Vipca not starting up on running root.sh

Database : 10.1.0.3 + OCFS2
Operating System : Redhat Linux 4 Update 3(32 bit)
Issue :
VIPCA is not starting up while running root.sh at the end of database software installation . i am getting the following error
i686
clsrcgetcmd()(Native: listNetInterfaces:[4])
[clsrcgetcmd()(Native: listNetInterfaces:[4])]
any suggestions on this issue ?

Sorry for the late reply.The contents of /root/.bash_profile is as follows.
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
export ORACLE_HOME=/opt/oracle/product/10.1.0/db_1
export ORA_CRS_HOME=/opt/oracle/product/10.1.0/crs_1
export PATH=$PATH:$ORA_CRS_HOME/bin

Similar Messages

Why is Firefox 4 "running", not start up; but, running so agonizingly slow?

Firefox 4 is running, not start up; but running agonizingly slow! It is absolutely infuriating-the previous version was much faster than this one-what is going on?

I have the same problem. It isn't only that it is running slow but when I am typing it is as if it pauses and then the words catch up. Also going from tab to tab there is a pause. I have high speed and it is almost as bad as being on dialup again. How do we fix this? At least before the update it ran better.

My iMac will not start up after running on Yosemite since Beta 4

Hi!
I have successfully been running Yosemite since the Beta 4 on my late 2012 iMac (se spec below). But I did notice that the boot process delayed for some time after approx ⅓ of the progress line was passed.
Today it did not pass this point. I had it running overnight, but it would not start up in normal mode.
It does start in safe mode.
I have run diskrepair
I have unplugged all peripherals
I have run the Apple Diagnostics (or AHT), no problem there whatsoever.
Is there anything else I can do except reinstall Yosemite or go to an apple workshop for repair??

I have the same problem (and have posted it elsewhere) and I have already rolled the system back to Mavericks to keep working. That seems to be he only course open for now, but will leave us with an increasingly obsolete system and future problems with new/updated apps. Not only that, but my iMac has plummeted in value.
Faced with a £1000 12-month old iMac that can't be updated, I seem to have an expensive paperweight and am beginning to regret the unkind things I said about Microshaft.
A solution is still needed, and none seems to be forthcoming from Apple.

EP not starting, Error : Dispatcher running but no server connected

Hi all,
i am getting the following error when i try starting the EP.
Dispatcher running but no server connected
Details : No details availaible
and on the mmc i see that for One of the instancce . the process List has 3 processes
1) msg_server.EXE
2) disp+work.EXE
3) igswd.EXE
all are shown as running but seems there is some problem with disp+work.EXE as it is being shown in yellow colour and not green..
please let me know if any one of you have faced this problem.
i tried restarting the server and machine but it din work
thanks,
rohit

