Virtualbox bridging problem

I post this a second time, this time more precisely
Op. System is: Archlinux 64bits
uname -a:
Linux archie 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz GenuineIntel GNU/Linux
so
I've installed virtualbox_bin 3.1.0-1 from AUR (the only way possible on a 64 bits opsys, besides the install stuff from Sun)
Followed the installation given on the Arch Wiki
I've tried all three methods ( vbox way, arch way, general ) to get bridged networking to work
( I'm a lazy guy, I prefer the Vbox way, all my modules are loaded)
All my VMs are running fine with NAT, everything works,
but bridging produces a strange error:
Clients get network adresses via DHCP,
even fixed IP settings work,
I can ping ABSOLUTELY ANYTHING
but no internet connection!
I have observed the (physical) network card with Iptraf of the HOST machine, the result is strange:
ICMP packets go through but no TCP/IP communication is possible between my hosts and the exterior world
AH, I forgot the most interesting one, I've an archlinux VM too, HE IS WORKING FINE, EVEN IN BRIDGED MODE!!!!
Is that a bridging problem?
Is that a kernel problem? ( Vbox worked well with the latest kernel - 2.6,30 -, if I remember well...)
What the hell is going on there?
( I really need bridged network, as I use Vbox essentially for network testing purposes)
Please, help!

After three weeks of research I have found lots of people having trouble with Virtualbox bridged and host-only networks
the (partial ) solution is to change the virtual network card, for me Intel Desktop M worked fine with my Debian guest
but Ubuntu doesn't want to do anything with it
for some people it works, for others it forks for a while, for others it doesn't work at all...
Buggy stuff

Similar Messages

Virtualbox bridged networking problem

Hi out there.
I'm trying to set up VirtualBox bridged networking as described in the wiki by "the arch way"
Here are the relevant details of my config files:
/etc/conf.d/bridges:
bridge_br0="eth0"
BRIDGE_INTERFACES=(br0)
/etc/vbox/interfaces:
vbox0 nofoo br0
(Where nofoo is supposed to be the user running virtualbox)
And finally...
/etc/rc.conf:
MODULES=(e1000e snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore bridge vboxdrv vboxnet)
lo="lo 127.0.0.1"
eth0="eth0 up"
br0="dhcp"
INTERFACES=(lo eth0 br0)
So. I added the user to the vboxusers group.
After a reboot, myifconfig says:
br0 Link encap:Ethernet HWaddr 00:21:70:0B:D7:11
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::221:70ff:fe0b:d711/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2001 errors:0 dropped:0 overruns:0 frame:0
TX packets:1561 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:908314 (887.0 Kb) TX bytes:290103 (283.3 Kb)
eth0 Link encap:Ethernet HWaddr 00:21:70:0B:D7:11
inet6 addr: fe80::221:70ff:fe0b:d711/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2039 errors:0 dropped:0 overruns:0 frame:0
TX packets:1569 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:941218 (919.1 Kb) TX bytes:289875 (283.0 Kb)
Memory:fdfc0000-fdfe0000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
Which should be ok.
My settings in VirtualBox itself are the following:
adapted to:host interface
interface name:vbox0
The start and stop program parameters are left empty.
Now, when i try to start my vm, the following error message occurs:
Failed to initialize Host Interface Networking.
VBox status code: -3100 (VERR_HOSTIF_INIT_FAILED).
Errorcode:
NS_ERROR_FAILURE (0x80004005)
Component:
Console
Interface:
IConsole {e3c6d4a1-a935-47ca-b16d-f9e9c496e53e}
Does anyone of you know what went wrong here?
regards
monk

steve___ wrote:i just "pacman -S virtualbox-ose" but I do not have the file "/etc/rc.d/vboxnet". I searched through the {core,extra,community}.files.tar.gz tar files as well.
Yeah, I have this same issue. I installed virtualbox-ose using pacman and also don't have /etc/rc.d/vboxnet. I've searched the entire machine and it is nowhere to be found. Did you solve it? Anyone got any ideas?

