VL10D - Data selection User Role
Hi,
i've used the Tcode VL10D and the "User role" tab is greyed.
How can i select the Data selection (ex. flag "with delivery")?
How can i mantain VL10CUA and VL10CUV?
Thank you.
Antonio
Hello Antonio,
Can you check in transaction VL10CU, on the second record "Purchase Orders", the field "Allow Assignment" must be checked in order to have the Role and Scenario editable.
Regarding the Scenario field, please see below which you may find useful:
You can edit a user-specific delivery scenario with a user-specific
list profile by choosing Outbound Delivery -> Create -> Collective
Processing of Documents due for Delivery -> User-Specific Delivery
Scenario. You can define user-specific values in user parameters
LE_VL10_SZENARIO and LE_VL10_LISTPROFIL. If no default scenario has
been specified, the sales order scenario appears. If a default
scenario has been specified, but no default list profile was
specified, the system uses the list profile that is assigned to the
default scenario. If there is no such assignment, the system uses
the "Deliver Sales Orders" (0001) list profile.
Transactions VL10A, VL10B, VL10C, VL10D, VL10E, VL10F, VL10G,
VL10H and VL10I refer directly to the delivery scenarios that are
predefined by the system. You can also access these transactions via
the shipping menu. Assignment of a list profile for these scenarios
is identical for all users and can be set in Customizing. The list
profile contains detailed information about processing the delivery
list.
Maintain the user parameters LE_VL10_UPG_NOMSG, LE_VL10_SZENARIO and
LE_VL10_LISTPROFIL with the options described above (System -> User
profile -> Own data; Parameters).
Kind regards
Martin
Similar Messages
-
Hi all ,
I received a complaint that user cannot select date selection on documents.
Let me explain in detail :
user will go to Sales A/R modules >> A/R Invoice .
When you click on posting date ,on the corner of the field , calendar selection (like a square box)is missing .(It should be there by default) and It happens to all date selection .User can do right on the field and select date selection and calendar pops up and It happens to all modules
It happened to only one client PC. Isn't that weird .I am sure it is affected by PC environment .
Can you share some advice .(reinstalling client is my last resort )
Thank you
BishalThank you Gordon .
The reason I was reffering to (client reinstall)because this computer was affected by virus and we remove the virus from the computer and I am pretty much sure that client doesn't know how to disbale picker off .
But well ,I could be wrong . Once I get a chance to look, I will determine whether it is simple or complicated issue .
Thank you once again for your support
Bishal -
Hello VMM Geeks,
I am using SCVMM 2012 R2 with Update Rollup 4. I have configured User Roles for each service groups (like Exchange-Admins, SCCM-Admins, SCOM-Admins, etc.), assigned the Self-Service user rights for each User Role, and added the respective service accounts
for each user Role in the Members tab.
I have not added the User IDs, but the service accounts for each user role.
I installed the VMM Console on the desktops of users. Now, the users are logging-in on the console through ‘Use current Microsoft Windows session identity’, it opens a small window of Select User Role (Select the user role you would like to use for this
session), which shows the drop-down options for all the configured user roles. When any user chooses the Administrator (VMM default) user role, users are getting connected to VMM with all administrative privileges.
This is a crucial security threat as any user is able to easily login to VMM with all administrative privileges.
Following are the members of Administrator user role:
NT AUTHORITY\SYSTEM
CONTOSO\DomainAdmins
CONTOSO\SCVMM_Admin
CONTOSO\VMM_Node1$
CONTOSO\VMM_Node2$
CONTOSO\VMM_ServiceCluster$
CONTOSO\VMM_CNO$
When the users login using their designated service accounts, it works fine and VMM shows only their assigned VMs. But the thing is that I cannot restrict the users from logging on the VMM console with Administrator user role.
Please help and advise me ASAP.
Regards,
Hasan Bin HasibThanks Madam. I will install the UR 5 today.
I have a confusion and would be thankful if you please help me.
