[SOLVED]VirtualBox Bridged mode not working
For some reason I am unable to start a virtual machine in host-only or bridged mode. I can do NAT mode but that doesn't really suit what I want to do very well. Here is the message I get when trying bridged mode.
Failed to start the virtual machine Windows XP.
Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older verison of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root
(VERR_SUPDRV_COMPONENT_NOT_FOUND).
I can't run /etc/init.d/vboxdrv because it doesn't exist. I installed Vbox via Pacman and I'm embarassed to admit I don't really know where it is. I just launch it by right clicking on my desktop (using fluxbox).
Any ideas on where to go next?
also here are my vbox logs
00:00:00.534 VirtualBox 3.0.10_OSE r54097 linux.x86 (Nov 1 2009 19:44:00) release log
00:00:00.534 Log opened 2009-12-01T18:11:07.107676000Z
00:00:00.535 OS Product: Linux
00:00:00.535 OS Release: 2.6.30-ARCH
00:00:00.535 OS Version: #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009
00:00:00.535 Host RAM: 1956MB RAM, available: 1801MB
00:00:00.535 Executable: /usr/lib/virtualbox/VirtualBox
00:00:00.535 Process ID: 1818
00:00:00.535 Package type: LINUX_32BITS_GENERIC (OSE)
00:00:00.579 SUP: Loaded VMMR0.r0 (/usr/lib/virtualbox/VMMR0.r0) at 0xf9119060 - ModuleInit at 00000000f912c340 and ModuleTerm at 00000000f912c300
00:00:00.579 SUP: VMMR0EntryEx located at 00000000f912c1e0, VMMR0EntryFast at 00000000f912b530 and VMMR0EntryInt at 00000000f912b350
00:00:00.638 VBoxSharedClipboard mode: Bidirectional
00:00:00.739 ************************* CFGM dump *************************
00:00:00.746 pRoot=08bd5490:{/}
00:00:00.746 [/] (level 0)
00:00:00.746 Name <string> = "Windows XP" (cch=11)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 TimerMillies <integer> = 0x000000000000000a (10)
00:00:00.746 RawR3Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 RawR0Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 PATMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 CSAMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.746 HwVirtExtForced <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableNestedPaging <integer> = 0x0000000000000000 (0)
00:00:00.746 EnableVPID <integer> = 0x0000000000000000 (0)
00:00:00.746 EnablePAE <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/HWVirtExt/] (level 1)
00:00:00.746 Enabled <integer> = 0x0000000000000001 (1)
00:00:00.746 64bitEnabled <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/PDM/] (level 1)
00:00:00.746
00:00:00.746 [/PDM/Drivers/] (level 2)
00:00:00.746
00:00:00.746 [/PDM/Drivers/VBoxC/] (level 3)
00:00:00.746 Path <string> = "/usr/lib/virtualbox/components/VBoxC" (cch=37)
00:00:00.746
00:00:00.746 [/Devices/] (level 1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcarch/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pcbios/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pcbios/0/Config/] (level 4)
00:00:00.746 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.746 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.746 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.746 HardDiskDevice <string> = "piix3ide" (cch=9)
00:00:00.746 FloppyDevice <string> = "i82078" (cch=7)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746 PXEDebug <integer> = 0x0000000000000000 (0)
00:00:00.746 UUID <bytes> = "52 b4 ff 3b 2d f7 57 4c 92 29 56 34 21 fc da 00" (cb=16)
00:00:00.746 BootDevice0 <string> = "FLOPPY" (cch=7)
00:00:00.746 BootDevice1 <string> = "DVD" (cch=4)
00:00:00.746 BootDevice2 <string> = "IDE" (cch=4)
00:00:00.746 BootDevice3 <string> = "NONE" (cch=5)
00:00:00.746
00:00:00.746 [/Devices/8237A/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/8237A/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pci/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pci/0/Config/] (level 4)
00:00:00.746 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.746
00:00:00.746 [/Devices/pckbd/] (level 2)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/] (level 3)
00:00:00.746 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/Config/] (level 4)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/] (level 4)
00:00:00.746 Driver <string> = "KeyboardQueue" (cch=14)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
00:00:00.746 QueueSize <integer> = 0x0000000000000040 (64)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.746 Driver <string> = "MainKeyboard" (cch=13)
00:00:00.746
00:00:00.746 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb510 (146519312)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/] (level 4)
00:00:00.747 Driver <string> = "MouseQueue" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
00:00:00.747 QueueSize <integer> = 0x0000000000000080 (128)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
00:00:00.747 Driver <string> = "MainMouse" (cch=10)
00:00:00.747
00:00:00.747 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
00:00:00.747 Object <integer> = 0x0000000008bbb5e8 (146519528)
