Viewing the delta updates from a months of data

Hi experts,
i am loading the data as delta update everyday and once i fail to run the delta update.at the end of month client asks me to show the history of deltas for a month?where i can show the delta updates of a month?is there any tables for showing the delta updates ?

Hi,
I think it willbe in table ROOSPRMSC, here u can find out the time stamp of delta uplaods.
Regards-
Siddhu

Similar Messages

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months.

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months. There is definitely a glitch somewhere because if I am on day view and try to click on day 15 of October, it will not let me. It totally is acting weird.

Free fonts, fonts from a reliable foundry?
Have you tried removing them temporarily?
Do you still have problems if you create a new Windows user account and log in with that? How about if you start in Safe Mode?
And I would run a memory checker and see Troubleshoot font problems | Windows

Get back the Data mart status in ODS and activate the delta update.

I got a problem when deleting the requests in ODS.
actually there is Cube(1st level. it gets loaded from an ODS(2nd level). this gets loaded from 3 ODS'S( 3rd level). we were willing to delete recents requests from all the data tardets and reload from PSA. but while delting in the request in ODS(2nd level), it has displayed a window, showing as follows.
- the request 132185 already retrived by the data target BP4CLT612.
-Delta update in BP4CLT612 must be deactivated before deleting the request.
- Do you want to deactivate the delta update in data target BP4CLT612.
I have clicked on execute changes in the window. it has removed the data mart status for all the request which i have not deleted.
in the same it happened inthe 3 ODS's(3rd level).
I got clear that if we load further data from source system. it will load all the records from starting.
so to avoid this can any body help me how to reset the Data mart status and activate the delta update.

Hi Satish,
U have to make the requests RED in cube and back them out from cube,before u can go for request deletions from the base targets(from which cube gets data).
Then u have to reset data mart status for the requests in your 'L2 ODS' before u can delete requests from ODS.
Here I think u tried to delete without resetting data mart status which has upset the delta sequence.
To correct this..
To L2 ODS,do an init without data transfer from below 3 ODS's after removing init request from scheduler menu in init infopackage.
Do similar from L2 ODS to Cube.
then reconstruct the deleted request in ODS.It will not show the tick mark in ODS.Do delta load from ODS to Cube.
see below thread..
Urgentt !!! Help on reloading the data from the ODS to the Cube.
cheers,
Vishvesh

What is the best way to cancel the related update from aboutToUpdate ?

What is the best way to cancel the related update from DescriptorEventAdapter.aboutToUpdate ?
Anyway to manipulate descriptorEvent.getQuery() so that it doesn't generate anything?
In our specific case, TopLink 11 - EclipseLink 2.0.2 generates useless update, so we want to silence them to avoid DB round trip.

Mustafa,
Thats the way to kill the Job, But We are not Authorized for SM50.
At present we will raise a request to the Basis to do that. Speaking from user point of view is there any better way to handle it.
Tony

Client not receiving the software update FROM SCCM 2012 R2

We have SCCM 2012 R2 installed and configured for SUP.and i have synchonice the SUP with WSUS server in the same which is there in the same machine.
Now i can able to deploy the software update from SCCM 2012 R2 without any erro to the windows 7clients, but client side when i check there is no update installed in the clients , but seems there is no error in the client logs

Hi,
I'd start with running a "Software Updates Scan Cycle" from the configuration manager control panel applet and check the log file Windowsupdate.log, WUAhandler.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HOw to rollback the delta updation

HI,
By mistake one my teamate had update the delta to ful updation. HOw to roll back the delta updation ?
thanks
sangram

Sangam
if u have deleted the init request from the cube, u won't have data for the same in the cube!!
First check if the init flag still exist. For this go in the infopckge-> scheduler-> init flags.If not set this flag on.
So you didn't delete the initialize request from Data mart and at Source system.
Then go to T.code RSA7 and check the data source was exit or not. If the data source exit then you can fetch the data by delta update method other wise again you need to initialize it..
Hope this helps
Thnaks
Sat

