Visual Business Problem

Hello,
I have a problem with a new installed Visual Business Tool (Screenshot) in SAPGUI Side Panel.
I doesnt react (only blue field). By mistake I switched off the log (Trace 0) and I cant see Logs anymore. Do you know how I reactivate the log? ActiveX Elements are installed and scripting is active.
It seems to be the component like in the link below:
Active Component Framework (ACF) - Web Dynpro ABAP - SAP Library
Regards
Mike

Thanks Uwe!
the trace is active after filling in this table. I created the new certificate and saved it localIy. After that I activated the business function FND_VISUAL_BUSINESS in SFW5 and now I get a white screen and following errors. My problem with side panels is to send the right data string / Tag from Dynpro Screen to Side Panel using table NWBC_VC_GUI_TAG. The data doesnt show in side panel after calling the transaction. How can I test the data flow? I used the SAP GUI Property Collector.
Thanks a lot!
Mike

Similar Messages

Routing in Visual Business

Hi,
I would like to do routing in Visual business. It seems the only way to draw a path is to use polygon class and provide lat long for all the points where road turns (intermediate points also in case of an arc so that it's rendered realistically). Most routing service provide turn by turn navigation which are not suitable for drawing polygon as the actual road and the polygon line would be way off the mark between two points which are good distance apart.
For ex the following manuevre from mapquest
                        "signs": [],
                        "index": 4,
                        "maneuverNotes": [],
                        "direction": 3,
                        "narrative": "Take Eastern Freeway.",
                        "iconUrl": "http://content.mapquest.com/mqsite/turnsigns/rs_slight_right_sm.gif",
                        "distance": 8.216,
                        "time": 469,
                        "linkIds": [],
                        "streets": [
                            "Eastern Freeway"
                        "attributes": 128,
                        "transportMode": "AUTO",
                        "formattedTime": "00:07:49",
                        "directionName": "Northeast",
                        "mapUrl": "http://open.mapquestapi.com/staticmap/v4/getmap?key=Fmjtd|luur2hua2q,as=o5-9wax0z&type=map&size=225,160&pois=purple-5,18.957824,72.842689,0,0|purple-6,19.042652,72.90866,0,0|&center=19.000238,72.8756745&zoom=7&rand=119631863&session=5413f1a3-0007-0002-02b7-4cdb-00163e5c1556",
                        "startPoint": {
                            "lng": 72.842689,
                            "lat": 18.957824
                        "turnType": 1
would result in straight line for a distance of 8.2 miles whereas the actual road has lots of bends.
How do we get around this problem?
Is there any free service which would give long list of lat longs which are say 100 metres apart?

Hi,
It depends on the map provider service which polygone you receive. Some map providers provide only points where you as a driver have to leave the current road. Some have additional points which follow the actual road and provide a realistic route on a map.
It depends in most cases of a parameter which type of return polygone you get.
Some vendors provide a different routing service for getting more points.
Visual Business itself doesn't include an own routing service - we have an oData service as an single access point for applications and this service calls an external map provider.
So it depends on your map service provide and the parameter of your service call.
Since each provider has their own format, you have to look into their documentation how to achieve this.

How to create interactive map in SAP Visual Business using SAP UI5 SDK

Hi,
Please tell me,
How to create interactive map in SAP Visual Business using SAP UI5 SDK.
Is it possible to create interactive map using VB Control in SAP UI5 SDK..?
if possible please any one let me know.

Hi folks, one question:
We have our development close moved and now it is earlier than originally planned.
That means that we maybe can't finish our convenient API and you have to wait till we will release it - early 2015 is planned.
But there is another option:
Currently we have a API based on json. The developer has to create json and to transfer it to the Visual Business control.
This interface is more used as a low level API and we are developing on top the more convenient one. So all the features are the same.
It will stay stable & compatible in the future and you can build on it.
Do you want to use this interface?
Then I will publish the documentation.
Let me know.
Thanks

API Reference of SAP Visual Business Geo Maps - SAP UI5

Hi,
I came across a blog post written regarding making SAP Visual Business available on SAPUI5 (since version 1.18) and also came across few demos at this link.
But I am not able to find any API documentation regarding this.
We are working on a small POC using SAP Fiori/SAPUI5, in which we want to make use of maps.
Could anyone please let us know as to where we can find more info regarding the API reference, documentation or some examples with sample code.
Thanks,
Vinay C

