Virtual Server Conversion problem

Hello Team,
I am facing a problem where my virtual server IP is translated wrongly on the Cisco 7604 router. The TCP connection related is dropped due to this IP. I checked the vserver configuration and found that the TCP drop could be due to Idle 10 config on the serverfarm config. I am attaching the running configuration along with the problems we are facing:
1. Node X sends “Keep Alive” message on TCP session to Node Y.
2. Router converts real IP address of Node X to virtual IP address.
However, although virtual IP address should be “172.20.40.20”, Router converts it to “10.129.120.7x”.
6. Node Y receives “Keep Alive” message on TCP session from “10.129.120.7x”. However the source IP address is abnormal as the TCP session so Node Y discards this “Keep Alive”.
7. Router detects that Node Y has never responded to Node X against “Keep Alive”. As the result, router Resets the TCP session.
8. Due to the above, all TCP sessions are disconnected.
The Running Config is attached for reference.
Regards
Hemanth

Hi Glenn,
According to your description, my understanding is that you could not access site pages after doing a virtual migration using VMware Converter.
Please run the PowerShell command below on the VMware vSphere 5.5 v10 machine:
psconfigui.exe –cmd setup –runbysetup
There are two similar posts for your reference:
https://social.technet.microsoft.com/Forums/en-US/7f903e1d-4965-4d4a-87e7-114f43bd4501/sharepoint-2010-the-trial-period-for-this-product-has-expired
http://retrohack.com/sharepoint-2010-trial-period-expired/
If this issue still exists, please check the log file to find more information about this issue. The path of the log file is: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Virtual Server Logging Problem

I'm currently using Sun Application Server 9. I've created a virtual server together with a new listener on a port 8081. I have two problems here:
1) The website on the virtual server runs fine. And I've coded System.out.println on several servlets for assisting purposes. My problem is that, i can't see those message printed on the server.log by System.out.println.
2) The same copy of WAR file has been deployed to the virtual server which it's able to perform JDBC functions in default server. Thing turns funny when the same WAR file that runs on the virtual server is unable to perform the JDBC functions.
Can't figure out why. Please help me.
Thanks!

There are two kinds of virutal servers - IP/Socket/Port based, and URLHost based.
You created a IP/Socket/Port based virtual server. Instead, you should look for the URLHost fiend in the virtual server pages and change it to reflect the correct DNS name it should respond to. Make sure this VS (and the default) are both attached to the port 80 listen socket.

Virtual server starting problem in which sap bi in installed

hi guys
any help will be appreciated
when i am starting my virtual system where bi is installed i am getting following message and system is not starting.
"the system could not be restarted from its previous location because the memory configuration has changed. if you proceed, your hibernated context may be lost. To properly resume, you should turn your machine off now, restore the original memory configuration, then reboot the system.
delete restoreation data and proceed to system boot menu."
please help to make my system working.
memory size is ok but i dont know how to delete restoration data.
thanx

> when i am starting my virtual system where bi is installed i am getting following message and system is not starting.
what "virtual system"? What product are you using?
> "the system could not be restarted from its previous location because the memory configuration has changed. if you proceed, your hibernated context may be lost. To properly resume, you should turn your machine off now, restore the original memory configuration, then reboot the system.
> delete restoreation data and proceed to system boot menu."
The message is pretty clear. You changed your memory configuration (added more memory) and you apparnetly did not shut down the instance before you hibernated it.
Press F8 and select "Boot Windows normally" during the Windows boot.
Markus

Conversion from physical to virtual server

Our server technology group wants to convert our physical
server that contains the RoboEngine to a virtual server (using ESX
VMware). We are using RoboHelp 5 to publish WebHelp to the
RoboEngine. Has anyone else converted from a physical to a virtual
server? If so, could you tell me about any problems you
encountered?
Thanks,
Liz

Hello Nelson,
There are quite lot of things in TMG which are dependent on Hardware.
If you want to migrate from physical to virtual server, you can follow the steps here which are recommended/supported way of doing it.
Though this article is for ISA to TMG migration, still you can follow the same steps for Physcial to Virtual migration.
http://technet.microsoft.com/en-us/library/dd440994.aspx
Please let us know, how it goes!

Problem with virtual Server

We are trying to fix a problem where a URL is only supposed to be visible from the company intranet, not the internet as a whole.
We have created a virtual server on the same system that is listening on a different port (1443 instead of 443) . However despite various changes to the server.xml such as changing the docroot, disabling or removing WEBAPP entries etc, the server behaves exactly the same on port 1443 as it does on port 443.
If I could make it display ANYTHING differently it would be a start. Any assistance is appreciated.