00:00:00.747
00:00:00.747 [/Devices/i82078/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/Config/] (level 4)
00:00:00.747 IRQ <integer> = 0x0000000000000006 (6)
00:00:00.747 DMA <integer> = 0x0000000000000002 (2)
00:00:00.747 MemMapped <integer> = 0x0000000000000000 (0)
00:00:00.747 IOBase <integer> = 0x00000000000003f0 (1008)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/] (level 4)
00:00:00.747 Driver <string> = "MainStatus" (cch=11)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#999/Config/] (level 5)
00:00:00.747 papLeds <integer> = 0x0000000008bbafc4 (146517956)
00:00:00.747 First <integer> = 0x0000000000000000 (0)
00:00:00.747 Last <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "Block" (cch=6)
00:00:00.747
00:00:00.747 [/Devices/i82078/0/LUN#0/Config/] (level 5)
00:00:00.747 Type <string> = "Floppy 1.44" (cch=12)
00:00:00.747 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/acpi/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747 PCIDeviceNo <integer> = 0x0000000000000007 (7)
00:00:00.747 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/Config/] (level 4)
00:00:00.747 RamSize <integer> = 0x0000000010000000 (268435456)
00:00:00.747 RamHoleSize <integer> = 0x0000000020000000 (536870912)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 FdcEnabled <integer> = 0x0000000000000001 (1)
00:00:00.747 ShowRtc <integer> = 0x0000000000000000 (0)
00:00:00.747 ShowCpu <integer> = 0x0000000000000000 (0)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/] (level 4)
00:00:00.747 Driver <string> = "ACPIHost" (cch=9)
00:00:00.747
00:00:00.747 [/Devices/acpi/0/LUN#0/Config/] (level 5)
00:00:00.747
00:00:00.747 [/Devices/i8254/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/i8254/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/i8259/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/i8259/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/apic/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/apic/0/] (level 3)
00:00:00.747 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/apic/0/Config/] (level 4)
00:00:00.747 IOAPIC <integer> = 0x0000000000000000 (0)
00:00:00.747 NumCPUs <integer> = 0x0000000000000001 (1)
00:00:00.747
00:00:00.747 [/Devices/mc146818/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/] (level 3)
00:00:00.747
00:00:00.747 [/Devices/mc146818/0/Config/] (level 4)
00:00:00.747
00:00:00.747 [/Devices/vga/] (level 2)
00:00:00.747
00:00:00.747 [/Devices/vga/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000002 (2)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/Config/] (level 4)
00:00:00.748 VRamSize <integer> = 0x0000000003c00000 (62914560)
00:00:00.748 FadeIn <integer> = 0x0000000000000001 (1)
00:00:00.748 FadeOut <integer> = 0x0000000000000001 (1)
00:00:00.748 LogoTime <integer> = 0x0000000000000000 (0)
00:00:00.748 LogoFile <string> = "" (cch=1)
00:00:00.748 ShowBootMenu <integer> = 0x0000000000000002 (2)
00:00:00.748 CustomVideoModes <integer> = 0x0000000000000000 (0)
00:00:00.748 HeightReduction <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "MainDisplay" (cch=12)
00:00:00.748
00:00:00.748 [/Devices/vga/0/LUN#0/Config/] (level 5)
00:00:00.748 Object <integer> = 0x0000000008bbb6c8 (146519752)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/Config/] (level 4)
00:00:00.748 Type <string> = "PIIX4" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbafcc (146517964)
00:00:00.748 First <integer> = 0x0000000000000000 (0)
00:00:00.748 Last <integer> = 0x0000000000000003 (3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#2/Config/] (level 5)
00:00:00.748 Type <string> = "DVD" (cch=4)
00:00:00.748 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/] (level 4)
00:00:00.748 Driver <string> = "Block" (cch=6)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/Config/] (level 5)
00:00:00.748 Type <string> = "HardDisk" (cch=9)
00:00:00.748 Mountable <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.748 Driver <string> = "VD" (cch=3)
00:00:00.748
00:00:00.748 [/Devices/piix3ide/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.748 Path <string> = "/home/royce/.VirtualBox/HardDisks/Windows XP.vdi" (cch=49)
00:00:00.748 Format <string> = "VDI" (cch=4)
00:00:00.748
00:00:00.748 [/Devices/pcnet/] (level 2)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/] (level 3)
00:00:00.748 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.748 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.748 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/Config/] (level 4)
00:00:00.748 Am79C973 <integer> = 0x0000000000000001 (1)
00:00:00.748 MAC <bytes> = "08 00 27 bb 10 02" (cb=6)
00:00:00.748 CableConnected <integer> = 0x0000000000000000 (0)
00:00:00.748 LineSpeed <integer> = 0x0000000000000000 (0)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/] (level 4)
00:00:00.748 Driver <string> = "MainStatus" (cch=11)
00:00:00.748
00:00:00.748 [/Devices/pcnet/0/LUN#999/Config/] (level 5)
00:00:00.748 papLeds <integer> = 0x0000000008bbb094 (146518164)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "IntNet" (cch=7)