Hi Bryan ,
i had made few changes in EP module and since then my server is not starting properly. i am not able to login to EP module. so i made changes in UME using configtool.
I changed DataSourceConfiguration to use dataSourceConfiguration_r3_rw.xml and used user J2EE_ADMIN . since then while server comes up it gives some error related to service jms_provider.
so before putting the trace here , can any one tell me which is the default dataSourceConfiguration ? and also what user do i specify ??
i just want to fall back to default datasourceconfiguration
here is the current trace when using dataSourceConfiguration_r3_rw.xml
stdout/stderr redirect
node name : server0
pid : 5276
system name : N4S
system nr. : 01
started at : Sat Nov 04 17:37:33 2006
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 4632] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Loading: LogManager ... 4015 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 125 ms.
Loading: ThreadManager ... 63 ms.
Loading: IpVerificationManager ... 15 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 610 ms.
Loading: LockingManager ... 156 ms.
Loading: ConfigurationManager ... 5797 ms.
Loading: LicensingManager ... 62 ms.
Loading: CacheManager ... 407 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (31 ms).
Service cross started. (47 ms).
Service memory started. (16 ms).
Service timeout started. (859 ms).
Service file started. (1547 ms).
Service trex.service started. (109 ms).
Service p4 started. (10062 ms).
Service classpath_resolver started. (250 ms).
Service caf~eu~cc~api started. (23265 ms).
Service jmx_notification started. (93 ms).
Service userstore started. (0 ms).
Service log_configurator started. (31093 ms).
Service locking started. (16 ms).
Service http started. (828 ms).
Service naming started. (1704 ms).
Service ts started. (203 ms).
Service javamail started. (500 ms).
Service licensing started. (32 ms).
Service failover started. (140 ms).
Service appclient started. (78 ms).
Service jmsconnector started. (79 ms).
Service iiop started. (765 ms).
Service connector started. (219 ms).
Service webservices started. (1235 ms).
Service deploy started. (29500 ms).
Service configuration started. (78 ms).
Service MigrationService started. (31 ms).
Service bi~mmr~deployer started. (109 ms).
Service dbpool started. (4344 ms).
Service caf~eu~gp~mail~cf started. (63 ms).
Service com.sap.security.core.ume.service started. (5875 ms).
Service caf~eu~odi~mnuacc started. (68281 ms).
Service caf~runtime~connectivity~impl started. (45359 ms).
Service security started. (7828 ms).
Service applocking started. (125 ms).
Service keystore started. (1547 ms).
Service classload started. (1343 ms).
Service shell started. (235 ms).
Service tc~sec~securestorage~service started. (187 ms).
Service tc~eCATTPing~service started. (31 ms).
Service jmx started. (2094 ms).
Service servlet_jsp started. (2328 ms).
Service caf~um~metadata~imp started. (94 ms).
Service telnet started. (453 ms).
Service ssl started. (94 ms).
Service caf~um~relgroups~imp started. (438 ms).
Service basicadmin started. (1391 ms).
Service adminadapter started. (469 ms).
Service prtbridge started. (1625 ms).
Service tc~sec~wssec~service started. (282 ms).
Service dsr started. (515 ms).
Service com.adobe~DocumentServicesConfiguration started. (1000 ms).
Service com.adobe~LicenseService started. (1234 ms).
Service ejb started. (1438 ms).
Service apptracing started. (390 ms).
Service tc.CBS.Service started. (46 ms).
Service monitor started. (1828 ms).
Service caf~eu~gp~model started. (31 ms).
Service CUL started. (4422 ms).
Service tc~eu~jwf~ui~wizsvc started. (1781 ms).
Service com.sap.portal.pcd.gl started. (7609 ms).
Service webdynpro started. (10172 ms).
Service com.sap.portal.prt.sapj2ee started. (2500 ms).
Service rfcengine started. (5688 ms).
Service caf~eu~er~service started. (2093 ms).
Service com.adobe~DataManagerService started. (7953 ms).
Service tc~sec~destinations~service started. (10328 ms).
Service com.adobe~TrustManagerService started. (750 ms).
Service pmi started. (391 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (2110 ms).
Service com.adobe~DocumentServicesDestProtoService started. (672 ms).
Service developmentserver started. (9891 ms).
service jms_provider ================= ERROR =================
Cannot start service DQE; it has hard reference to service jms_provider which is not started.
Service tc~sec~vsi~service started. (1187 ms).
Service sld started. (13172 ms).
Service com.adobe~DocumentServicesBinaries2 started. (1657 ms).
Service com.adobe~PDFManipulation started. (18609 ms).
Service tc.monitoring.logviewer started. (28031 ms).
Service com.adobe~FontManagerService started. (36906 ms).
Service com.adobe~XMLFormService started. (6938 ms).
ServiceManager started for 138203 ms.
Framework started for 150360 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel March 23, 2006 18:47 GMT
### Excluding compile: com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
Nov 4, 2006 5:42:09 PM ...p.portal.ivs.semantic.systemLandscape [SAPEngine_Application_Thread[impl:3]_26] Fatal: Failed to create initial folders for system landscape
service jms_provider ================= ERROR =================
Nov 4, 2006 5:45:14 PM ...services.webdynpro.WebDynproContainer [SAPEngine_System_Thread[impl:5]_88] Fatal: Error occured during preparation of application startup.
Here is the trace.

Dreamweaver mx 2004 will not start on Mac running OSX 10.6.2

Right after installation I go to run Dreamweaver (or any of the mx 2004 suite), the item bounces, then dissepears and does not start up. I looked in the console and found the following item... "translate: MACH_RCV_PORT_CHANGED - INVALID POINTER, RCV BUFFER NOT SWAPPED".
Now, I have found hundreds of people on the internet having the same issue, and the standard replies given, (by the way, never work!). Re-installing does not work, clearing out the preferences does not work, re-installing the OS is not an option (I have a brand new laptop with OSX 10.6.2).
I did see that Adobe had received this error question, but they have removed it from their site. It seems that they do not want to address this issue for some reason. I would like to know how to fix this error. Let's put it this way, Anyone who buys a new Mac, then installs their MX Studio 2004, it will NOT work under any circumstances. I have seen hundreds of other people with the same problem, and never get it resolved. So, do I toss dreamweaver out for good or is there a fix that Adobe will allow anyone to talk about?