After completing the installation of VMM 2012 R2, I directly installed the UR 4 (skipping the UR 1, UR 2, and UR 3). I though that all the features/fixes of UR1, UR2 and UR3 will also be incorporated in UR4. So I want to ask that do I need to install all
the previous Update Rollups (UR1, UR2, and UR3)?
Please advise.
Thank you.
Regards,
Hasan Bin Hasib -
Blank Screen after selecting a role within the new WebClient User Interface
Hi,
I have another Problem with the new UI.
I did all steps as described within the Best Practice Guide for the new Web Client (C04). I used this guide to set up our CRM 2007 System.
Unfortunately no matter what I do after selecting the appropriate role after logging on to the system I only get a blank screen and nothin else happens. Even changes to the navigation frame have no effect.
If I do not assign a business role I get at least this error. But after doing this I allways got a blank screen no matter what I change in customizing.
Does anyone have any clues where the error might lie?
Best Regards
ChristianHi Christian,
Could you please share me your experience how you resolved this issue?
We are at the clients place facing the same problem. After logging in it is asking to select business roles like salespro,marketpro....etc...but after selecting this role we are getting blank white screen in the browser with URl- http://*******.**.com:8030/sap/bc/bsp/sap/crm_ui_frame/default.htm?sap-client=150&sap-sessioncmd=open
We have followed the latest 2007 Best Practice where we have assigned the roles to user like : SAP_CRM_UIIU_FRAMEWORK
SAP_CRM_OR_ADMIN
SAP_CRM_OR_USER
BP_POWERUSER
In best practice 5.2 this role was assigned through Org Model where as in 2007 first it guides us to get the WebClient and then asking us to create Org Model.
you had mentioned that you got rectified through local server settings on OS level. Can you please help in explaining what exactly you did to rectify the DNS setting????
Any other solution most welcome
Regds...Arup -
How to Disply the List of Roles assigned to a selected user ?
Hi all,
I have a specific requirement to develope using Webdynpro. I want to programically display the list of roles assigned to a selected user. Could some one help me . I promise to award points for the solution.
Thank you in advance
Regards
MarutiHi Maruti,
Iterator rit = null;
try
IWDClientUser clientUser = WDClientUser.getCurrentUser();
IUser user = clientUser.getSAPUser();
rit = user.getRoles(true);
IRoleFactory rfact = UMFactory.getRoleFactory();
while (rit.hasNext()) {
String roleName = (String) rit.next();
IRole role = rfact.getRole(roleName);
}catch(Exception e)
e.getLocalizedMessage();
check this thread too
/message/1565111#1565111 [original link is broken]
Regards, Suresh KB -
Export / import tablespace with all objects (datas, users, roles)
Hi, i have a problem or question to the topic export / import tablespace.
On the one hand, i have a database 10g (A) and on the other hand, a database 11g (B).
On A there is a tablespace called PRO.
Furthermore 3 Users:
PRO_Main - contains the datas - Tablespace PRO
PRO_Users1 with a role PRO_UROLE - Tablespace PRO
PRO_Users2 with a role PRO_UROLE - Tablespace PRO
Now, i want to transfer the whole tablespace PRO (included users PRO_MAIN, PRO_USER1, PRO_User2 and the role PRO_UROLE) from A to B.
On B, I 've created the user PRO_Main and the tablespace PRO.
On A , i execute following statement:
expdp PRO_Main/XXX TABLESPACES=PRO DIRECTORY=backup_datapump DUMPFILE=TSpro.dmp LOGFILE=TSpro.log
On B:
impdp PRO_Main/XXX TABLESPACES=PRO DIRECTORY=backup_datapump DUMPFILE=TSpro.dmp LOGFILE=TSpro.log
Result:
The User PRO_Main was imported with all the datas.
But i 'm missing PRO_USER1, PRO_User2 and the role PRO_UROLE...
I assume, i 've used wrong parameters in my expd and / or impdp.