00:00:00.749
00:00:00.749 [/Devices/pcnet/0/LUN#0/Config/] (level 5)
00:00:00.749 Trunk <string> = "wlan0" (cch=6)
00:00:00.749 TrunkType <integer> = 0x0000000000000003 (3)
00:00:00.749 Network <string> = "HostInterfaceNetworking-wlan0" (cch=30)
00:00:00.749 SharedMacOnWire <integer> = 0x0000000000000001 (1)
00:00:00.749
00:00:00.749 [/Devices/e1000/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/serial/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/parallel/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000004 (4)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainVMMDev" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbbac0 (146520768)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/] (level 4)
00:00:00.749 Driver <string> = "MainStatus" (cch=11)
00:00:00.749
00:00:00.749 [/Devices/VMMDev/0/LUN#999/Config/] (level 5)
00:00:00.749 papLeds <integer> = 0x0000000008bbb0b4 (146518196)
00:00:00.749 First <integer> = 0x0000000000000000 (0)
00:00:00.749 Last <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/] (level 3)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "MainAudioSniffer" (cch=17)
00:00:00.749
00:00:00.749 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:00.749 Object <integer> = 0x0000000008bbb500 (146519296)
00:00:00.749
00:00:00.749 [/Devices/ichac97/] (level 2)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/] (level 3)
00:00:00.749 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.749 PCIDeviceNo <integer> = 0x0000000000000005 (5)
00:00:00.749 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/Config/] (level 4)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/] (level 4)
00:00:00.749 Driver <string> = "AUDIO" (cch=6)
00:00:00.749
00:00:00.749 [/Devices/ichac97/0/LUN#0/Config/] (level 5)
00:00:00.749 AudioDriver <string> = "alsa" (cch=5)
00:00:00.749 StreamName <string> = "Windows XP" (cch=11)
00:00:00.749
00:00:00.749 [/TM/] (level 1)
00:00:00.749 UTCOffset <integer> = 0x0000000000000000 (0)
00:00:00.749
00:00:00.749 ********************* End of CFGM dump **********************
00:00:00.749 MM: cbHyperHeap=0x140000 (1310720)
00:00:00.750 Logical host processors: 2, processor active mask: 0000000000000003
00:00:00.750 ************************* CPUID dump ************************
00:00:00.750 RAW Standard CPUIDs
00:00:00.750 Function eax ebx ecx edx
00:00:00.750 Gst: 00000000 00000005 756e6547 6c65746e 49656e69
00:00:00.750 Hst: 0000000a 756e6547 6c65746e 49656e69
00:00:00.750 Gst: 00000001 000006fd 00000800 00000009 078bf1bf
00:00:00.750 Hst: 000006fd 01020800 0000e39d bfebfbff
00:00:00.750 Gst: 00000002 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Hst: 05b0b101 005657f0 00000000 2cb43078
00:00:00.750 Gst: 00000003 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 00000000 00000000 00000000 00000000
00:00:00.750 Gst: 00000004 00000000 00000000 00000000 00000000
00:00:00.750 Hst: 04000121 01c0003f 0000003f 00000001
00:00:00.750 Gst: 00000005 00000040 00000040 00000000 00000000
00:00:00.750 Hst: 00000040 00000040 00000003 00001110
00:00:00.750 Name: GenuineIntel
00:00:00.750 Supports: 0-5
00:00:00.750 Family: 6 Extended: 0 Effective: 6
00:00:00.750 Model: 15 Extended: 0 Effective: 15
00:00:00.750 Stepping: 13
00:00:00.750 APIC ID: 0x00
00:00:00.750 Logical CPUs: 0
00:00:00.750 CLFLUSH Size: 8
00:00:00.750 Brand ID: 0x00
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 1 (1)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:00.751 DE - Debugging extensions = 1 (1)
00:00:00.751 PSE - Page Size Extension = 1 (1)
00:00:00.751 TSC - Time Stamp Counter = 1 (1)
00:00:00.751 MSR - Model Specific Registers = 1 (1)
00:00:00.751 PAE - Physical Address Extension = 0 (1)
00:00:00.751 MCE - Machine Check Exception = 1 (1)
00:00:00.751 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:00.751 APIC - APIC On-Chip = 0 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 SEP - SYSENTER and SYSEXIT = 0 (1)
00:00:00.751 MTRR - Memory Type Range Registers = 1 (1)
00:00:00.751 PGE - PTE Global Bit = 1 (1)
00:00:00.751 MCA - Machine Check Architecture = 1 (1)
00:00:00.751 CMOV - Conditional Move Instructions = 1 (1)
00:00:00.751 PAT - Page Attribute Table = 1 (1)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:00.751 PSN - Processor Serial Number = 0 (0)
00:00:00.751 CLFSH - CLFLUSH Instruction. = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS - Debug Store = 0 (1)
00:00:00.751 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (1)
00:00:00.751 MMX - Intel MMX Technology = 1 (1)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:00.751 SSE - SSE Support = 1 (1)
00:00:00.751 SSE2 - SSE2 Support = 1 (1)
00:00:00.751 SS - Self Snoop = 0 (1)
00:00:00.751 HTT - Hyper-Threading Technolog = 0 (1)
00:00:00.751 TM - Thermal Monitor = 0 (1)
00:00:00.751 30 - Reserved = 0 (0)
00:00:00.751 PBE - Pending Break Enable = 0 (1)
00:00:00.751 Supports SSE3 or not = 1 (1)
00:00:00.751 Reserved = 0 (0)
