Visual admin and start/stop dispatcher

What is the normal procedure for starting and stopping dispatcher....
Is it normally done at UNIX through ./go script? and what is the normal way to shutdown j2ee engine....
just wonder what the standard practice was...
Also where do I find the Visual admin tool...is this under the admin filesystem and just run go....
Thanks
John Ryan

Check if you DEFAULT.PFL contain the following entries
SAP Central Service Instance for J2EE
j2ee/scs/host = <host>
j2ee/scs/system = <SCS Inst.No>
j2ee/ms/port = <port>
j2ee/dbtype =
j2ee/dbname = <sid>
j2ee/dbhost = <host>
And the Instance Profile should have the followin entries
Instance Profile
jstartup/trimming_properties =
jstartup/protocol =
jstartup/vm/home =
jstartup/max_caches =
jstartup/release =
jstartup/instance_properties =
j2ee/dbdriver =
rdisp/j2ee_start_control =
rdisp/j2ee_libpath =
exe/j2ee = $
j2ee/instance_id =

Similar Messages

When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Not able to start the Visual Admin and configTool - URGENT

hi Experts,
Hi have installed the portal 7.0 evalution version. But when i am trying start the visual admin. when click on go.bat file. It is giving the following message.
D:\usr\sap\J2E\JC01\j2ee\admin>go.bat
D:\usr\sap\J2E\JC01\j2ee\admin>"C:\j2sdk1.4.2_09\bin\bin\java" -showversion -Dsu
n.java2d.noddraw=true -Duser.language=en -DP4ClassLoad=P4Connection -Dp4Cache=cl
ean -jar "D:\usr\sap\J2E\JC01\j2ee\admin\go.jar"
The system cannot find the path specified.
Program terminated abnormally
Press any key to continue . . .
Even ConfigTool also giving the same problem.
D:\usr\sap\J2E\JC01\j2ee\configtool>configtool.bat
The system cannot find the path specified.
Program terminated abnormally
Press any key to continue . . .
Kindly tell me how to fix the above problems. But I am able to run the SDM Tool and login.
Regards
Vijay

Check if you DEFAULT.PFL contain the following entries
SAP Central Service Instance for J2EE
j2ee/scs/host = <host>
j2ee/scs/system = <SCS Inst.No>
j2ee/ms/port = <port>
j2ee/dbtype =
j2ee/dbname = <sid>
j2ee/dbhost = <host>
And the Instance Profile should have the followin entries
Instance Profile
jstartup/trimming_properties =
jstartup/protocol =
jstartup/vm/home =
jstartup/max_caches =
jstartup/release =
jstartup/instance_properties =
j2ee/dbdriver =
rdisp/j2ee_start_control =
rdisp/j2ee_libpath =
exe/j2ee = $
j2ee/instance_id =

How to log on to visual admin and create destination service

Hi all,
I see this statement everywhere while trying to configure adobe forms.
*it was only the HTTP destination FPICF_DATA_<SID> that was not created in the Visual Admin under Cluster -> Services -> Destinations*_
I got 2 questions here:-
1. the programs "FP_CHECK_DESTINATION_SERVICE" runs fine w/o destination check box. andwith the check box it gives the error "ADS: Request start time: Thu Nov 26 12:07:42 ........". SO how to resolve this. I have checked the blogs before and I did everything so far and stuck at the statement given above in bold.
2. What is this destination fp_icf_data_sid........... where to look for, I understand u need to log on to visual adm. But how is there a sap transaction "AL11" or from the web url. if it is web url ... "http://server_name:port/ ....." then I am lost after this I dont see anything called cluster and services anywhere....
And if am looking for visual admin at wrong places please provide step by step guide. I have seen steps to log on to visual admin on wesites but i dont know what am i doing, thats not clear. If someone can help from here.
Thanks,
Anu.

The Visual Administrator is a Java tool installed during the installation of a Java AS. It is a separate tool that can be copied and used remotely if desired. On a system running Java AS it can be found under /usr/sap/<SID>/JC00/j2ee/admin - just run 'go' under Linux/Unix or 'go.bat' under Windows. You must have Java installed on your remote system.
Once you have logged into your Java AS system using the Visual Administrator you can then setup your "Destinations", located under Server -> Services.
Check Note 944221 - Troubleshooting if problems occur in forms processing ...which will make clear the errors you are experiencing and help you solve them.
Nelis

