VL32N - Receipt reversal issue

Hello Friends,
We mistakenly reversed the VL32N receipt using MIGO instead of VL09.  the reversed material document(102) is again reversed(101) using MIGO but still not able to do VL09 for that inbound delivery.
Is there any way to overcome the mistake and reverse the GR for the inbound delivery from VL09?
Appreciate you support.
Thanks and Regards,
Gopi

Thanks Manish. Please look at steps below.
GR (DOC1) done from VL32N for a inbound delivery. movement type : 101, GM status changed to 'C'
Cancelled the GR(DOC1) from MIGO instead of VL09. Material doc DOC2 created with movement type 102.   its a  mistake, as the system is configured to do via VL09. GM status is still 'C'
As we realized the mistake, we just cancelled the DOC2 and posted DOC3 with movement type 101
now we try VL09 to cancel the goods receipt but it is saying all the documents are reversed.
Please let me know is there any way to correct this.

Similar Messages

  • Material receipt reversal issue

    Here is the issue:
    Several service entry sheets were entered twice into SAP and approved for Vendor .  Upon approval, material receipt documents were created and because the vendor is ERS, invoices were created and paid.  Manual credit memos have been processed in AP so the vendor has been charged back but the GR/IR GL account won't clear without the material receipt reversals.  Anybody knows how to do the correction?    
    please advise.
    thanks in advance!

    Hi
    please check this link
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMSRV/MMSRV.pdf
    hope it helps to understand.
    regards
    Srinivas

  • Goods receipt reversal - material valuation

    Friends can any one explain the goods receipt reversal scenario
    and how it will affect the material valuation.
    I am going through SAP HELP but i did not understood, the concept behind it and how it affect the material valuation once  the goods receipt is entered and
    after cancelling the good receipt in case of "moving price" and the material valuation carried out.
    Please help me
    and also i want to know transaction for goods reciept reversal .....
    Edited by: VENKATESH MADANAGOPAL on Dec 15, 2008 7:29 AM

    Dear Venkatesh,
    Most goods movements in Inventory Management lead to changes in stock quantity and therefore in stock value: In the case of goods receipts, the stock value increases and in the case of goods issues, the stock value is reduced.
    For materials valuated at a moving average price, the material price can also change in the case of goods receipts for purchase orders. This is the case if the purchase order price differs from the material price.
    Planned Delivery Costs for a purchase order are also included in valuation when goods are received. When the goods receipt is posted, provisions are created for planned delivery costs; thus the material is immediately valuated at the expected price. A subsequent debit/credit when the invoice is received is only necessary if there are variances between the stipulations of the order and the invoice.
    It is also possible to post the net value of goods received. In this way, cash discounts that have been agreed upon are taken into account in valuation at this point. This means that when a goods receipt is posted for a material with moving average price control, the value of the order minus the cash discount is debited.
    Material price changes can also occur during the following transactions in Inventory Management:
    Regards..... Sri

  • Opening closing stock receipts and issues analysis

    Hi,
    Is it possible to match the values in the MC.A (Total Receipts and Issues Values) to Gl Accounts,
    If it is possible How?

    Hi,
    from within the MC.A there is a link directly to the accounting documents that are involved.
    Go to the menu option Extras > accounting doc for material when you have the data for a material displayed.
    By careful and make sure that you have selected the correct flag on the values window of the initial selection screen.
    Steve B

  • BAPI_GOODSMVT_CREATE Goods Receipt Reversal

    Hello All,
    According to SAP docs I need to use goodsmvt_code-gm_code = '06' but with movement type 102 I get an error message "Goods movement not possible with movement type 102". Works fine if I use regular goods receipt code '01' and movement 102. Please let me know if I’m missing something here.
    Also, how do you post goods receipt reversal referencing goods receipt and not PO with BAPI_GOODSMVT_CREATE?
    Thanks,
    Leon

    Hi Leon,
    I found the following documentation by SAP seems to be helpful for you.
    <b>You can use the Cancel method to reverse goods movements. But you may also want to cancel a goods movement without referring to a material document (see the Cancel method).
    If you want to work without referring to the document, you have to fill the field BAPI_GM_ITEM_CREATE-XSTOB in the interface (import table GOODSMVT_ITEM). In this case, the system converts the movement type assigned in the interface to the reversal movement type. Alternatively, you can set the reversal movement type in the interface. In this case, the BAPI_GM_ITEM_CREATE_XSTOB field must be transferred blank.
    If you want to cancel a goods movement with reference to a reservation (without using the Cancel method) you can only transfer the field BAPI_GM_ITEM_CREATE_XSTOB if it is filled. Movement types are not transferred when you post with reference to a reservation, as the movement type is contained in the reservation item.</b>

  • Goods Receipt reversal

    HI
    Following error is coming in goods receipt reversal account determination for entry dsds prd bs01_zc01 not possible,
    dsds-company code,bs01-plant,zc01-valuation class,why system asking to assign gl account in obyc for prd,(price difference account).
    Regards
    Sam

    Hi,
    Is the material valuated at standard cost and there has been a price change?

