Setting plan version as default

Dear Expert,
How to setting 'plan version', for example: plan version 1 as default in tcode :
s_alr_87013613 (Plan/Actual comparison)?
What is the effect to others reports then?
Thanks in advance.

The variable that is used in this report is 1VERP. You can changed this via GS12 to enter the whatever plan version to default under the default value. For your information, the report group 1AIP is run when you run the t-code S_ALRr_87013613, which inturn runs the report 1AIP-001 that incorporate the variable 1VERP under the plan data for version selection.
But this may not be the best practise, because you will be changing the SAP standard, which will be overwritten when you upload support packages or do an upgrade. Better you copy this report and use your own version variable, by copying the 1VERP.

Similar Messages

  • Setting "Monitor RGB" as default.

    Like many others I know, I design ONLY for the screen and thus, I ALWAYS want my screen to soft proof to "Monitor RGB" in both Illustrator and Photoshop (CS3). I've developed the habit of selecting View > Proof Setup > Monitor RGB and making sure that View > Proof Colors is checked EVERY SINGLE time I create or open a document. Is there a way I can set this as my default?
    (17" "unibody" MacBook Pro, CS3)

    The variable that is used in this report is 1VERP. You can changed this via GS12 to enter the whatever plan version to default under the default value. For your information, the report group 1AIP is run when you run the t-code S_ALRr_87013613, which inturn runs the report 1AIP-001 that incorporate the variable 1VERP under the plan data for version selection.
    But this may not be the best practise, because you will be changing the SAP standard, which will be overwritten when you upload support packages or do an upgrade. Better you copy this report and use your own version variable, by copying the 1VERP.

  • Setting 'replace existing' as default.

    I've connected an external hard drive to my Mac, due to a lack of internal hard drive space. I have moved my iTunes library to the external, but now I want to replace my existing files with Apple Lossless ones before I put all my CDs in the loft.
    When inserting a CD I get a pop-up asking me if I want to replace existing etc., so what I want to know is if there is a way of getting rid of this message and importing/replacing without getting this prompt?
    Cheers.

    The variable that is used in this report is 1VERP. You can changed this via GS12 to enter the whatever plan version to default under the default value. For your information, the report group 1AIP is run when you run the t-code S_ALRr_87013613, which inturn runs the report 1AIP-001 that incorporate the variable 1VERP under the plan data for version selection.
    But this may not be the best practise, because you will be changing the SAP standard, which will be overwritten when you upload support packages or do an upgrade. Better you copy this report and use your own version variable, by copying the 1VERP.

  • Plan Version defaults to ". :"

    Hi All
    Plan Version is set to 01 in Table T77S0. when I create a new org unit or position via ppome or pp01, it shows up the plan version as 01 Active
    but when i check the table HRP1000 the same org unit or position shows plan version as .:.
    I also did the report RHOBJCH in tc SE38. there is still no difference. Do I have to create all Org units once again after this report is run and reconciled?
    Can you please help me find why this is so..
    Edited by: SAP HR Infant on May 12, 2008 5:17 PM

    My question has been answered at work,  Thanks

  • Plan version Current plan was set

    Hi Experts,
    I am working on the SAP HCM implementation in the Health Sector and this is the first time i am working in Health Sector Project, and one of the IS-Healthcare Consultant has raised the following issue saying it as HR, and i am unable to figure out if its my error or not,I checked all the settings from my end and everything seems to be fine from my end... Please Advise....
    In IS-H there is a t-code called NB20 to create an organization structure in IS-H , but when he is trying to execute the t code thru easy access, it is giving a message saying " PLAN VERSION CURRENT PLAN WAS SET" ...
    IMG - Personnel Management - Global Settings in Personnel Management - Plan Version Maintenance - Maintain Plan Versions/ Set Active Plan Version
    Please Advise...