Hi Ella,
Indeed we have! We posted a guide on Client side development: UI5 Development with Visual Business
This will explain the basics and is more usable then the plain API doc in the demo kit.
Cheers Uwe

SOLUTION TO BUSINESS PROBLEM IN INVENTORY

Hi all
PROBLEM DESCRIPTION:
When a driver from the warehouse/Inventory collects all the goods to distribute them to different stores He signs the paper and then leave. This signing of the paper is creating a lot of problem as they have to keep this hard copy and this in turn is piling up. any solution to this business problem.
thanks a lot in advance.

To make a long story short, I went through 5 MacBooks before getting my macbook pro. I exchanged them for various reasons (they were all Rev A, just after they came out). Three out of the five had the vibration problem. Two were rock solid, but had other problems. I sent in one of them that had the vibration specifically to have it fixed. It came back with a new HD, and still vibrated like crazy. My guess is that some unknown part of the build process randomly makes some of the cases unable to dampen the hd vibration. It's just luck of the draw. If you really want to get rid of it, I suggest sending it in repeatedly. If they don't fix it in three tries, you will be the proud owner of a brand new macbook, which hopefully, won't vibrate. Good luck.
Also, if you want, look up some of my previous posts, I have posted on this many many times in the past.

Visual Business in Enterprise Asset Management

Visual Business seems a convenient way to display enterprise asset management data in a geospatial form within Web Dynpro. I can see that some work has already been done in the ERP system to support Visual Business in the enterprise asset management area - see Package EAMS_VB.
I've not been able to find is any collateral materials that outline the capabilities or intended capabilities of Visual Business in EAM. Is anyone able to point me to such materials?

Hi Andrew,
you can get more information by writing to [email protected]
The space is being extended and we don't have the specific content available at the moment.
Thanks
Ralf

Using Visual Business Control in UI5

Hi Experts,
I used the visual Business Control to create an interactive map in my screen but im getting an error.
The error say "Failed to load resource: the server responded with a status of 404 (Not Found)".
Please help me out with this.
Waiting for you help,
Regards,
Pruthvi G N.

copy paste the code snippet please .

Visual Business FPM Test Application not working

Experts,
Urgent Help required!
We are using EWM System for our VB Application Development.
When we open the Geomap test application in SAP Gui its showing up perfectly fine.
But at the same time when we try to test the standard FPM Test Application its not showing zoom toolbar,application toolbar nor the map.PFB :
Kindly suggest what could be missing or is there something else which needs to be done at FPM level.
Regards
Siju

Hi Experts,
At the same time my browser is throwing me an exception 'SAP Visual Business Security Issue' which
is preventing the visual business to open.
Please help!
Regards
Siju

HT5429 I am having visual scratches problem while entering my apple id password in app store..

I am having visual scratches problem while entering my apple id password in app store..i am really worried...how can i solve this problem??

How would anyone here know what Apple is planning?
What jailbreak type did your prior iPhone have? I don't have this problem. Restore your phone in iTunes as as new (no backup)

Visual Voicemail problem on 02-UK, anyone else??

I'm having a problem with my iPhone 3GS atm.
Its to do with Visual Voicemail, basicly when some one leaves a message the phone doesn't inform me of it like it used to do a few weeks ago.
If i turn the phone off with the red slider and power back up it detects them instantly and they are there to view as normal.
I have phoned O2 and they have told me to turn VM off then on again with the 1760 and 1750 numbers, that didn't solve it. They have told me to reset my network settings this didn't fix it either. As of now they don't know what else to try as it is working its just the phone isn't retrieving them while its on.
Updated to 3.0.1 the other day could be this but cant see how.
The US network has a problem it seems with this atm.
I can hold down the "1" and check for messages manually but its not ideal.
All i can do now is take it to an Apple or O2 shop to see if the phone is broke somehow but i don't think its this its a network thing i am sure.
I never lose the 3G signal so its not that and roaming is 'off' which is what O2 told me to set it at. (i have tried it with it on as well)
I can make calls etc fine, i can use the net just fine. I have turned wireless mode off and tried it while connected to my wireless network.
Can anyone else test theirs and report back by just ringing their own phone plz???

