Virtual PC and Atomic Park

this is my first post, and i am not sure where best to ask this.
i bought VPC 7 with windows 2000 in march, from an online retailer called atomic park. they had good ratings and the $220 price was a little lower than other places.
today i had to reinstall it, and do not have the box with my key numbers so i called tech support. at first they said i could buy the keys for $10 each (one for VPC7, one for windows) but then they informed me that the part number on my cd is NOT a retail number. and they could not help me at all.
apparently what i may have been sold is a "market" or "select" cd. (i never heard of these terms). the woman said that these CDs are usually sold to schools, are not the complete software, do not come with free support.
i am wondering:
is it possible i was not sold a retail copy?
is it legal to do so?
what should i do??
i am frustrated especially after reading the bad press about atomic park online. for example... http://www.answers.com/topic/atomicpark-com?cat=technology
i have sent an inquiry to atomicpark and informed my credit card company (who says it is probably too late to dispute the $220 charge). it seems as though they don't answer their phone often or respond to emails.
any thoughts are appreciated.
thank you ...

Here is the message I first got when I tried to start up Virtual PC.
http://homepage.mac.com/baiaz/virtualpc.jpg
In a Norwegian Forum for mac, somebody said that I should upgrade Virtual PC 7 to Version 7.0.2.
I just did and now I dont get this message but still I cant get into internett. any solutions?

Similar Messages

Difference between Parked invoice and posted park invoice.

Dear All,
I am trying to create a new program to extract the invoices posted by MIRO and MIR7. I have no problem to find invoices posted by MIRO in RBKP and RSEG.
However, as currenty one user will use MIR7 to park invoices and another user will use MIRO to post the invoices, I don't know how to sparate the parked invoice and posted park invoice. C's I have found that the parked not posted invoice and posted park invoice were all displayed in RBKP with transaction code MIR7.
Thank you very much
Emma

Hi,
*Park*
If the Invoice document is missing some information that is required for posting. In this case we will park the document. Here some preliminary checks will be performed. Balance might not be zero.But in this case updates were performed.
*Post*
The invoice was posted online and verified as being correct(Balance must be Zero). Updates were made.
Please use RBKP-RBSTAT field to find out the different type os status.
I hope this helps.
Regards
Ravinagh Boni

How to delete Ubuntu virtual desktop and free up allocated space in windows 8?

I have tried out Hyper-V for the first time to install Ubuntu desktop. During the installation process, 10GB of space is allocated. I believe this space would have been created as a separate partition and formatted
to linux file system. Please correct me if I am wrong.
Now I would like to remove the Ubuntu virtual desktop and free up the allocated space. I have deleted the desktop from the Hyper-V manager. Is this sufficient to free up the space?
Disk partition tool shows following partitions
Volume
Layout
Type
FS
Status
Capacity
Free
Volume (C;) Simple
Basic NTFS
Healthy(Boot, Page File ...) 218GB
8GB
Volume <nolabel> Simple
Basic Healthy(Recovery Partition)
450MB 450MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
350MB
350MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
10.5GB
10.5GB
Volume <nolabel>
Simple
Basic
Healthy(EFI
System Partition)
260MB
260MB
Volume <nolabel>
Simple
Basic
Healthy(Primary
Partition)
8GB
8GB
I am not sure of the unnamed, unused volume. Hence I listed all.
However Diskpart tool in command prompt does not show the last one [ 8gb]. Does this mean if this was allocated
to Virtual desktop? Please help

You must delete the VHDx that you created when you created the VM.
This is the virtual disk that Ubuntu was installed into - you will not see this as a volume, you will see this as a VHDx file.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Problem with Virtual PC and Network Connection - VPC gets disconnected