  • Urgent:Receipt and Issue values in Inventory 0IC_C03

    Dear friends,
    In standard cube 0IC_C03 keyfigures  Valuated stock Qty and  value is matching with R/3 Transaction code MB5B.
    Receipt quantity and Issue quantity in MB5B is not matching for some of the materials.But it matches with R/3 Tcode MB51 as it have all the movement types.
    1.Pls suggest what needs to be done in BW to match the data with MB5B Receipt and Issues?
    2.What are the movement types are used in MB5B?.(For ex 321 is displayed in MB51 but not included in the R/3 report MB5B)
    Thanks in advance for your help..

    Dear Gurus,
    Recently we had Implemented the Inventory Management for Retail. Taken downtime and loaded the data by following all the steps. The data is successfully loaded till Nov 2010 to till date. Now when I am comparing the data with R3 using MB51, I am getting the below issues.
    We have report in BI, on Material Ledger and we run above query for the duration of 1st Jan 2011 to 31st Jan 2011, This appear to be difference in the output.
    BI opening quantity does not match with ECC MB5B opening matches.
    1. Few of my BI entries of Movements are not present in R3.
    2. Few entries are with no movements present in BI.
    3. Some entries of R3 are not present in BI.
    Can anyone guide me....

  • Material Reverse Issue

    I had a issue with a reverse issue 262 and it put the material into  914 bin(GI area for Production Order).We tried LT10 but error message 'System cannot find source bin".
    Please Help!
    Kenny

    Hi,
    If the quantity of quant in 914 is negative (-2pc) you cannot move it...that's all.
    You mentioned in your first message that you reversed the goods issue. If you reversed the goods issue and the stock level in 914 was zero before the reverse movement you should have a +quant in 914.
    Isn't it possible that you posted GI (e.g. mvt 261 10 pcs) --> the stock became negative --> you reversed only part of the GI quantity (e.g. 262 8 pcs) --> alltogether the stock level is negative (-2 pcs).
    Generally, if you post GI in this scenario:
    1. A negative quant appears in 914
    2. A TR is created (if you process the TR, a TO will be created and the stock will be transferred from "normal" storage type to 914)
    So, if you process the first TR (that is created for the GI) you will move the consumed qty in 914 (10 pcs). In this case you will have 8 pcs in the example.
    remarks:
    a) Whether a TR is created or not depends on your settings in WM/IM interface (SPRO > LE > WM > Interfaces > IM > Define Movement Types).
    b) You can check the created TRs in trx LB10
    Regards,
    Csaba

  • No control to make receipt or issue against Production order

    Hi all,
    In production order we are able to make receipt without issuing input material and able to make issue or receipt the qty which we decide(unlimitted), Is there any solution for this to restrict. Please help me out in regards ASAP.
    Regards,
    Param.

    Hello,
    I just posted a reply for Karthi on a similar topic please read the same using the below link
    Production order
    Suda

  • Problem in receipt stock & Issue stock

    Dear All,
    I have some problem in inventory cube 0IC_C03. when we execute query for total stock ,total Receipt stock &Total issue stock, we found that total stock is matching with MB5B but issue stock & receipt stock is not matching. Then I added material doc no. & movement type in cube 0IC_C03 and checked query material doc no. wise & movement type wise. I found that some material docs no are not coming in MB5B which are for stock transfer. & some movement type such as 310,202,602,552 (which are reverse of 309,201,601,551 Issue stock) is coming in BW for issue stock with negative values in Bex query.But in MB5B these movement types are coming in receipt stock.Therefore total receipt qty and issue qty is not matching with MB5B. Please suggest what restrictions i shuold make in BW so that my query will match with MB5B.
    Thanks in advance,
    regards,
    Yogesh

    Dear Guys,
                    Regards.Even we are stuck up with the same above issue for quite sometime..Would be great if someone could throw light on this...........if possible...
    Manythanks
    arun

  • Good Receipt Reversal using Idoc WMMBXY

    Hi to all,
    I've the following issue in a 4.6C R/3.
    I want to reverse a Goods Receipt from Purchase Order (MB01; goods movement 102) using inbound idoc WMMBXY.
    When I try to reverse some quantity in the PO of a material position without batch, there's no problem, the Idoc enter and reversal goes well.
    But when I try to reverse some quantity (i.e. 3 PCE) of a material position not batch managed, Idoc goes in status 51 and gives following error:
    "Deficit of PU GR quantity 3 PCE : [MATERIAL] [PLANT] [ST.LOC] [BATCH]
    Message no. M7 021"
    Anyone can help me?
    Thanks a lot,
    Alex

    No one can help me?