It would be nice, if anybody can give me a hint.
Thanks in advance.
Best Regards,
FrankWhen you do a TABLESPACE mode export by specifying just the tablespaces, then all that gets exported are the tables and their dependent objects. The users, roles, and the tablespace definitions themselves don't get exported.
When you do a SCHEMA mode export by specifying the schemas, you will get the schema definitions (if the schema running the export is privied) and all of the objects that the schema owns. The schema does not own roles or tablespace definitions.
In your case, you want to move
1. schemas - which you already created 1 on your target database
2. roles
3. everything in the tablespaces owned by multiple schemas.
There is no 1 export/import command that will do this. This is how i would do this:
1 - move the schema definitions
a. you can either create these manually or
b1. expdp schemas=<your list of schemas> include=user
b2 impdp the results from b1.
2. move the roles
expdp full=y include=role ...
remember, this will include all roles. If you want to limit what gets exported, then use:
include=role:"in ('ROLE1', 'ROLE2', ETC.)
impdo the roles just exported
3. move the user information
a. If you want to move all of the schema's objects like functions, packages, etc, then you need to use a schema mode
export
expdp user/password schemas=a,b,c ...
b. If you want to move only the objects in those tablespaces, then use the tablespace export
expdp user/password tablespaces=tbs1, tbs2, ...
c. import the dumpfile generated in step 3
impdp user/password ...
Hope this helps.
Dean -
hello Everyone
1.- i don't know how to merge the two qys to see in the same select (user, name, profile, role, table_name, privilege table)
Im using the tables usuarios and view dba_users : See next qry
SELECT Nvl(US.IDUSUARIO,DU.USERNAME) USUARIO,
US.DESCRIPCION NAME,
ACCOUNT_STATUS STATUS,
DU.PROFILE,
CREATED FECHA_CREACION
FROM USUARIOS US,
SYS.DBA_USERS DU
WHERE DU.USERNAME = US.IDUSUARIO(+)
UNION
SELECT Nvl(US.IDUSUARIO,DU.USERNAME) USUARIO,
US.DESCRIPCION NAME,
ACCOUNT_STATUS STATUS,
DU.PROFILE,
CREATED FECHA_CREACION
FROM USUARIOS US,
SYS.DBA_USERS DU
WHERE DU.USERNAME = UPPER(US.IDUSUARIO)
ORDER BY NAME;
this extract me, USER, REAL NAME, STATUS, PROFILE, CREATION_DATE
JP01 Johan Pena OPEN DEFAULT 05-07-2010
on the other hand:
select * from role_tab_privs
this extract me, ROLE, TABLE_NAME and PRIVILEGE
DBA TABLE1 SELECT
DBA TABLE1 INSERT
DBA TABLE2 DELETE
1.- i don't know how to merge the two qys to see in the same select (user, name, profile, role, table_name, privilege table)
2.-i want something like this.
USER, REAL NAME, STATUS, PROFILE, CREATION_DATE ROLE, TABLE_NAME PRIVILEGE
JP01 Johan Pena OPEN DEFAULT 05-07-2010 DBA TABLE1 SELECT
JP01 Johan Pena OPEN DEFAULT 05-07-2010 DBA TABLE1 DELETE
Ect Ect. Ect.
who can HELP ME.I have part understood your requirement and assumed the rest! Hence, I have used dba_role_privs in addition to the list of tables you used.
Also, I think your LEFT OUTER JOIN on sys.dba_users is incorrect. I think you are trying to get all users from USUARIOS table for which roles / privileges exist in the database. If that is what you want the following query should help out. If not change the LEFT keyword in the MAIN query (NOT the one in WITH clause) to RIGHT but the results might be unpredictable.
Note: Using ANSI standard keywords for JOIN allows you to use functions in the JOIN clause (such as UPPER(column name), which the Oracle propreitary notation does not allow and hence made you opt for the UNION option).