Hi,
I've been having a few problems with a virtual computer and its network connection. I've set up a few computers the same way over the years and they all work fine except this one. We use the Virtual PC and XP mode to access our data from an older
program. The databases are on a server, which are accessed as a mapped drive. Every once in a while (with no particular pattern, sometimes it doesn't happen all day, sometimes it happens every 5 mins), the VPC gets disconnected from the network,
my program returns a file read error and then everything is frozen. When I try to ipconfig/release and renew, it releases correctly then it won't renew. I need to shut down the VPC from the Win7 task manager and even so, it doesn't shut it down,
even when I try to kill the vpc process. The only way it'll come back up is if I restart the computer. The network connection on the Win7 computer doesn't do that.
Is there anything I can do to fix this ?
Thanks,
Melanie

Hi,
Does it become more stable now, actually, I'm afraid that this issue is not related with the drive letter or name. Since you're using bridge mode, the I would suggest you use NAT as a test, it is the default network configuration, which allows the VM
to leverage the external TCP/IP network connected to the host. This is very useful if you regularly move the host computer between different network configurations. NAT is the preferred networking option when there is a shortage of IP addresses, a need to
ensure the VM’s IP address is not targetable from an external network, or a need for connecting using WWAN.
Yolanda Zhu
TechNet Community Support

The essential guide to DW cs4... by D. Powers: when from wamp to xampp+virtual host and having problems :(

Following the book in chapter 2 I think Ivé followed everything correctly, but have encluded all the things I've edited below.
I was using wamp with no problems but after trying to set up a virtual host and now using xampp im abit lost its probabsomething stupid but I can find the prob.
(This post is abit long and dragged out so I used some colour to try ease the reading..)
When I try to view a dynamic page in live view or in firefox I get the following error:
**when using:
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
result:
Access forbidden!
You don't have permission to access the requested object.     It is either read-protected or not readable by the server.
If you think this is a server error, please contact the webmaster.
Error 403
thegoodlife
2009/10/13 12:47:48 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
*when using:
<VirtualHost *:80>
DocumentRoot c:/htdocs
ServerName localhost
</VirtualHost>
result:
Object not found!
The requested URL was not found on this server.          If you entered the URL manually please check your     spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
thegoodlife
2009/10/13 12:32:58 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
This is what I've done, blue indicating where I have or was meant to edit, red being the relivant context. (hope it helps )
1. Created a new folder called htdocs (C:\htdocs)
2. Changed the pathname to:
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/htdocs"
and
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/htdocs">
3. Created vhosts folder; with a sub-folder called thegoodlife (C:\vhosts)
4. entered new vhost:
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1 localhost
127.0.0.1 dwcs4
127.0.0.1 thegoodlife
127.0.0.1 bin.errorprotector.com ## added by CiD
5.It says uncomment the command by removing the #, (Supplemental configuation.), but this is the origional file; already uncommented?
# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"
# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"
# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"
6.Set the permissions and changed the code as instructed, unsing (c:/xampp/htdocs) as advised.
# You may use the command line option '-S' to verify your virtual host
# configuration.
<Directory C:/vhosts>
Order Deny,Allow
Allow from all
</Directory>
# Use name-based virtual hosting.
##NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/dwcs4
ServerName dwcs4
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/thegoodlife
ServerName thegoodlife
</VirtualHost>
Then creating the site definition:
local root forlder: C:\htdocs\thegoodlife\
testing server folder: C:\vhosts\thegoodlife\
URL prefix: http://thegoodlife/
hope i've covered all area's where I could have gone wrong

Just one more thing - the description of what i did while first Kernel appeared:
Happened 2 days ago. Wasn't turning it off for like a day, only sleep mode by closing it. Worked fine all day, wasn't doing anything, except for checking mail 2-3 times and having windows 7 virtual machine opened but doing nothing, everything was going fine. Then closed it without turning off.
Opened 3-4 hours later, everything was working fine for 30 minutes of checking mail, then Kernel appeared. After that pretty much everything i did is described in part 1-5.
Note: all the time MBP was connected to internet via wifi, so updates to both MBP and virtual machine of all programs were possible.
I only shared downloads and desktop folders, so windows couldn't have access to system folder of Mac Os.
Hope this might help...Thanks again.

