Visual C++ 6.0 error with Measurement Studio ActiveX controls

Hi,
I'm triyng an evalutation version of Measurement Studio for VC++ 6.0 for my company.
I'm working on a single document application with a menu bar.
I have several dialog linked to the menu bar but, at run time, the application crash with memory leaks error.
This problem appear only if I attach a Measurement Studio controls on the dialog.
If I add a control on the main document this error don't appear.
Could you help me?
Is there some Measurement Studio patch solving my problem?
Thanks a lot
Federico Bettin
Applied Materials - Baccini spa

Thanks Lucius for your help but I'm not developing any software code!
.... I think this problem depends on the installation or the software version .... I think and I hope !
I'm very doubtful because I would like to buy the Measurement Studio for my company ..... obviously, before I have to solve this problem .......
Bye
Federico Bettin
Applied Materials - Baccini spa

Similar Messages

Error with Windows Media Player ActiveX control

When I try to drop in a Windows Media Player control I get an error:
"Error loading type library/DLL"
Any ideas?

If upgrading is out of question. Like a budget stopping it. You could try to this http://www.microsoft.com/download/en/details.aspx?id=8002 That will allow you to run XP inside windows 7. It is also other media players like VLC and Apple quick time that have ActiveX controllers. I have tested the Quicktime version and it is quite good.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Measurement Studio ActiveX graph control vs LabWindows graph control

Hello,
we are redesigning our software and in this context we are deliberating whether to replace the LabWindows CVI graph controls with the Measuremnt Studio ActiveX graph control in our software. Can we be sure that the ActiveX Graph control provides the same functions as the LabWindows CVI grahp control? We are using almost everthing of the graph control. Is there any documentation about the differences?
The other question for us is: is the ActiveX graph control just as performant as the LabWindows CVI graph control?
Thanks for reply
InoSw

Now I understand. In that case, the MStudio ActiveX control probably will work better for you. We don't have any side-by-side comparisons of the graph controls, but I can tell you that the ActiveX graph does support Cursors and I am not aware of any specific limitations to the ActiveX graph compared to the CVI graph. We also do not have documentation for those controls online, so you will have to install Measurement Studio in order to view the help for those controls.
When I said that MStudio is now targeting .NET, I mean that Measurement Studio no longer supports VB 6 or C++ MFC and only supports .NET. This may change in the future as technologies change, but for now the focus is on .NET support. Primarily C# and VB .NET. You can use the Measurement Studio .NET class libraries in Managed C++, but you will not have assistance from Measurement Studio's Visual Studio integration features. Also, all the help and support resources are for C# and VB .NET, so there are no examples or code snippets to help you get started. Even though Measurement Studio for C++ MFC is now legacy, you will likely have a better expereince with unmanaged C++ than Managed C++. However, I have never worked with QT before, so I cannot comment on that.
National Instruments
Product Support Engineer

I need a little help help with the Spreadsheet 9 ActiveX control

Here's the situation: I want to import data from an Excel file to the MS Office Spreadsheet 9.0 ActiveX control on the LV front page. I can retrieve the data just fine but I can't get it to display in the control on the front page. I can select a range and when I try to write to the Value property I find that I cannot. The problem seems to be the Value property itself cannot handle 2-D data arrays. I can select a 2D range and write a single value which gets written to every cell in the range but when I read the data I get only the first cell in the range and an error if I try to caste the Variant output to a 2D array.
I've noticed a Value2 property for the range when actually working with Excel but I haven't been able to determine where or if it exists for the Spreadsheet 9 control. I've attached a little test program to better show what I'm experiencing/talking about. Anyone have any suggestions on this? It seems like it would be possible or else why have the control there but I haven't found a way around it. Thanks in advance.
Gary D
Attachments:
spreadsheet 9 test.vi ‏41 KB

