Virtual Connect Manager Status and Stacking Link Error

I have three C7000 Enclosures / chassis running on each environment, each chassis have a redundant VC (Flex-10 Enet) bay 1-2 and ( 8Gb 24-Port FC ) Bay3-4, everything seem working but there is a Domain status and stacking link errors "One or more of a domain's subsystems are not properly operating, causing serious impact to domain functions." and "Some VC-Enet modules are not properly connected via stacking links please verify stacking cable connections"

Sorry, but your question is far beyond the intended scope of the Global Consumer support forum.  I suggest posting this to the HP Enterprise business forum.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

    I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
    time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
    I see the following two entries in event viewer but have no other clue as to what is happening:
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          1/10/2014 10:48:46 AM
    Event ID:      16000
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      Charles-PC.CHARLESPOOL.local
    Description:
    The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
        <EventID>16000</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
        <EventRecordID>58</EventRecordID>
        <Correlation />
        <Execution ProcessID="2488" ThreadID="8704" />
        <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
        <Computer>Charles-PC.CHARLESPOOL.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <UserData>
        <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
          <ErrorMessage>%%2147944126</ErrorMessage>
          <ErrorCode>0x800706BE</ErrorCode>
        </VmlEventLog>
      </UserData>
    </Event>
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          1/10/2014 10:48:46 AM
    Event ID:      16010
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      Charles-PC.CHARLESPOOL.local
    Description:
    The operation failed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
        <EventID>16010</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
        <EventRecordID>59</EventRecordID>
        <Correlation />
        <Execution ProcessID="2488" ThreadID="8704" />
        <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
        <Computer>Charles-PC.CHARLESPOOL.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <ProcessingErrorData>
        <ErrorCode>15005</ErrorCode>
        <DataItemName>Parameter0</DataItemName>
        <EventPayload>
        </EventPayload>
      </ProcessingErrorData>
    </Event>

    Hi CharlesPool,
    I am assuming that the win8.1 is in-place updated from win8 .
    Maybe you need to check the state of hypervisorlaunchtype .
    If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

  • HP Virtual Connect Manager 3.15

    Hi I can't see add network connect button or copy profile button in HP Virtual Connect Manager 3.15, I can see both of them in HP Virtual Connect Manager 1.15. Has this been removed in HP Virtual Connect Manager 3.15? Regards Robert

    Hi I can't see add network connect button or copy profile button in HP Virtual Connect Manager 3.15, I can see both of them in HP Virtual Connect Manager 1.15. Has this been removed in HP Virtual Connect Manager 3.15? Regards Robert

  • About jsafe and unsatisfy Link Error?

    After I install weblogic5.1 on hp-unix11.0,I can start it,but I found a problem
    with the process of the start:some exception report:jsafe...,and unsatisfied Link
    Error?I wonder what's the matter?
    Any answer will be appreciate!thanks

    Make sure that you have the latest service pack. You can safely ignore this
    message.
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    "matileean" <[email protected]> wrote in message
    news:3ad27036$[email protected]..
    >
    After I install weblogic5.1 on hp-unix11.0,I can start it,but I found aproblem
    with the process of the start:some exception report:jsafe...,andunsatisfied Link
    Error?I wonder what's the matter?
    Any answer will be appreciate!thanks

  • Cisco Unified Connection Manager IM and Presence installation fails

    Hello everyone, we are trying to install laboratory uses the Cisco Unified Connection Manager IM and Presence version10.The installation fails after a warning where there is a popup that asks if it is the first node of the configuration.From the installation manual is not clear if this product should be installed in a cluster architecture (publisher-subscriber).What should be the steps to follow?
    Something has to be done on the server where we have  installed theCisco Unified Connection Manager?
    In attachement the screenshot with popup.
    Thanks in advance
    Oronzo Lezzi

    Hi!
    Hello everyone, we are trying to install laboratory uses the Cisco Unified Connection Manager IM and Presence version10.The installation fails after a warning where there is a popup that asks if it is the first node of the configuration .
    What should be the steps to follow? vSwitch and ESXi config
    1) cisco call manager installed as a publisher.
    2) cisco unified connection manager IM & presence add as a subscriber or publisher.

  • The hyper-v virtual machine management service encountered an unexpected error logon failure 0x80070569

    I dont understand why Microsoft people can't make things simpler
    They are LITERALLY MOTHER F%^%RS
    Bill Gate and his team need to learn hot to F^&&IN make things.