I seem to have found a solution that works for me:
The problem seems to be occuring only after I delete unheard visual voicemails... I, then, don't seem to be able to receive new voicemails until I turn my iPhone off and back on (or do a hard reset).
However this problem doesn't occur if I listen to my messages before deleting them...
So bottomline: listen to your messages entirely and before you delete them...
Calling my usual voicemail number (not using visual voicemail) to listen to messages that haven't gotten to my visual voicemail seem to reset everything and enables me to receive new visual voicemails...

Visual Voicemail Problems

Back when we were able to download the visual voicemail on our phones, I followed the steps it said, which including restoring my phone. I did that but I had the problem where people would leave me voicemails and it would not show up. The only way I would know if their was voicemails was by holding down 1 and checking it that way. I hadnt resolved the issue. And now last night I had downloaded the new iso4 software and it is all installed correctly I thot, but when I try access my visual voicemail it says "voicemail unavailable - could not authorize access". If I got into my settings and change voicemail password it does the same thing. Why am I getting this message? I am confuzed. Please help.

If your not getting your Visual VM just delete all of your old voicemails, then clear the deleted list and all of your voicemails will pop up in Visual VM again.
I still have no idea how Apple & AT&T dont QA test all of the new software updates and would believe its due to Apples insistence to launch new software on an archais system

N78 Visual Radio problem - stops for 5 secs then r...

Good evening,
My Nokia N78 is showing some strange behavior lately.
When I listen to Visual Radio after about 2-3 mins of playback the sound completely stops for about 5 seconds then it starts again.
Any idea about what is causing this problem? Is it software or hardware related?
I have v30.011 RM-235.
Thank you.

I have concluded that AppleTV has some proprietary air interface/DNS issues. But I have found two fixes.
1. Deploy an Apple Airport (Express) Access Point (AP) and use that it to connect both the the ATV and your IOS device. Whatever proprietary protocol WiFi issues exist with AppleTV, they are fixed when you use an Apple AP.
2. Hardwire the AppleTV using its Ethernet port. (Preferably use a fixed IP address vs DHCP). If the ATV is too far from your router to connect via a cable try using a D-Link (DHP-302) HPNA unit that uses the house electrical wiring create an ethernet LAN. (about $70). If you have Bell Canada's brilliant wireless Fibe TV service then your are in luck. There is an ethernet port at the back of each (Motorlola 2502) Set Top Box. Plug in your ATV and all will be fine.(hats off to CC)

JPA & visual JSF problem

Hello, everybody :),
I'm new to Java Web Development, and I'm in big trouble, :) and I'm on the edge of despair. I'll appreciate any help.
Here is the problem - I've been trying for hours to do something like [ this|http://www.netbeans.org/kb/60/web/web-jpa.html] tutorial example but it is not working for me!
I've changed it a bit - I'm using MySQL, I created a few Entity classes from the database, I created controllers from them (right click -> JPA controller Classes from Entity Class). I've bounded the table (from the example) as it was said and then I tried to run the application - it started but the table was emplty and in it was written that "No items found". I 100% sure that the table in the database is not empty and there are no error messages.
I tried to debug the application then I saw that when I go to the updateUsers() mehtod in the entity class controller and I try to get the EntityManager something crashes and I go straight to the calling SessionBean1 with NULL as a user list - can you help me?
Something more, when I create new Web project and I create the Entity classes from the database - the one that I'm having problem with for the Persistence example, and I create JSP pages for the entity classes - (you know just right click + .....) and the CRUD application is working just fine - I don't understand what is wrong with my trial to use the Java Persistence API Within a Visual Web JSF Application?
Thanks in advance!
P.S. Sorry for posting this topic again - I thing is the better place to get answer.
Edited by: GGeorgieva on Jan 1, 2009 3:40 PM