WITH OS AS
SELECT
DU.USERNAME
,DU.ACCOUNT_STATUS
,DU.PROFILE
,DU.CREATED
,DRP.GRANTED_ROLE
,RTP.TABLE_NAME
,RTP.PRIVILEGE
FROM
sys.dba_role_privs drp
LEFT OUTER JOIN
role_tab_privs rtp
ON
( drp.granted_role = rtp.role )
LEFT OUTER JOIN
sys.dba_users du
ON
( du.username = drp.grantee )
SELECT
NVL (US.IDUSUARIO, OS.USERNAME) USUARIO
,US.DESCRIPCION NAME
,OS.ACCOUNT_STATUS STATUS
,OS.PROFILE PROFILE
,OS.CREATED FECHA_CREACION
,OS.GRANTED_ROLE ROLE
,OS.TABLE_NAME TABLE_NAME
,OS.PRIVILEGE PRIVILEGE
FROM
USUARIOS US
LEFT OUTER JOIN
OS -- temporary result set created using WITH clause above
ON
UPPER (US.USERNAME) = OS.USERNAME
ORDER BY 2 ;Edited by: VishnuR on Jul 5, 2010 8:44 PM
Edited by: VishnuR on Jul 5, 2010 8:47 PM -
CUP: Request type change account- Change of user data other than roles
Hi Experts,
I am using the request type change account to change the user type and/or validity of the user. In the description of this request type it says I can use it to request additional access and other changes to an account. Yet when i try to change user validity.. CUP asks me to select one role when I try to submit the request..
Is there any thing else that I need to do so that the request type works for account changes as well?
Thanks!Hi,
Go to End Configuration -> End user personlization, select the checkbox next to 'Roles' and click on change. Change the 'Manadatory' dropdown to 'No'. Now, save the changes and create the change request.
Alpesh -
Get authorization data by passing user role
Hi All,
Can anybody please tel me to retrieve user authorization data if i pass user role i want to get whole authorization data for that role.
Thanks,I am not sure about the authorization objects/values for a given role, but you can get that for a user using the FM SUSR_USER_AUTH_FOR_OBJ_GET.
-
Program to regenerate user variants for dynamic date selection!
Hello all:
We upgraded to ECC6.0 from 4.6C and there are some variants that user created in 4.6C in which they set dates like date = date - 1day something like that (basically dynamic date selection). These variants are not working in ECC6.0 unless the user clicks on the variant button and resaves it!! Does anyone know if there is any SAP program that I can run that does this automatically? Rewards assured.
Thanks.
MithunThanks for the reply Rob. We already ran RSVARDOC_610! Is there any specific program just for the issue I am having?
Thanks.
Mithun -
How to notify the selected user of a role.
Hi,
Currently I have GP Role Approving Officer link to the EP Group : ApprovingOfficer and GP Role Applicant link to EP Group: Applicant. I have also tag a list of EP user to the EP Group accordingly.
Whenever the Applicant submit a request via Web Dynpro, the Applicant can select a list of person who of the ApprovingOfficer Group from a dropdown list in WD UI. Once the Applicant submits the request, there will be a task pending in the ApprovingOfficer GP Runtime.
I want only the task to be pending only for that selected person of the ApprovingOfficer instead of all the person which is the current case.
For example,
Role - ApprovingOfficer consisting user A, user B and user C
If I am from dept A, the WD UI will displayed user A and user C for selection. Whenever, I select user A, I would like the pending request entry to be reflected in user A GP Runtime only.
how to I do that? can advise?
thank you.Hi cocomo,
This is possible. In GP design time, now I think you are assigning the EP Groups at the block level (for each action). That is the reason the request is send to all the users (approvers) in that group and they all will see it as pending task in their inbox.
You have to pick the users dynamically at runtime. For this you can follow these steps.
1. When the Initiator selects his approver from the dropdown list of webdynpro UI (It should be a portal ID), capture it from the current context element and expose it into GP Context as an attribute say DynApprover (in complete method.... before this you have to define an attribute DynApprover in getDescription also).