00:00:00.751 DS Area 64-bit layout = 0 (1)
00:00:00.751 Supports MONITOR/MWAIT = 1 (1)
00:00:00.751 CPL-DS - CPL Qualified Debug Store = 0 (1)
00:00:00.751 VMX - Virtual Machine Technology = 0 (0)
00:00:00.751 SMX - Safer Mode Extensions = 0 (0)
00:00:00.751 Enhanced SpeedStep Technology = 0 (1)
00:00:00.751 Terminal Monitor 2 = 0 (1)
00:00:00.751 Supports Supplemental SSE3 or not = 0 (1)
00:00:00.751 L1 Context ID = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 CMPXCHG16B = 0 (1)
00:00:00.751 xTPR Update Control = 0 (1)
00:00:00.751 Perf/Debug Capability MSR = 0 (1)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Direct Cache Access = 0 (0)
00:00:00.751 Supports SSE4_1 or not = 0 (0)
00:00:00.751 Supports SSE4_2 or not = 0 (0)
00:00:00.751 Supports the x2APIC extensions = 0 (0)
00:00:00.751 Supports MOVBE = 0 (0)
00:00:00.751 Supports POPCNT = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751 Supports XSAVE = 0 (0)
00:00:00.751 Supports OSXSAVE = 0 (0)
00:00:00.751 Reserved = 0x0 (0x0)
00:00:00.751
00:00:00.751 RAW Extended CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: 80000000 80000008 00000000 00000000 00000000
00:00:00.751 Hst: 80000008 00000000 00000000 00000000
00:00:00.751 Gst: 80000001 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000001 20100000
00:00:00.751 Gst: 80000002 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Hst: 65746e49 2952286c 6e655020 6d756974
00:00:00.751 Gst: 80000003 20295228 6c617544 50432020 54202055
00:00:00.751 Hst: 20295228 6c617544 50432020 54202055
00:00:00.751 Gst: 80000004 30303433 20402020 36312e32 007a4847
00:00:00.751 Hst: 30303433 20402020 36312e32 007a4847
00:00:00.751 Gst: 80000005 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000006 00000000 00000000 04004040 00000000
00:00:00.751 Hst: 00000000 00000000 04004040 00000000
00:00:00.751 Gst: 80000007 00000000 00000000 00000000 00000000
00:00:00.751 Hst: 00000000 00000000 00000000 00000000
00:00:00.751 Gst: 80000008 00003024 00000000 00000000 00000000
00:00:00.751 Hst: 00003024 00000000 00000000 00000000
00:00:00.751 Gst: 80000009 07280202 00000000 00000000 00000503*
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Ext Name:
00:00:00.751 Ext Supports: 0x80000000-0x80000008
00:00:00.751 Family: 0 Extended: 0 Effective: 0
00:00:00.751 Model: 0 Extended: 0 Effective: 0
00:00:00.751 Stepping: 0
00:00:00.751 Brand ID: 0x000
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 FPU - x87 FPU on Chip = 0 (0)
00:00:00.751 VME - Virtual 8086 Mode Enhancements = 0 (0)
00:00:00.751 DE - Debugging extensions = 0 (0)
00:00:00.751 PSE - Page Size Extension = 0 (0)
00:00:00.751 TSC - Time Stamp Counter = 0 (0)
00:00:00.751 MSR - K86 Model Specific Registers = 0 (0)
00:00:00.751 PAE - Physical Address Extension = 0 (0)
00:00:00.751 MCE - Machine Check Exception = 0 (0)
00:00:00.751 CX8 - CMPXCHG8B instruction = 0 (0)
00:00:00.751 APIC - APIC On-Chip = 0 (0)
00:00:00.751 10 - Reserved = 0 (0)
00:00:00.751 SEP - SYSCALL and SYSRET = 0 (0)
00:00:00.751 MTRR - Memory Type Range Registers = 0 (0)
00:00:00.751 PGE - PTE Global Bit = 0 (0)
00:00:00.751 MCA - Machine Check Architecture = 0 (0)
00:00:00.751 CMOV - Conditional Move Instructions = 0 (0)
00:00:00.751 PAT - Page Attribute Table = 0 (0)
00:00:00.751 PSE-36 - 36-bit Page Size Extention = 0 (0)
00:00:00.751 18 - Reserved = 0 (0)
00:00:00.751 19 - Reserved = 0 (0)
00:00:00.751 NX - No-Execute Page Protection = 0 (1)
00:00:00.751 DS - Debug Store = 0 (0)
00:00:00.751 AXMMX - AMD Extensions to MMX Instr. = 0 (0)
00:00:00.751 MMX - Intel MMX Technology = 0 (0)
00:00:00.751 FXSR - FXSAVE and FXRSTOR Instructions = 0 (0)
00:00:00.751 25 - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
00:00:00.751 26 - 1 GB large page support = 0 (0)
00:00:00.751 27 - RDTSCP instruction = 0 (0)
00:00:00.751 28 - Reserved = 0 (0)
00:00:00.751 29 - AMD Long Mode = 0 (1)
00:00:00.751 30 - AMD Extensions to 3DNow = 0 (0)
00:00:00.751 31 - AMD 3DNow = 0 (0)
00:00:00.751 LahfSahf - LAHF/SAHF in 64-bit mode = 0 (1)
00:00:00.751 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
00:00:00.751 SVM - AMD VM Extensions = 0 (0)
00:00:00.751 APIC registers starting at 0x400 = 0 (0)
00:00:00.751 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
00:00:00.751 Advanced bit manipulation = 0 (0)
00:00:00.751 SSE4A instruction support = 0 (0)
00:00:00.751 Misaligned SSE mode = 0 (0)
00:00:00.751 PREFETCH and PREFETCHW instruction = 0 (0)
00:00:00.751 OS visible workaround = 0 (0)
00:00:00.751 Instruction based sampling = 0 (0)
00:00:00.751 SSE5 support = 0 (0)
00:00:00.751 SKINIT, STGI, and DEV support = 0 (0)
00:00:00.751 Watchdog timer support. = 0 (0)
00:00:00.751 31:14 - Reserved = 0x0 (0x0)
00:00:00.751 Full Name: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz
00:00:00.751 TLB 2/4M Instr/Uni: res0 0 entries
00:00:00.751 TLB 2/4M Data: res0 0 entries
00:00:00.751 TLB 4K Instr/Uni: res0 0 entries
00:00:00.751 TLB 4K Data: res0 0 entries
00:00:00.751 L1 Instr Cache Line Size: 0 bytes
00:00:00.751 L1 Instr Cache Lines Per Tag: 0