    Dear bharadwaj kocherlakota:
       Please maintain parameter POP = 01 in SU3 for that guy from IS-H, exit/enter SAP again; that should stop the message
    Let us know if that work!
    Best regards,
    Federico.

  • User Exit in APO to change Planning version defaults

    Hi,
    Is there any user exit/BADI I can use to User Exit in APO to change Planning version defaults.
    Regards,
    Tarun

    Hi Emmanuel,
    I am searching for this exit in APO-DP.I have a requirement where we CIF master data (location) from SAP R/3 to SAP APO.However the location are saved in default planning version/model ( ie 000) I need to save these locations in another planning version and I am looking for an appopriate user exit/BADI which can accomplish this.
    Regards,
    Tarun

  • Defaulting CO plan versions specific to cost plan method.

    Hi Experts
    I wish to have dedicated CO plan versions as shown below:
    Z01: Overal planning
    Z02: Detailed planning
    Z03: Unit cost planning
    Z04: ECP
    For ECP,  the CO plan version can be defauled. Similarly is there any provision to default the specific CO plan versions for the remaining cost plan methods?
    This helps in preventing the selection of inappropriate version. And also provides clarity that the version it self indicates the cost plan method.
    Request experts to comment.
    warm regards
    ramSiva

    Dear Prasad
    Thanks for prompt response, Is there any impact if we create new version ? Is there any SAP suggested documentation
    Kindly revert
    Regards
    Anilkumar

  • Set active plan versions

    Hi,
    How to enable new entries(Menu path) in set active plan versions in IMG actvity.
    thanks and regards,
    naidu.

    hey Thanks for the Same ,
    yes thats the standard,as i am working on a test client inthe menu path
    PM-global settings-plan version maintainance-set active plan version i dont find the standard instead all the fields are hidden ,if i have to make these fields active.
    Naidu.

  • HOw to set our Existing Active plan version to The new Created Client.

    Hello experts,
    I  have create two new Clients for idoc processing .
    But when i am creating partner profile for my Model View  the system  gives an "error that no active plan version exist."
    is there any way to solve this problem ????
    Regards,
    Dakshaini.
    Moderator message: only one thread per issue, please.
    Edited by: Thomas Zloch on Oct 14, 2011 3:43 PM

    Please try uncommenting the following line in your method call.
    * IS_PRINT = GS_PRINT
    Regards,
    Rich Heilman

  • Actuals in Plan Version 0

    Can someone explain to me what SAP means by 'actuals' in plan version 0?  Is this supposed to mean that the actual postings to a cost center (for example) are copied into this version?  This would mean that after a month is closed, the actuals would equal plan?
    Thanks in advance

    Plan and actual transactions are stored in a single table. For planning, version is one of the essential characteristics, against which the plan values are stored. Though this version does not mean much to actuals, SAP has made it to default to version '0', you can choose any other version also to record actuals against that version. But only one version can be chosen to record the actuals.
    Once you have set in the customizing which version shall be activated for the actuals, you never visit that again. It matters only when a report is being developed where you have to call the plan version and enter 0 against that for pulling actuals.
    Actual do not become plan because a version is being asked by the system.

  • "no active plan version exists" while adding system in partner profile

    Hi,
    i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
    Can anyone answer me how to do the set active plan version. I asked my functional team and  they didnt know how to set it.
    Thanks,
    Gowthaman.

    Thanks Sonia,
    in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
    Now i am getting different error while creating partner profile in we20..
    *Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
        *Message no. E0624*
    *Diagnosis*
        *Object CENTRALADMIN of type US is not known in the system.*
    *Procedure*
        *Enter a valid object and check the type.*
        *Make sure upper case and lower case are used correctly.*