Re: "Alternatively, if you don't want to do this, the only other option I am aware of to solve this problem is to buy software like Fusion or Parallels and install Leopard (10.5) as your OS and run MX 2004 within a virtual environment."
Just so this is perfectly clear..... NO CAN DO
I have VMWare and Parallels on a Brand New MacBook Pro. It came with 10.5.11 and that is absolutely the OLDEST Mac OS I can install in a virtual environment. Believe me, I tried Tiger, Panther and Jaguar to no avail.
If the Mac in question came loaded with Snow Leopard, it has a "Snow Leopard or better" firmware write on the logic board and it will not allow an older OS to be installed.... even in a virtual environment, unless there's a secret that nobody I've spoken to in support for both VM clients knows.

Firefox will not start, advising already running, but WIN 7 Task Mgr says nothing else running. This is big prioblem!!!

Can't get Firefox started. Instead advice given that it's already running and to close it down. BUT, Windows 7 Task manager advises that neither Firefox nor anything else is running. The only way I can remedy the problem is to restart computer, and I am getting a bit weary of this. I've had this problem before I recently updated Firefox.. I never have this problem with Explorer or AOL, both of which are and always concurrently running just fine.

'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''. 
This is not a cure but will make it easier if Firefox locks up.

11gR2 : Failed to start EVM while running root.sh in Node1

DB verision:11GR2
Platform : Solaris 5.10 (Amd64)
I've reached the last step in the installation in Node1
# ./root.sh
.............all messages say succeeded till here............
CRS-2676: Start of 'ora.crsd' on 'hudson1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'hudson1'
Start action for daemon aborted
CRS-2674: Start of 'ora.evmd' on 'hudson1' failed
CRS-2679: Attempting to clean 'ora.evmd' on 'hudson1'
CRS-2681: Clean of 'ora.evmd' on 'hudson1' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/grid/bin/crsctl start resource ora.evmd -init
Start of resource "ora.evmd -init" failed
Failed to start EVM
Failed to start Oracle Clusterware stackA search in OTN and MOS returned nothing. Any idea how i could diagnose this issue?

Hi,
Check this note on MOS.
*Troubleshooting 11.2 Grid Infastructure Installation Root.sh Issues [ID 1053970.1]*
A Troubleshooting Guide is provided to assist in debugging a specific issue. When possible, diagnostic tools are included in the document to assist in troubleshooting.
Regards,
Levi Pereira

HP dv3-2000 audio service not start after i run uniblue powersuite. event log says can't find path.

after i run uniblue powersuite to clean up my registry, speedup my pc and update my drivers, I cannot start my dv3-2000 laptop. After I updated the BIOS, following the suggestion on the forum, I can get the vista start but no sound. I then checked the event log which says the audio service cannot start because it can't find the path specified. How can I solve this problem?

If the printer is connected USB to the Windows 7 machine, what you can do is share it to the network (assuming the XP computer is also connected to the same network). This way the XP machine can see the printer on the Windows 7 computer and install it. The only drawback is that the Windows 7 computer will need to be powered on for the XP computer to be able to see and print to it. I have linked a third party site below for instructions on how to do this.
http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

MSI Gaming app will not start up or run

I just installed a new MSI GTX 960 Gaming 4G and also installed the MSI gaming app. When I click on the app to open it appears in my notification window, but as soon as I mouse over the icon it disappears. The app stops running. I have uninstalled and re-installed like 12 times and restarted the computer 15 times. I'm kind of a noob when it comes to using new stuff so any help would be nice. Thanks

It's an issue with Gaming APP that is currently not fixed. Open a ticket with MSI support to add more cases for MSI to check and find the problem: >>How to contact MSI.<<

New X220 will not start up when running on battery

I just received my new Thinkpad X220 4286CTO and found that when the computer is unplugged, I cannot start the computer after hibernation or shutting down.
The battery will charge just fine, and the laptop can run on battery just fine (drained from 100% to about 82% in two hours of use). When running on battery only, the computer can wake up from sleep. However, if I hibernate or shut down and then try to turn it on when unplugged, there is no response (no lights or anything). Then, when I plug the computer back in, it will turn on immediately (without pressing any keys), which surprised me. During this whole time the battery was between 80 and 100% charge.
One other quirk I noticed is that if I turn the laptop back on very quickly (press the power button within 5 seconds of finishing hibernating or shutting down), it will come back on, but if I wait more than 5 seconds, it is completely unresponsive until I plug it back in.
Has anyone else had this problem or know how to fix it? I will probably just send it back for possible motherboard / battery replacement, but I was wondering if there was anything I could try to fix it and avoid this. Thanks!