Jack J. wrote:
Hey Gary,
What version of MS Office does the 9.0 ActiveX control come with. I have version 11.0 here. I could get your program working on my computer but I had to reinitialize the activex control to the 11.0 control. I also had to reselect the properties. All the properties are essentially the same except Value. In this ActiveX version, I see the Value2 property (the Value property does not exist). And your method of reading and writing to the Value2 property handles 2D arrays.
If you can tell me what version of Office you are using, I will try to find a computer with that version and try your program.
Jack J.
Applications Engineer
National Instruments
Most of the computers have Office 2000 which uses the Value property and the Spreadsheet 9.0 control. I too have been able to duplicate it ona computer with Office 2000 (Spreadsheet 11.0). I think it may just be a functionality of the Excel version though for some reason if I use Excel and go through the song and dance with the methods and properties, I get to the Value2 property.
After writing that it seems weird that using Excel properties and methods gets me to the point where I can select the Value2 method and read/write accordigly, but with the Spreadsheet 9.0 control (which, I assume is simply embedding Excel in the app) I get to a different set of properties. Perhps Spreadsheet 10 (or 11) is on the computer but not showing up? That's the only sensible conclusion I can come to, though it seems weird for it to not show up on multiple computers which effectively kills that idea anyway.
Anyway. thanks for any help you can provide.

Problems with automation open for activex control

Hi,
I want to open an ActiveX Control (.ocx-file) with the Automation Open function. This .ocx file was successfully registered by using regsvr32.
The VI is working fine after using Automation Open and all the contained classes are accessible.
However, after saving the VI and opening it again the error 2147221164 appears and the program failes - referencing the object new at the Automation Open functions solves the problem, but only till the next reopening of the VI.
Hope somebody has a solution for this "instability"...
Sorry for bothering and thanks for any help!!!

Hi smercurio_fc,
originally i had a dll written in c++ which contained classes - i wrapped this in a activex control to have access via labview. Im calling the activex control with the automation open function in same VI in which i am also using property nodes and invoke nodes to have access to the classes and methods...
But as i told before, it happens that Automation Open fails, when starting the VI again after closing(saving), even so it was working perfectly fine before...
Thanks for your response...

IMicrosoft Visual C++ Runtime Library error with iTunes 7.3 (?)

When I attempted to launch iTunes this morning, I got the following message (cut and pasted into notepad):
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: E:\Program Files\iTunes\iTunes.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
OK
ITunes then closes down before I can check which version I'm running (think it's 7.3). Does anyone know what is going on?
I haven't installed any software since closing it down last night, and I have rebooted since the error first appeared but it keeps occurring.

Just installed iTunes 7.3 only to constantly see an "error -50" message pop up every 10-15 seconds. How can this be fixed without losing all my "View Options" and data? I've researched Support page to find many others with the same problem, except your solution. How do you uninstall iTunes 7.3 in order to reinstall it?

How to connect CFP-2000 with Measurement Studio

Hi, I have already posted this question into Measurement Studio for VC++ group but probably the right one is this.
I haven't understood how to connect a CFT-2000 module with Measurement Studio and VC++.
Can any one help me to find documentation and sample related this task?
I'm interested into this topics:
- is it possible to manage a CFT-2000 ethernet device with MAX? In ordere to use that device can i use DAQmx?
- which kind of data I will receive over ethernet raw, scaled..
- is it possible to select one particular board of AI?
- is it possible to execute multiple application (LabView and measurement Studio) connected with the same CFTP-2000 controller into one PC?
Any help is appreciate
Thanks
Roberto

Ravens Fan wrote:
It's also possible that you messed up the experiment!
That's True.
But a good experiment shuold always be falsifiable.
FiloP
It doesn't matter how beautiful your theory is, it doesn't matter how smart you are. If it doesn't agree with experiment, it's wrong.
Richard P. Feynman

Why do I get a MissingManifestResourceException when I try to use an MFC Control Wrapper in a Windows Forms Project with Measurement Studio 7.0?

I can use the .NET Windows Forms Controls without problems, but when I try to add an MFC control, everything appears to work fine until runtime. The program throws the aforementioned exception claiming that the resources haven't been added to the compiled project. Any help is appreciated. Thanks.
Victor

That is correct that you will need to create an interop wrapper for the 3D graph ActiveX control if you want to use the 3D graph in a Windows Forms project. However, data types like CNiReal64Vector are only in the C++ interfaces and are not in the ActiveX interface, hence you can use normal .NET data types and will not need to create the C++ data types. The interop wrapper will convert the .NET data types to the expected ActiveX data types and will pass those data types on to the ActiveX control. For example, here is a C# example that demonstrates how to plot a dual sine surface on the interop wrapper of the 3D graph:
const int size = 40;
double[] xData = new double[size];
double[] yData = new double[size];
double[,] z
Data = new double[size, size];
for (int i = 0; i < size; ++i)
xData[i] = yData[i] = ((i - 20.0) / 20.0) * Math.PI;
for (int i = 0; i < size; ++i)
for (int j = 0; j < size; ++j)
zData[j, i] = Math.Sin(xData[i]) * Math.Cos(yData[j]) + 2.0;
graph3D.Plot3DSurface(xData, yData, zData, Type.Missing);
- Elton

ITunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working

iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
                Abort    Retry     Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name           OEMID Value     OEMTableID Value
APIC                                    ALASKA
A M I
FACP                                   ALASKA
A M I
HPET                                    ALASKA
A M I
MCFG                                 ALASKA
OEMMCFG.
SSDT                                    AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>

Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
          File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned.                                           0
unindexed files recovered.                                       CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
     43468 KB in 21139 indexes.
         0 KB in bad sectors.
    253139 KB in use by the system.
     65536 KB occupied by the log file.
1905048300 KB available on disk.
      4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts.

B575: Microsoft Visual C++ Runtime Library Error on Startup? Please Help!

This came out of the blue, I just started up my laptop and out of no where my Windows 7 Ultimate transperancy graphics are gone and I can't connect to the internet! I get this message on startup saying 'Microsoft Visual C++ Runtime Library Error', for controlhandler.cpp and I have no clue what it is! I tried a clean boot and safemode boot, and it is the same thing! Please help
Solved!
Go to Solution.

hi ironmax,
As a last resort, you can:
1. Press the One Key Recovery button to restore the unit from factory settings or
2. Create a recovery disc and use this disc to restore the system from factory
Note:
Backup important before doing a factory reset
Regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Microsoft Visual C++ Runtime Library Error in T430S during HP printer install

I just bought a T430S Windows 8 and I'm having problems installing the software and drivers for my HP Photosmart D-110-a printer. I've owned the printer for a year and it was no problem installing the software that it came with on my previous Dell Windows 7. Every time I try to install from the CD-Rom or download the software from HP, I get a Microsoft Visual C++ Runtime Library Error message. Please someone help!
By the way, I am able to print to the machine because I think HP printer driver was preloaded on the Start screen from Lenovo. Is it possible the reason why I can't install the software that the my HP printer came with, is because HP driver was preloaded? The issue of not being able to install the full software, is that I can't monitor ink levels or scan items from the computer.

It looks to me like HP never made a windows8 driver for that printer. You might read this:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/windows-8-driver-hp-p...

Visual C++ runtime library error when generating printed documentation from RH9

I just upgraded a project from RH 7 to RH 9. I tried generating printed documentation in Word from it, but as soon as the Printed Documentation dialog opened, a Visual C++ Runtime Library error displayed. RoboHelp stopped working and I had to restart.
I tried using one of the sample projects -- same thing happened.
I then created a brand-new project. This time, opening the Printed Documentation dialog worked. I selected "Generate Word Doc" and the .docx extension, since I have Word 2010, and tried to generate printed documentation. However, the following message then displayed: Cannot find Microsoft Word installed on your system.
So I have two questions:
- How can I avoid crashing RoboHelp when generating printed documentation?
- How can I ensure that RoboHelp finds the Word 2010 installation on my system?
Thanks for any help!
OK, just played around a bit more and I was able to help myself on the first question:
- I created a new Printed Documentation Layout in the Single Source Layouts pane, and from there I was able to generate .pdf files, without encountering the Visual C++ runtime error.
- But the "Cannot find Microsoft Word installed on your system." msg still pops up when I try to generate .docx files. (When I generate .doc files, they have no content.)
Message was edited by: mizotto

First the fact that the problem is with old layouts suggest they were using an old template.
The PDF creation relies on a Word document being created in the background. The fact that you cannot generate a good doc or docx makes it odd that you get a PDF. The PDF is OK I take it?
I'm wondering if you have not applied the 901 patch and are running Word 2010 64 bit?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error with php_oci8.dll