You're right again - can you help me with finding the reason for this, I'll paste some of the server log:
It is the database? I guess? But how could it be - I've been working with that very DB from another Web Java Application?
So is there a RIGHT way to connect to MySQL DataBase from a JavaSE project, which we have connected to a Web Java Application?
javax.persistence.PersistenceException: No Persistence provider for EntityManager named aPU: Provider named oracle.toplink.essentials.PersistenceProvider threw unexpected exception at create EntityManagerFactory:
oracle.toplink.essentials.exceptions.PersistenceUnitLoadingException
Local Exception Stack:
Exception [TOPLINK-30005] (Oracle TopLink Essentials - 2.0.1 (Build b04-fcs (04/11/2008))): oracle.toplink.essentials.exceptions.PersistenceUnitLoadingException
Exception Description: An exception was thrown while searching for persistence archives with ClassLoader: WebappClassLoader
delegate: true
repositories:
/WEB-INF/classes/
----------> Parent Classloader:
EJBClassLoader :
urlSet = []
doneCalled = false
Parent -> java.net.URLClassLoader@f66abc
Internal Exception: javax.persistence.PersistenceException: Exception [TOPLINK-28018] (Oracle TopLink Essentials - 2.0.1 (Build b04-fcs (04/11/2008))): oracle.toplink.essentials.exceptions.EntityManagerSetupException
Exception Description: predeploy for PersistenceUnit [aPU] failed.
Internal Exception: Exception [TOPLINK-7250] (Oracle TopLink Essentials - 2.0.1 (Build b04-fcs (04/11/2008))): oracle.toplink.essentials.exceptions.ValidationException
Exception Description: [class classes.Person] uses a non-entity [class classes.Phone] as target entity in the relationship attribute [private java.util.Collection classes.Person.phoneCollection].
"     at oracle.toplink.essentials.exceptions.PersistenceUnitLoadingException.exceptionSearchingForPersistenceResources(PersistenceUnitLoadingException.java:143)"
"     at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:169)"
"     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:110)"
Caused by: Exception [TOPLINK-28018] (Oracle TopLink Essentials - 2.0.1 (Build b04-fcs (04/11/2008))): oracle.toplink.essentials.exceptions.EntityManagerSetupException
Exception Description: predeploy for PersistenceUnit [aPU] failed.
Internal Exception: Exception [TOPLINK-7250] (Oracle TopLink Essentials - 2.0.1 (Build b04-fcs (04/11/2008))): oracle.toplink.essentials.exceptions.ValidationException
Exception Description: [class classes.Person] uses a non-entity [class classes.Phone] as target entity in the relationship attribute [private java.util.Collection classes.Person.phoneCollection].
"     at oracle.toplink.essentials.exceptions.EntityManagerSetupException.predeployFailed(EntityManagerSetupException.java:228)"
"     ... 87 more"
Caused by: Exception [TOPLINK-7250] (Oracle TopLink Essentials - 2.0.1 (Build b04-fcs (04/11/2008))): oracle.toplink.essentials.exceptions.ValidationException
Exception Description: [class classes.Person] uses a non-entity [class classes.Phone] as target entity in the relationship attribute [private java.util.Collection classes.Person.phoneCollection].
"     at oracle.toplink.essentials.exceptions.ValidationException.nonEntityTargetInRelationship(ValidationException.java:1140)"
"     at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataValidator.throwNonEntityTargetInRelationship(MetadataValidator.java:321)"
"     ... 86 more"
The following providers:
oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider
Returned null to createEntityManagerFactory.
"     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:154)"
"     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:83)"
"     at cntrllrs.PersonJpaController.<init>(PersonJpaController.java:33)"

Visual Admin problem

Hi All,
We have an issue where a series of Windows security patches were applied to a WIN2K3 server and Visual Administrator (among other services) will no longer function.
Could you please help me what could be the problem?
Thanks in Advance
Kiran

What are the errors? You have to give us something to help you with.

WAS visual Admin. problem.

Hi,
The problem occured after the following setting was changed.
Recent change done in WAS:
In Visual Admin>> Services >> Security Provider >> Policy Configuration >> J2EE-Engine, the authentication was set to "no". Most probably this has been changed to "ticket" authentication template and the ticket template contains only "EvaluateTicketLoginModule" login module.
Thank you,
Laxmikant

The problem been?...
Not enough information
Read the "Rules of Engagement"
Regards
Juan

Visual Business Problem

Similar Messages

Maybe you are looking for