    I agree, the use of profanity is completely unnecessary, we've all been in the stressful situation before, it still doesn't call for it.
    The network you're receiving an APIPA IP on, is it the virtual switch you setup when adding the Hyper-V role?  If so you can get the warnings to go away and subsequently hide the adapter by unchecking the 'Allow host to manage this adapter' setting
    in the virtual network manager of Hyper-V manager on each node.
    Tim is also right, while disk resources are only owned by one node, you'll see the mount points for CSVs located under C:\ClusterStorage.
    More importantly, you're logon issue sounds directly related to group policy.  I had the same problem moving to Server 2012.  Yes, it's an annoying process but in the end you will have a working cluster.  I did the following steps:
    1. Install 'Group Policy Manager' on one of the nodes in your Hyper-V cluster
    2. Log on to the node you installed it on with a Domain Admin or appropriately endowed account that can edit the GPO relating to 'Logon as a service right'
    3. Edit the GPO where you specify who can logon as a server, OR if you don't have one, make a new one and link it to the OU with the Hyper-V nodes
    4. Add permission to that right for 'NT Virtual Machine\Virtual Machine Group', save and exit
    5. As an optional step I would reboot the nodes so you make sure they get it
    The problem here is that security group ONLY exists on servers that have Hyper-V installed on them.  If you add the group on a machine that has it to the GPO, the SID for the group is saved and each Hyper-V host will know what group that is.  The
    problem you're having right now is most likely related to a GPO changing 'Logon as a service right' to your needs and setup in Group Policy.  When a Hyper-V node starts up, it automatically adds the right for that group to the local security policy, however,
    group policy's auto refresh will remove it after a certain amount of time.

  • Time management status and Payroll

    Experts,
       We are using TMS as 9 (Time evaluation of planned time) in IT0007. What does it mean in TM?
       What is it's impact in Payroll.
    Regards
    Sk
    Edited by: s k on Nov 17, 2008 10:24 AM

    You can assign the following Time Management statuses in the Planned Working Time infotype (0007):
    Time evaluation with planned times (0): Employees with this status are not selected for time evaluation. They cannot therefore be processed in time evaluation. The employeeu2019s time wage types are determined in Payroll time data processing.
    Time Management Status for processing time data in Time Evaluation and passing on time wage types formed there to Payroll
    Time evaluation of actual times (1) and Time Evaluation PDC (2): Employees with these statuses have all their actual times, that is, all attendance and absence data, recorded*. It makes no difference whether attendance times are recorded at time recording terminals or in the Attendances infotype (2002).
    Time evaluation with planned times (9): These employees have only the deviations from their work schedule recorded for them. The employeesu2019 planned working times from their personal work schedule are used as the basis for time evaluation.
    Time Management Status for processing time data in Time Evaluation without passing on time wage types formed there to Payroll
    Time evaluation without integration with Payroll (7): You use this status to run time evaluation to handle special time accounts u2013 to accrue absence quotas, for example. It makes no difference whether all of the employeesu2019 actual times are recorded or only the deviations from the work schedule.
    The system stores the results of this time evaluation run in cluster B2, which enables you to run reports on the data, for example. The results are not passed on to Payroll. The time data processing part of Payroll treats the employees as if they had the time management status No time evaluation (0).
    External services (8): Status for external employees. It makes no difference whether all of the employeesu2019 actual times are recorded or only the deviations from the work schedule. The results of time evaluation are transferred to Materials Management (MM-SRV), and are not passed on to
    and also check the feature TMSTA once  in peo3
    Edited by: Sikindar on Nov 17, 2008 3:01 PM

  • PLM7.02: Status & Release Management/ Status and Action Management

    Hello,
                    I´d like to know if anybody worked with Status & Release Management. And has some example to how we can customize: SAM (Status and Action Management) in “Define Status Scheme” transaction.
                    How it´s works the relationship with: Status: Attributes, Status: Field values, Scheme Definition, Attributes: Definition.
                    I´ll appreciated if you could give me a simple example of this functionality.
                    Thanks in advance.
                    Best Regards from Brazil.
                    Rodrigo Arai