Locked out of J2EE Visual Admin and other problems

I recently tried to install some Java PDK components using the SDM tool. However it failed when trying to deploy the javadoc component. Since then the following has occurred:
1. My enterprise portal website is unavailable (ERROR: 'Details: Web container not available!').
2. I can't login into the J2EE admin tool (ERROR: 'the object does not exist') using either the initially reset Admin password (as part of the original install) or 'admin'.
3. In the SAP MMC, the Server 0 instance displays yellow, with the jcontrol.exe status (under Process List) as 'some processes running' and server0 (under Process Table) status as 'starting applications'.
4. The log file on the J2EE database is 100% (not sure if this is relevant or not).
I've tried to undeploy the java components in case they are the cause of the above issues but get the following error in SDM:
Info: ***** Begin of SAP J2EE Engine Online Undeployment (J2EE) *****
No information about the J2EE engine cluster is available. The online undeployment process is continuing.
Info: ***** End of SAP J2EE Engine Online Undeployment (J2EE) *****
Error: Undeployment of SDA executed with errors.
Error: See below for details:
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running. com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [server] with user name: [Administrator]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot create new RemoteLoginContext instance.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineAppOnlineUndeployerImpl.checkLoginCredentials.DMEXC)
Error: Result: error
In summary, assuming the new java components broke the EP and J2EE I can't undeploy them (because J2EE is broken) in order to fix J2EE. Damned if I do and damned if I don't.
Does anyone know why I can't login to J2EE VA, why the J2EE server only partials starts up, why the EP is not working, or how I can truncate the database log file?
I'm running EP 6.4 SP9 on W2K3.
Mike D.

Hi Mike,
May be the following link will help you.
J2EE Engine start error: Database initialization failed!
Moreover, make sure that your port no to which connecting through visual admin is around 50000.
Regards,
Bharath

Visual Admin not Starting

Hello,,
I am unable to log into my Visual admin. It says "Cannot open connection on host: 64.13.232.162 & port:51004" .
I dont know which host it is referring to??? That IP is not our servers IP.
I referred many forums andI checked Port Number on Config Tool. Its correct & i tried with different Transport Layer options but nothing is working??
Any help on this???

Hi
First check the Java stack is up or not.
If java is up do the following
open the visual admin
In the connect to sap j2ee Engine screen
Select new
select the lookup method Via message Server
Display name as Test click Next
username : provide J2ee_admin
host : localhost
HTTP Port : 81(scs instance number) which is java instance number
click save
select test and click on connect .
It will direct to the correct Port
Give the password and u will login to visual admin

Visual Admin not starting up

Hi Experts,
i installed Nw SAP 7.0.1,when i trying to login to visual admin or config tool, the path is not working,i set the path for java, but it showing error
error details
E:\usr\sap\PRD\JC00\j2ee\admin>"C:\j2sdk1.4.2_30-x64\bin\bin\java" -showversion
-Dsun.java2d.noddraw=true -Duser.language=en -DP4ClassLoad=P4Connection -Dp4Cac
e=clean -jar "E:\usr\sap\PRD\JC00\j2ee\admin\go.jar"
The system cannot find the path specified.
Program terminated abnormally
Press any key to continue . . .
thanks
venkat

Hi,
If installation completed sucessful, login to sap visual admin will work, if not set the java path correctly your installation will be failed.
check whether j2ee process SDM is running are not , if its not running you can't loging to visual Admin.
Thanks
BM
Do not use text message language
Read the "Rules of Engagement"
Edited by: Juan Reyes on Mar 1, 2011 9:13 AM

Previewing edits and start/stop points

OK, so I'm still new to this program (I've worked with ProTools and Cakewalk, but this is a bit different), so please bear with me. I'm trying to sample and adjust the different plugins for a track, but I'm running into trouble on two different fronts, thus two different questions:
1. Is there any way for me to preview any adjustments I make to the plugins before I implement them into the automation? That way, if I feel like something is wrong, I can simply re-adjust without having to rewrite the automation?
2. How do I select specific starting and stopping points within the track while editing and doing automation? As in, when I press stop twice, it goes back to a specific point in the song (as opposed to the beginning).

Hey Onigami,
we talked about last week here.
Why don't you run the plug-ins on several busses and do a volume automation on the bus?
2. when you see the (yellow line - volume) (press V on seleted track) click on the line with the cursor to add points (dots) then drag them.
Press the loop tool or simply press and drag with the mouse up in the measure bars numbers (light green line) and it loop over the selection.
to resume from the beginning press return, if you don't have the punch in or loop engaged (both green) when you press the space bar twice it should resume from where it stoped, if any of these are on it allways start from the selected point.
Best regards,
Jorge

Error trying to go to Visual C++ and start a beginners project.