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

Windows Virtual PC and XP Mode refuses to start after update 25 February 2014

I have been using Virtual PC and XP Mode now successfully for more than 1 year. I am running Windows 7 Profession on a i7-2600 with 8 GB
But after the update on 25 February 2014 to both the XP Mode and Windows 7, my Virtual PC no longer works. It loops continuously and never starts.
Is anyone else having this problem? Are there any hot fixes? We have our accounting and address management system running in XP mode, so this is quite important to find a fast solution.
Thanks very much
David

Hi,
Rename the .vsv (virtual machine saved states) file in "C:\Users\[user id]\AppData\Local\Microsoft\Windows
Virtual PC\Virtual Machines",then start the VM again.
As a test, you can also uninstall the newly installed updates, check whether this issue is related with the updates. Generally, Windows Updates will not cause any issues, but if some software installed in your system conflicts with it or the updates
not installed correctly, it will cause some unexpected issues.
Regards
Yolanda Zhu
TechNet Community Support

Installing the New Virtual Machine and XP Mode in Win7x64 on the Intel 2x E5-2620 Architecture (12 cores, 24 cpus)

I have been hibernating quietly at school with an Intel Core Duo T7300 on XP, and have been insulated from the madness of multi-core processors. I gather that there were problems with installing the XP Virtual Machine on Vista under Quad architectures,
but that these eventually got resolved in 2009.
The newer problem is concerned with installing the XP Virtual Machine on Win7x64 with greater than four cores in the cpu architecture. Others have mentioned this problem over this past Summer 2012. The problem is that at the very last step of
the complete install, Win7x64 reports a failure to install the XP Virtual Machine, and with no further comment.
Apparently KB/2519949 gave a temporary (MSFT qualifies this as "temporary") hotfix solution to this problem for AMD 8-core chips in the Bulldozer series. However MSFT cautions that this problem requires further research. This was earlier
this Summer 2012.
My problem is that I have an Intel 2xE5-2620 duo-processor cpu architecture (2x6=12 cores, 24 cpus in Windows). The cpu architecture is both Intel, and with far more than the old standard of four cores. The XP Virtual Machine in Win7x64 will
not install, as described above.
I have an armload of new 64-bit software all of which has installed pristinely in Win7x64 under this 2xE5-2620 Intel architecture. However, I have one very important piece of legacy (latest version incompatible beyond XP type of legacy) technical writing
software that is critical to my PhD thesis. In need the XP Virtual Machine for this, and I have no idea how to get it. My PhD thesis supervisor also needs this particular piece of "legacy" technical writing software for his new book on Probability
Theory.
1011::1000

I have news about this issue with XP Mode on Workstation machines. I have actually known about this for a couple of months, but it has not been until these Christmas 2012 holidays that I have had a chance to follow up with an implementation.
In review, I purchased a Workstation computer for scientific computation purposes this past August 2012. My chipset is an Intel 2x E5-2620 for a total of 12 cores, and it turns out that this was not the problem for XP Mode. My OEM shipped this
machine with Windows 7, but without XP Mode, and there is a reason why.
As an aside, it should be mentioned that the main line MSFT OS, Windows 7 or 8, is what I want for this machine, and not Server 2012. The reason is that most of the scientific computation and technical writing software that I use is written only for
Windows, and not for Server. Then also hopefully Hyper-V can do in Windows 8 most of what XP Mode is doing for me in Windows 7.
My dealer was able to tell me, when he got back from holidays in late September, that the reason that XP Mode failed to install on this Workstation, and the reason it was not included by the OEM, was that the original HDD configuration was for RAID (3 available
bays) and formatted for drives of at least 1TB in size. Although the original HDD installation was only a single HDD with only 500GB, the machine was equipped to have something much larger installed. But this format excluded the possibility of
XP Mode.
So we changed the hard drive installation to something that I preferred. We installed Windows 7 on a 480GB SSD, and I installed all my software on this drive, as well as all my important data. Most importantly, since this drive is less than 1TB,
we could use the MBR format which allows XP mode. Then we also formatted the original HDD of 500GB in MBR, and decided to run it with Intel RST. This second drive is for unimportant data, and large files. For backup we chose a 2TB USB 3.0
external. In this setting, installing Windows XP Mode was easy, as the only thing we needed to do was modify BIOS to enable virtualization which was part of the Intel 2x E5-2620 chipset already.
I am very pleased with XP Mode. The scientific writing software for my thesis that I was worried about does actually run in Windows 7 under compatibility mode, but there have been some huge advantages to installing in in XP Mode as well. I still have licensed
copies of Office 2003, Acrobat Pro 9, and MathType 5.2, and other old software as well. I now have all new software, for example Office 2010 (64-bit), Acrobat Pro 10 (32-bit for 64-bit), and MathType 6.8 (64-bit), and lots of other things. However, now that
I have my scientific wrtiting software (for which the maker has not caught up with Windows Vista/7) installed in XP Mode, I have also installed WORD 2003 with MathType 5.2 in XP Mode. My scientific writing software can translate WORD 2003/MathType 5.2 in RTF
format to LaTeX. So lets hope these guys eventually catch up with Windows 7 and 8.
I am also using XP Mode to archive a large block of my old data from the XP days. I still have licensed copies of the out of date software. And I would rather not update every single old file I have to a current format. So altogether, XP Mode is working
out quite well. It is very fast with my Intel 2x E5-2620 and maximum RAM.
1011::1000
1011::1000