When i open pc an adobe bridge problem denotes purging

when i open computer an adobe bridge problem denotes purging

Are you trying to say that pointing to your computer in Bridge you get an error message telling you that you need to purge the central Cache?
If so, go ahead and purge it.
Your post is not clear at all. Try rephrasing it, please.
Also:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

CS6 Bridge and Mini Bridge problems

Installed CS6 and clicked on Brose in Bridge. I get the rror messare could not complete the Brose in Bridge commmand because Photoshop was unable to find the Java Script plugin. Also when clicking on Brose in Mini Bridge I get the message cannot complete the command because the extension could not be loaded I have uninstalled CS6 and reinstalled it and get the samew message Help please

Thank you very much I will try that
In a message dated 11/24/2014 12:41:45 P.M. Central Standard Time,
[email protected] writes:
CS6 Bridge and Mini Bridge problems
created by Flashy1995_ (https://forums.adobe.com/people/Flashy_1995) in
Photoshop General Discussion - View the full discussion
(https://forums.adobe.com/message/6958475#6958475)

Answers to common Bridge problems.

Here are user-submitted answers to common Bridge problems.
I invite all suggestions to addition/corrections/improvements.

Bumped. I'll convert to document once it will be possible to do so. I have great addendum by CurtY:
Windows and Mac FAQ and Translation Key
Keystrokes
ALT on a Pc = Option on a Mac (On some keyboards (UK), the Option key is labeled with Alt. )
CTRL (Control) on Pc = Cmd (Command) on a Mac, the key has the following symbol: ⌘
Right-click on a Pc = Right-click on a Mac, or Control+Click on machines without a mouse.
Menu differences
Preferences (CMD+K) are found on the Photoshop menu on a Mac, at the bottom of the Edit menu on a PC, and the shortcut is (CTRL+K).
On the same Photoshop menu on a Mac, one can find About Plug-ins... and About Photoshop, while they are located on the Help menu on a PC.
Quit Photoshop (CMD+Q) is also on that Photoshop menu on a Mac, while Exit (CTRL+Q) can be found at the end of the File menu on a PC.
Preferences location on the hard drive. There is a full document on that topic: http://kb2.adobe.com/cps/828/cpsid_82893.html
but basically: The main preference file, is on both plaform Adobe Photoshop CSx Prefs.psp it is located, alongside most other preferences on:
Mac location: Users/[user name]/Library/Preferences/Adobe Photoshop CSx Settings
Windows XP: Documents and Settings/[user name]/Application Data/Adobe/Adobe Photoshop CSx/Adobe Photoshop CSx Settings
Windows 7 and Vista: Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CSx
Settings Keywords
pc = C:/Users/user name/AppData/Roaming/Adobe/BridgeCSx/ (note: to view AppData turn on hidden file option)
Mac = (your computer name)/ Library / App Support / Adobe / Bridge CSx / Adobe
Camera Raw location NOTE: Should be only one file here.
PC = Program Files/COMMON Files/Adobe/Plug-ins/CSx/File Formats which gives you Camera Raw.8bi
Mac = /Library/Application Support/Adobe/Plug-ins/CSx/File Formats/
Photoshop Actions
Mac - Actions (not saved) Actions panel.psp Users/[user name]/Library/Preferences/Adobe Photoshop CSx Settings
Mac - Actions (saved) Actions panel.atn Program Files/Adobe Photoshop CSx(64bit)/presets/actions
PC - Actions (not saved) Actions panel.psp Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings
PC - Actions (saved) Actions panel.atn Program Files/Adobe Photoshop CSx(64bit)/presets/actions

Beans - Active-x Bridge - Problems!

Hi,
I developed an ip address bean based on JTextField (JDK 1.3.1_02), successfully packaged it as an active-x control using the packager and instructions in the active-x bridge tutorial.
The control has all sorts of problems under visual basic: to name a few:
1. The caret seems to disappear when the control receives focus
2. The tooltips dont seem to show up.
3. The focus lost event does not seem to fire in the control.
Is it worth for me to trace these issues or is the activex bridge not really practically used by anybody ?
Thanks in advance,
Vishy

Vishy,
Did you by any change find a solution to your ActiveX Bridge problem, I'm stuck with the same shit..
Thanks,
Harvey
P.S. Maybe nobody works with this technology except maybe none-visual components?

[solved]virtualbox bridge-adapter error

I wanna use virtualbox bridge-adapter, virtualbox works fine, and I already installed bridge-utils.
but I cannot found uml_utilities by pacman or yaourt
help, thanks
ps: I use static ip by route
Last edited by dxcqcv (2014-06-27 02:12:26)

I got it, I forgetten to modprobe vboxnetflt, vboxnetadp and vboxpci
no need to use uml_utilities
thx~