Hi everyone.
I have the following error with the php_oci8.dll (apache error log):
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\\Program Files (x86)\\PHP\\ext\\php_oci8.dll' - %1 is not a valid Win32 application.\r\n in Unknown on line 0
There are the current configuration:
php.ini:
[PHP_OCI8]
extension=php_oci8.dll
Set:
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\saud.gonzalez\AppData\Roaming
CLIENTNAME=BOGGONZAS01P1
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=CT1APLMICURAR01
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\saud.gonzalez
JAVA_HOME=C:\Program Files (x86)\Java\jdk1.6.0_02\bin
LD_LIBRARY_PATH=C:\oracle\client\11.1.0\instantclient
lib=C:\Program Files\SQLXML 4.0\bin\
LOCALAPPDATA=C:\Users\saud.gonzalez\AppData\Local
LOGONSERVER=\\CT1APMICSENDC1
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\oracle\client\11.1.0\instantclient;C:\Program Files (x86)\PHP\;C:\oracle
\client\11.1.0\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Pr
ogram Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft
SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\
binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files
(x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (
x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;c:\Program Files\M
icrosoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Java\jdk1.6.0_02\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PHPRC=C:\Program Files (x86)\PHP\
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
PUBLIC=C:\Users\Public
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\SAUD~1.GON\AppData\Local\Temp\1
TMP=C:\Users\SAUD~1.GON\AppData\Local\Temp\1
USERDNSDOMAIN=DATACENTER.LOC
USERDOMAIN=DATACENTER
USERNAME=xxxx
USERPROFILE=C:\Users\xxxx
VISUALSVN_SERVER=C:\Program Files (x86)\VisualSVN Server\
VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
windir=C:\Windows
The current config:
IBM x3650
Windows 2008 Server Standard
Apache 2.2.4
PHP 5.2.10
Oracle Client
Thanks in advance.

Hey,
I'm French so i'll try to explain in my best english.
I had the same problem. And i solved it.
In fact i change the dll because the one which php install give us is not compatible.
I choose the one which is provides with wampserver 2.0i.
php_oci8_11g.dll
with instantclient_11_1g
Next i'll create environnement variables
NLS_LANG=FRENCH_FRANCE.WE8ISO8859P15
TNS_ADMIN=d:\oracle
and in path variable add the way to the instantclient11_1
D:\oracle\instantclient_11_1
Then i restart the server and lucky all services start and run perfectly.

Java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error

Hi all,
I am able to INSERT and SELECT records from FoxPRo database successfully.
The driver is Sun JDBC-ODBC bridge
The DELETE statement throws no exception.
I've tried to execute PACK after the DELETE call and got following exception:
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]File must be opened exclusively.So I tried USE MYTABLE EXCLUSIVE in a Statement before calling PACK and got the exception:
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error or access violationI've also tried inserting the USE MYTABLE EXCLUSIVE before calling DELETE but got the same exception above.
The ODBC DSN for MYTABLE is setup as:
- Free Tables (not database)
- Null (checked)
- Deleted (checked)
- Fetch data in background (checked)
I am not able to issue any of the following commands to FoxPro using java
OPEN - To open a table
CLOSE - To close a table
USE - To open a table for uer either in exclusive mode or shared mode
The exception being generated is :
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error or access violationThe help file of the Microsoft Visual Foxpro Driver states that the driver has support for the above commands.I a not able to get the way to issue the above commands to the driver using java.
In setting up the ODBC DSN I saw no "read only" setting.
In the Visual Foxpro table, I saw no READ ONLY settings.And also, there are no delete permission grants and there is no user database sesssion concept.
I've tried all of the above with DSN mapped to a database(NOT free tables) and setting AUTO-COMMIT OFF and AUTO-COMMIT ON.But in vain. The same exceptions as those stated above persisted.
Environment:
Microsoft Windows XP Professional
JDK version "1.4.2_09"
Microsoft Visual Foxpro 06.00.8167
Microsoft Visual Foxpro Driver 6.01.8629.01
Don't know what else to try.
Can anybody please help me.
Thanks in advance
Archana

java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]File must be opened exclusively.
In the Visual Foxpro table, I saw no READ ONLY settings.And also, there are
no delete permission grants and there is no user database sesssion concept.
The ODBC DSN for MYTABLE is setup as:
- Free Tables (not database)
- Null (checked)
- Deleted (checked)If you're using Visual Foxpro database(.DBC), you should see "Exclusive" option too. You can try check it, but I don't know whether your issue will disappear.

Visual C++ 6.0 error with Measuremen​t Studio ActiveX controls

Similar Messages

Maybe you are looking for

Visual C++ 6.0 error with Measurement Studio ActiveX controls