Vixia HF50 - "Monitor while Out" connection not established
I have the HF50, win 7 home edition laptop and linksys wrt54gs2 v1 and trying to connect with an iphone using the "monitor while out" function.
- streaming from camera to iphone works fine, while in recording mode
- when in play mode connecting to access point works, and I can find the camera in the networks of my laptop
- When in streaming mode and trying to connect with "monitor while out", I get an error message that I have to change the port settings.
- the port is set to 80, and I entered a password (into the camera)
- I ran the checking tool that is supposed to check the system capability to use the "monitor while out" function.
- 1st check says system is not properly configured, router does not support "UPnP. I checked, the router is in fact capable of UPnP and this function is enabled
- Ran the tool again and not its saying router does not allow port mapping. I think it does, because I have some ports open for the xbox. Otherwise, I don't have much of a clue....
- I opened port 80 entering the IP of my computer and the checking tool says nothing found that would prevent me from using .....
- I opened port 80 to the IP address of the camera, however the camera won't connect allays the same error.
- I played with the settings in the router, but no success.
- running the checking tool seems to give random results between router does not provide UPnP, no port mapping and no issue found.
I suspect the issue is in the router, but I don't have any idea what to try out next.
Any help is appreciated.
Yes, our psearch connections are indeed closed when an entry change triggers the DS server to write to those connections.
Now we just have to make sure there will be entry change to trigger connection clean up before our DS reaches nsslapd-maxpsearch.
Thank you.
Similar Messages
-
Hi,
I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA to SQL2012.DatabaseB.TableB to without
any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
Please help!
Thanks
EdwardHi Athur,
Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
USE msdb
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = ',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
So I have a question: Do I have to create a new user account that can access our network named
PS: Below are the steps I followed the article:
--Script #1 - Creating a credential to be used by proxy
USE MASTER
GO
--Drop the credential if it is already existing
IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials')
BEGIN
DROP CREDENTIAL [SSISProxyCredentials]
END
GO
CREATE CREDENTIAL [SSISProxyCredentials]
WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser',
SECRET = N'abcd@0987'
GO
--Script #2 - Creating a proxy account
USE msdb
GO
--Drop the proxy if it is already existing
IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo')
BEGIN
EXEC dbo.sp_delete_proxy
@proxy_name = N'SSISProxyDemo'
END
GO
and the rest of the script 2 hasn't been proceeded due to error:
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = N'SSISProxyDemo',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
--To enable or disable you can use this command
EXEC msdb.dbo.sp_update_proxy
@proxy_name = N'SSISProxyDemo',
@enabled = 1 --@enabled
= 0
GO
Please advise me!
Thanks,Edward -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
SAP Support connection not established.
Dear all
When I try to connect to sap for R3 connection. It shows green icon to say the connection is ok.
and connection status will be displayed like this.
Even it shows it is connected. RFC not established and not allow to sap service support.
once I click on connect following message will be displayed.
pls provide your sudgessions.
Thanks
priyanDear All..
The issue is resolved. Thats because of the SAP router licence renewal issue. [expired].
It could be checked by sapgenpse get_my_name -v -n validity on sap router.
Thanks All -
Hello!
I'm having troubles syncing now that I have iOS7.0.4 on my iPhone 5 - I keep getting an error message stating "iTunes could not sync information to the iphone because a connection could not be established to the iphone". It's also taken home video's and some songs off the iphone which previously played & Im technically challenged at best so any help would be greatly appreciated before I throw the phone out in frustration!Hi DannyGo and welcome to the forums!
What is the firmware version of your router? You can check it by logging in the rotuer's set up page. Please check if it's the same as the version found in the downloads tab of this link.
http://homesupport.cisco.com/en-us/wireless/lbc/BEFW11S4
If not, please upgrade and reconfigure the settings. Please refer to the links below.
Checking the Linksys Router’s Firmware
Upgrading the Linksys Router's Firmware
Setting-Up a Router with Cable Internet Service - if you are on cable
Setting-Up a Router with DSL Internet Service - for DSL connections
Setting-Up the Wireless Settings on a Router
Let me know how it goes. -
Cisco SMA to WSA connection not establishing
Hai, i was trying to add my cisco ironport WSA to SMA (both are in same subnet). I enabled monitoring service like
Centralized reporting and Centralized Configuration Manager in SMA. After i added the WSA ip and hostname in SMA and try to establish connection, but after several minutes it is showing timeout error.