Warning 1 Exception from HRESULT: 0x8CE00001 0
This is the warning I get trying to start a new project. Programming is new to me and I have no clue how to fix this. Can anyone help?

Try to re-install the Visual Studio first. I must say it is the problem with the installation.
Have a look at the below link:
http://social.msdn.microsoft.com/Forums/is/vcprerelease/thread/67d65d8d-db42-430f-aeb7-40925cb0c0c8
cheers!!!
Vatsa
www.objectiveprogramming.com

J2EE Visual Admin Tool stops at 99%

Hello everyone,
I have a problem with the Visual Admintool for the J2EE of an EP 6.0 SPS12 Installation on W2k. The tool worked properly before I installed TREX 6.1.
After I connect sucessfully with the admin tool it runs slowly up to 99% and stops here. The Tree of dispatcher and his services are viewable but I cannot expand the server node.
The TREX is running fine, all services are green. The Portal is available and the MMC of Portal shows all green (all services/intances started successfully). I can login and administrate the portal. But I can't configure the TREX for the portal because I can't access the Servernode in Visual Admin.
I checked the logs for the admin tool but there are no errors. The info in admin tool shows no error too. Maybe some additional traces and logs must be first activated.
On the system is a second EP and TREX running but I stopped all other applications, restarted the portal and tried to connect with visual Admin. It stops again at 99%.
Saw some threads with a solution to modify the hosts file or change the heap size of J2EE but no one confirmed that this has helped.
Does someone has an idea what I could check next?
Regards
Alex

Hello Praveen,
thanks for your hint. I checked the note which is very old and only for release 6.20 (I'm on 6.40). I found a similar error in my logs but this error was produced by a failed login and was not releted to my problem. I checked again my logs after but could not find any helpful entry here.
Some more ideas? Looks like a candidate for a OSS message to SAP again.
Regards
Alex

Difference between config toll and visual admin

HI all,
Please let me know all Difference between config toll and visual admin.
and Purpose and how to start.
Thanks & Regards,
satish k

Hi Satish,
SAP J2EE Engine 6.20 provides three basic tools for administration u2013
Visual Administrator,
Console Administrator, and
Config Tool (both Visual and Console).
There are some other tools namely DBTool, Library Tool, RMIC Tool, Shutdown Tool, and User Tool also used.
First part
Difference between config toll and visual admin:-Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster, of the cluster nodes, and all modules running on them.On the other hand with the help of Config Tool you are able to add and configure SAP J2EE Engine 6.20 cluster elements.Again Config Tool can be used without a running SAP J2EE Engine 6.20. The only requirement is to have the server installed on the local machine.
Visual Administrator is written in the Java programming language and can be run in any environment where a Java Virtual Machine is available.On the other hand Config Tool is XML-based, which enables third-party visualizations to be developed or integrated as part of a more complicated configuration system.
Visual Administrator enables remote monitoring and management of the cluster, and for each cluster element, and enables the system administrator to monitor all managers and services working on each node in a single GUI & its online.cofig tool on the otherhand offline.
Second part Purpose
"Visual Administrator":-with the help of this tool you can able to login & logout from the server.It gives you all the details regarding different services running in your SAP server.As already mentioned that with the help of VA we enables administration of the whole cluster, of the cluster nodes, and all modules running on them.
"Config Tool":-Config Tool enables you to run the server in remote debug mode.
Again Config Tool enables you to add dispatcher and server nodes to the SAP J2EE Engine 6.20 Cluster.With the help of config tool we are enable to modification of service or manager module properties.
Third part Start procedure
"Visual Administrator" check the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/23/fa1f1e5f6841cf92c64dc19d79f290/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/e8/f48b33f9a3423c9e688dfa56330e79/frameset.htm
For more Info
http://docs.sun.com/app/docs/doc/819-0698/installconfig-53?a=view
http://help.sap.com/saphelp_nwce10/helpdata/en/6f/258b2ef17d45a4afa45a00309a6a33/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/e8/f48b33f9a3423c9e688dfa56330e79/frameset.htm

Visual Admin Issue

Experts ,
I want to know about Visual Admin and ConFig Tool and in How many ways they are used
list out all briefly ,
Thanks in Advance,
Phani