(SOLVED) Virtualbox bridged network, windows host, arch guest

I am trying to get my archlinux guest's network working again. It was working before I bridged the connection and changed the adaptor to the bridged one, but I want a bridged connection for certain reasons, so I want it working. This is the result I get when I use sudo dchcpcd eth0:
dhcpcd: version 5.0.7 starting
dhcpcd: eth0: rebinding lease of 10.0.2.15
dhcpcd: eth0: broadcasting for a lease
dhcpcd: eth0: offered 192.168.0.199 from 192.168.0.1
dhcpcd: eth0: acknowledged 192.168.0.199 from 192.168.0.1
dhcpcd: eth0: checking for 192.168.0.199
dhcpcd: eth0: hardware address 00:le:8c:85:a6:4d claims 192.168.0.199
dhcpcd: eth0: send_raw_packet: Bad file descriptor
dhcpcd: eth0: rebinding lease of 10.0.2.15
dhcocd: timed out
I have no clue why it's not working, but I am sort of new to linux and virtual machines. Still, can anyone help me get the bridged connection working?
EDIT: Nevermind, I fixed it.
Last edited by Shade Vortex (2009-09-08 14:48:50)

All I did was unbridge my windows network. You only select the bridged network from virtualbox, don't manually bridge your network!
If you windows network is not bridged with your vm's host only network in the windows networking page, then I dunno what your problem is.

Adobe Bridge problem

To whom this question may be directed to:
Please gidet me in resolving my problem with TRYING to open a file in Adobe bridge CC only to be presented a message telling me that it can NOT be opened because CS 5 is no longer on my computer of which I already know. Although if I go into explorer I can double click it and it opens into Photoshop CC fine.
ANYONE with an soultion to this problem and is WILLING to share the information I would be EXTREMLEY appreciateive.
Thank You in advance for taking the time to reply
Regards
Bill

Curt,
Once again thank you for being paitent with me in trying to resolve thsi problem, I am having a bit of confusion with trying tounderstand just what ext you are refeerring to.
I go to preferences and see all the exttions BUT do not understand which one I need to select and when I do select it do I then go to reset all defauls option?
I apoligize for seeming ignorant in this discussion but i am not grasping this procedure correctly I assume.
Thanks again for your assistance
Bill

