Visualization of user are scrambled after logging again

I have a customer who visualization of columns of certain document are scrambled(columns out of order). They are fixed, but when he enters again, the visualization is out of order. Any ideas how to fix ?

You may check this thread first:
User Settings lost after session is released
Thanks,
Gordon

Similar Messages

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

RDS - New users immediately logsoff after log on

I am running Windows 2008 R2 server with Remote Desktop Services. New users are immediately logsoff after connecting to the server.
When I exclude the new created user from the GPO's the session will logon.
If the problem occures event id 1542 - Microsoft-Windows-User Profiles Service is created. Any ideas?
Log Name: Application
Source: Microsoft-Windows-User Profiles Service
Date: 30-5-2013 10:38:36
Event ID: 1542
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: terminalserver.domain.local
Description:
Windows cannot load classes registry file.
DETAIL - The system cannot find the file specified.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" />
<EventID>1542</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-05-30T08:38:36.619393600Z" />
<EventRecordID>100791</EventRecordID>
<Correlation />
<Execution ProcessID="1148" ThreadID="32220" />
<Channel>Application</Channel>
<Computer>terminalserver.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Error">The system cannot find the file specified.
</Data>
</EventData>
</Event>

Start Group Policy Management, run rsop on the computer and user with problems. Rightklick in the left pane, Save Report

Gateway failed error when users are trying to loginto the portal

Hi,
when the users are trying to log into the portal, the following error msg is displaying. most of the users are facing this problem
"Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=abcxyz144 GROUP=GP1 R3NAME=GP1 MSSERV=sapmsGP1 PCS=1 LOCATION"
is the problem from r/3 system or from portal? if it is from portal, what settings have to be done & if it is r/3 what have to be checked for the particular user to avoid such error message
reply soon as this is very urgent issue.
regards
vv

this is likely to be missing entries in your services file on the portal server.
I would expect to see
sapmsGP1 36xx
or similar. You might also want to make sure that you portal server can resolve the DNS name of your R/3 system. ping abcxyz144 from the portal node to make sure.
Haydn

Wireless Guest Users once authenticated, are able to connect again after disconnection

Wireless Guest Users once authenticated, are able to connect again after disconnection .Clients should not able to connect after the restart or by disabling and enabling the WIFI adapter. But as of now clients are connecting to network . How we can configure this feature in WLC ?

IIRC, if your reboot, disable the adapter or disconnect from the wireless, as long as the session timer or the idle timer does not timeout, then you are still considered as authenticated. If you logout, the wlc logs you off and you will have to log back in. The wierd thing is with iPhones or iPads, they go to sleep mode and you have to log back in to access the guest network. The workaround was to increase the idle timers to a certain acceptable limit to prevent this from happening.
If you disconnect from the guest SSID and leave your client off the network until the idle timer expires, do you get prompted for a login or do you have access again?
Sent from Cisco Technical Support iPhone App

After update to 11.3.1 users are not logged in to the ZAA

Hi,
we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine but there is one problem. A lot of users are not logged in to the ZAA. If i try to start a remote session with the username i get the message the user is not logged in to any device.
If i connect me to the device and look at the ZAA the user is not logged in and i can not log in because i get the error message that the username or password is wrong.
The solution is to go to the registry -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local and i have to delete the user.
After that the login works fine
Sometimes i have to delete the user in this registry key too -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
Is that a known bug? What can i do to solve that problem?

I would recommend an SR.
You should not have to do that.
There were some similar bugs in the past, but were fixed in 11.2.x and
should not exist in 11.3.x at all.
On 10/15/2014 7:26 AM, SteffenMuch wrote:
>
> Hi,
>
> we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine
> but there is one problem. A lot of users are not logged in to the ZAA.
> If i try to start a remote session with the username i get the message
> the user is not logged in to any device.
> If i connect me to the device and look at the ZAA the user is not logged
> in and i can not log in because i get the error message that the
> username or password is wrong.
>
> The solution is to go to the registry ->
> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local
> and i have to delete the user.
> After that the login works fine
> Sometimes i have to delete the user in this registry key too ->
> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
>
> Is that a known bug? What can i do to solve that problem?
>
>
Going to Brainshare 2014?
http://www.brainshare.com
Use Registration Code "nvlcwilson" for $300 off!
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

After upgraded 9.2 DB, all users are not able to login (Except Guest).