Hi Phani,
The J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster, all cluster elements, and all modules running on them. It provides remote monitoring and management of managers, services, libraries, and interfaces working on each element in a single GUI
Visual Administrator includes functions for:
a) Obtaining general information about a service, manager, interface, or library (for example, its name, group, and so on).
b) Logging on to the J2EE Engine via the Visual Administrator tool
c) Administrating and changing the properties either specific or common for each service or manager
d) Configuring the global properties
e) Runtime administration and control.
Read out more about its features on [VISUAL ADMINISTRATOR|http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm]
CONFIG TOOL :-
The Config Tool enables offline configuration of the J2EE Engine cluster elements. It is XML-based and allows exporting the system configuration for later use.
When you run the J2EE Engine Config Tool via a GUI or text-only interface, it connects to the database and scans the server configuration. The information provided is passed to the corresponding interface that is used for configuration.
Each change you can perform corresponds to a particular task in the Batch Config tool.
All modifications made using the J2EE Engine Config Tool can be exported to an XML file for later use.
two types:-
a) GUI Config tool :- The J2EE Engine GUI Config Tool enables offline configuration of J2EE Engine cluster elements concerning serviceu2019s and manageru2019s properties, adding new server processes, changing Java parameters, exporting the system configuration to an XML file, and so on.
After installing the SAP Web AS Java, a configtool directory is created, containing a configtool script file. Double clicking on this file starts the Config Tool.
b) Text Only Config tool:- The text-only Config Tool enables you configuration of J2EE Engine cluster elements using a text-only based interface. It enables you to change the cluster element properties, JVM settings, add new elements, export the system configuration to an XML file, and so on.
After installing SAP Web AS Java, a configtool directory is created under <SAP_install_dir>/<system_name>/<instance_name>/j2ee, containing a consoleconfig script file. Double clicking on this file starts the text-only Config Tool.
Read more about config tool on [CONFIG TOOL|http://help.sap.com/saphelp_nw04/helpdata/en/e8/f48b33f9a3423c9e688dfa56330e79/frameset.htm]
Hope this helps,
Regards,
Shailesh

Start/Stop control for itunes

I am in a band and I use itunes to playback my drum tracks. Anyone know of a switch (I'm visualizing a USB start/stop footswitch) which I could use to stop itunes playing? Thanks for your help. Brett

Oh, ya. I know all about that problem. Sorry it is not good news. You will probably need a new phone. Moisture has gotten into the button or the dock port and shorted the home button contacts. Replacing the button will not fix it since it is the contacts on the board that are shot. You can Google fixes for iPhone home button, for more details. There is a rough work around fix of adding a few drops of rubbing alcohol on the button and pressing it 15 times then blowing it out with compressed air. This helped a bit, but did not fix the problem.
Happened to me while I was running a bit of sweat must have gotten in. There and it started happening to me.

How to Get Duration, Start/Stop Time of Each Instance (Run)

Can someone tell me how to get the Duration, as well as Execution Start/Stop times for a given run (Instance) of a Report, stored in History?
For example, on the BO Server in InfoView, I can browse the History of each report, and for each run, I can click the details and view the Duration and Start/Stop times for that run. How do I get that information in Java via the SDK?
Neither IProcessInfo nor ISchedulingInfo seems to have this information.
For example, ISchedulingInfo's Start/Stop Times are for general scheduling (when the report will stop being scheduled). That is not what I want.
I need specific data for a given completed Run, namely its duration and time endpoints. Thanks a lot.

Hi,
fetch the instance of the run like this
IInfoObjects list = infoStore.query(
"select SI_STARTTIME , SI_ENDTIME From CI_INFOOBJECTS Where SI_ID=<instanceIDtoMeasure>"
IInfoObject element = list.get(0);
Date startTime = element.properties().getDate("SI_STARTTIME");
System.out.println("Beginn "+ startTime);
Date endTime = element.properties().getDate("SI_ENDTIME" );
System.out.println("End " + endTime);
long time = ((endTime.getTime() - startTime.getTime()) / 1000);
System.out..println("Runtime " + time + " sec");
You can get the nstanceIDtoMeasure form your Report with getInstances
Enjoy
johannes

Visual admin /config tool opens in a small window

Hi All,
Can any one let me know, how to enlarge my visual admin and config tool. when, I login to any of the windows server to configure on Visual admin tool, they appear very small and I cannot enlarge them. does any one faced this problem before.
Please advice.
Regards,
Satish Narayana.

Hi Satya,
there will be one tab which is on right top corner..Keep the cursor on the tab and drag to enlarge it..
I have faced the same issue and am able to do this.If ur not clear send me ur email i will send u the screenshots.
Regards,
Siva Kumar

Visual admin and start/stop dispatcher

Similar Messages

Maybe you are looking for