Can you please let me know what should be the reason??? Do i need to enable anything on cisco WSA ??
Regards,
Mohamed FayzHi, actually I have the same problem, when trying to establish a connection from SMA to my WSAV (virtual web security appliance). I cannot add anymore my WSAV to my SMA. We have checked the network and connectivity is working for sure. I have also tried connecting from SMA command line to the WSAV and this is working (for ping and also a telnet to the SSH port 22 to ensure that SSH server on my WSAV is responding to my SMA and I get the prompt showing also the SSH FreeBSD version).
Here the output for telnet from SMA to WSAV port 22, which looks good:
cisco.example.com> telnet 172.44.21.5 22
Trying 172.44.21.5...
Connected to 172.44.21.5.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.4p1 FreeBSD-20100308
^]
telnet> q
Connection closed.
The connection from SMA to WSAV was working before, but just for testing purposes, I disabled WSAV from the SMA (I wanted to take some screenshots for our team on how to bind WSAV to the SMA and now I cannot establish again the connection --> same error: time out error after a few minutes). I've already reset SMA completely and reinstalled and also rebooted the both devices several times but ending again with the same timeout error ... WSAV is 8.0.5 and SMA is 8.3.6-014 (which is good due to the compatiblity matrix).
I will go on and do some testing, as I need this working again until monday...
In the meantime if you have suggestions, feel free to give me some hints :)
I'll come back to you if I would find a solution or some kind of explanation.
Greetings
Ciro -
Error while checking connection after establishing sap router
Hello All,
I have installed a sap router on our solution manager on Linux environment
when i try to check the RFC connection from SM59 i am receiving the following error.
my message server is configured as follows
Msg. Server - /H/<SAP Router Ip>/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
<SAP Router> is my solman ip address
Connection Test SAPOSS
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout while pending for route completion
Error Details LOCATION: SAP-Server sgtr-s-devs1d_S1D_67 on host sgtr-s-devs1d (wp 0)
Error Details DETAIL: NiErrSet
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 175
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: -12
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Feb 22 23:33:20 2012
Error Details VERSION: 38
my oss1 tecnical settings are as follows.
sap router at customer side
Name sgtr-s-devs1d
IP Address 65.38.107.196
Instance no. 99
sap router at sap
Name sapserv2
IP Address 194.39.131.34
Instance no. 99
when i do a logon i get the following error
Unable to connect to SAPNet message server
(Default connection will be used...)
To check whether saprouter is working or not i have executed few commands
u2022 ps -ef|grep saprouter
s1dadm 9873 9590 0 05:53 pts/2 00:00:00 saprouter -r -S 3299 -V 3 -K p:CN=sgtr-s-devs1d, OU=0000858034, OU=SAProuter, O=SAP, C=DE
s1dadm 9951 9590 0 06:09 pts/2 00:00:00 grep saprouter
u2022 lsof -w -n -i tcp:3299
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
saprouter 9873 s1dadm 4u IPv4 5333574 0t0 TCP *:pdrncs (LISTEN)
u2022 fuser -n tcp 3299
3299/tcp: 9873
u2022 netstat -anp|grep :3299
tcp 0 0 0.0.0.0:3299 0.0.0.0:* LISTEN 9873/saprouter
In /usr/sap/saprouter
my saprouttab contains
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local system for R/3-Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 65.38.107.196 3267
Access from your local Network to SAP
P 65.38.107.196 194.39.131.34 3299
All other connections will be denied
#D * * *
one thing i want to know is my saprouter started or did i miss any configuration how to check whether my sap router is started.
Please advice me if i miss any,
Thanks in advance,
Vardhan.Thanks for the quick reply.
sgtr-s-devs1d:s1dadm > saprouter -r
trcfile dev_rout
LOCATION SAProuter 38.10 on 'sgtr-s-devs1d'
ERROR service '0.0.0.0:3299' in use
TIME Thu Feb 23 07:23:36 2012
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -4
MODULE nixxi.cpp
LINE 3227
DETAIL NiIBindSocket
SYSTEM CALL bind
ERRNO 98
ERRNO TEXT Address already in use
COUNTER 2
looke like my sap router is on SAProuter 38.10
already i have started router earlier
Thanks!
