When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.
when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.
Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Similar Messages
-
have only had my ipod since march and have followed all instructions on the support page but nothing is working please help
This forum is for those using iPads in large organizations. I'd suggest you ask for help, providing full details about your setup, in the iPod touch forum:
https://discussions.apple.com/community/ipod/ipod_touch
Regards. -
HT1212 when i plug in my phone it says it cant connect to my sisters iphone
i just now created a new email address and a new phone identity
completely uninstall itunes and all its components see this and follow to the T.
http://support.apple.com/kb/HT1923
then download itunes from this link only
http://support.apple.com/kb/DL1615
Peace, Clyde -
My iPhone 4 will not turn on. When I plug it into Itunes it says it is n recovery mode. I try to restore it and the error code code 3194. I have tried all the steps what now?
It is usually given as a communication error between Apple, iTunes (your computer), iPhone. Somewhere they are not communicating, so the iOS you are trying to install cannot be approved by Apple. Trouble shooting steps include, making sure you have Current iTunes installed, make sure your Hosts file of computer is not blocking Apple. Try restoring on another computer.
-
I had to replace my hard drive and now when I plug in my iPad, itunes says it is synced with another library
That is because the iPad can only "sync" to one iTunes library at a time. You can move all of the iPad contents into a new iTunes library. This discussion will give you a lot of useful information.
https://discussions.apple.com/thread/3305461
This one is Mac specific - not that it is any different except for the iTunes menu.
https://discussions.apple.com/thread/3445538?start=0&tstart=0
Remember to authorize the computer in iTunes first - From the iTunes menu go to Store>Authorize this computer. -
i lost my ipod touch at school. i used find my ipod on icloud but it keeps saying offline. when i try to imessage myself i says it cant deliver. is it possible someone hacked it and reset my ipod? and how would i be able to find it if thats the case? PLEAES HELP !!!!!!!!!!!!!!!!!!
Anything is possible.
it could be off or not connected to wi-fi.
It could have been found and restored.
In any of these cases you will not be able to find it. -
My ipod has been disabled for 22,777,704 mintues and when i try to restore it is says it cant be restored because the ipod is locked. there is no where to enter the password. i font have the computer it was originally synced with. help please!!
Hi saraali,
Follow the instructions in the support article link below that best apply to your situation:
http://support.apple.com/kb/HT1212
Cheers,
GB -
my ipod keeps on saying ipod is dissabled connect to itunes and whin i connect it to itunes it says i have to inter a passcode on the ipod to connect to itunes what do i do??
hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks -
My iphone says it needs to be restored but when i try to restor it it says it cant be restored and it has an unknown error
Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[01:41:37.0017] Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[01:41:37.0017] Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[01:41:37.0017] Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[01:41:37.0017] Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[01:41:37.0017] Depth:5 Error:Exception at :0:
[01:41:37.0017] - kBBUReturnTimedOut(8)/16: Pinging timed out
what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
This is the line of the log that appears and when the restoration is correct:
amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
Regards. -
after downloading the 64 bit version of itunes, when i plug my iphone in, it says that i need the 64 bit version software
PLEASE!!! LOLHello Rob,
It sounds like you have installed the 64 bit version of iTunes, but you continue to the get an error message that suggests to download the 64 bit version any time you connect your iPhone. I understand that you have already uninstalled and reinstalled iTunes, but sometimes you may need to uninstall additional components related to iTunes to completely remove it from your system.
I recommend following the steps in the article below to completely uninstall iTunes (click on the link for your version of Windows):
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Once you have completely uninstalled iTunes, you can download the 64 bit version of iTunes for Windows here:
iTunes 11.0.5 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When I Try To Install Itunes it says "IPOD SERVICE failed to initialize"
When I Try To Install Itunes it says "IPOD SERVICE failed to initialize"....What can I Do? Without this i cant open my itunes
hmmmm. what's the precise text of that message? (i can think of some that are close to that, but not precisely the same.)
include error message numbers if you're getting any. -
Look my friend blocked my Ipod so it says "Ipod disabled" "connect to Itunes" so i pulgged my Ipod to my computer but Itunes wont pop in my coputer when i plug in my Ipod. What do i do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
help, my phone says it needs to restore but when i go on to itunes, it says it cant because my phone has a password!!! i cant put the password in because the phone says it needs a restore!!1 catch 22!!! help much appreciated, thank you
Try restarting your router by removing power to it for 30 seconds. This may correct the problem.
-
I just got a MacBook Pro yesterday and I've logged into a few times already but it wont let me now.. Its just shakes and highlights it for me to do again..
I have the 3 year warrenty thing so can i just call them and ask them about itt?Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities > Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A “Reset Password” window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled “Select the user account” if not already selected.
Follow the prompts to reset the password.
Select Apple menu > Restart from the menu bar. -
Went to sync ipod nano 6, says ipod is corrupt and reset. did that,
Went to sync ipod nano 6, says ipod is corrupt and reset. did that, still saying corropt. apple store says its fine, other ipods work on my mac. bought NEW ipod 6...not that says its corrupt.. HELP!!
maybe the file inside ipod is corrupted
try to restore it
Maybe you are looking for
-
IdeaTab Lynx K3011 - Black screen/no display on touchscreen but do get picture through HDMI
Cant see anything on my tablet, however when I connect it to a monitor via an HDMI cable, I can see that its on. It registers touches as well, just doesnt show any picture. How would I go about fixing this? Cheers.
-
Opening new site in dreamweaver
I am trying to open a new site in dw but I already have an icon/folder for "desktop" under "Files". How can I delte it and only keep the new site folder? Thanks a lot.
-
I have a macbook pro retina and a macbook air which I just purchased, I want to share all of the music on the retina with the air.
-
OA Page and AK region .... urgent ....
Hi All, I have an issue involving the AK regions. We are customising a SSHR OA navigation process. At the backstage a workflow is driving the OA page navigation ( Each wf activity being a page and with the next and previous branches). Some activities
-
Uploading new objects in existing Project
Hi Everyone. I need to know whether we can use Mass Excel upload (DPR_DX_PROJECT) only once to create a Project along with its objects or can we use it again to add further objects (viz. phases, tasks, checklist, checklist items etc) to existing proj