I think you need to call support. Sounds like a defective battery or motherboard, as you suggested.

Listner is not start-multiple instace

hi,
I have created two oracle home , one is on D:\ and other is on C:\ . D drive instance is running fine .C dirve instance its not running.
oracle services is pointing to C dirve executiable path, and while i tried to start the listner its not start. both are running different ports.
while i try to stat listner
LSNRCTL> start listner_hrdw
Starting tnslsnr: please wait...
Failed to start service, error 0.
TNS-12560: TNS:protocol adapter error
what is the problem?
Thanks.

yeah their is one reason, every week end one instance will down .
So at that time other isntance have to up.
I am using same oracle version.
thanks,

Firefox does not start

i am using Duke 64 bit. 50% of the times firefox just does not start. i had the same problem in 2.0.0.3 and now it is 2.0.0.4 but problem is not solved. when i use command "firefox" in X Terminal, cursor just goes to the next line without doing anything and when i do "ps -x" i can see firefox was *already* running but i do not see any windows of firefox. STRANGE.......this is from my terminal:
[arnuld@arch ~]$ ps -x
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
PID TTY STAT TIME COMMAND
6042 tty2 S 0:00 -bash
6050 tty2 S+ 0:00 /bin/sh /usr/bin/startx
6066 tty2 S+ 0:00 xinit /home/arnuld/.xinitrc -- -auth /home
6073 tty2 S 0:00 wmaker
6074 tty2 S 0:00 wmaker --for-real
6699 ? Ss 0:00 /bin/sh /opt/mozilla/bin/firefox
6703 ? S 0:00 /bin/sh /opt/mozilla/lib/firefox-2.0.0.4/r
6708 ? Sl 0:00 /opt/mozilla/lib/firefox-2.0.0.4/firefox-b
6714 ? S 0:00 /usr/lib/GConf/gconfd-2 12
6728 ? Ss 0:00 urxvt
6729 pts/0 Ss 0:00 -bash
6733 pts/0 R+ 0:00 ps -x
see, firefox is already running but i do not see any firefox window in my Windowmaker. i have also tried "wmii" and "larswm".
[arnuld@arch ~]$ firefox
[arnuld@arch ~]$ firefox
[arnuld@arch ~]$ firefox
[arnuld@arch ~]$ firefox
NOTICE: it does not do anything here :-(
[arnuld@arch ~]$ ps -x
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
PID TTY STAT TIME COMMAND
6042 tty2 S 0:00 -bash
6050 tty2 S+ 0:00 /bin/sh /usr/bin/startx
6066 tty2 S+ 0:00 xinit /home/arnuld/.xinitrc -- -auth /home/arnuld/.serverauth.6050
6073 tty2 S 0:00 wmaker
6074 tty2 S 0:00 wmaker --for-real
6699 ? Ss 0:00 /bin/sh /opt/mozilla/bin/firefox
6703 ? S 0:00 /bin/sh /opt/mozilla/lib/firefox-2.0.0.4/run-mozilla.sh /opt/mozilla/lib/firefox-2.0.0.4/
6708 ? Sl 0:02 /opt/mozilla/lib/firefox-2.0.0.4/firefox-bin
6714 ? S 0:00 /usr/lib/GConf/gconfd-2 12
6728 ? Ss 0:00 urxvt
6729 pts/0 Ss 0:00 -bash
6746 ? Ss 0:00 emacs
6795 pts/0 R+ 0:00 ps -x
[arnuld@arch ~]$
i have to use "kill -9 PID" to kill all those 3 firefox-processes. this happens with me everyday when i try to access firefox. any solution ?

ourcach wrote:
My firefox does not start.
when i run it it asks if i wawnt to start a new session and when i click on any of the choices it hangs and nothing happens.
even in safe mode when it is supposed to start it stil hangs and no window is oppened...
this happened when i updated to firefox 2.0.0.4...
Make sure firefox is actually stopped (check "ps axww" output for it). Kill it if it's still running somewhere.
Check your firefox profile area for files named "lock" and ".parentlock". Delete them if you find any.