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

[SOLVED]VirtualBox Bridged mode not working

For some reason I am unable to start a virtual machine in host-only or bridged mode. I can do NAT mode but that doesn't really suit what I want to do very well. Here is the message I get when trying bridged mode.
Failed to start the virtual machine Windows XP.
Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older verison of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root
(VERR_SUPDRV_COMPONENT_NOT_FOUND).
I can't run /etc/init.d/vboxdrv because it doesn't exist. I installed Vbox via Pacman and I'm embarassed to admit I don't really know where it is. I just launch it by right clicking on my desktop (using fluxbox).
Any ideas on where to go next?
also here are my vbox logs
00:00:00.534 VirtualBox 3.0.10_OSE r54097 linux.x86 (Nov 1 2009 19:44:00) release log
00:00:00.534 Log opened 2009-12-01T18:11:07.107676000Z
00:00:00.535 OS Product: Linux
00:00:00.535 OS Release: 2.6.30-ARCH
00:00:00.535 OS Version: #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009
00:00:00.535 Host RAM: 1956MB RAM, available: 1801MB
00:00:00.535 Executable: /usr/lib/virtualbox/VirtualBox
00:00:00.535 Process ID: 1818
00:00:00.535 Package type: LINUX_32BITS_GENERIC (OSE)
00:00:00.579 SUP: Loaded VMMR0.r0 (/usr/lib/virtualbox/VMMR0.r0) at 0xf9119060 - ModuleInit at 00000000f912c340 and ModuleTerm at 00000000f912c300
00:00:00.579 SUP: VMMR0EntryEx located at 00000000f912c1e0, VMMR0EntryFast at 00000000f912b530 and VMMR0EntryInt at 00000000f912b350
00:00:00.638 VBoxSharedClipboard mode: Bidirectional
00:00:00.739 ************************* CFGM dump *************************
00:00:00.746 pRoot=08bd5490:{/}
00:00:00.746 [/] (level 0)
00:00:00.746 Name <string> = "Windows XP" (cch=11)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 TimerMillies <integer> = 0x000000000000000a (10)
00:00:00.746 RawR3Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 RawR0Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 PATMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 CSAMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 HwVirtExtForced <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableNestedPaging <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableVPID <integer> = 0x0000000000000000 (0)
00:00:00.746 EnablePAE <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/HWVirtExt/] (level 1)
00:00:00.746 Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 64bitEnabled <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/PDM/] (level 1)
00:00:00.746
00:00:00.746 [/PDM/Drivers/] (level 2)
00:00:00.746
00:00:00.746 [/PDM/Drivers/VBoxC/] (level 3)
00:00:00.746 Path <string> = "/usr/lib/virtualbox/components/VBoxC" (cch=37)
00:00:00.746
00:00:00.746 [/Devices/] (level 1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pcbios/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/Config/] (level 4)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 HardDiskDevice <string> = "piix3ide" (cch=9)
00:00:00.746 FloppyDevice <string> = "i82078" (cch=7)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746 PXEDebug <integer> = 0x0000000000000000 (0)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 BootDevice0 <string> = "FLOPPY" (cch=7)
00:00:00.746 BootDevice1 <string> = "DVD" (cch=4)
00:00:00.746 BootDevice2 <string> = "IDE" (cch=4)
00:00:00.746 BootDevice3 <string> = "NONE" (cch=5)
00:00:00.746
00:00:00.746 [/Devices/8237A/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/8237A/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pci/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/0/Config/] (level 4)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/Devices/pckbd/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/] (level 4)
00:00:00.746 Driver <string> = "KeyboardQueue" (cch=14)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
00:00:00.746 QueueSize <integer> = 0x0000000000000040 (64)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.746 Driver <string> = "MainKeyboard" (cch=13)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb510 (146519312)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/] (level 4)
00:00:00.747 Driver <string> = "MouseQueue" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
00:00:00.747 QueueSize <integer> = 0x0000000000000080 (128)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
00:00:00.747 Driver <string> = "MainMouse" (cch=10)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb5e8 (146519528)
00:00:00.747
00:00:00.747 [/Devices/i82078/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/Config/] (level 4)
00:00:00.747 IRQ <integer> = 0x0000000000000006 (6)
00:00:00.747 DMA <integer> = 0x0000000000000002 (2)
00:00:00.747 MemMapped <integer> = 0x0000000000000000 (0)
00:00:00.747 IOBase <integer> = 0x00000000000003f0 (1008)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/] (level 4)
00:00:00.747 Driver <string> = "MainStatus" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/Config/] (level 5)
00:00:00.747 papLeds <integer> = 0x0000000008bbafc4 (146517956)
00:00:00.747 First <integer> = 0x0000000000000000 (0)
00:00:00.747 Last <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "Block" (cch=6)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/Config/] (level 5)
00:00:00.747 Type <string> = "Floppy 1.44" (cch=12)
00:00:00.747 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/acpi/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747 PCIDeviceNo <integer> = 0x0000000000000007 (7)