Vardhan -
Target connection not established
Hi,
After deployment the target table and package script is getting created in repository rather than target.
Plzs help..
ThanksYou target module has a location associated with it. When you deployed you were prompted to 'register' this location by providing the username, password, host, port and DB service name. This is where target tables and mappings will be created. I suspect you might have provided the wrong credentials when you registered your location. Test this by creating another location, associating the target module with this new location (Properties -> Location) and deploying again, this time entering the correct info when prompted to register the new location.
Nikolai -
MacBook Air 2008 detects external monitor while not connected to one
When I put my MBA to sleep and wake it up, it detects and displays an external monitor. I checked the Display section in About this Mac, it shows that I'm connect to an external monitor when I'm not, and that I'm operating on Desktop 2. This is quite an issue due to a noticeable drop in performance and battery life. Has this happened to any one else? If so how did you fix it?
You wanted Extended Desktop, instructions on how to configure that are outlined in this article -
http://support.apple.com/kb/HT5019 -
The Network Adaptor could not establish the connection while deploying
Hi All,
I am using oracle db 9.2.0.7 and OWB 9.2.0.4. When I am trying to deploy the object on remote database using owb deployment manager, it is failing to deploy object and giving an error "The Network Adaptor Could Not establish connection."
When I am trying to connect using SQL+, it is connecting as well as I can create the objects and all but the same thing I am trying to do using OWB, it is giving me an error.
What I understand is if there is something wrong with the tnsnames or listner, then it should give an error with sql+ as well. I have also check the c:\windows\system32\driver\etc\hosts which includes the ipaddress and host name.
Please help.
Thanks
-MehulHi,
are You using 2 different Oracle Homes (one for OWB and one with main Oracle software)
If so, may be that the TNSNAMES.ORA in the OWB Oracle Home is not correctly configured.
Please check or clarify that
Hope this helps
Max -
The Network Adapter could not establish the connection - while connecting
Hi All,
I have installed OEM 11g Grid Control on Linux 5.3 on Host1.
I have also installed Oracle Management Agent on Host2.
I can see that Agent on Host2 is sending stats to Host1 which I can view using Grid Control. However when I try to access Availability/Schema details for the Database instance on Host2, I get the error message "The Network Adapter could not establish the connection".
I have setup the tns entry in Host database server tnsnames.ora file, I can connect to the database on Host2 from sql*plus in Host1. But from Grid control it is now working.
Do you know if I need to setup any other configuration?
Please Note: I can see all information of repository database instance from Grid control. The OMS and Repository databsse runs on the same box.Verify that the Agent's URL, as seen in the Grid Console -> Setup -> Agent name page is the same as the value configured for the EMD_URL in the <AGENT_HOME>/sysman/config/emd.properties file.
Check http://www.myoraclesupports.com/content/how-troubleshoot-communication-between-oracle-management-service-oms-and-grid-agent-componen for other options (though written for 10g most is also valid for GC 11g)
Eric -
One day when using my duel display the second monitor decided it wouldn't display at full resolution in the middle of doing something i was confused. I use a mini display to hdmi then hdmi to the second monitor. I thought maybe the converter or cable died. I bought another another mini display to hdmi and tried another hdmi cord and the same issue. My roommate has macbook pro as well so i decided to see if it was the monitor, when i pluged the mini display converter into his and used the external monitor it displayed perfectly not below resolution. Doing this I knew it was not the monitor or the mini display to hdmi or the hdmi cable. I took it into the genuis bar assuming now that it was my grapics card or logic board. When the genuis went to duel screen it on a cinema display it displayed perfectly. So went home tried to duel screen it again and still not displaying at full resolution. That is where I am stuck, in summary:
My screen used to display perfect resolution on a second monitor and suddenly did not.
Tested two mini display to hdmi and hdmi cords both were fine.
Tested to see if monitor was issue but displayed perfectly when i used roommates laptop.
Went to genius bar and displayed perfectly on second monitor so it can display perfect resolution on apples monitors but will not do so anymore on my monitor, even though roommates macbook pro will display perfect resolution on my monitor.