2. In GP Design time at the block level, instead of assigning the roles directly, make it dynamic -
>
-- Select the Process and click on Roles Tab.
-- Select the Administrator, Overseer, Owner roles manually and leve it as "Initiation Defined" as Role Type
--Change the Approver's Role Type to "Runtime Defined" (Select this option from the drop down in RoleType column).
-- Select the Approver's Block and click on Roles Tab.
-- In the Processor of Approver's Action Choose the GP Attribute (that you have filled with dropdown value and exposed already) from the dropdown list of the "Filled from context Parameter" Column.
Let me know if you need any clarifications and I am sure it can be made to work....
Regards
Ramesh -
VL10D user role tab is greyed out
Can someone please help me.
I am using Tcode and the "User role" tab is greyed , means I cant pick any thing. Is there any place in the configuration where I can go and make changes to the tcode.
Thanks,
SaharHi,
To change the profile go to "SPRO --> Logistics Execution --> Shipping --> Worklist --> Configure Lst profile"
To assign this profile to Transaction go to "VL10CUV"
Regards,
K.Annadurai. -
How can I add a user Role member that is from a different domain
We are currently building out SCOM 2012 R2 to provide monitoring as a service to some of our customers. As of now we have the RMS on our own department's domain (Domain A) which we have full control of and we have a gateway server that is on the company
wide domain (Domain B) so that we can monitor other departments devices as the leverage this system.
Monitoring is working just fine on both domains and we are just working on fine tuning SCOM so that we can roll it out as a service we offer to our customers. One of the next steps we are working on before rolling it out is giving specific users access
to view only their own devices, dashboards, and groups. So I created a Read-Only profile and went to add a user to test it out, but that user is on Domain B and SCOM is unable to resolve this account. I'm seeing Event ID 26319 with Error Code 1332.
How can I get SCOM to discover devices on a different domain so that I can give them different permissions for accessing the Operations Console and/or Web Console? Is this possible?
Here is the Error I'm seeing.
Log Name: Operations Manager
Source: OpsMgr SDK Service
Date: 2/4/2015 1:11:59 PM
Event ID: 26319
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxx.xxxx.xxxxxxxx.xxx
Description:
An exception was thrown while processing UpsertUserRolesV2 for session ID uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="OpsMgr SDK Service" />
<EventID Qualifiers="49152">26319</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-04T21:11:59.000000000Z" />
<EventRecordID>172748</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>xxxxx.xxxx.xxxxxxxx.xxx</Computer>
<Security />
</System>
<EventData>
<Data>UpsertUserRolesV2</Data>
<Data>uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40</Data>
<Data>The creator of this fault did not specify a Reason.</Data>
<Data>System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).</Data>
</EventData>
</Event>
Thanks for any help I can get in resolving this issue.
JakeThe SCOM Management Server is in Domain A. I've tried it already and it has failed.
So just to clarify the method I used was to go to Administration>Security>User Roles. Then New User Role>Read-Only Operator. In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine. On
the next page which is Group Scope I checked the one group I want this account to have access to and then click next. This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
approved" and chose the folder of dashboards I want this account to access and then click next. This brings me to the Summary and I click "Create". At this point it thinks for a moment then closes out the wizard but the new Read-Only
Operator does not appear. I then look in Event Viewer and see the Event I pasted above.
Am I doing something wrong here? Any guidance on how to get around this issue would be much appreciated.
Thanks,
Jake -
User role for user authentication in a SOAP receiver channel
Hi,
What is the role required for a user in a SOAP receiver channel. This user is specified in the User Authentication while configuring the channel.Hi,
User Authentication is not mandatory but If your Web service requires logon data, select the Configure User Authentication checkbox and fill in the corresponding fields.
If the Web service is outside your system landscape and you need to address a proxy
server, select the Configure Proxy checkbox.