  • Receipt Reversal created new receipt and re-attempted to charge card

    We had a Standard Receipt that needed to be reversed because the card was declined. We reversed the receipt and are currently waiting for a new card from the customer so that we can take care of the open balance on their account. However, when we ran our normal Receipt Batches/Remittances, a new (duplicate) receipt was created for this amount for this customer automatically (with a different receipt number).
    How could this happen?

    It seems the apple status page never changed to show that there was an outage or issue. That was one of the first places I looked.
    I restarted iPhoto and tried again - I click the "buy card" button, and nothing happens. 

  • Create Accounting error for receipt reversal

    Hi
    Hope every one is well and upbeat over here. I am facing an issue in the receivables module and some expert's kind assistance is required.
    A client entered a Miscellaneous receipt, the customer made the payment through credit card. The receipt was later reversed, When the client runs the create accounting report, it gives the following error
    Line     Error Number     Error Message
         0     The accounted amount and entered amount for the subledger jounral entry line have different sign. Please inform your system administrator or support representative that:
    The sources assigned to the accounting attributes Accounted Amount and Entered Amount have different sign for extract line number 738414. Please make sure the sources assigned to the two accounting attributes have same sign, or assign different sources to these accounting attributes.
    there is another error message which is:
    The subledger journal entry does not balance in the entered currency. Please verify the entered amounts on the journal entry lines.
    Please provide me with a solution to this problem.
    Regards
    Salman Tariq

    Please see these docs.
    Invoice Apparoval Throws Error App-Sqlap-10000 Ap_etax_services_pkg.Synchronize_for_doc_seq [ID 1158523.1]
    When Cancelling An Invoice User Receives Error APPSQLAP-10000 ORA-00000 normal, successful completion occured in AP_INVOICES_PKG.UPDATE_ROW [ID 886316.1]
    Error When Canceling Invoices APP-SQLAP-10000 AP_ETAX_SERVICES_PKG [ID 974712.1]
    Thanks,
    Hussein

  • AR Receipt Reversed in a closed Period without System warning

    Is there a way of stopping AR users from mistakenly reversing AR Receipt in a closed period as R12 does not give any system warning before reversal.
    Especially as the receipt period is already closed and amount cleared and reconciled in Cash Management.
    Surely the System should warn users before reversing but this is not the case in Account Receivable.
    Has anyone else come accross this issue?
    Thanks
    Arin
    Edited by: 907719 on 12-Jan-2012 11:19

    Hello Arin ,
    Greetings for the day!!!
    When you reverse a receipt that was previously reconciled in Cash Management, there is no automatic process to alert the user. This is a standard functionality.
    There is an Enhancement request "Bug 3888508 PROMPT WHEN RECEIPTS RECONCILED IN CE ARE REVERSED" for this issue.
    Best Regards,
    Chinmayee

  • Goods Receipt Reversal For Excisable Materials

    Hi,
    We did the Goods Receipt For Excisable Materials. At the time of Goods Receipt, we selected the Excise Option "Only Part 1". And out RG23A Part I Register got updated.
    Later we had to reverse the Goods Receipt.
    What I want to know is that what do I need to to reverse the entry in RG23A Part I Register.
    Do I need to update the Register using T Code, J1I5, If yes which Rcpt/Issu classification codes option should I select.
    IIM     Issued for use/installation or in manufacture
    IPD     Issued for clearance/Removal on payment of duty
    IWD     Issued for clearance/Removal without payment of duty
    IDH     Removal from factory on payment of duty for Home use
    IDE     Removal on payment of duty for export under no bond
    IWE     Removal without payment of duty for export under bond
    IWT     Removal without payment of duty for transfers
    IWO     Removal without payment of duty for other purpose
    Please guide.
    Regards,

    Hi,
    as per your thread you have posted you have captured the Excise Duty.that means Part I is done . Before Posting the  Vendor Invoice (MIRO) transaction you have to post the Excise Invoice by the help of the Transaction code J1IEX..selecting POST option.
    At the Month End you have update the register by the the Transaction code J1I5.( Selecting the proper Register) After that you have to go for J2I6 to get the all excise values you have taken Excise Credit for the month.
    As per your requirement If you want to Cancel the Excise Invoice after capturing the Excise value,,,,then you have to cancel the GR and Cancel the Excise invoice by J1IEX ( by selecting Cancel option).
    With Regards,
    Sudipto

Maybe you are looking for