I am beyond confused.Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.
-
Jdbc. The Network Adapter could not establish the connection. Help Please!!
I've found several responses over this issue, but none works for me.
I'm trying to setup a simple jdbc connection from a simple program.
Platform:
Fedora Core 4 (FC4) on AMD 64 bits
Java 1.4.2_04 (64 bits)
ORacle 10g or Oracle 9.2.0.4 (none works);
Tips:
- I can't connect to a remote server, nor to a local server
- I can connect using SQLplus
- TNSPing works fine
- Listener it's up
- my connection string is jdbc:oracle:thin:user/name@host:port:sid
- Also try jdbc:oracle:thin:user/name@//host:port/sid
- I'v tryied with classes12.jar, odbj14.jar
- my hostname it's ok.
I've monitored ip traffic on remote computer. While using TNSPING I detect activity. While using jdbc, no.
Please, any idea??Thanks for your reply.
To your questions:
- I´v tried both IP, host, and even host.domain
- I can connect from remote workstation using toad, and from local using sqlplus.
- I can´t connect via jdbc.
Folowing:
A) my sample code
B) the stack trace
C) the listener status (from my 9i server. Also tryied another servr with 10g)
when I call this program, I´ve tried severl connection strings:
jdbc:oracle:thin:user/pass@sdd51:1521:ebf
jdbc:oracle:thin:user/pass@:sdd51.sdd.com.ar:1521:ebf
jdbc:oracle:thin:user/pass@:10.10.10.51:1521:ebf
also try the other sintax:
jdbc:oracle:thin:user/pass@//sdd51:1521/ebf
In the classpath, I´tryied:
clasess12.jar
ojdbc14.jar
nls_charset12.jar
thanks
A)=================================================
// Import the JDBC classes
import java.sql.*;
import oracle.jdbc.pool.OracleDataSource;
import java.io.*;
import java.util.*;
public class test
// The query we will execute
static final String query = "select 'Hello JDBC: ' || sysdate from dual";
// The connection to the database
static Connection conn;
// Create the User Interface
static public void main (String args[])
try {
String connect_string = args[0];
// See if we need to open the connection to the database
if (conn == null)
// Create a OracleDataSource instance and set URL
OracleDataSource ods = new OracleDataSource();
ods.setURL(connect_string);
// Connect to the databse
System.out.println ("Connecting to " + connect_string + "\n");
conn = ods.getConnection ();
System.out.println ("Connected\n");
// Create a statement
Statement stmt = conn.createStatement ();
// Execute the query
System.out.println ("Executing query " + query + "\n");
ResultSet rset = stmt.executeQuery (query);
// Dump the result
while (rset.next ())
System.out.println (rset.getString (1) + "\n");
// We're done
System.out.println ("done.\n");
catch (Exception e)
e.printStackTrace();
// Oops
System.out.println (e.getMessage () + "\n");
B)=================================================
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:156)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:212)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:251)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:224)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:102)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:85)
at test.main(test.java:66)
C)=================================================
LSNRCTL for Linux: Version 9.2.0.1.0 - Production on 30-JAN-2006 17:39:59
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 9.2.0.1.0 - Production
Start Date 24-JAN-2006 11:16:18
Uptime 6 days 6 hr. 23 min. 40 sec
Trace Level off
Security OFF
SNMP OFF
Listener Log File /opt/oracle/product/9.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sdd51.sdd.com.ar)(PORT=1521)))
Services Summary...
Service "ebf" has 1 instance(s).
Instance "ebf", status READY, has 1 handler(s) for this service...