00:00:00.751 L1 Instr Cache Associativity: res0
00:00:00.751 L1 Instr Cache Size: 0 KB
00:00:00.751 L1 Data Cache Line Size: 0 bytes
00:00:00.751 L1 Data Cache Lines Per Tag: 0
00:00:00.751 L1 Data Cache Associativity: res0
00:00:00.751 L1 Data Cache Size: 0 KB
00:00:00.751 L2 TLB 2/4M Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 2/4M Data: off 0 entries
00:00:00.751 L2 TLB 4K Instr/Uni: off 0 entries
00:00:00.751 L2 TLB 4K Data: off 0 entries
00:00:00.751 L2 Cache Line Size: 0 bytes
00:00:00.751 L2 Cache Lines Per Tag: 0
00:00:00.751 L2 Cache Associativity: off
00:00:00.751 L2 Cache Size: 0 KB
00:00:00.751 APM Features:
00:00:00.751 Physical Address Width: 36 bits
00:00:00.751 Virtual Address Width: 48 bits
00:00:00.751 Physical Core Count: 0
00:00:00.751
00:00:00.751 RAW Centaur CPUIDs
00:00:00.751 Function eax ebx ecx edx
00:00:00.751 Gst: c0000000 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000001 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000002 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Gst: c0000003 07280202 00000000 00000000 00000503
00:00:00.751 Hst: 07280202 00000000 00000000 00000503
00:00:00.751 Centaur Supports: 0xc0000000-0x07280202
00:00:00.751 Mnemonic - Description = guest (host)
00:00:00.751 AIS - Alternate Instruction Set = 0 (1)
00:00:00.751 AIS-E - AIS enabled = 0 (1)
00:00:00.751 RNG - Random Number Generator = 0 (0)
00:00:00.751 RNG-E - RNG enabled = 0 (0)
00:00:00.751 LH - LongHaul MSR 0000_110Ah = 0 (0)
00:00:00.751 FEMMS - FEMMS = 0 (0)
00:00:00.751 ACE - Advanced Cryptography Engine = 0 (0)
00:00:00.751 ACE-E - ACE enabled = 0 (0)
00:00:00.751 ACE2 - Advanced Cryptography Engine 2 = 0 (1)
00:00:00.751 ACE2-E - ACE enabled = 0 (0)
00:00:00.751 PHE - Hash Engine = 0 (1)
00:00:00.751 PHE-E - PHE enabled = 0 (0)
00:00:00.751 PMM - Montgomery Multiplier = 0 (0)
00:00:00.751 PMM-E - PMM enabled = 0 (0)
00:00:00.751
00:00:00.751
00:00:00.751 ******************** End of CPUID dump **********************
00:00:00.775 REM: VBoxREM32
00:00:00.779 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=75
00:00:00.812 TM: cTSCTicksPerSecond=0x7474ed92 (1 953 820 050) fTSCVirtualized=true fTSCUseRealTSC=false
00:00:00.812 TM: fMaybeUseOffsettedHostTSC=true TSCTiedToExecution=false TSCNotTiedToHalt=false
00:00:00.812 CoreCode: R3=b3f47000 R0=f805a000 RC=a02b0000 Phys=0000000035e14000 cb=0x2000
00:00:00.891 [SMP] BIOS with 1 CPUs
00:00:00.928 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xf8151060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xf809c060 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.939 Activating Local APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Enabled APIC
00:00:00.939 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:00:00.939 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.953 Shared Folders service loaded.
00:00:01.003 VDInit finished
00:00:01.003 PIIX3 ATA: LUN#0: disk, PCHS=4161/16/63, total number of sectors 4194304
00:00:01.003 PIIX3 ATA: LUN#1: no unit
00:00:01.003 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 0, passthrough disabled
00:00:01.003 PIIX3 ATA: LUN#3: no unit
00:00:01.003 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:01.103 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:01.204 IntNet#0: szNetwork={HostInterfaceNetworking-wlan0} enmTrunkType=3 szTrunk={wlan0} fFlags=0x1 cbRecv=223232 cbSend=36864
00:00:01.204 PDM: Failed to construct 'pcnet'/0! VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) - The component factory was not found.
00:00:01.214 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
00:00:01.214 One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND)} aWarning=false, preserve=false
00:00:01.220 Power up failed (vrc=VERR_SUPDRV_COMPONENT_NOT_FOUND, rc=NS_ERROR_FAILURE (0X80004005))
Last edited by K-radical (2009-12-07 17:42:13)
wonder wrote:be sure that the modules are loaded. lsmod | grep vbox.
for bridged you have to load vboxnetflt
Thanks a bunch...
sudo modprobe vboxnetflt
did it.
Similar Messages
-
Adding 3 Airport Extremes to Linksys WGT4400N in Bridge Mode Not working
I have a network that starts in a homerun closet and is expanded across 5 acres to differnet locations via CAT5e.
Homerun Closet has Linksys WGT4400N with Cat5e running to three different locations on property. The cables are within length limitations.
1st Airport Extreme N Running in Bridge Mode Connected and Working in Main House
2nd Airport Extreme N Running in Bridge Mode Connected and Working in Guest House
3rd Airport Extreme Replaced with new one Connected and Not Working in Office. This Airport Extreme N is configured just like the others but it cannot see the network. Cables Verified with Testers and Mac Pro at office location, works when ethernet cable is directly connected to system.
Not sure what is going on. IS there s limit to the number of Airport Extreme N's used as bridges?
I have 2 of ther working and the last is not. First Airport Extreme N for office was bad replaced.
