Vignette not racking with mask in SpeedGrade CC
Hello all,
I am trying to track a mask with a vignette on a series of identical short shots.
What I am finding is that while the mask (and vignette) will track with pretty good accuracy on most of my clips I have found that on a few shots the vignette moves to random positions in bertween keyframes.
Any suggestions on how to get the two to track better?
Thanks,
daniel
Fran,
I the project I am woring on is a "direct link" to Premiere workflow. Is it the .PRPROJ you want?
Thanks,
D
Similar Messages
-
9scale will not work with mask
Hi all
been trying to use the 9scale feature on a moviclip that
change its size
according to an image being loaded
and then setting it as a mask to the content
the clip 9scale feature works as expected
as long as it's not a mask
did any of you tried any of the sort ?
for example
a gallery
loading an external image into a clip
i want the frame of the image to be a rounded edges rectangle
therefore i use a clip to set the mask
which suppose to scale itself according to the image being
loaded
9scale will not work niether with a ui layer mask
nor with a setMask( ) unfortunatly
here is the code
on the stage are the clips
set to 9scale mode in the properties via the library
thanks
yariv
//set width according to the image loaded
//setMask doesn't work
var mcl:MovieClipLoader = new MovieClipLoader();
var l:Object = new Object()
l.onLoadInit = function(target:MovieClip) {
//trace(target._width)
target._parent.bg_mc._width = target._width + 15;
target._parent.mask_mc._width = target._width ;
target.setMask(target._parent.mask_mc)
mcl.addListener(l)
mcl.loadClip("collaborate.jpg",container_mc)I know I've found 9-scale to be quite buggy and
unpredicatble. Shame.
Jecykl -
Problems with masks after sending sequence back from SpeedGrade to Premiere (CC)
Hello,
I'm colour grading a clip in SpeedGrade CC using the new direct link function. For the colour grading I used different layers and also masks. Once I'm done I sent my sequence back to Premiere Pro CC.
I see, Premiere shows me exactly the colour correction I did in SpeedGrade except of one thing:
The places where I used masks in SpeedGrade to light them for instance a bit up are now full of pixeled lines...
I thought it's just a problem with the Preview, so I exported it. The pixeled lines stayed.
Again: In SpeedGrade is everything fine, but when I'm sending the sequence back to Premiere there are these pixels.
It's really irritating because one day before it worked very good without any problems and I was practically doing the same as now.
Please help me, if you can! Thank You!Thank you but my masks are not animated. Premiere just can't reflect the colour correction I did for these masks. Here's an example...on the right edge I created a mask in SpeedGrade. And that's what Premiere is showing me when I send the sequence back from SpeedGrade to it:
Does anybody know the solution? -
"IP and router address not consistent with subnet mask"
Hi all,
i have one of the old Powermac G5's running os x 10.3.5 "Panther" with a dual 2.5ghz processor, 512mb or ram, 160 gig hd, and no wireless card. I've been trying to hook the computer up to my network via an Ethernet cable (I have a Linksys WRT54G series router).
the problem is this: When I go through the Network utilities using the "assist me" option, select the LAN option, put in the necessary information (IP address, subnet mask, router address, and the dns host), and select continue, this message pops up:"IP and router address not consistent with subnet mask".
What I've found is that no matter if the computer is plugged in with a cable to the Ethernet port the message comes up which is very unusual.
Thanks in advance.Have you verified that you indeed have the proper subnet entered?
Why don't you just let the Mac obtain its ip address from the router via DHCP? -
Brush Tool is not working with Layer Mask
Working with Windows platform, using Photoshop CS4, Brush Tool is not working with Layer Mask, how can I resolve this challenge?
Also, do you have any Selections active - maybe hidden?
When you have your Layer Mask's Channel active, do your Colors change to black and white?
Good luck,
Hunt -
Speedgrade layer with masked blur doesn't show in Premiere cc direct link?
I'm going into SG from a premiere sequence.
my premiere sequence contains an adjustment layer.
In SG I put a "blur vignette" basically a blur effects with a vignette mask.
when going back to Pr it doesn't show up.
I have the latest software on a macpro 10.7.5
Thank youThere are occasional annoying behaviors with masks that have been noted. We're all hoping that as this has been something Adobe's been working at fixing, that the next update/release solves most of them. When they do work it's just like magic, right?