What's the difference between RSS and Atom feeds?

I just figured out the RSS thing, which is great. However, when I go to sign up for a RSS feed, I am often given a choice between RSS, Atom, sometimes different versions of RSS. What's the difference between all these? (I tried searching, but was unsuccessful.) How do I make a choice?
Another question, can someone see that I have signed up for RSS feed from their site?

Hi again,
but how do people decide which one to use for subscribing?
People can choose whichever one they want - Safari supports both RSS and Atom, other applications on OS X (and Microsoft Windows, Linux, etc) may only work with RSS or Atom so by publishing in multiple formats they can be fairly sure that everyone can read the content.
And how can you see who has subscribed to an RSS feed from your site?
They will be able to see the IP address of the requester in just the same way as they can when you load a webpage - there's no difference in how the RSS/Atom data is requested sent over the internet compared to HTML webpages.

What Virtual Characterstic and How to Create it.

Hi Experts,
My Requirment is to calculacte age based on DOB at run time.
One expert in this forum gave me an idea and required code how to achieve it.
Could you please specifie me on how to
1) Create Virtual Characterstic
And he asked me to in SMOD .....how can i do it...please explain me in a bit detail
Thanks

Hi,
Virtual key figures: Will not be stored in the cube. Will be computed at run time when he query is executed. The are virtual in nature and not physical. When you view the cube's contents in listcube, you will not see it there. This is not the same as calc key figures. example: to store sales in your cube and this has o be allocated to all the group companies with a business logic, in this scenario you can code the logic in an exit and derive these virtual key figures. Another example is, when you report on no of days outstanding of your debtors. This will vary depending on when you the run the report. So, a exit can be coded to compute this run time. This is classical example of virtual key figure.
Virtual characteristics: Same as above. Here you will derive the characteristics while report is run.
Depending on the requirements, you must decide when to code for a virtual kf or cha and when to store them in the cube physically.
Virtual characteristics and Key figures are useful if you want to dynamically pouplate data from the fact table to the field.
Virtual key figures are key figures within an InfoProvider that are not filled with data. Instead the key figure value is determined at runtime of the query using custom ABAP coding
Check "how to" doc for virtual characteristic/key figure details.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20use%20variable%20time%20references%20in%20currency%20conversion
Virtual key figures and charecteristcs are populated at query execution time.
These virtual objects should be included in the modelling level itself,so that it can be used in the query while using exit in that.
check this step by step doc:
https://websmp106.sap-ag.de/~sapdownload/011000358700009299362001E/HOWTOIDENTIFYCOMPRESULTS.DOC
Regards,

Apache, name based virtual hosts and multiple servers.