Care to share your non-working server.xml file?

PROBLEM VIRTUAL SERVER GLASSFISH

Hi I have problems setting up virtual servers, for example my page www.pagina.com
when configuring the virtual server
id = page.com
host = page.com, www.page.com
the problem is that I read the index.html page.com the docroot www.page.com but works well, I read the war and runs it, the problem is when you have no "www"
any idea?
i am from argentina , thanks.

Are you using Web Server or Application Server? If you are using Glassfish Application Server, then please write to Java.net GlassFish Forum located at [http://forums.java.net/jive/forum.jspa?forumID=56|http://forums.java.net/jive/forum.jspa?forumID=56]

Virtual Server problem

We are having a problem with the wrong pages being displayed
for a new virtual server that has just been setup on one of our
existing servers. if I request index.cfm from the new virtual
server, I get index.cfm from the existing virtual server. HTML
pages are displayed correctly, and so are pages from the second
virtual server that do not have the same name as a file on the
first.
The symptoms are exactly as described in
this technote, but the
catch is that "Cache web server paths" is already unchecked in CF
Administrator (and the setting in jrun.xml is also correct).
Does anyone know of any other causes of this problem (and
hopefully a solution)?
Thanks
Tim

For the benefit of anyone else with the same problem, we
solved this by following the steps described at
http://www.bloginblack.de/archives/000120.cfm
English
translation)

Business connector server on Virtual Server

Hi,
Currently our 4.6 release Business Connector servers running on Windows NT Operating system. We would like to upgrade them to BC release 4.7 on Windows 2000 operating system on Virtual servers.
Are there any known issues/disadvantages if we install Business connector servers on Virtual Server rather than a Physical server?
These virtual servers will be in the same domain as that of SAP systems. Host names of the upgraded Virtual servers will be same as the current production BC hosts.
Thanks,
Srini