Neil -
Photos not resizing into template with mask
When I drag certain photos into the iWeb template, they are not resizing. When I try to change the size of the photo within the mask, the whole mask changes accordingly. I do not want the masked area to change, just the size of the photo so that it fits.
HELP!!It's difficult (for me at least) to imagine what you are seeing. If you want, you could post some screenshots. I haven't tried this free GrabUp app, and it's not the only way to post screenshots, but it claims to be fast and easy to use:
http://www.grabup.com
...download it, take a sequence of screenshots of the problem and post the URLs from Grabup here.
It may also be useful to know the following:
. pixel size of the image and its file type, e.g. JPG or PNG
. iWeb page style, e.g. Blog, My Albums, Photos
Alternatively, simply resize your photos in iPhoto before dragging them to iWeb. -
CS6 file "not compatible with this version of Photoshop"
We are using Adobe Creative Suit 6. Yesterday i've created a file, and today i cannot open it with any software. (Bridge shows the thumbnail but the file is corrupted.) I get the "Could not complete your request because the file is not compatible with this version of Photoshop" error. The file contains multiple layers, without any masks. Originally it was a NEF file (Nikon raw). I used vanishing point, because its an interior photo. (it doesnt relevant for the problem) I have an earlier version, where the vanishing points are defined, but the textures are missing. Main question is, how this can be??? I worked on that version for more than 2 hours. The file size is small, it's only 133.579.959 bytes (133 Mb). The image is 4288 x 2848 px, 240 DPI, RGB 8-Bit, Fogra39 ICC profile. The computer is up to date, nor the hw or the softwares are corrupted. The file saved locally, so it's not a network problem. I saved the document, and left the machine for about 15 minutes, then i went back, so the save had to be complete. (on SSD it took about a couple of secs) The biggest problem is, i have to work with a large amount of photos in Photoshop. But after this i have some bad feelings about this job. We have to create these PSD files both for ourselves and for our client for further use. (It's a huge furniture factory) The hardware has 16 gigs of RAM with an Intel i5 operating system Windows 8.1. Any ideas? (ps.: i didnt' find PSErrorlog.txt file) Oh i almost forgot. After installing CS6 my Adobe Acrobat Pro stopped working in about 2 weeks... So. The job is waiting, but we cannot wait for a long time, we gonna loose our biggest client because of a sw error?
You write this is not compatible with this version. Did you install all updates and did you update the camera raw too?
-
Hi All,
I am facing the below error while installing Oracle RAC in Silent Mode.
SEVERE: There are no common subnets represented by network interfaces across all cluster nodes.
SEVERE: [FATAL] [INS-40925] One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.
CAUSE: Not all nodes have network interfaces that are configured on subnets that are common to all nodes in the cluster.
ACTION: Ensure all cluster nodes have a public interface defined with the same subnet accessible by all nodes in the cluster.
My /etc/hosts is given below.
127.0.0.1 localhost localhost.localdomain
#Public
192.168.1.101 rac1 rac1.localdomain
192.168.1.102 rac2 rac2.localdomain
#Private
192.168.2.101 rac1-priv rac1-priv.localdomain
192.168.2.102 rac2-priv rac2-priv.localdomain
#Virtual
192.168.1.103 rac1-vip rac1-vip.localdomain
192.168.1.104 rac2-vip rac2-vip.localdomain
#SCAN
192.168.1.105 rac-scan rac-scan.localdomain
Could you please help me to get rid of the error INS-40925....Any Idea...???Hi Ramesh,
Please find the result of ifconfig -a from both nodes RAC1 & RAC2.
ifconfig -a in RAC1
[oracle@rac1 Desktop]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 08:00:27:17:7A:D5
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe17:7ad5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:102 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25472 (24.8 KiB) TX bytes:3322 (3.2 KiB)
Interrupt:19 Base address:0xd020
eth1 Link encap:Ethernet HWaddr 08:00:27:C0:AC:DB
inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec0:acdb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:240 (240.0 b) TX bytes:816 (816.0 b)
Interrupt:16 Base address:0xd240
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6394 (6.2 KiB) TX bytes:6394 (6.2 KiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ifconfig -a in RAC2
[oracle@rac2 Desktop]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 08:00:27:C9:38:82
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec9:3882/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:122 errors:0 dropped:0 overruns:0 frame:0
TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:32617 (31.8 KiB) TX bytes:5157 (5.0 KiB)
Interrupt:19 Base address:0xd020
eth1 Link encap:Ethernet HWaddr 08:00:27:90:B5:A0
inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe90:b5a0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:240 (240.0 b) TX bytes:746 (746.0 b)
Interrupt:16 Base address:0xd240
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6390 (6.2 KiB) TX bytes:6390 (6.2 KiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) -
Unfortunately for what I do for a living I can't use a mac, cannot WAIT till they do become compatible or I just switch professions!