Thank You
GldnSabreThe Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router. -
ACE 4710 in bridge mode not working
I am trying to configure ACE 4710 bridge mode and I am stuck up in physical interface configuration. I have configured gig1/2 of ACE as trunk port and on layer 2 switch I have assigned that interface (gig1/2) to VLAN 11. I tried trunk port also but it got disabled due to BPDU error.
I am not able to ping servers as well as gateway. Below are the topology and context configuration:
Router (vlan 13: IP 172.16.11.254)
|
ACE (int gig1/2)
|
L2 Switch
|
Servers (vlan 11: IP 172.16.11.1 and 11.2)
Admin Context
===========
resource-class rc1
limit-resource all minimum 0.00 maximum unlimited
limit-resource sticky minimum 0.20 maximum unlimited
boot system image:c4710ace-mz.A3_2_4.bin
interface gigabitEthernet 1/1
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
switchport trunk allowed vlan 11,13
no shutdown
interface gigabitEthernet 1/3
shutdown
interface gigabitEthernet 1/4
shutdown
access-list ALL line 8 extended permit ip any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
permit
interface vlan 1000
ip address 172.16.16.16 255.255.255.0
access-group input ALL
service-policy input remote_mgmt_allow_policy
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.16.254
context test
allocate-interface vlan 11
allocate-interface vlan 13
member rc1
test Context
=========
access-list bpdu-fixup ethertype permit bpdu
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
rserver host srv1
ip address 172.16.11.1
inservice
rserver host srv2
ip address 172.16.11.2
inservice
serverfarm host srv
rserver srv1
inservice
rserver srv2
inservice
sticky ip-netmask 255.255.255.255 address both SG1
timeout 120
serverfarm srv
class-map type management match-any remote-mgmt
201 match protocol snmp any
202 match protocol ssh any
203 match protocol icmp any
204 match protocol http any
205 match protocol https any
206 match protocol xml-https any
class-map match-all slb-vip
2 match virtual-address 172.16.11.10 any
policy-map type management first-match remote-mgmt
class remote-mgmt
permit
policy-map type loadbalance first-match slb
class class-default
sticky-serverfarm SG1
policy-map multi-match client-vips
class slb-vip
loadbalance vip inservice
loadbalance policy slb
loadbalance vip icmp-reply
interface vlan 11
bridge-group 1
access-group input bpdu-fixup
access-group input ALL
access-group output ALL
no shutdown
interface vlan 13
bridge-group 1
access-group input bpdu-fixup
access-group input ALL
access-group output ALL
service-policy input remote-mgmt
service-policy input client-vips
no shutdown
interface bvi 1
ip address 172.16.11.9 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.11.254
Could you pls. suggest where I am doing wrong?
Thanks,
Pawan" I tried trunk port also but it got disabled" <----- if your L2 config is not correct, nothing will work.
What is the setup on the switch ? Trunk or access vlan ?
What is the status of the interface ? up ? down ?
Do you see something in your arp table ?
Gilles. -
Airport in bridge mode not working in Windows7
Hi everyone,
Last night as I was browsing the web on my iPad the internet stopped working...I am using an Airport Express router plugged directly into the wall socket of my apartment which was configured by the ISP.
I have been using this config for the past 7 months with no issues but last night it just stopped working and the yellow indicator started flashing.
I went into Airport utility and it tells me the Double NAT problem has been found (maybe the ISP changed something?)...and they suggest to change the Airport configuration to Bridge Mode ... said and done...now the Internet works fine under OSX and on my iPad but it does not work anymore in Windows 7.
Some of my family uses Windows 7 for some very specific apps and now it's just dead, internet does not work anymore.
Also, in OSX / iOS I didn't make any changes, I just changed the Airport configuration to Bridge mode and it worked right off the bat.
Has anybody else confronted such problems before ? If so, what would be the best way to fix this ?
Thanks!" I tried trunk port also but it got disabled" <----- if your L2 config is not correct, nothing will work.
What is the setup on the switch ? Trunk or access vlan ?
What is the status of the interface ? up ? down ?
Do you see something in your arp table ?
Gilles. -
Folks,
I am trying to configure ACE in transparent mode and it is not working, i can browse to the servers directly,but when i try to hit the vip , I do not get any webpages, all keepalives are up and everything is in inservice.
hostname abc
boot system image:c6ace-t1k9-mz.3.0.0_A1_6_1.bin
access-list ANY line 8 extended permit ip any any
rserver host rs1
ip address 1.1.1.1
inservice
rserver host rs2
ip address 1.1.1.2
inservice
serverfarm host SF1
rserver rs1
inservice
rserver rs2
inservice
class-map type management match-any REMOTE_ACCESS
10 match protocol telnet any
20 match protocol ssh any
30 match protocol icmp any
class-map match-all VIP
2 match virtual-address 1.1.1.3 any
class-map type http loadbalance match-any src1
2 match source-address 0.0.0.0 0.0.0.0
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match R-Policy
class class-defaut
serverfarm SF1
policy-map multi-match R-LB
class VIP
loadbalance vip inservice
loadbalance policy R-Policy
loadbalance vip icmp-reply active
loadbalance vip advertise
interface vlan 3
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 4
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input R-LB
no shutdown
interface bvi 1
ip address 1.1.1.4 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 1.1.1.5I made some progress, but still it is not working.