After completed the DB upgrade from 8.1.7.4 to 9.2.0, all users are not able to login the oraclemypage.home. This is except the Guest account.For example, I use the sysadmin account to login the oraclemypage.home. It shows "Your login is invalid. Please login again."
Moreover, I do the following query.
SQL> select fnd_web_sec.validate_login('SYSADMIN','SYSADMIN') from
dual;
FND_WEB_SEC.VALIDATE_LOGIN('SYSADMIN','SYSADMIN')
N
If I guery the Guest account, the result is "Y".
Also, all users can access via dev60cgi/f60cgi to open E-business 11.5.7 application. Are there any missing script / process I need to do?
Thanks,
Matthew

Hi Arun,
What message u get on the apache logs / jserv logs when u get the error ?
Since the log cumulate a giga byte, I clean up the log and test again. It seems no error message.Whats your platform?
HP-UX 11.11To which version (5 digit) u upgraded DB ?
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
I found a note 225074.1 that talks of a similar issue where users are ablt to login to forms but not php. this is for AIX. review the note.
I had checked this previously. Part of this document already tried which suggested by Oracle Support.what is the end_date for all of these users in fnd_user table ? if all users for some reason is end_dated , then fnd_web_sec will show 'N"
All users are normal. For those I tested without end_dated, I can access via f60cgi too.whats the session_cookie_domain set to in icx_parameters table? Set to NULL and try bouncing apache once.
This set to ".mycompany.com". You mean that I set the session_cookie_domain to NULL and restart Apache, right? Why I need to set it NULL?

Few users are unable to sign in after we added 2 more front end servers in existing pool?

Hello,
We have recently extended the Lync 2010 Enterprise pool with 2 Front end servers. Now we have totally 6 Front end servers.
After this change some users are unable to login. Error message: "Cannot loggin as server is temporarily unavailable"
Captured, client logs and received the following:
ms-diagnostics: 4004;reason="Credentials provided are not authorized to act as specified from URI";
We have the following security settings on the newly added front end servers:
Network security: Minimumsecurity for NTLM SSP Based clients - set to - Require 128-bit encryption
In other existing front end servers, it has been set to - No minimum.
Questions:
1. Is that the issue for signin failure?
2. Do we need to change this option to - No minimum in new servers and reboot it?
Please advise. MUCH THANKS.

Hello
Those clients running in Windows 7 OS. And the error is different:
"Cannot loggin as server is temporarily unavailable"
Thanks

You are unable to log in to the File Vault user account "myaccount "...

I know there are various posts already out there on remedies for recovering your data stored on a FileVault account when you receive the following message at the login screen; *"You are unable to log in to the File Vault user account "myaccount " at this time"*, but this genuinely worked for me despite AppleCare providing absolutely no assistance whatsoever. In fact, if I had followed their advise I'd be inconsolable right now having wiped my MacBook Pro and contemplating the prospect of rewriting my two essays due in 3 days time!
I, in a moment of shear stupidity, decided to move the sparsebundle file in my one and only account to trash. Thinking nothing of my foolish actions I shut down for the evening without a care in the world. The next day I started up my computer as usual, and as usual I was prompted at the login screen for my password. I entered the correct password, but was alarmed to see the message above flash before my eyes. Without boring you all with what I did over the weekend waiting for AppleCare to open again on Monday morning. Anyway, this post is specifically for people who have put the sparsebundle of their FileVault-enabled account in the trash (NOT anything else!) without emptying it, of course! The other prerequisite is that you must REMEMBER YOUR FILEVAULT ACCOUNT PASSWORD!
1. Firstly, you must insert *Disc 1 of the Mac OS X Install* discs.
2. Restart your computer holding down the letter S (make sure you are holding this down BEFORE the start up noise sounds)
3. Select the appropriate language and continue to the next screen (DO NOT go past the next screen, the WELCOME screen)
4. At the grey bar at the top, under Utilities, select *Reset Password*
5. Select the Administrator/Root account and proceed to change the password of this account to test
6. Confirm the password by reentering it and click Save
7. Restart your computer and at the login screen you should now be able to select an account named Other
8. The username for this account is root and the password is test (the password you entered earlier)
9. Using Finder, locate the Terminal utility, which can be found in *Applications --> Utilities*
10. Enter the following, ignoring the bold of course (pay attention to lower cases AND spaces!): *defaults write com.apple.finder AppleShowAllFiles TRUE*
11. Hit Enter
12. On the next line, enter: *killall Finder*
13. Hit Enter again
14. Type: exit on the next line and close Terminal
15. This has enabled the hidden files on your computer to be visible
16. You then need to locate the sparsebundle file in the trash of your usual account folder (it could be 501, so search for that too) whilst logged in to the administrator account
17. Once you have found it, click *Go to Folder* under Go in the grey bar and type /Users/
18. Create a *new folder* at this location with a new username
19. Move the sparsebundle from its present location to the folder you have just created
20. Click Get Info on the new folder, and at the very bottom click *Apply to enclosed items*
21. In *System Preferences --> Accounts*, create a new user with EXACTLY the same name as the folder you created (eg. Folder name = burtreynolds, new user = burtreynolds)
22. A window should appear if you have done the above correctly stating *A folder in Users folder already has same name, would you like to use it?*
22. Click OK
23. Click *Show All* at the top of the Accounts window
24. Restart your system and log in to the new account you have created
25. The sparsebundle should now be visible
26. Double-click on the sparsebundle, it will prompt you to enter a password
27. Enter the password of your former account (if you have genuinely forgotten this password, I honestly can't help any further at this point)
28. If the password is correct, the sparsebundle will automatically mount and you will have access to all the files
29. NEVER EVER USE FILEVAULT AGAIN AND BACK UP ALL DATA YOU DON'T WANT TO LOSE!!!
The above worked for me, and to say I'm mildly annoyed with AppleCare is, well, putting it mildly really!