Technical Data
These functions are:
Changed, new, deleted
For Release
   Software Component
·        Component: SAP Business Connector (external)
·        Release: 4.7
Assignment to Application Component
BC-MID-BUS (SAP Business Connector)
Country Setting
Valid for all countries
Use
The following information provides you with an overview of the new features in SAP BC Release 4.7: It also tells you about incompatible changes that you need to know about before performing an upgrade.
SAP BC 4.7 is based on Integration Server 4.6 from webMethods. However, the SAP BC elements in Integration Server 4.6 have been redeveloped (see below for details).
Features
Additional Functions in SAP BC Developer
As well as SAP BC Administrator GUI, you can now use SAP BC Developer to perform typical development tasks. You do not need administrator authorizations in SAP BC Developer to do this. For example, with SAP BC 4.7 you can use SAP Lookup to generate elements for the Developer. This enables you to gather information about function modules, structures (tables), BAPIs and IDocs in an SAP system, and then generate outbound maps or records for these objects directly.
SAP BC Developer contains a new menu, SAP, which contains the following functions:
·        Look up a function module and generate an outbound map
·        Look up a structure definition and generate a record.
·        Lookup a business object.
·        Look up an IDoc and creating a Record.
·        Browser for Function Maps.
In addition, the Developer now also supports the following actions:
·        Generate an SAP inbound map if you want an SAP system to run a service in SAP BC.
·        Generate an SAP outbound map to execute a function module in an SAP system.
·        Generate a record based on an SAP ABAP Dictionary structure.
·        Generate a record based on an SAP IDoc.
SAP BC Developer now also supports a proxy bypass list. This means that you no longer need to define whether a connection runs through a proxy; instead, the bypass list performs this task.
New Public Services on SAP BC Server
pub.string:gzip
Compresses the specified input string and generates a check total (optional). For measurements or for statistical purposes, the lengths of the zipped and unzipped strings are provided as output.
·        pub.string:ungzip
Decompresses a specified input string, which was compressed with pub.string:gzip, and verifies the check total (optional).
·        pub.string:numericParse
Analyzes a number in accordance with a given number pattern.
·        pub.math:randomLong
Generates a pseudo random number and sends its string representation in a pipeline variable. You can use this number as a universal identifier with an acceptable level of security, as long as it is used in non-distributed scenarios and for a small number of variables.
·        pub.file:head
Shows the start of a given file.
·        pub.file:tail
Shows the end of a given file.
·        pub.flow:sleep
Puts the current service into sleep mode for the specified period (in seconds).
Restructuring of the WmPartners Package
The WmPartners package in SAP BC Server has been completely restructured and now offers the following enhancements:
·        Improved status information in the messages displayed in the Transaction Store and the Audit Log. This solves a range of problems, such as incorrect status information being displayed by IDocs.
·        Improved search and sort options for transactions in the file system of the Message Store. In the Transactions menu, SAP BC Administrator GUI offers you a new option, Message Store Query Settings, which enables you to select and delete transactions. In Release 4.7, the Message Store can also be displayed on separate pages, which makes it easier to edit large numbers of transactions.
·        Improved search and sort options for Routing Rules. In the Routing Rules menu, SAP BC Administrator GUI offers you a new option, Routing Rule Filter Settings, which enables you to restrict the number of routing rules that are displayed, and to sort the display. The filter accepts all combinations of characters, and the placeholders '*' (string of characters) and '?' (one character). This makes it easier to sort and search for routing rules, especially if you need to process a large number of communication partners and message types.
·        Forwarding the "Confirm Event" tRFC (triggered by an SAP system) to the next receiver (for the following transports: B2B Service, ALE (R/3 IDoc), and XML (only if another SAP BC is the receiver)) and triggering "Confirm Event" from an external client. Both of these cases can be significant if the final receiver is an SAP system. In this case, "Confirm Event" removes the transaction ID from the ARFCRSTATE table, which can improve system performance significantly when a large number of tRFCs are being processed.
Support for Distributed Statistic Records (DSRs)
SAP BC has supported the generation of DSRs since Release 4.7 DSRs enable you to monitor the performance of each SAP system and its components. In this way, you can check how much system load is produced by each individual component, and how many resources are being used. This enables you to identify "performance leaks" and optimize system performance.
The DSR support integrated in SAP BC also allows you to measure the total retention period of a process in SAP BC. To evaluate the DSRs, you require additional SAP software, including specific versions of the SAP Solution Manager, and the RFC Library. The exact requirements are still being defined.
The details will be published in SAP Note 620418. You can find a link to this SAP Note on the SAP BC download page at http://service.sap.com/sbc-download.
SAP BC Server Core Enhancements
·        Reverse Invoke
The reverse invoke protocol has been enhanced and now allows you to forward more information, such as IP addresses.
If, for example, an application fails because a connection is broken, and other working connections exist, the connection is checked using a ping.
From now on, the internal server can open or reopen a defined number of connections, if necessary.
A document is generated for any exceptions on the internal server.
·        Email Listener
New Features in the Email Listener
¡        Reprocessing of invalid mails for IMAP Server
¡        Processed mails selected as "unread" if they have not been deleted.
You can also specify whether mails with exceptions are deleted or not.
·        Update Manager
The Update Manager manages fixes and patches for the upgrade of an SAP BC Server. Previously , the Update Manager allowed a fix to set other fixes as obsolete, using the updateVoidList field in the update.cnf file of the fix. An obsolete fix is not shown in classpath, but up to now the Update Manager has not been able to give a fix in classpath priority ahead of this other fix. The Update Manager has now been enhanced to support these fix priorities: The update.cnf file in the fix now contains an updatePrecedeList field.
Incompatible Changes
SAP BC Delivery Without JVM
The Windows Version of SAP BC 4.7 is no longer delivered with a Java Virtual Machine (JVM). The SAP BC 4.7 Installation Guide describes the JVMs that are supported.
See also
For more information, see the documentation on the SAP Business Connector, under
·        http://service.sap.com/connectors (SAP Business Connector ® SAP Business Connector in Detail ® Documentation).

"Cluster is incorrectly configured on the virtual server." re-add server

Took a server out of a pool, then later went to re-add. /OVS/ mounts fine on the server, but when I go to VM Mangler, it throws the following errors:
"OVM-1011 Oracle VM Server sonorx3 operation HA Check Prerequisite failed: failed: <Exception: ha_check_shared_storage_mount failed: <Exception: srv('sonorx3'). failed! => <Exception: Cluster is incorrectly configured on the virtual server.> ."
In /var/log/ovs-agent/ovs_operation.log on the host that fails to join, I see:
"StackTrace:
File "/opt/ovs-agent-2.2/OVSXHA.py", line 99, in check_shared_storage_mount
raise Exception("Cluster is incorrectly configured on the virtual server.")"
What step is missing here?

I've tried re-doing ovs-makerepo.
Google doesn't know anything about the problem (other than this thread here, which it has already indexed).
What gives?