The delta update for the InfoCube ZCUBE is invalidated

Hi BI Experts,
I am working on BW 3.5.
For the datasource 2LIS_13_VDITM there were some requests(deltas) missing for 3 days. So I got all the documents there were missing or not updated in BW. I deleted the setup tables and filled them with the new document numbers.
I did a full repair request from the Infopackage level and the data got updated in ODS.
But the DM Status is missing for all the requests in the ODS.
And the data for the full repair request didnt get updated in the Cube and I got the following error:-
The delta update for the InfoCube ZCUBE is invalidated. The can be due to one of the following:
1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
And the following delta was also not successfull.. How can I clear up this mess and ensure smooth flow of deltas. How can I set the DM status.
Thanks
Kumar

Thanks for your reply.
When I did a Full Repair Request on the ODS the data is in the New table and the DM status got reset(vanished). And the following day delta got failed( data for that request did not get updated in ODS and Cube)
How can we bring back the DM Status and make the deltas successfull.
Thanks
Kumar

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Welcome to the Apple Community Lschaef5318.
You need one Apple TV for each TV.

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

I just upgraded to ilife iphoto 09. Now when I alter images in iphoto the iphoto 8.1.2 program freezes up. I have downloaded all the latest updates from apple, but nothing seems to correct this. Anyone else experience this?

I just upgraded to ilife iphoto 09. Now when I alter images in iphoto 8.1.2 the program freezes up. I have downloaded all of the latest updates from apple, but nothing seems to correct this problem. Has anyone else experienced this?
Thanks for your reply,
LuAnn
<Email Edited by Host>

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

The DataSource ZGLOBAL_SPND still has no target system for the delta update

Dear Experts,
I have created a Generic Datasource, while checking records in rsa3 iam getting below error.
Error: The DataSource ZGLOBAL_SPND still has no target system for the delta update.
Source system is already created.
For some of the datasources iam getting this msg.
regards
KV

Hi,
Fisrst did u enabled the Delta for Generic.If yes, the in RSA3 select Update Mode as "D" then provide the BI Trget system and execute.
If you correct Target system and update mode D then it should fetch Delta records only...If not please write to SAP about this issue.
Regards
Ram.

Error in RSA3 - no target system for the delta update

Hi friends,
I have created one datasource but in RSA3 when i press F4 at target system it gives me msg like "The DataSource V_BW_DPP still has no target system for the delta update" what could be the reason? kindly help me.
Regards
Suyash

Hi Suyash,
First check whether the BW system is connected to R/3 or not by Right click on Source system in RSA1 and selecting the option Check.
Also What is the update mode you have chosen in RSA3?. Is it full ( F ) or Delta (D) . If you have chosen delta then you check in RSA7 whether the data source V_BW_DPP is appearing or not . If it is not appearing in RSA7 do init upload in BW system for the data source and then check in RSA3.
Regards,
Prakash

After done the Mavericks update from Mountain Lion, I can't no more extend my applications to the second screen. Can somebody help me ??

After done the Mavericks update from Mountain Lion, I can't no more extend my applications to the second screen. Can somebody help me ??

Check here:
System Preferences > Mission Control > uncheck Displays have separate Spaces > Log Out ( >Log Out <user>) > Log back in

How do I remove the Adobe updater from the Mac menu bar?

I would like to remove the Adobe Updater from my menu bar for my Mac, I found a lot of instruction to remove it for other versions of the updater, but the I can't find that option in the new CS6 updater.
If there is a way to completely stop the updater from running, that would be useful too.
I also don't understand why the updater say "4" in the menu bar, I only have Photoshop installed, and there are no update avaiable.

I am one of the many for whom Application Manager just started to crash every time I tried to open it. I was also getting the 'trial' dialog box, then a request for a serial number, even though I subscribe to Creative Cloud.
After hours with Adobe Tech Support, I have gone the around-your-elbow-to-get-to-your-mouth method of creating a second user and installing CC apps there...hopefully this is temporary situation, but a girl has to work.
My question is this: how do I remove the updater notifications from the menu bar [original user] if I can't open Application Manager? It crashes every time...besides, Tech Support had me send it to the trash and delete it. I went to my other user ID, updated all, but I'm still showing the annoying update badge in my original menu bar. [Altho' Camera Raw failed to update...that's another issue]
Please advise. I had CS5.5 Design Premium...maybe it would be easier just to upgrade that to CS6 and ditch Creative Cloud!
Thanks in advance.

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

Viewing the delta updates from a months of data

Similar Messages

Maybe you are looking for