I have adobe 7Pro because I MUST create PDF documents for my business, however when my laptop crashed for the 3rd time in less than a year and I was NOT about to pay HP $400 to reboot it, instead I had fun and smashed it (like in Office Space) and went out and bought a new Sony Vaio. This laptop is nice and all however now ALL new computers come with Gates newest form of a rip off, VISTA, which had so many issues they release a new update for it every day and professional companies wouldn't touch it, so they FORCED it on us small business owners and personal computer users, such CRAP! (If you notice all large corporations use XP, there is no Vista for large corps, there's a reason for that...
The people that do NOT have the $ to keep upgrading and paying for FIX ITS online from some unknown who has figured a work around are forced to use this crap!!! I'm BEYOND anoyed... ANYWHO I am installing my adobe 7pro and every time I open it I get asked to "ACTIVATE AGAIN" so I call in to get a NEW Activation code and a minute later it does it AGAIN... SOOO, I get Tech support and the IDIOT in India literally READS to me the following statements:
"Adobe 7 is not compatible with Vista"
I tell him, that's a lie because my friend uses it on vista.
He proceeds to READ to me "If you are not satisfied with that answer, then acrobat no longer supports Adobe 7". WTF?!?!? If I am not SATISFIED with that answer!??! aparantly he was NOT supposed to read THAT part!!! Laughing I proceed to tell him to piss off and hang up on him because I am SOOO tired of all these damn AMERICAN companies outsourcing their customer service to some 3rd world country where they pay these people $5 a week and have them just read from a ******* script for your problems, that is NOT technical support, that's BULL CRAP! I know 4 yr olds that read english better!!!
I am sick and tired of it... I might just take advantage of the 14 day return policy and go to Apple and buy a mac next week and change my profession sooner than I had planned JUST TO AVOID USING THIS CRAP!!! ADOBE YOU SUCK!!! Microsoft SUCKS!!!
If you run into this problem do what I am doing, go to Apple and buy a mac, we need to stand up against all this and pay attention to the COMMERCIALS that are VERY TRUE and drop Microsoft, IBM, anything Gates related and stop using their products!!!Thanks Mike!
I'm just so frustrated, its bad enough my other laptop wasn't even 2 yrs old
yet and I've spent $800 to have it fixed twice already, this 3rd time I was
DONE... so I moved onto Sony, but this Vista just is making my life a living
hell, I just spent a fortune on the laptop, and now I have to buy Adobe 9
when my adobe 7 isn't even 2 yrs old... ugh... its just very frustrating and
nerve racking and is costing more than I make in a week in this business
(real estate processing)... I should sell Microsoft for a living, I'd be a
millionaire!
My husband's Mac has been through hell and back physically, is 5 yrs old and
we've never had to take it in for any upgrades or issues, its SO easy to
use... why can't Microsoft be the same?!?!
Thanks for your input and for being understanding of my frustration, I bet
you see those often! LOL -
Error message: File is not compatible with this version of Photoshop
When I try and reopen a psd file I have created, I get the message "Could not complete your request because the file is not compatible with this version of Photoshop"
Used to get this on occasional files using CS2, have now started getting it on CS3 files. The only way to get round it is to redo the work!
Am using Photoshop CS3, V.10 on a G5, OSX 10.4.11. Which is connected to a PC network.Ran into the same message on files created by one of our designers. His computer needed a "cleansing" to stop corrupting files. Files were actually being corrupted locally, so it wasn't only a server issue...at least in our case. One thing that we did that "sort of" worked...we transferred the file to a PC and ran a shareware utility that repairs PSDs (Advanced PSD Repair Software). It said it repaired the file successfully, BUT it separated the files into a couple of hundred individual documents. Each layer and layer mask was a separate file. I didn't see any setting to recover as a composed file so I guess this is just how it works. If your file is not heavily layered and complex, I guess this might work for you, but, like I told the designer, I ain't goin' in there and reconstructing your layers. =) I know this doesn't help if you don't have access to a PC with Photoshop loaded in it, but thought this might help some poor soul along the way. Good luck...
