Trying to upgrade OS on an original iPad. Screen is locked showing iTunes/USB cable icons. Connected to iTunes and get an error 3014 message stating it cannot be restored and screen is locked in this mode. How do I unlock?

Trying to update OS on an original iPad. Connected to iTunes -- screen is locked showing iTunes/USB cable icons. iTunes says must restore to default settings, but receive an error message 3014 that this cannot be done. Cannot unlock screen to use nor can I update or restore, so iPad not usable at this point. How can I unlock screen so I can use iPad, how do I fix this error? Latest version of iTunes is downloaded and I've followed all the instructions in regard to Windows. I'd at least like to unlock iPad so it can be used. Thanks.

bummer. *Note that if you are actually running iOS 5.1.1, that's it for the iPad 1st Gen.
Resolve iOS update and restore errors - Apple Support
ÇÇÇ

Similar Messages

Ipad can not be restore, shows the usb cable icon.

When I turned it on (whitout being conected to the computer) the screen shows the usb cable icon for a minute and then turns it off.
If I connect it to Itunes:
" Itunes has detectes an Ipad in restore mode. You have to restore to use it in Itunes." I try to restores but:
"Extracting software...preparing the restauration...waiting for the Ipad.....the Ipad could not be restore erro 9"
always like this..
Can anyone help me, please? I was watching a video and stopped working...
Manuel

Click 9 > iOS: Resolving update and restore alert messages

I am trying to activate my iphone 4 via my itunes but i keep getting the error (1) message at the end of restoring. Any suggestions?

I am trying to activate my iPhone 4 via iTunes but i keep getting the error (1) message at the end of the restore. I believe my iphone has to be in DFU mode but i already tried that and same thing. Does anyone have any suggestions?

The error is just a simple error message just like (1013) instead it says (1). The iPhone I am trying to activate has been activated before I just currently have no service and I think that activating it will solve the problem. I just can't restore through iTunes because it won't finish. I get the message every time I try to restore.

HT201263 I did not sync my iPod Touch with iTunes and I have forgotten my password. How do I unlock it?

I did not sync my iPod Touch with iTunes and I have forgotten my password and now it is locked. I have the recovery mode screen at "conect to iTunes", but iTunes is not recognizing it. How do I unlock it?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I cannot get out of a frozen state on my iPad. It is showing Itunes and usb connection images on screen

PLease help me get my IPAD out of this frozen state. It is showing the Itunes and USB connection image. It will do absolutely nothing! HELP!!!

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

I cant reinstall os x because it says my lion HD is locked (in recovery mode) How do I unlock???

Hi, I recently had trouble with my macbook pro as it use to shut down un expectedly at 40 percent battery, after a while it wouldnt boot up so i rebooted in revovery mode. I ran disk utility and tried to repair my internal HD and it said "can not repair hard drive, back up as many files as you can and erase the hd and reinstall" so i tried an alternative by trying to reinstall os x yosemite. I failed as it said your HD is locked???? Is this because its corrupted? or could i get around this? I dont have a back up either as it was stolen overseas. PLEASE HELP!!!!

I hope you have your files backed up. Here's the solution:
You need to be able to boot the computer from another device such as a bootable DVD, a bootable USB flash drive. or if you computer is a 2011 model or later then you can boot from a network drive by restarting the computer and after the chime press and hold down the COMMAND-OPTION-R keys until you see a spinning globe appear. You need to have an Internet connection. I recommend using Ethernet because it is faster and more reliable than Wi-Fi. It may take upwards of 15-20 minutes to startup in the network Recovery HD. After the Utilities Menu appears you can select Terminal from the Utilities menu in the screen's menubar.
$ diskutil list
Should show something like this:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            120.5 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *64.0 GB    disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         63.2 GB    disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
Then format the disk in question. In this case, disk1.
$ diskutil eraseDisk JHFS+ name disk1
You should see this:
Started erase on disk1
Unmounting disk
Creating the partition map
Waiting for the disks to reappear
Formatting disk1s2 as Mac OS Extended (Journaled) with name name
Initialized /dev/rdisk1s2 as a 59 GB HFS Plus volume with a 8192k journal
Mounting disk
Finished erase on disk1
Select Reinstall OS X from the Utilities Menu and click the Continue button.

When I open firefox or try to open any website I get the Error 404 message stating page not found, how do I correct this?

When opening firefox the error 404 immediatly comes up and NO websites (bookmarked or not) will come up, the error 404 message repeatedly comes up. I have deleted and re-installed different firefox versions and nothing has worked yet. What else can I try?

Do a malware check with some malware scan programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

TS3694 i am trying to restore my iphone4 but i keep getting an error 3194 message, what do i need to do?

My phone crashed during a software update and when i try to restore it on the itunes site, i keep getting an error 3194 message. It is an iphone4, what can i do?

This usually means you previously used an iPhone hacking utility such as tinyumbrella which altered your computer hosts file, blocking access to the Apple server, gs.apple.com:
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Can I use the same USB cable for both the iPhone and the iPad?

Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad? The iPad does not charge when plugged into the computer or the wall (110V) adapter. I've been able to sync in iTunes using the same cable on both.

Actually, the iPad charger works just fine with iPhones and iPods. The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

HT4623 I am trying to update my ipad from ios 4.3 but when connected to itunes I get an error messagesaying that the internet is not accessible when it is. How do I resolve this?

Hi
I am trying to update my ipad from ios 4.3 but when connected to itunes I get an error message saying that the internet is not accessible when it is. How do I resolve this?

Disable your firewall and antivirus software, restart your iPad, quit iTunes, restart your computer and then try to update again.

TS3694 My iPad is in recovery mode, however when I attempt to restore it through iTunes I get an error message: "an unknown message occured, Error 40", which apple has no current information on. Any thoughts or suggestions on how to correct this is appcia

My iPad is currently in recovery mode. When i attempt to restore it through iTunes, I get an error message: "an unknown error has occured, error 40", Help is appreciated!

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

When I sync with my iphone i get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage. How do I turn this message off?.

Question:
When I sync with my iphone I get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open. This continues until I quit Entourage. How do I turn this message off? It interferes with any other work I am doing. I appreciate any suggestions.

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

My iPad2 works great now after IOS 8.1 Update
I did my iPad2 update thru iTunes on my iMac and it was sucking the iMacs memory very low during the update. Safari froze before loading the first web page and I did a hard boot and went fishing as I saw where it was going to take a long time to recover. When I tried again it wasn't quite right and then did one more hard boot and then did a Reset by going to General-Reset-"Reset all Settings" and it works real well now without loosing any data and in-home wi-fi clocks at 17Mbps download. Probably like most of you I’m sticking with OSX 10.9.5 Mavericks as it gets the job done very nicely and don’t need all that extra fancy stuff that probably will slow things down.

HT201210 Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Does anyone recom

Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
Thank you

There is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple
About the error code.....
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
If needed.....
Additional Information
If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.

Trying to upgrade OS on an original iPad. Screen is locked showing iTunes/USB cable icons. Connected to iTunes and get an error 3014 message stating it cannot be restored and screen is locked in this mode. How do I unlock?

Similar Messages

Maybe you are looking for