    Hi Rodrigo,
    in a nutshell:
    - you can define status network based on objects (w.g. material)
    - Define Attributes: you can define attributes like DELETION_ALLOWED or LOCKED_FOR_CHANGE and you can implement preconditions in custom classes when should it happen
    - Define Status Field: you can define some fields which are related to the status. e.g. in recipe management RCP_USAGE
    - Status: you can define the different statuses (e.g. in process, completed..) with attributes
    - Scheme Definition: you can define the logic between statuses. E.g. you would like to swith from status In Process to Completed and from New to In Process. Then switching from New to Completed is not possible for the user.
    - Subobject Type Scheme only applied if you have subobjects
    here you can find the customizing documentation, there are some examples as well:
    Define Status Scheme
    Use
    In this Customizing activity, you define statuses and status schemes for object types and corresponding attributes.
    For each status, you can define which attributes are allowed to be set for an object with this status assigned.
    The status scheme defines the initial status and the possible transitions from one status to another.
    Activities
    You define status schemes as follows:
    1. Select the required object type and enter the following:
    a) An identifier
    b) An object type class (Note: this class should implement the interface class)
    c) A subobject type search help
    The search help provides a list of all possible subobject types. This feature enhances the usability while  maintaining status schemes at subobject-type level.
    d) If the
    Status
    tab page shall be visible on the PLM Web UI, select the
    Status Tab
    checkbox
    Status and action management is a reusable object. It has been modeled as a dependent object. The prerequisites to enable status and action management for any new objects are:
    Add the Status and Action Management tab page on the UI.
    Enable the Status Tab checkbox in this Customizing activity.
    2. Select the required object type and define the following attributes for it:
    a) An object type
    b) An attribute identifier
    c) An attribute description
    d) An attribute type
    e) Select a precondition class (Note: This class should implement the '/PLMB/IF_SAM_PRECONDITION' interface)
    3. Define the technical status field name.
    When you change the object status, the system updates the technical status field names to the new values made in these settings.
    4. Select object type and define corresponding statuses.
    a) Select the status and define the corresponding object type, an identifier, description, and status icon.
    Note:
    You cannot define new statuses for materials and material BOMs. For these objects, all values should be transferred from the back-end system.
    You can import the status values from the back-end system as follows:
    b) Select the object type that represents a material or a MatBOM.
    c) Select
    Status
    in the dialog structure.
    d) Choose the
    New Entries
    pushbutton.
    e) Choose the
    Import Status
    pushbutton.
    Note
    The system imports the following status values into SAM:
    For material: the
    X-plant matl status
    (cross-plant material status)
    For MatBOM: the header status
    Although you cannot change the imported value for a material or a MatBOM, you can change its name and description to conform to SAM terminology.
    You can differentiate between the following cases for objects whose status values are imported from the back-end system:
    The object was not created on the PLM Web UI, but in the back-end system; no SAM status scheme or status was assigned, but a status value was set in the back-end system.
    If you assign a SAM status scheme to this object later on that contains the equivalent imported status values, the SAM status value is set accordingly, even if any precondition check results of the SAM status scheme may exist.
    The object was created in the back-end system or on the Web UI and a SAM status scheme is assigned to the object on the PLM Web UI.
    If the corresponding status value is changed in the back-end system, then existing SAM preconditions for this status transition and allowed status transitions are checked. If the preconditions are not fulfilled, a message is raised and the new status cannot be saved.
    5. Specify which attributes are allowed for each object type when the chosen status is set.
    a) Select a status and open the
    Attributes
    screen.
    b) Choose an object type.
    c) Choose an attribute.
    6. Define whether values from other technical fields are affected by setting this status.
    a) Select a status and open the
    Field Values
    screen.
    b) Select an object type.
    c) Select a technical field name.
    7. Specify the status scheme. The status scheme defines the initial status and status transition for the object type. For example, below is a list of standard status schemes defined for iPPE object types.
    Assembly Header - PLM_PPEAH
    Assembly Item - PLM_PPEAI
    Product Item Variant - PLM_PPEPIV
    Product Variant - PLM_PPEPV
    You can also create schemes for the object type as follows:
    a) Specify an identifier and description for the status scheme and set one of the statuses defined above as the initial status.
    b) Select the status scheme and open the
    Transitions
    screen. Enter all possible status transitions by specifying the source (
    Status From
    ) and target status (
    Status To
    c) Select the
    Long Text
    checkbox if you want the system to open the long text editor on the
    Status
    tab in the PLM Web UI. You can use the long text editor to create notes for this transition.
    8. Define the scheme at subobject-type level by entering following parameters:
    a) Object type
    b) Subobject type (You can choose from the list of subobject types you have specified when defining the search help in step 1)
    Alternatively, you can define a default status scheme that is automatically displayed on the
    Status
    tab.
    The following statuses are included in the standard delivery:
    10 -  In Work
    20 - For Approval
    LINKED_DIR
    LINKED_MAT
    LOCKED_FOR_CHANGE
    REPLACE_PH_ASSEMBLY (only in the PLM_PPEAI assembly item and the PLM_PPEPIV product item variant)
    30 - Released For Planning
    LOCKED_FOR_CHANGE
    40 - Released
    RELEASED
    SUB_ITEM_STATUS
    The following status transitions are possible:
    FROM
    TO
    Long Text checkbox (dialog box for notes)
    10
    20
    20
    30
    30
    40
    20
    40
    20
    10
    X
    30
    10
    X
    40
    10
    X
    More on SAP help:
    Status and Action Management on the Web UI - SAP Library
    Best regards
    Tamas