The sender SOAP adapter does not require a SOAP action, but you always have
to apply logon data when using the SOAP adapter. In the central adapter engine
you can use a service user such as xiappluser; in a non-central adapter
engine or a PCK you must use one of the user names assigned to security role
xi_adapter_soap_message for component XISOAPAdapter.
Regards,
Divya -
OIA : Import Users, Accounts, User Role Memberships and Entitlements
Hi,
I have intgrated OIM 11.1.1.5 with OIA 11.1.1.5. I am trying to execute scheduled job in OIA " Import Users, Accounts, User Role Memberships and Entitlements"
which in turn invokes scheduled job some of them are :
OIM Staging Tables Collection Status Failed with following exception
Accounts imported from OIM staging table : Status In progress for more than 2 hours
Please provide pointer to resolve this :
11:06:15,915 DEBUG [RbacxDataImporterImpl] --> imported 28 metadata items StopWatch 'import Attribute Value Metadata': running time (millis) = 0
11:06:15,917 INFO [IamDbEntitlementImportHelperImpl] Imported 28 entitlements
11:06:15,917 DEBUG [DBIAMSolution] publishing import completed event...
11:06:15,917 DEBUG [AuthenticationEventsListener] Listening application event
11:06:15,917 DEBUG [DefaultIAMListener] Queuing IAM Event.com.vaau.rbacx.iam.IAMEvent[source=com.vaau.rbacx.iam.db.DBIAMSolution@133e9a5e]
11:06:15,917 DEBUG [IamDbEntitlementImportHelperImpl] Completing import run id ---> 31
11:06:15,917 DEBUG [DefaultJobMonitor] MonitorMap{status=3, totalCount=28, currentCount=28, iamType=ENTITLEMENTS IMPORT}
11:06:15,917 DEBUG [DefaultJobMonitor] MergedMap{status=3, totalCount=28, currentCount=28, iamType=ENTITLEMENTS IMPORT}
11:06:15,917 DEBUG [DBIAMSolution] Importing Users
11:06:15,918 DEBUG [DefaultJobMonitor] MonitorMap{status=6, totalCount=0, currentCount=0, iamType=DATA IMPORT}
11:06:15,918 DEBUG [DefaultJobMonitor] MergedMap{status=6, totalCount=0, currentCount=0, iamType=DATA IMPORT}
11:06:15,918 DEBUG [IamDbUserImporterImpl] DBUsers Import Start ...
11:06:15,918 DEBUG [DBIAMSolution] publishing import starting event...
11:06:15,918 DEBUG [AuthenticationEventsListener] Listening application event
11:06:15,918 DEBUG [DefaultIAMListener] storing new ImportRun
11:06:15,918 DEBUG [SequenceGeneratorServiceImpl] Getting MemorySequence for sequence name com.vaau.rbacx.iam.domain.ImportRun
11:06:15,918 DEBUG [SequenceGeneratorServiceImpl] Returning count for sequence name com.vaau.rbacx.iam.domain.ImportRun, count = 32
11:06:15,920 DEBUG [SequenceGeneratorServiceImpl] Getting MemorySequence for sequence name ImportRunStepId
11:06:15,920 DEBUG [SequenceGeneratorServiceImpl] Returning count for sequence name ImportRunStepId, count = 32
11:06:15,924 DEBUG [IamDbUserImporterImpl] Starting import run id ---> 32
11:06:15,987 ERROR [IamDbUserManagerImpl] Problem retrieving IAM userIds from db
*org.springframework.jdbc.UncategorizedSQLException: SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [null]; error code [0];*
--- The error occurred in com/vaau/rbacx/iam/db/dao/ibatis/maps/IamDbUser.xml.
--- The error occurred while executing query.
--- Check the select id from oia_staging_users .
--- Check the SQL Statement (preparation failed).
--- Cause: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource; nested exception is com.ibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in com/vaau/rbacx/iam/db/dao/ibatis/maps/IamDbUser.xml.
--- The error occurred while executing query.
--- Check the select id from oia_staging_users .