  • After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

    Hi everyone, I have Snow Leopard 10.6.8. I have been very very frustrated by this problem. [I could not create new windows, and anything that opens new windows, such as trying to see what Add-ons you have etc would not work]. I read about changing screen alignment to the top... I have one screen so the option does not exist. The above messages would not fix this problem. I searched hard and did find a solution in the end. I read stuff about removing Add-ons until the problem is fixed, but its simply not the case.
    First of all open Firefox. next go to options: Help --- 'Restart with Add-ons disabled'. Tick the box for add-ons, restart firefox. Next go to Tools --- Add-ons. Next (In the Add-ons Manager' click on 'Plugins' on the left hand side pane. Look for the small blue writing that says 'Check to see if your plugins are up to date'.
    Now notice it should say 'Missing Flash'. "For your safety, Firefox has disabled your outdated version of Flash. Please upgrade to the latest version". I followed this, reinstalled Flash and it now works as it always did, no problems. For people where the above fix didn't work, try this one out. Hope it helps people!
    :o)

  • Can't set Safari as true default browser in windows xp

    I'm running WindowsXP, and I installed the latest version of Safari. No matter what I do, it won't become the true default browser. I tried using the Safari preferences approach which only has one effect - it changes the icon at the top of the start button task bar to Safari. However, all my links from the desktop, from start...run <type url>, and from MS Outlook all lauch IE. I've also tried changing all the settings in the start...set program access and defaults and nothing will make Safari my default browser.

    I don't have access to "Set Programs and Defaults" on my machine. Safari's ability to set itself as web browser, at least on Windows XP, seems to be broken. But I found a workaround. Install Firefox, let it set itself as default browser. Your hyperlinks and such should open in Firefox. Uninstall Firefox. Open up Safari, go to preferences and make sure Safari is set as default browser. Then, at least for me, the hyperlinks started opening in Safari. If you go into Safari and set Internet Explorer as default, you'll probably hose the setup and have to do it again.

  • Planning version

    there are one new cost center has been added into a existing cost center group and when we are trying to pull one report s_alr_87013620 and putting a planning version 0 and planning version BI , output of report in 0 version is showing all the cost center where as version BI is not showing the new cost center in the report.I have checked it in kSB1 report for new cost center there is no any line item present. 1)what can be the reason that two version is not showing the new cost center and
    2) what is the logic,   3)how it can displayed.
    Edited by: SDeepakKr on Jul 29, 2010 2:09 AM

    Hi,
    you could check, whether the indicator 'print zero rows' is deactivated in the report layout.
    Execute the report, go to Menu: Settings/Report Layout/Rows
    You can only use this indicator for those rows where the zero values result from the read data.  If you want to print all report rows, irrespective of whether posted data exists, you should set the Form printout indicator.
    If you use a section layout, then check the settings for 'print zero rows' in that too.
    Regards,
    Greta

  • SAP - Cost Center Planning - Version 1

    Dear All
    Recently we have started to use the cost center planning through KP16 under plan version -1
    However we are unable to down the plan data in excel with a cost center break up through KSBP report.
    We are not using any special ledger
    System is showing the following error
    No plan cost line items recorded.
    Message no. KB419
    Diagnosis
    No planned costs line items are written to controlling area DXES in version 1 of fiscal year 2009.
    System Response
    The report cannot be executed.
    Procedure
    Check your selection criteria or activate the line item update function.
    Note
    The line item update function is controlled depending on the application:
    Cost center planning
    Here you can define the update for each version and fiscal year. You can maintain the corresponding indicator (integrated planning) in the version maintenance (settings for the fiscal year).
    This indicator you can either
    set manually when creating a version or
    set later via the menu sequence "Planning -> Planning aids -> Integration active".
    Regards
    Anilkumar

    Hi,
    The impact is that the planning is stored also as line items and the planning is integrated between the CO-PCA components. In SAP words:
    - All available plan records for controlling area/version/fiscal year are posted as line items. The R/3 System posts these line items to the AC interface.
    - Any existing line items in the plan allocation transactions (plan assesment, distribution, or accrual calculation) are posted to the AC interface as well and made available to other components.
    Regards,
    Eli

Maybe you are looking for