Hi,
Ive been playing with Apache and name-based virtual hosts for a while now, but, ive been doing it with one single server... now i have the need to forward a name-based request to another server inside the intranet (wich doesnt have a public IP, but a private)...
Something like this:
internet -----> Webserver (name based vhosts) ----> intranet-webserver
Where "webserver" has several domains resolved via name based virtual hosting, and one of those needs to be redirected (or forwarded) to another server on the LAN.
Any ideas on how to do this? i tryed searching the web, but i dont know under which keywords, so i always end on single server virtual hosting help sites.
thanks in advance!

you need to define a virtual server for it..but inside that definition.. define a proxy.
Then the middle webserver, will actually handle the request to the intranet server, on behalf of the internet client..and then pass the traffic to the internet client.
this looks like a reasonable example..
http://www.linuxfocus.org/English/March … le147.html
namely, the section "Mapping Virtual Servers"

What dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

Difference between volatile and atomic variables (util.concurrent.atomic)

All,
Can some one explain to me the difference between using
volatile variables and atomic variables as incremental/decremental counters
that is shared by multiple threads.
when should I use volatile and when should I use atomic variables.

angeshwar wrote:
All,
Can some one explain to me the difference between using
volatile variables and atomic variables as incremental/decremental counters
that is shared by multiple threads.
when should I use volatile and when should I use atomic variables.
x++ is not atomic for a volatile variable. You can have ten threads executing that concurrently and only get a increment of one when it should have been ten. This problem won't happen with AtomicWhatever.

Posting and Deleting Parked MM Invoices

Hi all!
We want to restrict access role for posting and deleting parked MM Invoices separately through transaction code MIRO. However, we cannot see any available authorization objects to restrict the role separately 1) posting 2) deleting of parked MM Invoices.
Please help.
Thanks,
Robert

If you use MIR7 tcode I think you stand a better chance of controlling it. By comparing the 2 SAP (SAP_MM_IV_CLERK_PARK & SAP_ISA_JIT_CONTROL )roles , I found one area was different which is F_BKPF_BLA Acctg doc type. For MIR7 the ACTVT is only 01-Create but for MIRO it has to have 10-to post. Another is K_TP_VALU CO-Transfer Price Valuations where MIR7 has none but MIRO has 10-to post. Try and see what happens

Clustering Virtual Office and Netstorage Services in a DMZ

Gudday Guys,
We are relative novices with implementing Virtual Office and Netstorage
but we currently have it set up to front end our student storage system.
As the system will support 40,000 students, we are looking to move from a
single server implementation to a cluster with it running on at least two
servers to share the load. In addition, in order for students to access
their files from home, we intend deploying the cluster into the DMZ and
using SSL to connect from outside.
Before we set this up, I have a few questions. Firstly, can we set the
cluster up in its own tree so that its replication etc can be confined in
the DMZ or are we forced to set it up in our existing tree which is where
the users and storage reside? We could then pass the authentication
traffic through the conduits to our replica servers. If we can do this,
are there any special tricks/tips?
Any help or suggestions would be greatly appreciated. Thanks. Bill G.

> We don't allow http access directly from the outside - PERIOD! That's a
> Policy.
no problaem, that's fine.
> We use iChain to front end some of our existing Webapps but we decided to
> do this slightly differently this time and host the webapp itself in the
> DMZ and the services behind the firewall. That way we can easily access it
> both from within and outside the district.
well.......
> I've opened conduits for Authentication to the other tree (Port 524 tcp
> and udp) and also SLP (Port 427 TCP and UDP). I'm having trouble getting
> access to the DAs in the other tree. Any Thoughts?
you need to open up more ports. The client uses a "high" port as the source
port and 427 as the destination port when talking SLP. The DA will respond
to the client's source port. The source port from the server will be 427 but
the destination port will not be. You will need to open ports from the
client to allow high ports. 1024 to <whatever> is the normal range.
<whatever> supposedly never goes over 1500 or so.
NETSTAT -A will show you what its using.
Cheers!
Richard Beels
~ Network Consultant
~ Sysop, Novell Support Connection
~ MCNE, CNE*, CNA*, CNS*, N*LS

Virtual PC and Atomic Park

Similar Messages

Maybe you are looking for