--- Check the SQL Statement (preparation failed).
--- Cause: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:83)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:80)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:80)
at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:212)
at org.springframework.orm.ibatis.SqlMapClientTemplate.executeWithListResult(SqlMapClientTemplate.java:249)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForList(SqlMapClientTemplate.java:296)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForList(SqlMapClientTemplate.java:290)
at com.vaau.rbacx.iam.db.dao.ibatis.SqlMapIamDbUserDao.findAllUserIds(SqlMapIamDbUserDao.java:48)
at com.vaau.rbacx.iam.db.manager.IamDbUserManagerImpl.getUserIds(IamDbUserManagerImpl.java:48)
at com.vaau.rbacx.iam.db.helpers.IamDbUserImporterImpl.readUsers(IamDbUserImporterImpl.java:78)
at com.vaau.rbacx.iam.db.DBIAMSolution.doDataLoad(DBIAMSolution.java:547)
at com.vaau.rbacx.iam.db.DBIAMSolution.loadData(DBIAMSolution.java:284)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.dataLoad(RbacxIAMServiceImpl.java:510)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy132.dataLoad(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.DbIamJobExecutor.execute(DbIamJobExecutor.java:83)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: com.ibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in com/vaau/rbacx/iam/db/dao/ibatis/maps/IamDbUser.xml.
--- The error occurred while executing query.
--- Check the select id from oia_staging_users .
--- Check the SQL Statement (preparation failed).
--- Cause: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryWithCallback(MappedStatement.java:201)
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryForList(MappedStatement.java:139)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForList(SqlMapExecutorDelegate.java:578)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForList(SqlMapExecutorDelegate.java:552)
at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.queryForList(SqlMapSessionImpl.java:118)
at org.springframework.orm.ibatis.SqlMapClientTemplate$3.doInSqlMapClient(SqlMapClientTemplate.java:298)
at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:209)
at org.springframework.orm.ibatis.SqlMapClientTemplate.executeWithListResult(SqlMapClientTemplate.java:249)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForList(SqlMapClientTemplate.java:296)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForList(SqlMapClientTemplate.java:290)
at com.vaau.rbacx.iam.db.dao.ibatis.SqlMapIamDbUserDao.findAllUserIds(SqlMapIamDbUserDao.java:48)
at com.vaau.rbacx.iam.db.manager.IamDbUserManagerImpl.getUserIds(IamDbUserManagerImpl.java:48)
at com.vaau.rbacx.iam.db.helpers.IamDbUserImporterImpl.readUsers(IamDbUserImporterImpl.java:78)
at com.vaau.rbacx.iam.db.DBIAMSolution.doDataLoad(DBIAMSolution.java:547)
at com.vaau.rbacx.iam.db.DBIAMSolution.loadData(DBIAMSolution.java:284)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.dataLoad(RbacxIAMServiceImpl.java:510)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy132.dataLoad(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.DbIamJobExecutor.execute(DbIamJobExecutor.java:83)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
... 1 more
Caused by: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:588)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:277)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:647)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:614)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:608)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.vaau.commons.springframework.aop.interceptor.DataSourceInterceptor.invoke(DataSourceInterceptor.java:65)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy131.getConnection(Unknown Source)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
at org.springframework.jdbc.datasource.TransactionAwareDataSourceProxy$TransactionAwareInvocationHandler.invoke(TransactionAwareDataSourceProxy.java:210)
at $Proxy118.prepareStatement(Unknown Source)
at com.ibatis.sqlmap.engine.execution.DefaultSqlExecutor.prepareStatement(DefaultSqlExecutor.java:519)
at com.ibatis.sqlmap.engine.execution.DefaultSqlExecutor.executeQuery(DefaultSqlExecutor.java:173)
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.sqlExecuteQuery(MappedStatement.java:221)