VIPCA does not start from root.sh

Hi all,
I've a problem in installing RAC 10g on ia64 architecture.
S.O.: RH Enterprise Linux AS 2.1
Oracle CRS install completed successfully.
The problems came up during DB installation when I need to run root.sh script that should automatically invoke VIPCA.
Here's what I see when I execute root.sh. :
[root@rx5670 root]# /u01/app/oracle/product/10.1.0/db_1/root.sh
Running Oracle10 root.sh script...
\nThe following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.1.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
\nCreating /etc/oratab file...
Adding entry to /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Exception in thread "main" java.lang.UnsatisfiedLinkError: allocHASContext
at oracle.ops.mgmt.has.HASContextNative.allocHASContext(Native
Method)
at oracle.ops.mgmt.has.HASContext.<init>(HASContext.java:93)
at oracle.ops.mgmt.has.HASContext.getInstance(HASContext.java:223)
at oracle.ops.mgmt.has.ClusterUtil.<init>(ClusterUtil.java:46)
at
oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:164
at
oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:213
at oracle.ops.mgmt.cluster.Cluster.getNodes(Cluster.java:267)
at oracle.ops.vipca.VipCA.getNodeList(VipCA.java:532)
at oracle.ops.vipca.VipCA.processGUIArgs(VipCA.java:242)
at oracle.ops.vipca.VipCA.runApplication(VipCA.java:2141)
at oracle.ops.vipca.VipCA.main(VipCA.java:2423)
[root@rx5670 root]#
Thanks a lot,
Simone

CSSD does not start (Cluster Manager)
CSSD does not start (Cluster Manager)

CSSD does not start during root.sh execution

hi,
I am using oracle10gR2 on solaris 9 sparc.
when i start root.sh script it stops at following point.
Running Oracle10 root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.2.0/Db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Adding entry to /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
but i think this is not the complete run by root.sh script because complete execution of this script perform following tasks also.
/var/opt/oracle does not exist. Creating it now.
/etc/oracle does not exist. Creating it now.
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Oracle Cluster Registry for cluster has been initialized
Adding to inittab
Checking the status of Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
mars
CSS is active on all nodes.
Oracle CSS service is installed and running under init(1M)
I have tried to use the localconfig reset command but still it is giving same error.
I have searched through this forum but still no solution.
I have tried metalink note 314173.1 also but error is still there.
Any solution for this????

CSSD does not start (Cluster Manager)
CSSD does not start (Cluster Manager)

Graphics does not start unless I chmod a=rwx /run/user/0

Hello, I boot Arch Linux 2014.04.01 x86_64 Live CD, do
pacman -S xorg-server xorg-xinit i3 xf86-input-synaptics xf86-video-modesetting
useradd someuser ; mkdir -p /home/someuser ; chown someuser:someuser /home/someuser
su someuser ; cd /home/someuser
and put i3 in .xinitrc as per the wiki.
I run startx as someuser, but the graphic environment will not start, and in Xorg's log I read it cannot write in /run/user/0, check permission. Then I do ''chmod a=rwx /run/user/0'', and startx works.
This additional step is not mentioned in the wiki. Am I doing something wrong or missing something? Thanks,
Last edited by domike (2014-05-28 11:28:02)

domike wrote:useradd someuser ; mkdir -p /home/someuser ; chown someuser:someuser /home/someuser
Where did you get this idea? This is the problem.
Follow the wiki
Also, you realize everything you are installing and doing only remains in memory. Why are you installing all these packages? Are you going to repeat this installation and user creation at every reboot?
EDIT: something else is wrong too - but until you fix the above, it will be hard to know if it is a separate cause, or an indirect effect. /run/user/0 should not be relevant, but /run/user/1000 should be used. I suspect your method of starting X is logging out of the 'su'ed user and is dropping back to the root login that it is under. You'll likely need to change tty's to log in as your user - on a normal system you could log out of the root session and back in as your user - but on the iso I think autologin for root is set on tty1. Of course you could disable this too.
Last edited by Trilby (2014-05-28 11:44:42)

Vipca not starting up on running root.sh

Similar Messages

Maybe you are looking for