-
AD Server does not Sync with another AD
My problem is as title, previously my server encounter DNS issues, but after delete all the event log and restart the event log is tested good. But some how now the AD do not sync.
Here is the DCDIAG
C:\Users\sysop>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = Server-DC01
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\Server-DC01
Starting test: Connectivity
......................... Server-DC01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\Server-DC01
Starting test: Advertising
......................... Server-DC01 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... Server-DC01 passed test FrsEvent
Starting test: DFSREvent
......................... Server-DC01 passed test DFSREvent
Starting test: SysVolCheck
......................... Server-DC01 passed test SysVolCheck
Starting test: KccEvent
......................... Server-DC01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... Server-DC01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... Server-DC01 passed test MachineAccount
Starting test: NCSecDesc
......................... Server-DC01 passed test NCSecDesc
Starting test: NetLogons
[Server-DC01] User credentials does not have permission to perform this
operation.
The account used for this test must have network logon privileges
for this machine's domain.
......................... Server-DC01 failed test NetLogons
Starting test: ObjectsReplicated
......................... Server-DC01 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,Replications Check] Inbound replication is
disabled.
To correct, run "repadmin /options Server-DC01 -DISABLE_INBOUND_REPL"
[Replications Check,Server-DC01] Outbound replication is disabled.
To correct, run "repadmin /options Server-DC01 -DISABLE_OUTBOUND_REPL"
......................... Server-DC01 failed test Replications
Starting test: RidManager
......................... Server-DC01 passed test RidManager
Starting test: Services
Could not open NTDS Service on Server-DC01, error 0x5 "Win32 Error 5"
......................... Server-DC01 failed test Services
Starting test: SystemLog
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:28:32
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:40
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:41
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:41
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:42
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:44
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:45
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:47
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:48
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:49
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:50
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:51
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:51
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:52
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:53
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:54
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:55
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:56
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:28:57
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:29:33
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:31:00
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:31:11
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:31:19
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:31:20
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:31:21
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:31:22
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:31:23
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:31:26
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 09/05/2014 13:31:27
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:46:02
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:48:14
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:53:15
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x40000004
Time Generated: 09/05/2014 13:53:15
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:53:17
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 13:53:26
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:01:03
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:11:51
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:12:52
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:13:25
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:14:10
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:15:10
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:16:05
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x80000003
Time Generated: 09/05/2014 14:17:57
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
......................... Server-DC01 failed test SystemLog
Starting test: VerifyReferences
......................... Server-DC01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dunhambush
Starting test: CheckSDRefDom
......................... dunhambush passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dunhambush passed test CrossRefValidation
Running enterprise tests on : dunhambush.dunham-bush.com
Starting test: LocatorCheck
......................... dunhambush.dunham-bush.com passed test
LocatorCheck
Starting test: Intersite
......................... dunhambush.dunham-bush.com passed test
Intersite
Here is the IPCONFIG
C:\Users\sysop>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection 7:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 172.16.252.1
Subnet Mask . . . . . . . . . . . : 255.255.252.0
Default Gateway . . . . . . . . . : 172.16.252.254
Ethernet adapter Local Area Connection 1:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 8:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :Hi All,
Yes, this issues server is recover by using image. "DSA not writable" value in regedit is 4. It is only way to resolve this issues by using USN
rollback?
After doing the demote of the DC will the policy will erase too?
Another question, after demote the DC, what i need to do is create a new global catalog. Will the policy will copy from another server?
Thank.
Recovered by using an image? Unfortunately, that's not supported with anyting other than a Hypervisor (HyperV, VMware, Infoblox, etc), and an operating system (Windows 2012 or newer), that supports the VM-GenerationID attribute. Otherwise, for versions that
don't support it, once a DC is in a rollback state, forget it.
As I've suggested, and as Meinolf also suggested, just run dcpromo /forceremoval and clean up the database, rebuild the DC from scratch (you can use a SYSPREPPED image if you like), and re-promote it. It's quicker, less of a hassle and no headaches.
As for DHCP on it, you can export the database if you like, and re-import it after you re-promote it.
Move a DHCP Database to Another Server
http://technet.microsoft.com/en-us/library/dd183705(WS.10).aspx
For future reference, please use supported AD backup methods.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
How to make a one-color fill images with masks in documents from our multiple layers ?
Hello everyone!