Distiller 8 Server issue on a Virtual Server

We had distiller Server V8 running on a windows 2003 3 server and had no known problems. We had that server virtualized and we are beginning to see an issue and wonder if it is related. We have multiple watched folders receiving .ps files from two different sources. We are seeing files from one one "in" source being distilled into the "out" folder of the other source, renamed the name of one of the files that should be in the other source.
To explain..file named "a1.ps" from source "a", place in the "a" in folder is being renamed file "B1" and showing up in the "B" out folder.
Is there an issue with Distiller Server 8 running on a Virtualized Server?

HI,
Oracle is provided two documents for OAS install in Solaris (32bit and 64bit).
Here I am providing both documents.
http://docs.oracle.com/cd/B31017_01/solx86.1013/install.pdf --- Oracle app server install 32bit
http://docs.oracle.com/cd/B31017_01/sol.1013/install.pdf -- orcle app server install 64bit
Award points it is useful.
Thanks,
satya

Can I install Adobe Connect version 8 on a virtual server?

Hi everyone. We are looking to upgrade our version of Adobe Connect and to put it on a virtual server. Our current enviornment Adobe Connect v8 on a physical server.
Is this possible?
Is it supported?
Has anyone done this and has experienced no problems?
thank you in advance everyone.
scott

Hey Scott,
Many customers today run Adobe Connect 8 virtually on WinSrv 2008 64-bit. First make sure you read the page link below that details our tech specifications and that your server is compliant.
http://www.adobe.com/products/adobeconnect/tech-specs.html
Also, you will want to discuss where your DB will reside (on that same virtual or a separate one). The biggest improvement you will see is with performance. The speed of the server alone is enough to upgrade. Microsoft definitely made some improvements there...
I am assuming you know all the usual WinSrv settings such as Domain, etc...so will not discuss those here..
Regards,
Scott@Adobe

Virtual Server fails to compile JSP pages -repeat

I'm running iWS 6.0 SP2 using jdk 1.3
I have 4 virtual servers defined each serving out HTML pages and everything runs fine.
I'm building a 5th VS and I need it to support JSPs and nothing works...
I've turned on all the debugging and trace features I can find but, nothing helps me resolve the fact
that the JSPC can not locate the index.jsp file.
Below is a copy of the JSP1x error found in the errors file:
[12/Aug/2002:18:19:27] info (14254): Service(): uri=/index.jsp cgiScriptName=/index.jsp token=null cached=false
[12/Aug/2002:18:19:27] info (14254): Internal Info: loading servlet /index.jsp
[12/Aug/2002:18:19:27] info (14254): JSP: This is a jsp 1.x file
[12/Aug/2002:18:19:27] info (14254): JSP: Before JSP1x compiler.compile, servletName = /index.jsp servletPath = /bto/appl/netserver/PROD/BUSINESSWARE/public_html/index.jsp & dir = ../ClassCacheclasspath = ../ClassCache
[12/Aug/2002:18:19:27] info (14254): JSP11 Log:Package name is: _jsps
[12/Aug/2002:18:19:27] info (14254): JSP11 Log:Class file name is: /bto/appl/iplanet/servers/https-TE-Production/config/../ClassCache/_jsps/_index_jsp.class
[12/Aug/2002:18:19:27] info (14254): JSP11 Log:Java file name is: /bto/appl/iplanet/servers/https-TE-Production/config/../ClassCache/_jsps/_index_jsp.java
[12/Aug/2002:18:19:27] info (14254): JSP11 Log:Class name is: indexjsp
[12/Aug/2002:18:19:27] info (14254): JSP: JSP1x compiler threw exception
java.io.FileNotFoundException: /bto/appl/netserver/PROD/MBDB/public_html/index.jsp
at org.apache.jasper.compiler.JspReader.pushFile(JspReader.java:187)
at org.apache.jasper.compiler.JspReader.<init>(JspReader.java:253)
at org.apache.jasper.compiler.JspReader.createJspReader(JspReader.java:259)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:164)
at com.iplanet.server.http.servlet.NSServletEntity.load(NSServletEntity.java:252)
at com.iplanet.server.http.servlet.NSServletEntity.update(NSServletEntity.java:173)
at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:416)
[12/Aug/2002:18:19:27] warning (14254): Internal error: Failed to get GenericServlet. (uri=/index.jsp,SCRIPT_NAME=/index.jsp)
Based on the above information I notice a few things that seem to not follow the documentation.
First the JSPC is looking for a file in MBDB/html even thought the original index.jsp file is
part of the BUSINESSWARE virtual machine
Second the ClassCache files do not follow the documented naming convention
jsps/VS id/uriid ...
Thanks in advance for your assistance.

