with full table with data and its all constraints.
    Please help me out from this problem, waiting for your valuable suggestions.
    Regards,
    Manu

    ORA-02264: name already used by an existing constraint
    The constraint is already exists with the same name. So drop that before issuing the import command.
    And ,
    1. Check if all tables get imported
    2. If all tables get imported then create the constraints manually
    3. If tables do not get imported then import tables manually by specifying their name in imp statement
    Thanks

  • Export specif tables

    I need to export specific tables from a schema in database
    Eg: select table_name from dba_tables where owner='ANALYTICS' and table_name like 'W_%'
    This query returns around 1500 tables.
    How can I take export of these 1500 tables (Passing these 1500 tables one by one is not an easy task)
    So need to have some tool, where all these tables are retrieved with a " , " and in one liine

    The INCLUDE parameter has a limit of 4000 bytes. Pl see these related threads for a solution
    exp datapump problem
    Re: expdp - tables
    HTH
    Srini

  • Selection on specific table

    Dear All,
    Is it possible that user can't select specific table from toad. I already revoke selection from user but user select from toad with no error.
    Regards.

    SQL> revoke ALL on testtt from test1;
    Connected to Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    Connected as SYS
    SQL> create table testtt(a number);
    create table testtt(a number)
    ORA-00955: este nombre ya lo está utilizando otro objeto existente
    SQL> create user test1 identified by test1 ;
    User created
    SQL> grant create session to test1;
    Grant succeeded
    SQL> grant select , update, delete, insert on testtt to test1;
    Grant succeeded
    SQL> connect test1/test1
    Connected to Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    Connected as test1
    SQL> select * from testtt;
    select * from testtt
    ORA-00942: la tabla o vista no existe
    SQL> select * from sys.testtt;
             A
    SQL> connect sys as sysdba
    Connected to Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    Connected as SYS
    SQL> revoke ALL on testtt from test1;
    Revoke succeeded
    SQL> connect test1/test1
    Connected to Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    Connected as test1
    SQL> select * from sys.testtt;
    select * from sys.testtt
    ORA-00942: la tabla o vista no existe
    SQL>

  • Download table data from se16 to excel

    Hi I am trying to download table data from SE16 (field widths, descriptions etc) to Excel, but cannot as the option local file is greyed out under System>List>Save.
    Table>Print doesn't let mn downlaod either, jsut print. As I have 50 tables to download, is there a better option than copy and paste into excel?
    Thanks

    Hi,
    You can use the T-code SE11 for downloading the values from database table, after entering Table name ,
    click on Display (F7), it will take you to new screen, then enter (CtrlAltF10),
    Now enter the input values and execute.
    Kindly check with this.
    Best Regards,
    Vasu.

  • Restrict Table in SE16 Transaction Code

    Hi All,
    Can we restrict some standard table(eg. Mara, mseg, mkpf) in SE16 trsanction code so that they can not browse the restricted tables.
    Couple of days before SOX Audit was carried on and they send some conflicts. I am not able to make it what is these statrements, which i have mentioned in below.
    SE16_CHANGE (Change SAP tables)     
    SE16_CHANGE_CURRENCIES (Change currency table)
    SE16_CLIENT_TABLE (Change client table T000)          
    Thanks & Regards,
    Krushna

    Hello,
    You can restrict access to tables with authorisation object S_TABU_DIS.
    If a query accesses a certain table when it is run, the user needs display authorization for authorization object S_TABU_DIS. Field DICBERCLS must contain the table’s authorization groups.
    This authorization object protects all tables from unauthorized access. If you are accessing tables that are part of a logical database, authorization for data access can be set up using the logical database.
    This is the same authorization that you need in order to be able to display tables using either the Data Browser (transaction SE16) or the initial table maintenance screen (transaction SM31).
    Hope this helps.

  • Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

    Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

    You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

  • SQL* Loader Loading specific column from CSV file to the table

    Dear All,
    Iam Loading specific column from .CSV file to the oracle table.
    Could pls help how i can load only that cols into the table
    Eg: CSV file having id, Frst_name,Last_name, Address,Phone,Insurance etc
    out of this I want to load only Frst_name,Last_name columns to oracle table say fname and lname.
    Thanks in Adv.
    Junu

    Lily,
    I made some changes to your table def but you will get the idea
    -- Table EMPLOYEE
    CREATE TABLE EMPLOYEE
      EMPID        NUMBER                           NOT NULL,
      EMPNICKNAME  VARCHAR2(10 BYTE)                    NULL,
      FNAME        VARCHAR2(20 BYTE)                NOT NULL,
      MI           VARCHAR2(20 BYTE)                    NULL,
      LNAME        VARCHAR2(20 BYTE)                NOT NULL,
      FULLNAME     VARCHAR2(20 BYTE)                NOT NULL,
      HIREDATE     DATE                             DEFAULT SYSDATE               NOT NULL
    --  data file employee.dat
    1,amy,b,amy b
    2,cindy,d,cindy d
    3,eric,f,eric f
    4,gary,h,gary
    -- Control file : Employee.ctl ( you can use truncate, replace or append , see sqlldr for more options)
    load data
    Truncate into table employee
    fields terminated by ","
    optionally enclosed by '"'
    TRAILING NULLCOLS
    empId INTEGER EXTERNAL,
    FName char(20),
    LName char(20),
    FullName char(30)
    now to load use following or you can speicify infile in control fle
    sqlldr username/passowrd control=employee.ctl  data=employee.dat log=employee.log
    {code}
    Hope this help.
    Regards                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Issue in loading specific columns from a file to teradata table using IKM