00:00:00.747 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/Config/] (level 4)
00:00:00.747 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.747 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 FdcEnabled <integer> = 0x0000000000000001 (1)
00:00:00.747 ShowRtc <integer> = 0x0000000000000000 (0)
00:00:00.747 ShowCpu <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "ACPIHost" (cch=9)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/Config/] (level 5)
00:00:00.747
00:00:00.747 [/Devices/i8254/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/i8259/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/apic/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/apic/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/apic/0/Config/] (level 4)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/mc146818/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/vga/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/vga/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000002 (2)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/Config/] (level 4)
00:00:00.748 VRamSize <integer> = 0x0000000003c00000 (62914560)
00:00:00.748 FadeIn <integer> = 0x0000000000000001 (1)
00:00:00.748 FadeOut <integer> = 0x0000000000000001 (1)
00:00:00.748 LogoTime <integer> = 0x0000000000000000 (0)
00:00:00.748 LogoFile <string> = "" (cch=1)
00:00:00.748 ShowBootMenu <integer> = 0x0000000000000002 (2)
00:00:00.748 CustomVideoModes <integer> = 0x0000000000000000 (0)
00:00:00.748 HeightReduction <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "MainDisplay" (cch=12)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/Config/] (level 5)
00:00:00.748 Object <integer> = 0x0000000008bbb6c8 (146519752)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/Config/] (level 4)
00:00:00.748 Type <string> = "PIIX4" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbafcc (146517964)
00:00:00.748 First <integer> = 0x0000000000000000 (0)
00:00:00.748 Last <integer> = 0x0000000000000003 (3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/Config/] (level 5)
00:00:00.748 Type <string> = "DVD" (cch=4)
00:00:00.748 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/Config/] (level 5)
00:00:00.748 Type <string> = "HardDisk" (cch=9)
00:00:00.748 Mountable <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.748 Driver <string> = "VD" (cch=3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.748 Path <string> = "/home/royce/.VirtualBox/HardDisks/Windows XP.vdi" (cch=49)
00:00:00.748 Format <string> = "VDI" (cch=4)
00:00:00.748
00:00:00.748 [/Devices/pcnet/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/Config/] (level 4)
00:00:00.748 Am79C973 <integer> = 0x0000000000000001 (1)
00:00:00.748 MAC <bytes> = "08 00 27 bb 10 02" (cb=6)
00:00:00.748 CableConnected <integer> = 0x0000000000000000 (0)
00:00:00.748 LineSpeed <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbb094 (146518164)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "IntNet" (cch=7)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/Config/] (level 5)
00:00:00.749 Trunk <string> = "wlan0" (cch=6)
00:00:00.749 TrunkType <integer> = 0x0000000000000003 (3)
00:00:00.749 Network <string> = "HostInterfaceNetworking-wlan0" (cch=30)
00:00:00.749 SharedMacOnWire <integer> = 0x0000000000000001 (1)
00:00:00.749
00:00:00.749 [/Devices/e1000/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/serial/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/parallel/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000004 (4)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainVMMDev" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbbac0 (146520768)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/] (level 4)
00:00:00.749 Driver <string> = "MainStatus" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/Config/] (level 5)
00:00:00.749 papLeds <integer> = 0x0000000008bbb0b4 (146518196)
00:00:00.749 First <integer> = 0x0000000000000000 (0)
00:00:00.749 Last <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/] (level 3)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainAudioSniffer" (cch=17)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbb500 (146519296)
00:00:00.749
00:00:00.749 [/Devices/ichac97/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000005 (5)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "AUDIO" (cch=6)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/Config/] (level 5)
00:00:00.749 AudioDriver <string> = "alsa" (cch=5)
00:00:00.749 StreamName <string> = "Windows XP" (cch=11)
00:00:00.749
00:00:00.749 [/TM/] (level 1)
00:00:00.749 UTCOffset <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 ********************* End of CFGM dump **********************
00:00:00.749 MM: cbHyperHeap=0x140000 (1310720)
00:00:00.750 Logical host processors: 2, processor active mask: 0000000000000003
00:00:00.750 ************************* CPUID dump ************************
00:00:00.750 RAW Standard CPUIDs
00:00:00.750 Function eax ebx ecx edx
00:00:00.750 Gst: 00000000 00000005 756e6547 6c65746e 49656e69
00:00:00.750 Hst: 0000000a 756e6547 6c65746e 49656e69
00:00:00.750 Gst: 00000001 000006fd 00000800 00000009 078bf1bf
00:00:00.750 Hst: 000006fd 01020800 0000e39d bfebfbff
00:00:00.750 Gst: 00000002 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Hst: 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Gst: 00000003 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 00000000 00000000 00000000 00000000