When the server behind the ACE module default gateway is set to the firewall, i can telnet to the vip at port 80,but i still do not see the page when i open the browser and point to the vip. here are the outputs.
hostname RBharti
boot system image:c6ace-t1k9-mz.3.0.0_A1_6_1.bin
access-list ANY line 8 extended permit ip any any
rserver host rs1
ip address 1.1.1.1
inservice
rserver host rs2
ip address 1.1.1.3
inservice
serverfarm host SF1
rserver rs1
inservice
rserver rs2
inservice
class-map type management match-any REMOTE_ACCESS
10 match protocol telnet any
20 match protocol ssh any
30 match protocol icmp any
class-map match-all VIP
2 match virtual-address 1.1.1.5 any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match R-Policy
class class-default
serverfarm SF1
policy-map multi-match R-LB
class VIP
loadbalance vip inservice
loadbalance policy R-Policy
loadbalance vip icmp-reply active
loadbalance vip advertise
interface vlan 3
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input R-LB
no shutdown
interface vlan 4
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface bvi 1
ip address 1.1.1.4 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 202.137.232.193
Ri/Admin# sh service-policy
Policy-map : R-LB
Status : ACTIVE
Interface: vlan 3
service-policy: R-LB
class: VIP
loadbalance:
L7 loadbalance policy: Rediff-Policy
VIP Route Metric : 77
VIP Route Advertise : DISABLED
VIP ICMP Reply : ENABLED-WHEN-ACTIVE
VIP State: INSERVICE
curr conns : 0 , hit count : 54
dropped conns : 54
client pkt count : 81 , client byte count: 3888
server pkt count : 0 , server byte count: 0 -
Widgets on my desktop using dev-mode not working in Lion
I'm trying to get iStat back ontop of my desktop like I had in Snow Leopard. Dev-mode not working to bring widgets forward anymore. Any Ideas how to do this in lion? In Snow Leopard it was defaults write com.apple.sashboard devmode YES now that isn't working.
When I connect my MBP (mid 2010) to iMac 27" (mid 2010), via Mini DisplayPorts, after pressing Command+F2, iMac screen went "blank" while MBP screen stays "blue" for few seconds and went back to normal. How to solve this problem?
-
Adobe bridge raw not working with windows vista in photoshop cc, why?
adobe bridge raw not working in photoshop cc, is there a fix?
Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista. -
Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) CanadaHi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Bridge Raw not working, cannot see Raw image in Bridge
The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.
My Photoshop and bridge is CS4, purchased in 2008, and the canon 5D Mark
11, purchased earlier. I have CR2. The camera and software worked
together fine for all those years.
Now, however, when I click Bridge to open a file containing several
images, I do not get thumbnail images, just a circle with CR 2 and the
file name, no image.
If I double click one of the circles, the image will open in camera Raw,
and I can edit, and open photoshop and edit again. If I then save a Jpeg
version, I will be able to open it and see the image in Bridge.
The problem is that now if I shoot 100 pictures, I can open Bridge but
there are no thumbnail images, only CR2 and file name.
I hope this can clarify the problem. Camera and software have not been
changed.
Thank you very much. Please help. -
My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation
And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA
The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.
I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow. -
Blue screen on start up. Safe mode not working?
Blue screen on start up. Safe mode not working, any suggestions?
Thank you, I had forgotten about target mode. I was able to back up all of my files. I also copied some additional 50 GB of files of the disk as a stress test and the hard drive worked fine and quick (and because it was quicker than retrieving the same files from a network drive to my desktop).
I was hoping to also unpack the Applejack files on my desktop and put them back so I could run them in single user mode without running /etc/rc. However I haven't been able to get my Linux desktop to mount the iBook in Read-Write instead of Read-Only yet (I don't have access to another Mac at the moment). -
[SOLVED] Direct Rendering is not working with Catalyst 8.6-1.
I own an ATI Radeon X1300, and everything was working flawlessly with Catalyst 8.5-1, and when I updated the drivers, DRI stopped working. It has happened with me in the past, and the only solution I had found then was to downgrade the drivers. I appreciate your help.
Here is my /etc/X11/Xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 338 270 # 1280x1024 96dpi
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Here is my /var/log/Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux localhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 23 13:57:45 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev f3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev f2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,812a rev f3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:01:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00
(II) PCI: 05:00:0: chip 1002,7187 card 17ee,7187 rev 00 class 03,00,00 hdr 80
(II) PCI: 05:00:1: chip 1002,71a7 card 17ee,7186 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(5:0:0) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] rev 0, Mem @ 0xd0000000/28, 0xfdef0000/16, I/O @ 0x9c00/8, BIOS @ 0xfdec0000/17
(--) PCI: (5:0:1) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (Secondary) rev 0, Mem @ 0xfdee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 05:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x7187) found
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x9fa1880
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[20] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[21] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[32] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[33] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[34] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[35] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "Radeon X1300/X1550 Series" (Chipset = 0x7187)
(--) fglrx(0): (PciSubVendor = 0x17ee, PciSubDevice = 0x7187)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV515
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 5:0.0.