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryWithCallback(MappedStatement.java:189)
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryForList(MappedStatement.java:139)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForList(SqlMapExecutorDelegate.java:578)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForList(SqlMapExecutorDelegate.java:552)
at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.queryForList(SqlMapSessionImpl.java:118)
at org.springframework.orm.ibatis.SqlMapClientTemplate$3.doInSqlMapClient(SqlMapClientTemplate.java:298)
at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:209)
at org.springframework.orm.ibatis.SqlMapClientTemplate.executeWithListResult(SqlMapClientTemplate.java:249)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForList(SqlMapClientTemplate.java:296)
at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForList(SqlMapClientTemplate.java:290)
at com.vaau.rbacx.iam.db.dao.ibatis.SqlMapIamDbUserDao.findAllUserIds(SqlMapIamDbUserDao.java:48)
at com.vaau.rbacx.iam.db.manager.IamDbUserManagerImpl.getUserIds(IamDbUserManagerImpl.java:48)
at com.vaau.rbacx.iam.db.helpers.IamDbUserImporterImpl.readUsers(IamDbUserImporterImpl.java:78)
at com.vaau.rbacx.iam.db.DBIAMSolution.doDataLoad(DBIAMSolution.java:547)
at com.vaau.rbacx.iam.db.DBIAMSolution.loadData(DBIAMSolution.java:284)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.dataLoad(RbacxIAMServiceImpl.java:510)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy132.dataLoad(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.DbIamJobExecutor.execute(DbIamJobExecutor.java:83)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
... 1 more
Caused by: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:421)
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:389)
at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection(DriverConnectionFactoryAdapter.java:134)
at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.createOnePooledConnectionInternal(UniversalConnectionPoolImpl.java:1613)
at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.access$600(UniversalConnectionPoolImpl.java:1421)
at oracle.ucp.common.UniversalConnectionPoolImpl.createOnePooledConnection(UniversalConnectionPoolImpl.java:488)
at oracle.ucp.common.UniversalConnectionPoolImpl.addNewConnections(UniversalConnectionPoolImpl.java:988)
at oracle.ucp.common.UniversalConnectionPoolBase.getInitialConnections(UniversalConnectionPoolBase.java:541)
at oracle.ucp.common.UniversalConnectionPoolBase.start(UniversalConnectionPoolBase.java:655)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:271)
... 51 more
Caused by: java.sql.SQLRecoverableException: IO Error: Invalid number format for port number
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection(DriverConnectionFactoryAdapter.java:130)
... 58 moreHi Pallavi,
i have the same problem, can you provide me more specific details?
-exactly oimjdbc.properties location please?
-which is what I have to modify?
Thanks in advance!
Maybe you are looking for
-
WRT350N + WMP300N = BSOD Crash on Win XP Pro SP2?
Yes, the problem I am having is that with WRT350N + Wireless + WMP300N = BSOD Crash on Win XP Pro SP2. Really, from what I can tell, WRT350N + Wireless = BSOD Crash on Win XP Pro SP2. Yes, I know, a router shouldn't be able to crash a computer, P
-
F110 - Program RFFOAVIS_FPAYM
Dear Friends, Using T.code F110 Payment Program was completed.In printout/datamedium i have selected program RFFOAVIS_FPAYM and variant PCCFR. I checked the payment run log and getting this error messages. Step 001 started (program SAPFPAYM_SCHEDULE
-
hello, i'm a student and i want to know how to delete duplicate in an array. I explain i have an array and i want to delete all the value which appears more than one time. you can see an exanple in attachment, with some explanation. i use
-
Error in processing XSL template
Hi I am trying to build an report by using XSL template in BI Publisher 10g integrated with siebel. When i uploaded the template to run the report I am getting the following error Caused by: oracle.xdo.parser.v2.XPathException: variable not defined:
-
MBAM client installation fails
I facing a strange issue while installing MBAM client in windows 7 enterprise. I am using the CLI method to install client on Test machines and it give error "Program to big to fit into Memory". Did anyone faced this kind of issue? If yes please advi