I know there are various posts already out there on remedies for recovering your data stored on a FileVault account when you receive the following message at the login screen; *"You are unable to log in to the File Vault user account "myaccount " at this time"*, but this genuinely worked for me despite AppleCare providing absolutely no assistance whatsoever. In fact, if I had followed their advise I'd be inconsolable right now having wiped my MacBook Pro and contemplating the prospect of rewriting my two essays due in 3 days time!
I, in a moment of shear stupidity, decided to move the sparsebundle file in my one and only account to trash. Thinking nothing of my foolish actions I shut down for the evening without a care in the world. The next day I started up my computer as usual, and as usual I was prompted at the login screen for my password. I entered the correct password, but was alarmed to see the message above flash before my eyes. Without boring you all with what I did over the weekend waiting for AppleCare to open again on Monday morning. Anyway, this post is specifically for people who have put the sparsebundle of their FileVault-enabled account in the trash (NOT anything else!) without emptying it, of course! The other prerequisite is that you must REMEMBER YOUR FILEVAULT ACCOUNT PASSWORD!
1. Firstly, you must insert *Disc 1 of the Mac OS X Install* discs.
2. Restart your computer holding down the letter S (make sure you are holding this down BEFORE the start up noise sounds)
3. Select the appropriate language and continue to the next screen (DO NOT go past the next screen, the WELCOME screen)
4. At the grey bar at the top, under Utilities, select *Reset Password*
5. Select the Administrator/Root account and proceed to change the password of this account to test
6. Confirm the password by reentering it and click Save
7. Restart your computer and at the login screen you should now be able to select an account named Other
8. The username for this account is root and the password is test (the password you entered earlier)
9. Using Finder, locate the Terminal utility, which can be found in *Applications --> Utilities*
10. Enter the following, ignoring the bold of course (pay attention to lower cases AND spaces!): *defaults write com.apple.finder AppleShowAllFiles TRUE*
11. Hit Enter
12. On the next line, enter: *killall Finder*
13. Hit Enter again
14. Type: exit on the next line and close Terminal
15. This has enabled the hidden files on your computer to be visible
16. You then need to locate the sparsebundle file in the trash of your usual account folder (it could be 501, so search for that too) whilst logged in to the administrator account
17. Once you have found it, click *Go to Folder* under Go in the grey bar and type /Users/
18. Create a *new folder* at this location with a new username
19. Move the sparsebundle from its present location to the folder you have just created
20. Click Get Info on the new folder, and at the very bottom click *Apply to enclosed items*
21. In *System Preferences --> Accounts*, create a new user with EXACTLY the same name as the folder you created (eg. Folder name = burtreynolds, new user = burtreynolds)
22. A window should appear if you have done the above correctly stating *A folder in Users folder already has same name, would you like to use it?*
22. Click OK
23. Click *Show All* at the top of the Accounts window
24. Restart your system and log in to the new account you have created
25. The sparsebundle should now be visible
26. Double-click on the sparsebundle, it will prompt you to enter a password
27. Enter the password of your former account (if you have genuinely forgotten this password, I honestly can't help any further at this point)
28. If the password is correct, the sparsebundle will automatically mount and you will have access to all the files
29. NEVER EVER USE FILEVAULT AGAIN AND BACK UP ALL DATA YOU DON'T WANT TO LOSE!!!
The above worked for me, and to say I'm mildly annoyed with AppleCare is, well, putting it mildly really!

Why am I still getting this message after logging in - This computer is no longer authorized for apps that are installed on the iPhone "Myron Liptzin's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?

Click here and follow the instructions.
(71175)

User change password after first logging in Oracle 11g

Hi
Can you help someone in connection with this problem:
user can not change password after first logging in Oracle 11g
All the best
Ragip Avdijaj

Sounds like they are not getting logged in at all, so they are never getting to the point where they can change the password, but we need to see more detail to give a better answer (an example or copy-paste of a sqlplus session might help)

Users are not able to save pdfs after editing - Adobe XI. They do not use the Win7 explorer preview pane. If they completely close the Win7 explorer window, they can save - Adobe XI thinks the preview pane is open when it is not.