(II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: 13 Serial#: 1850
(II) fglrx(0): Year: 2005 Week: 9
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
(II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 310 x 230 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: 09301850
(II) fglrx(0): Monitor name: Philips 107Et
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c13003a070000
(II) fglrx(0): 090f0103682018782a4f29a057499b26
(II) fglrx(0): 10484ca4420031594559615981800101
(II) fglrx(0): 010101010101ea240060410028303060
(II) fglrx(0): 130036e61000001e000000ff00303933
(II) fglrx(0): 30313835300a20202020000000fc0050
(II) fglrx(0): 68696c697073203130374574000000fd
(II) fglrx(0): 0032a01e480b000a20202020202000b2
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 40 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(**) fglrx(0): Display dimensions: (338, 270) mm
(WW) fglrx(0): Probed monitor is 320x240 mm, using Displaysize 338x270 mm
(**) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 255 MB
(II) fglrx(0): [pcie] 261120 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[7] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[8] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[9] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[11] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[12] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[13] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x00009c00 - 0x00009cff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[24] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[30] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[31] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[32] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[33] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[34] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[35] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[36] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[37] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[38] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0xac000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xab000 at 0xb7653000
(II) fglrx(0): [drm] Closed DRM master.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
(==) fglrx(0): Write-combining range (0xd0000000,0x10000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "abnt2"
(**) Keyboard0: XkbModel: "abnt2"
(**) Option "XkbLayout" "br"
(**) Keyboard0: XkbLayout: "br"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
Last edited by DarkForte (2008-06-23 22:40:05)From your Xorg.0.log:
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You have to quit X, then rmmod and modprobe the kernel module - you're still using the old one. (a reboot would technically fix it too)
# rmmod fglrx
# modprobe fglrx
# dmesg | tail
The dmesg output should say you've successfully loaded the 8.501 driver. -
Time Capsule & Netgear DG834GT in Modem Mode - Not working
I've just taken delivery of a 1TB Time Capsule. I've switched my existing Netgear DG384GT modem/router into modem only mode, so routing functionality is disabled. I just want to use the DG834GT as a simple ADSL modem, whilst utilising the features (DHCP, wireless etc) of the TC.
I've connected the two together, but I can't get a green light on the TC. The DG834GT definitely has an internet connection. I have the TC set to "Share a public IP address", but it doesn't appear to be able to get an ip address from the DG834GT. TCP/IP is set to use DHCP. I've tried everything, without success.
The only way I've managed to get the working together is by re-enabling DHCP and NAT in the DG834GT, and setting the TC to use bridge mode. This is not what I want to do, as my aging DG384GT has problems when too many wireless devices try to connect.
Am I missing something? How can I get the TC to obtain the ip address from the DG834GT? I don't want to have to buy an ADSL modem unless I really need to.
Help!
Thanks in advance
Message was edited by: LBowersWelcome to the discussions!
Can you clarify if you have DSL service there? In other words, when you first setup the Netgear to connect to your service, did you enter your user name and password into the device to connect to the internet? -
Bridge does not work for wireless clients - connecting to existing network.
Hi - I really hope somebody can help out here, after hours of trial & error, I have finally given up
I need to connect my Airport Extreme Base Station to my existing network. I have a linksys router (192.168.15.1) connected to my modem and this linksys router acts as DHCP server too.
I suppose I have to use "bridge mode" for that to work. But should the linksys be connected to the AEBS using the AEBS's WAN or LAN port?
If I use "bridge mode", then wired computers to the AEBS works fine - getting an IP from the linksys etc. BUT, the wireless clients will have a self-assigned IP and not get through to the internet. It's like the AEBS will not allow wireless clients to "get through" unless AEBS itself is handing out IP addresses.
Page 36 of this manual ( http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf ) shows the setup I want. But in the picture, it says "Ethernet WAN port" but the text says: "The Apple wireless device (in this example, a Time Capsule) uses your Ethernet network to communicate with the Internet through the Ethernet LAN port ( <--> )." I don't know which one to use, WAN or LAN - they show WAN but say LAN?
When I set it up as "share an IP address", the AEBS status tells me "double nat" and to change from "shared IP" to "bridge mode". I do that, and everything seems fine - for the wired clients. Now the wireless clients cannot connect, Airport on the MacBook Pro just say "Connection failed" and the MacBook says "Invalid password" (translated from danish), even though I set the Airport Utlity to save the password in keyring, so it should be correct... If I disable wireless encryption, the wireless clients will connect but get a self-assigned IP, and therefor not work (cannot get online)...
It seems the only way I can get wireless to work, is if I set AEBS up as DHCP, but then it won't be on the "same network" as the linksys (192.168.15.1), but rather on 10.0.x.x as I select. If I select 192.168.x.x within AEBS, I'm also getting some error messages, conflict/subnet thing.
Anyway - I really hope somebody knows how to get wireless clients to get an IP address from existing ethernet when connected to the AEBS.
Thanks!!I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?!
Maybe you are looking for
-
i have doubt and need clarification on backup - 1- backup on icloud : is it possible to back up my iphone5s in icloud ? my iphone is having 32Gb and almost 17gb is used ..... ? what is the max capacity available for backup in icloud ? 2- itune back u
-
Urgent help needed in building an expression
hi, I am using expression editor to build the following simple expression. "if inputvalue = 0 then 10 else 20" so Far I have used various forms of "IF" and "CASE" statements but could not successfully create the expression.Could not find anything use
-
I have problem with polish letters after thunderbird reinstalation. Font seems do not see it ..
I can write mails in my native hovewer when i receive feedback Instead of Polish letters i see "chinesse bushes"
-
Calling java beans from forms 6
Could anyone please tell me if it is possible to call an EJB component from within forms 6. And if so how. Thanks
-
Mac Mail "Unread" Column Not Variable in Yosemite
I just made the leap from 10.8 to 10.10 and I've encountered a problem in Mac Mail. Since I prefer the classic view since unread messages can have bold type, I now have a super-wide column for the "Unread" button / "Replied" icon. I cannot adjust the