The command completed successfully -
Connection Pooling : Network Adapter could not establish the connection
Hi,
We have a client-server application wherein the server has a pooled connection to an Oracle 10i database. The application is developed in Java and we are using Oracle OracleConnectionCacheImpl API to manage the connection pooling( DYNAMIC pooling with a pool size of 5 and we are using ojdbc14.jar)
On certain occasions when activity is extremely high, the server attemtps to retrieve around 2 million datasets/records. The connection pool runs out of connections and we get the following error :
com.indigo.utils.DBEngineException: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at com.indigo.zclasses.DBTradingSource.getConnection(DBTradingSource.java:136)
at com.indigo.zclasses.DBTradingSource.getTicketMessages(DBTradingSource.java:8033)
at sun.reflect.GeneratedMethodAccessor749.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.indigo.basketserver.ServerSideUtil.ConfigUtil(ServerSideUtil.java:88)
at com.indigo.basketserver.RemoteServerImpl.ConfigUtil(RemoteServerImpl.java:543)
at sun.reflect.GeneratedMethodAccessor17.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:418)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:521)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:325)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:171)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:149)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:95)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:63)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:547)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:404)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:298)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:268)
at com.indigo.zclasses.DBTradingSource.getConnection(DBTradingSource.java:127)
This is happens in Production and despite our exhaustive efforts,we have been unable to reproduce it in our Testing environment so far.
A large number of login attempts are seen in the Oracle login monitoring table, around 50,000 but we dont think that should be an issue. At the time, when this problem occurs, there are other processes making connection to the DB without any issues. Also, after sometime, the connection is restored and no exceptions are thrown.
Any insight into how we could simulate,resolve or monitor this issue would be greatly appreciated.
Thanks,
ZuberHi. This a long-known issue, and is caused by the DBMS listener's incoming
request buffer becoming overloaded by many simultaneous connection
requests. It will fail some of them. I have seen this with a simple java
program that calls Driver.connect() identically 20 times in a tight loop.
Some of the calls will fail in this way, while others will succeed. The
solution BEA's pool has, is to have a delay option to have the thread
sleep a bit (half-second to a secod or so) between successive connection
requests. After that, don't close connections until they're broken. Keep
them and re-use them.
HTH,
Joe Weinstein at BEA Systems -
Clean Access Server could not establish a secure connection
I have a OOB Real IP GW setup on v4.1.2
I seem to have a problem with the CAS connecting to the CAM although I have added the CAS to the CAM and can manage the CAS from the CAM.
I noticed while troubleshooting client authentication that the client was not being redirected to the logon web page and it had full access to the trusted network from the untrusted authentication vlan. I eventually figured out that if I change the CAS Filter Fallback method from Allow to ignore then it tries to authenticate the client. However the fact that the fallback is activated tells you that something is not right.
I have 2 problems:
A) The clients web page is redirected for authentication but it only lists the domain name in the URL and not the hostname or host IP. In the lab I do not have a DNS server and it would not help as it does not include the hostname in the URL anyway. How do I fix this or perhaps it's related to the 2nd problem.
B) When I manually change the URL by replacing the domain name with the IP of the CAS (untrusted OOB Real IP GW) then I get the following error message when logging on:
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at mydomain.com.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
I would guess the culprit is No 2 but surely the system can run on self signed certificates? I have an NTP server so time is in sync. I have even tried regenerating the cetificates on the CAM
& CAS.
Any ideas?To overcome problem B, I regenerated the SSL Certificates using the host IP address instead of the name for all the CAM & CAS appliances. This seems to have resolved this problem.
I also SSH'd from each of the CAS's to each of the CAM's from the CLI and it then prompts to permanently store the certificates. I'm not sure it this was necessary though.
Maybe you are looking for
-
How to get Distiller to display as a printer in my programs
Hi there, I recently re-installed and re-activated Creative Suite 3 on my Windows 8 computer, but Distiller does not display as a printer option in any of my programs. I already uninstalled and re-installed the bunch. Still no use. How do I fix this?
-
Cannot make a stroke on CS2 for mac
Hello, i'm making a document made up of several images imported from photoshop (copy/paste). When i try to make a stroke in each object nothing happens. I can select the color thickness but the object looks the same...the align strike feature is the
-
How to Parse an HTML File?
Hi all I want to parse an HTML file? How is it possible? After taking an input which is an HTML file, i need to parse it, and i need to print/modify values based on some tags? Please help me, how to parse an HTML file?
-
Display of keywords for multiple images error in LR5
In LR5, when two images are selected in Library view, the results in the Keyword Tags panel are incomplete. In my instance, two images were selected. They have some common keywords and those are properly displayed. However, the keywords assigned to o
-
Setting plan version as default
Dear Expert, How to setting 'plan version', for example: plan version 1 as default in tcode : s_alr_87013613 (Plan/Actual comparison)? What is the effect to others reports then? Thanks in advance.