Users are not able to save pdfs after editing. Product is Adobe XI, OS is Win7 64-bit. When saving, an error pops up that the file cannot be saved, it is in use. If they save as a different name, it works. Found several forums/blogs/etc that suggest the problem can be solved by closing the Window7 explorer preview pane. They don't use the preview pane. I figured out that if they completely close the explorer window, they can save. But this means they have to open and close explorer for each file.

Hi, I would like to chime in and say that this problem has not yet been resolved. It is extremely annoying when all I do is highlight a document in the file explorer and I get 5 errors (evenly spaced out about 20 seconds apart telling me that "Microsoft
Word Cannot Start (24)". These errors persist even after windows explorer and word are closed. And I don't want to start terminating processes just to make them stop every time.
I'm a little frustrated with this problem and the other problems I've encountered with MS Office 2013 with file corruption, crashing, 2010 compatibility issues, and the whole host of errors when trying to actually do WORK with Word.
I do work with long, complex reports in Word because that's the best way available for myself (and my coworkers) to use. However, I sincerely regret upgrading to Office 2013 because of it. I love it, all of its features, and its interface, but I simply cannot
use it without problems.
Submitting an official complaint whenever the phone reps start up again in the morning.

Sorry, we are unable to log you in. Please try again later

Hi there,
I see a few posts are online over the last year relating to this issue, but as far as I can see there are none that have a definitive answer - that's a bit shocking.
So I need to install the server behavior extension to DW CC and to do this I either need a direct download link for the extension (which there doesn't seem to be) or download it using Adobe Exchange.
However, as soon as I try to commence download or go to My Stuff in the DW Adobe Exchange panel, I get the infamous "Sorry, we are unable to log you in. Please try again later". It still didn't work later.
This is a fully registered version of DW CC, only recently installed. AdobeExchange V1.1.0
Please help.
Thanks,
Mark

Hi Mark,
Thanks for getting in touch. You're correct that this issue has affected others in the past, however the root cause has always differed on a case-by-case basis - hence why there hasn't been one definitive resolution on this issue.
So that we can work out what is going wrong in your particular case, could you please email me (fgregor at adobe dot com) with the following log file?
On Windows:
C:\Users\<username>\AppData\Roaming\Adobe\Exchange\adobeexchange.log
On Mac:
/Users/<UserName>/Library/Preferences/Adobe/Exchange/adobeexchange.log
We'll do our best to get to the bottom of this as quickly as we can.
Best wishes,
Fraser

Windows network shares disappearing when users are logged on to Mac

We are having some problems with windows network shares disappearing when users are logged on to Mac computers.
We have a number of Mac labs that users can logon to using their AD login credentials. Their network shares are saved on a windows file server. The ad plug has been configured on each client Mac as has the LDAP plug-in. It is configured to connect to the Xserve which is running as an OD master. The system preferences for the client Macs are being managed from the Xserve.
The problem for the users is that they can log into the Mac no problem and they can see their network share appearing on the desktop and in the dock, but for some reason on random Macs and with random users the network share disappears. If they log off and log back in again the network share is still missing. As it happens randomly I can not put my finger on what the problem is.
Most labs either have Intel iMacs running 10.4.11 or Intel iMacs running 10.5.5
Any help will be appreciated
Noel Patterson
Southern Regional College
Northern Ireland

Mike,
We need to know some basic scoping information to provide any further input.
1)
Is the user prompted that the server will be shutting down?
2)
Does Task Scheduler show that the task ran at the scheduled time?
3)
Are there any errors in %windir%\tasks\schedlgu.txt?
4)
Does the problem still occur if the machine is in its own OU with blocked inheritance?
Does the problem still occur in a clean boot configuration with MSConfig
Steps to clean boot machine:
================
Start > Run > Msconfig > Select Services > click "check box", "Hide all microsoft services" > Disable all
Start > Run > Msconfig > Select startup> Disable all
Reboot
Thanks,
ankit

Newly created users are not able to log in through WEBGUI in SRM system

Hi All,
I have created new roles in the SRM system with the BP tanscation codes Like( BBPSC01
BBPSC02
BBPSC03
BBPSC04)
after that I have created new users and I have assigned these roles to users. Users are able to login throgh SAP GUI but Users are not able to log in WEB GUI.. Once they providing user id and password in web gui. they are facing issue.
For web login do we need to maintain any special settings in SRM system?
Please suggest me.
Thanks in advance.
Regards,
Siva

Hi,
Here is the error when user is giving user id and pwd.
Note
The following error text was processed in the system DN0 : Error message occurred.
The error occurred on the application server dm2serv_DN0_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPMSYST
Regards,
Siva

Visualization of user are scrambled after logging again

Similar Messages

Maybe you are looking for