    Hi,
    Can any one help to resolve the issue in loading specific columns from text file to teradata table.
    i tried using IKM file teradata and columns are getting displaced.
    my requirement suppose i have 5 columns in file and i have to load only 3columns to table using IKM.
    same thing can be achived using LKM file to teradata but i want use IKM.
    please suggest me on this
    Regards
    Vinod

    Hi,
    I believe that the problem you are having is that you have a delimited file, of which you want to pick columns from position 2,3,5. In this case, ODI will pick the first 3 columns of a delimited file regardless of position.
    For example, if you a tab delimited file with c1,c2,c3,c4,c5 columns, and you want only columns c2,c3,c5 - when mapping these in an ODI interface, and executing, you will actually pick up the data from c1,c2,c3 as these are the first three columns in the file (reading from left to right). You can ignore "columns" on the right hand side of a file, but not the left. E.g delimited file with c1,c2,c3,c4,c5. Only pick columns c1,c2 will give you data for the first 2 columns
    Create a temporary table to load all the data from the file, and use you temp table to extract the data you require. Or you could get the file created with the first three columns as the columns you require.
    Cheers
    Bos
    Edited by: Bos on Jan 18, 2011 1:06 PM

  • How to read specific fields from BW table  into ABAP?

    Hi Experts,
    Can someone help me how to use to FM: RFC_READ_TABLE to read specific fields from a BW  table '/bic/zcust_chO01' which DOESN't EXIST IN ABAP.
    I am getting an error in OPTIONS & DATA parameters.
    Any help would be higly appreciated with points.
    Thanks
    Dan

    Dan,
    FM: RFC_READ_TABLE is a RF FM so by providing BW system's RF destination you can get the values from required table.
    TRY this:
    CALL FUNCTION RFC_READ_TABLE destination <BW_RF_destination>
    Susanth.

  • Issues in exporting data from SAP tables in SE16 to excel

    1.How can I save an sap table (displayed through SE16) in ECC6 into a pivot table in excel. [ I have seen this option in R/3 4.7, but do not see it in ECC.]
    2.How can I copy all the rows of a 3000 row SAP table in SE16 and paste the values into excel. I need to do this in one shot and not page by page.
    3.What option do I need to select inorder to preserve the formating of the values while saving as a local file in a spreadsheet format. All the values with leading zeros,like company codes gets saved with only their numeric portion when I save a SAP table as a local file. for eg company code 0001 gets saved in excel as just 1,company code 0056 gets saved as 56 etc. How do I prevent this? What option do I need to set in SAP in order for the values to be downloaded as is, without any truncation of leading zeros.

    1.  I don't know.  How about creating a pivot after exporting data
    2. System->List->Save->local file->clipboard
    Then paste whole lot in Excel
    3. This is a problem with Excel, not SAP.  SAP exports with leading zeroes.
    You could export as flat file & import into Excel into a spreadsheet with an appropriate numbering format.

  • Protect sensitive HR tables from ABAPer and BASIS

    Hello
    We are trying to work out some security authorizations where in we can protect HR master data through direct access to HR tables through SE16 or SM30 for info type tables like PA0008 or PA0015 etc. I know that these tables have authorization group 'PA' and we can build a role using S_TABU_DIS using this autho group but we have about 30 such infotypes to be protected. If we build a role with S_TABU_DIS and Auth group='PA' we will land up protecting all the Infotypes. Other problem is that if we create a new auth group 'ZPA' for these 30 infotype tables, thats too much customization as we might have problems during future upgrades.
    My question to the forum members is - What solutions were explored or implemented for such situations?
    Thanks
    Snehal

    Dear Snehal,
    Maintain all such sensitive infotypes in a Z table. Implement a proper BAdi/Enhacement that will be called whenver user accesses the transactions that you want to restrict and validate against that Z table. If the entry exists in Z table raise an error message saying 'You are not authorized' else display.
    You would need to bypass this validation for users other than ABAPer or BASIS. For that you may need to maintain proper naming convention or some logic.
    Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
    REPORT ZTEST.
    TABLES: TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA: FIELD1(30).
    DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS: P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA: WA_TADIR TYPE TADIR.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    ENDCASE.
    Alternatively, you can do the following:
    1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
    2. Double click on to the program name and go inside the program (Abap editor)
    3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
    4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
    ull get a list of Enhancements related to that Componene....
    5. Choose which ever enhancement will suit ur business need ..
    6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
    For a user exit......
    Finding whether there is any User Exit or not for tcode VA42
    1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
    2. Double click on to the program name and go inside the program (Abap editor)
    3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
    Hope this will help.
    Regards,
    Naveen.

Maybe you are looking for