  • ILO Virtual Media Manager, Arch and JVM

    At work I need to mount isos with Virtual Media Manager that comes with HP iLO. It is recommended to use at least JVM 1.4.2 and I have the newest available versions of JRE and JDK installed. It shows the java icons for while, but it doesn't work.
    I have tried downgrading to with abs but it still does not work - I have tested Java on other sites where it works fine. Anyone who has experienced a similar and problem and found a solution for it?
    I am using Arch64 btw.
    Thanks

    So there is no one here who is working with HP servers using Arch Linux?
    Could it be because iLO is incompatible with 64bit Java?

  • Trying to upgrade OS on an original iPad.  Screen is locked showing iTunes/USB cable icons.  Connected to iTunes and get an error 3014 message stating it cannot be restored and screen is locked in this mode.  How do I unlock?

    Trying to update OS on an original iPad.  Connected to iTunes -- screen is locked showing iTunes/USB cable icons.  iTunes says must restore to default settings, but receive an error message 3014 that this cannot be done.  Cannot unlock screen to use nor can I update or restore, so iPad not usable at this point.  How can I unlock screen so I can use iPad, how do I fix this error?  Latest version of iTunes is downloaded and I've followed all the instructions in regard to Windows.  I'd at least like to unlock iPad so it can be used.  Thanks.

    bummer. *Note that if you are actually running iOS 5.1.1, that's it for the iPad 1st Gen.
    Resolve iOS update and restore errors - Apple Support
    ÇÇÇ

  • Project manager premiere and AE links is there an easy way ?

    Hi,
    I would love to know if someone has a better workflow for trimming, even if you want to backup them or just duplicate them for another new project.
    I use a lot of dynamic links in my project, I keep everything really organize, so I backup my project by trimming premiere pro, collect files in AE, clean and copy with assets C4D projects, and duplicate the whole folder of audition ( I've never understand how audition manage files so I copy everything)
    But I would love just click project manager in Premiere, select my finished sequence, trim the project and create a new folder. the problem is that dynamic links arent copy.
    So is there any way to trim the whole CC projects, and what i mean with this is some function where everything on your timeline, AE projects with assets, Audition files assets, Speedgrade sessions, c4d, and premiere project is duplicate and create with everything you will need for backup or create a new project from there
    if anyone has a better workflow please let me know
    thanks

    Thanks for the suggestion. I was thinking that I would have to do that unless there was some easier automated way. I was hoping there was some automated way that I did not know about..

  • My iphone 4s is not being connected to laptop and showing an error message as it is unrecognised device

    my iphone4s is not being recognised by the laptop...it is showing an error message as unrecognised device...wat would be the problem?? plzzz help!!!

    Some clarifying questions, in hopes that the answers will help somebody help you:
    What kind of connection (USB, WiFi, Bluetooth)?
    What kind of laptop (MacBook, Windows PC; running what operating system level)?
    What kind of connection are you expecting, for what purpose?
    Was it working before, or is this the first time you have tried this combination?

  • OnPress and Text Link ERROR

    Hello guys. I am new to Flash and would like some help from you guys. I would really appreciate it. Thanks,
    So, here is the problem.
    My friend has created a flash navigation bar for me. Since I can not add links here, huhtea is the address with com.
    Now, I would like to add text links and onPress (getURL) for images in my submenu.
    I have tried all kinds of things. I have watched numerous youtube clips on this matter.
    After adding onPress codes in Actionscript 1.0 & 2.0 and checking them, everything was fine. But if I publish it, the image does not go to the URL.
    This goes for the text link as well. After highlighting the text and adding http address in the properties, everything is fine. But again, published file does not lead me to the URL.
    Can someone please help me out?
    Thanks,

    If I look at the page code of the page you say to look at, I'd say your problem lies there, and possibly in the flash file as well.  I see one url in that page that targets a local drive, which is not going to work...
      url=Link[file\:/C\:/Program%20Files%20(x86)/Yahoo%20SiteBuilder/sites/Imex/ready.html
    So it is possible you have other such links in your Flash file.  I am not able to find the swf's in that page code, and seeing as how it indicates something in the way of Yahoo Site Builder being used, there could be any number of problems in trying to go that route.
    What does the getURL code look like in your Flash file?  If you are using relative links, that might be related to the problem, especially if the Flash file is in a different folder than the web page.

Maybe you are looking for