Not related to the problem but you shouldn't really be using JDK 1.3 (use JDK 1.3.1 if you need to use JDK 1.3+). As for the problem, the problem seems to be you don't seem to be ling web application. Could you add a web application with context root as "/" for the virtual server and I am positive this problem should go away.

SCSI-3 Persistent Reservation (PGR) on virtual server

I have problem with storage virtualization. It looks, that on virtual server (hosted by Hyper-V) there isn't possibility to have a SCSI Persistent Reservation (PGR). Am I right?
Thank you for any help.

I have problem with storage virtualization. It looks, that on virtual server (hosted by Hyper-V) there isn't possibility to have a SCSI Persistent Reservation (PGR). Am I right?
Thank you for any help.
Correct. Use iSCSI, Virtual FC or Shared VHDX (see below).
Guest VM Cluster with Hyper-V
http://technet.microsoft.com/en-us/library/dn440540.aspx
Storage options
The following tables lists the storage types that you can use to provide shared storage for a guest cluster.
Storage Type
Description
Shared virtual hard disk
New in Windows Server 2012 R2, you can configure multiple virtual machines to connect to and use a single virtual hard disk (.vhdx) file. Each virtual machine can access the virtual hard disk just like servers
would connect to the same LUN in a storage area network (SAN). For more information, see Deploy a Guest Cluster Using a Shared Virtual Hard Disk.
Virtual Fibre Channel
Introduced in Windows Server 2012, virtual Fibre Channel enables you to connect virtual machines to LUNs on a Fibre Channel SAN. For more information, see Hyper-V
Virtual Fibre Channel Overview.
iSCSI
The iSCSI initiator inside a virtual machine enables you to connect over the network to an iSCSI target. For more information, see iSCSI
Target Block Storage Overview and the blog post Introduction of iSCSI Target
in Windows Server 2012.
Storage requirements depend on the clustered roles that run on the cluster. Most clustered roles use clustered storage, where the storage is available on any cluster node that runs a clustered
role. Examples of clustered storage include Physical Disk resources and Cluster Shared Volumes (CSV). Some roles do not require storage that is managed by the cluster. For example, you can configure Microsoft SQL Server to use availability groups that replicate
the data between nodes. Other clustered roles may use Server Message Block (SMB) shares or Network File System (NFS) shares as data stores that any cluster node can access.
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

MII on virtual server

Hi all,
from the Best Practices Guide:
"MII can be deployed on virtual server as well as physical server configurations because of NetWeaveru2019s virtualization capabilities."
Does anyone have deployed MII + NWCE and/or UDS on a virtual server? Maybe the need of memory and network is a concern for this type of app.
Marcos

Hi, Jeremy.
I mean productive use. On [note 1409608 - Virtualization on Windows|https://service.sap.com/sap/support/notes/1409608] I found that all NW Java applications are supported in virtualized environments as in non-virtualized environments, as long the problem isn't related to performance or the hypervisor. The same note states that some applications, like TREX and MDW, aren't suitable for virtualization since they are resource-intensive, even considering resource reservation on the host. I wonder if MII is this kind of restricted app, since it can do a lot of communication and memory use.

10.6.3 virtual server anomalies

Sure could use some help here. I've installed Snow Leopard 10.6.3 Server in a virtual machine via Parallels. For a brief period I was able to ping this virtual server and even connect to it from Server Admin on my "real" Mac partition. There seemed to be no problem in connecting to the virtual server via its IP of 10.211.55.7 even though the "real" Mac side uses 10.0.1.3.
I've been trying to teach myself via a manual about Open Directory and at one point worked on getting my virtual server to have proper DNS zones. It took me awhile, but eventually I got the DNS fixed and there was a valid machine entry and reverse zone for the DNS name I had give to the virtual server.
This was where I got into trouble. Although my DNS entries in the server seem to be working just fine, I've lost the ability to connect from the "real" Mac and I cannot even ping the virtual server anymore. It would seem a no-brainer in that the virtual server is on one virtual subnet and the real Mac is on it's own real subnet; but that's how it was before I did the DNS entries and I was able to remotely connect at that time - hence my confusion. Since I'm learning I don't really yet know how to resolve this conundrum and could use some enlightening. Thanks.

Changed everything to bridged networking and all is well.

Virtual Server Conversion problem

Similar Messages

Maybe you are looking for