00:00:00.750 Gst: 00000004 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 04000121 01c0003f 0000003f 00000001
00:00:00.750 Gst: 00000005 00000040 00000040 00000000 00000000
00:00:00.750 Hst: 00000040 00000040 00000003 00001110
00:00:00.750 Name: GenuineIntel
00:00:00.750 Supports: 0-5
00:00:00.750 Family: 6 Extended: 0 Effective: 6
00:00:00.750 Model: 15 Extended: 0 Effective: 15
00:00:00.750 Stepping: 13
00:00:00.750 APIC ID: 0x00
00:00:00.750 Logical CPUs: 0
00:00:00.750 CLFLUSH Size: 8
00:00:00.750 Brand ID: 0x00
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 1 (1)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:00.751 DE - Debugging extensions = 1 (1)
00:00:00.751 PSE - Page Size Extension = 1 (1)
00:00:00.751 TSC - Time Stamp Counter = 1 (1)
00:00:00.751 MSR - Model Specific Registers = 1 (1)
00:00:00.751 PAE - Physical Address Extension = 0 (1)
00:00:00.751 MCE - Machine Check Exception = 1 (1)
00:00:00.751 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:00.751 APIC - APIC On-Chip = 0 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 SEP - SYSENTER and SYSEXIT = 0 (1)
00:00:00.751 MTRR - Memory Type Range Registers = 1 (1)
00:00:00.751 PGE - PTE Global Bit = 1 (1)
00:00:00.751 MCA - Machine Check Architecture = 1 (1)
00:00:00.751 CMOV - Conditional Move Instructions = 1 (1)
00:00:00.751 PAT - Page Attribute Table = 1 (1)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:00.751 PSN - Processor Serial Number = 0 (0)
00:00:00.751 CLFSH - CLFLUSH Instruction. = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS - Debug Store = 0 (1)
00:00:00.751 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (1)
00:00:00.751 MMX - Intel MMX Technology = 1 (1)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:00.751 SSE - SSE Support = 1 (1)
00:00:00.751 SSE2 - SSE2 Support = 1 (1)
00:00:00.751 SS - Self Snoop = 0 (1)
00:00:00.751 HTT - Hyper-Threading Technolog = 0 (1)
00:00:00.751 TM - Thermal Monitor = 0 (1)
00:00:00.751 30 - Reserved = 0 (0)
00:00:00.751 PBE - Pending Break Enable = 0 (1)
00:00:00.751 Supports SSE3 or not = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS Area 64-bit layout = 0 (1)
00:00:00.751 Supports MONITOR/MWAIT = 1 (1)
00:00:00.751 CPL-DS - CPL Qualified Debug Store = 0 (1)
00:00:00.751 VMX - Virtual Machine Technology = 0 (0)
00:00:00.751 SMX - Safer Mode Extensions = 0 (0)
00:00:00.751 Enhanced SpeedStep Technology = 0 (1)
00:00:00.751 Terminal Monitor 2 = 0 (1)
00:00:00.751 Supports Supplemental SSE3 or not = 0 (1)
00:00:00.751 L1 Context ID = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 CMPXCHG16B = 0 (1)
00:00:00.751 xTPR Update Control = 0 (1)
00:00:00.751 Perf/Debug Capability MSR = 0 (1)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Direct Cache Access = 0 (0)
00:00:00.751 Supports SSE4_1 or not = 0 (0)
00:00:00.751 Supports SSE4_2 or not = 0 (0)
00:00:00.751 Supports the x2APIC extensions = 0 (0)
00:00:00.751 Supports MOVBE = 0 (0)
00:00:00.751 Supports POPCNT = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Supports XSAVE = 0 (0)
00:00:00.751 Supports OSXSAVE = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751
00:00:00.751 RAW Extended CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: 80000000 80000008 00000000 00000000 00000000
00:00:00.751 Hst: 80000008 00000000 00000000 00000000
00:00:00.751 Gst: 80000001 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000001 20100000
00:00:00.751 Gst: 80000002 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Hst: 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Gst: 80000003 20295228 6c617544 50432020 54202055
00:00:00.751 Hst: 20295228 6c617544 50432020 54202055
00:00:00.751 Gst: 80000004 30303433 20402020 36312e32 007a4847
00:00:00.751 Hst: 30303433 20402020 36312e32 007a4847
00:00:00.751 Gst: 80000005 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000006 00000000 00000000 04004040 00000000
00:00:00.751 Hst: 00000000 00000000 04004040 00000000
00:00:00.751 Gst: 80000007 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000008 00003024 00000000 00000000 00000000
00:00:00.751 Hst: 00003024 00000000 00000000 00000000
00:00:00.751 Gst: 80000009 07280202 00000000 00000000 00000503*
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Ext Name:
00:00:00.751 Ext Supports: 0x80000000-0x80000008
00:00:00.751 Family: 0 Extended: 0 Effective: 0
00:00:00.751 Model: 0 Extended: 0 Effective: 0
00:00:00.751 Stepping: 0
00:00:00.751 Brand ID: 0x000
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 0 (0)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 0 (0)
00:00:00.751 DE - Debugging extensions = 0 (0)
00:00:00.751 PSE - Page Size Extension = 0 (0)
00:00:00.751 TSC - Time Stamp Counter = 0 (0)
00:00:00.751 MSR - K86 Model Specific Registers = 0 (0)
00:00:00.751 PAE - Physical Address Extension = 0 (0)
00:00:00.751 MCE - Machine Check Exception = 0 (0)
00:00:00.751 CX8 - CMPXCHG8B instruction = 0 (0)
00:00:00.751 APIC - APIC On-Chip = 0 (0)
00:00:00.751 10 - Reserved = 0 (0)
00:00:00.751 SEP - SYSCALL and SYSRET = 0 (0)
00:00:00.751 MTRR - Memory Type Range Registers = 0 (0)
00:00:00.751 PGE - PTE Global Bit = 0 (0)
00:00:00.751 MCA - Machine Check Architecture = 0 (0)
00:00:00.751 CMOV - Conditional Move Instructions = 0 (0)
00:00:00.751 PAT - Page Attribute Table = 0 (0)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 0 (0)
00:00:00.751 18 - Reserved = 0 (0)