I`m to open PSD document with same layers. I need to:
1. Save the jpg file (preview) in a certain place
2. All layers with masks to make one-color fill instead of images with masks.
Thanks
This is way ?
var theLayers = collectLayers(app.activeDocument, []);
alert (theLayers.join("\n"));
function collectLayers (theParent, allLayers) {//---------------------------------------------------
if (!allLayers) {var allLayers = new Array}
else {};
for (var m = theParent.layers.length - 1; m >= 0;m--) {
var theLayer = theParent.layers[m];
if (theLayer.typename == "ArtLayer") {
var bar = new Array;
bar = theLayer.bounds
l0= Math.abs(this.app.activeDocument.width - theLayer.bounds[2] - theLayer.bounds[0]);
l1= Math.abs(this.app.activeDocument.height -theLayer.bounds[3] - theLayer.bounds[1]);
if((l0+l1)>0) { // layer mask is set
// delete this layer
//create new layer
//create new mask from array bar
//fill selection
allLayers.push(theLayer);
return allLayersI may not quite follow.
Would you mind posting an example (a screenshot with the Layers Panel visible for example) and an overview of the resulting images you want to produce? -
Key does not correspond to mask: T-0000-0-0-00-00-00
Hi,
I am trying to reverse FI JV & MIRO doc through FB08 and MR8M, But system through the error u201CKey does not correspond to mask: T-0000-0-0-00-00-00u201D at the time of reverse the document, even I canu2019t use any WBS element as cost object in that document.
Please help to resolve the issue.
Regards,
MahendraHi mani,
PLz check details error
Key does not correspond to mask: T-0000-0-0-00-00-00
Message no. CJ609
Diagnosis
The key that you entered for the project definition or the WBS element does not have the same length as was defined in the coding for one section. The project coding determines the rule which governs how a project number or WBS element key is set up.
Example
In Customizing for project coding, the following mask has been defined for projects that begin with A: /00-XXX-000.
From the number A45ABC555 the system edits the number to create: A/45-ABC-555.
In this case the system will not accept the following entries for the project number:
A45ABCXYZ
A4567ABC555
System Response
Processing stopped.
Procedure
Enter the key in its proper form: T-0000-0-0-00-00-00.
Use 0 for numerical characters and X for alphanumerical characters.
Enter the project identifier without separating characters (for example, AA45ABC555 statt A/45-ABC-555)
Procedures for the system administrator:
Check that the coding for the project definition was entered properly. Make any necessary changes.
Proceed -
I added a mask to a mpeg1 .mov file to remove the letterboxing, and now it plays at like 6-7 fps. I had no trouble with the original file, and my computer should obviously have no problems keeping up (the file is only 320x176). Any ideas on what the problem is or if this is common?
That is not an inherent problem with masking mpeg1 files. I just did it in QT 6 to a similar sized 29.97 FPS mpeg and it didn't slow down the FPS playing rate. Perhaps you should try it with a different mpeg and see if the problem is unique to that first one. If it is a general problem with mpeg then try it with a .mov file. If the slow down remains when masking then it probaably should be reported to the QT team at the feedback page:
http://www.apple.com/quicktime/products/contactqt.html
Maybe you are looking for
-
Aperture 3.0.1 - Fix the crashing bugs now Apple!
I'm coming from Aperture 2 and was so excited about the new brushes features that I had to buy version 3 straight away. What a mistake that was! I can't run this version for more than about 5 mins (while using the new brushes feature) before the appl
-
User specific default layout in BCS
Dear all, We set a default layout in BCS for all users. Know I wonder if it is possible to set a different default layout (in Total Records) for a certain group of user? Any one an idea? Regards, Oliver
-
Mandatory check failed for attribute process type of business object
Hi Guys, Im facing an error with the Mandatory check failed for the attribute process type of the business object activity. I have the subscription business transaction customizing subscription assigned and the transaction types are visible when I
-
Field Symbol to internal table
Hi all, I need to fill in a table without konwing in advance its structure. The solution is to use a field symbol and assign its content and <b>that works</b>. DATA : TAB_DATA TYPE REF TO DATA ... FIELD-SYMBOLS: <fs> TYPE ANY TABLE ... ASSIGN tab_dat
-
I can't read the text in my Acrobat pro fill forms fields
I used to be able to render text with my acrobat pro, now the function is missing. I can't read what people put in the fields I create in my forms if they don't fill it out with acrobat when they email them back. This didn't used to be the case. On