00:00:00.751 19 - Reserved = 0 (0)
00:00:00.751 NX - No-Execute Page Protection = 0 (1)
00:00:00.751 DS - Debug Store = 0 (0)
00:00:00.751 AXMMX - AMD Extensions to MMX Instr. = 0 (0)
00:00:00.751 MMX - Intel MMX Technology = 0 (0)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 0 (0)
00:00:00.751 25 - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
00:00:00.751 26 - 1 GB large page support = 0 (0)
00:00:00.751 27 - RDTSCP instruction = 0 (0)
00:00:00.751 28 - Reserved = 0 (0)
00:00:00.751 29 - AMD Long Mode = 0 (1)
00:00:00.751 30 - AMD Extensions to 3DNow = 0 (0)
00:00:00.751 31 - AMD 3DNow = 0 (0)
00:00:00.751 LahfSahf - LAHF/SAHF in 64-bit mode = 0 (1)
00:00:00.751 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
00:00:00.751 SVM - AMD VM Extensions = 0 (0)
00:00:00.751 APIC registers starting at 0x400 = 0 (0)
00:00:00.751 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
00:00:00.751 Advanced bit manipulation = 0 (0)
00:00:00.751 SSE4A instruction support = 0 (0)
00:00:00.751 Misaligned SSE mode = 0 (0)
00:00:00.751 PREFETCH and PREFETCHW instruction = 0 (0)
00:00:00.751 OS visible workaround = 0 (0)
00:00:00.751 Instruction based sampling = 0 (0)
00:00:00.751 SSE5 support = 0 (0)
00:00:00.751 SKINIT, STGI, and DEV support = 0 (0)
00:00:00.751 Watchdog timer support. = 0 (0)
00:00:00.751 31:14 - Reserved = 0x0 (0x0)
00:00:00.751 Full Name: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz
00:00:00.751 TLB 2/4M Instr/Uni: res0 0 entries
00:00:00.751 TLB 2/4M Data: res0 0 entries
00:00:00.751 TLB 4K Instr/Uni: res0 0 entries
00:00:00.751 TLB 4K Data: res0 0 entries
00:00:00.751 L1 Instr Cache Line Size: 0 bytes
00:00:00.751 L1 Instr Cache Lines Per Tag: 0
00:00:00.751 L1 Instr Cache Associativity: res0
00:00:00.751 L1 Instr Cache Size: 0 KB
00:00:00.751 L1 Data Cache Line Size: 0 bytes
00:00:00.751 L1 Data Cache Lines Per Tag: 0
00:00:00.751 L1 Data Cache Associativity: res0
00:00:00.751 L1 Data Cache Size: 0 KB
00:00:00.751 L2 TLB 2/4M Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 2/4M Data: off 0 entries
00:00:00.751 L2 TLB 4K Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 4K Data: off 0 entries
00:00:00.751 L2 Cache Line Size: 0 bytes
00:00:00.751 L2 Cache Lines Per Tag: 0
00:00:00.751 L2 Cache Associativity: off
00:00:00.751 L2 Cache Size: 0 KB
00:00:00.751 APM Features:
00:00:00.751 Physical Address Width: 36 bits
00:00:00.751 Virtual Address Width: 48 bits
00:00:00.751 Physical Core Count: 0
00:00:00.751
00:00:00.751 RAW Centaur CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: c0000000 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000001 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000002 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000003 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Centaur Supports: 0xc0000000-0x07280202
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 AIS - Alternate Instruction Set = 0 (1)
00:00:00.751 AIS-E - AIS enabled = 0 (1)
00:00:00.751 RNG - Random Number Generator = 0 (0)
00:00:00.751 RNG-E - RNG enabled = 0 (0)
00:00:00.751 LH - LongHaul MSR 0000_110Ah = 0 (0)
00:00:00.751 FEMMS - FEMMS = 0 (0)
00:00:00.751 ACE - Advanced Cryptography Engine = 0 (0)
00:00:00.751 ACE-E - ACE enabled = 0 (0)
00:00:00.751 ACE2 - Advanced Cryptography Engine 2 = 0 (1)
00:00:00.751 ACE2-E - ACE enabled = 0 (0)
00:00:00.751 PHE - Hash Engine = 0 (1)
00:00:00.751 PHE-E - PHE enabled = 0 (0)
00:00:00.751 PMM - Montgomery Multiplier = 0 (0)
00:00:00.751 PMM-E - PMM enabled = 0 (0)
00:00:00.751
00:00:00.751
00:00:00.751 ******************** End of CPUID dump **********************
00:00:00.775 REM: VBoxREM32
00:00:00.779 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=75
00:00:00.812 TM: cTSCTicksPerSecond=0x7474ed92 (1 953 820 050) fTSCVirtualized=true fTSCUseRealTSC=false
00:00:00.812 TM: fMaybeUseOffsettedHostTSC=true TSCTiedToExecution=false TSCNotTiedToHalt=false
00:00:00.812 CoreCode: R3=b3f47000 R0=f805a000 RC=a02b0000 Phys=0000000035e14000 cb=0x2000
00:00:00.891 [SMP] BIOS with 1 CPUs
00:00:00.928 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xf8151060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xf809c060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 Activating Local APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Enabled APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:00:00.939 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.953 Shared Folders service loaded.
00:00:01.003 VDInit finished
00:00:01.003 PIIX3 ATA: LUN#0: disk, PCHS=4161/16/63, total number of sectors 4194304
00:00:01.003 PIIX3 ATA: LUN#1: no unit
00:00:01.003 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 0, passthrough disabled
00:00:01.003 PIIX3 ATA: LUN#3: no unit
00:00:01.003 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:01.103 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:01.204 IntNet#0: szNetwork={HostInterfaceNetworking-wlan0} enmTrunkType=3 szTrunk={wlan0} fFlags=0x1 cbRecv=223232 cbSend=36864
00:00:01.204 PDM: Failed to construct 'pcnet'/0! VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) - The component factory was not found.
00:00:01.214 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
00:00:01.214 One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND)} aWarning=false, preserve=false
00:00:01.220 Power up failed (vrc=VERR_SUPDRV_COMPONENT_NOT_FOUND, rc=NS_ERROR_FAILURE (0X80004005))
Last edited by K-radical (2009-12-07 17:42:13)

wonder wrote:be sure that the modules are loaded. lsmod | grep vbox.
for bridged you have to load vboxnetflt
Thanks a bunch...
sudo modprobe vboxnetflt
did it.

BPM - Receive Sync/ASync Bridge Problem

Hi,
I am creating a scenario for an inbound Synch request to be serviced by a BPM process.
Here is the problem that I am facing while trying to configure the Receive Step
- I created a Message Interface defined as Abstract Synchronous.
- I created a process model and put in a Receive Step: Mode - Opens S/A Bridge, Synchronous Interface - defined as above.
- I define a container with Abstract type. But when I try to locate the above defined Abstract Synch message interface, I cannot find it.
- As a workaround, I create another Abstract Message Interface defined as Abstract ASynch.
- I create a container with this Abstract ASynch message type.
- I use this container in the Receive Step.
But activating the Business Process gives the error:
Message to be received and Synchronous Interface do not have identical types.
Can someone give me the correct procedure to configure the Sync / ASync Bridge ? thanks,
-Manish

Dan,
This is the link you are looking for?
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm

CS5 Design Premium Installation Adobe Bridge problem

When I try and install CS5 Design Premium it fails because it wants me to close Adobe Bridge (which is not open) and won't let me go any further. I tried uninstalling CS3 but it won't let me because it wants me to close Adobe Bridge.
What Now?

There shoult be a Bridge icon in the system tray (bottom right corner), close Bridge from here and run the uninstaller or if you don't find this icon you can kill process Bridge.exe but this is not always the best way to overcome a problem. I would recommend closing the application from system tray icon.
Thanks,
Tahseen

Photoshop Bridge problem

Bridge opens to Paint or Windows explorer on the first try when opening a photo. Subsequently pictures open to CS4 as they should.Bridge opened to Windows Explorer after Paint disabled. CS3 similarly affected after CS4 installed and CS2 removed.Problem persists.

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Bridge Problem opening files in Photoshop CS6

CS6 Bridge appears to work fine, however when I try to open a file into Photoshop CS6 I get a flag saying it cannot find Photoshop CS4? Any ideas?
TIA Keith

PhotoGene47 wrote:
You can open Bridge and change the file associations in Edit>File Type Associations to change to PS CS6. That is the easiest way. Another way would be to open Control Panel>Programs>Default Programs to change the file association for .jpeg, .psd., .tif, et cetera.
For your info, and others, this does not work in situations were the file associations become corrupted by uninstalling a previous version. The mechanism for corruption is not quite clear to Adobe, but somehow the registry for file associations gets reset to the version that was deleted. Since the normal methods of changing file associations, that you mention, do not affect the registry file in question, the problem still remains. Therefore one needs to wipe files with the Adobe Script Cleaner or go in and change the registry.

Virtualbox bridging problem

Similar Messages

Maybe you are looking for