Vlan and SSID not showing in AP Web Interface

We have a couple of APs that do not show the Vlans and SSIDs through the AP web interface. If you go to the SSID manager page in web interface, the page comes up but does not show any of the SSIDs configured. The same goes for Services - Vlan. That page comes up but does not show any Vlans configured. If you telnet to the APs, you see the listed mssid and all the SSID interfaces. The SSIDs on the APs are functional and working. This just makes it difficult to use the web interface for these APs. I have tried to compare running configs on APs where web interface is not showing this and on APs that it is showing but cannot see any differences.
Thanks.

Unsupported things are never documented. You can't possibly list all browsers that you don't support.
But if it's not mentionned clearly as supported then it means "it might work but we never tested with it".
Let us know how it goes with the 12.4.21
Nicolas
===
Don't forget to rate answers that you find useful

Similar Messages

IBOutlet UITextField and UILabel not showing up in the Interface Builder

This is weird -- I have defined the fields for UITextField and UILabel's... but they are not showing up for me to connect the objects to the View. Any ideas?
DistanceViewController.h
@interface DistanceViewController : UIViewController {
IBOutlet UITextField *txtMeters;
IBOutlet UITextField *txtYards;
IBOutlet UITextField *txtStatuteMiles;
IBOutlet UITextField *txtNauticalMiles;
IBOutlet UILabel *lblStatus;
@property (nonatomic,retain) IBOutlet UITextField *txtMeters;
@property (nonatomic,retain) IBOutlet UITextField *txtYards;
@property (nonatomic,retain) IBOutlet UITextField *txtStatuteMiles;
@property (nonatomic,retain) IBOutlet UITextField *txtNauticalMiles;
@property (nonatomic,retain) IBOutlet UILabel *lblStatus;
- (IBAction) updateText: (id) sender;
@end
DistanceViewController.m
@synthesize txtMeters, txtYards, txtStatuteMiles, txtNauticalMiles, lblStatus;
- (IBAction) updateText: (id) sender {
The DistanceViewController.xib does not allow me to attach any of the fields to their respective variables. It does allow me to connect the method updateText though.... it compiles and the test run shows the fields, but the method never triggers (of course...)

Have you tried Build->Clean All Targets? That's my best guess, but if it doesn't help here are a few sanity checks that might point somewhere:
Ctrl-click on the view controller object (normally the File's Owner proxy) to bring up its connections panel. Do you see updateText under received actions, but none of the declared IBOutlets under Outlets? Do you see the view outlet, and is it connected to the view? I assume the controller object is set to the DistanceViewController class (else how does it know about updateText?), but it wouldn't hurt to check. I would even go to the Identity Inspector, set the object's class to UIViewController, look at the connections panel, then set it back to DistanceViewController. Select the controller object again, Ctrl-click to bring the connections panel back, then open the Connections Inspector. Does the panel match the inspector?
If none of the above give you a clue, I might go back to DistanceViewController.h, remove the action method, then go back to IB and see if the change is reflected in the connections panel or inspector.
I can't think of what else to try atm, but I'll post again if I have another idea.

Business catalyst site is not showing up on web searches

I built my site in Muse and published directly from Muse onto Adobe Business Catalyst. It has been a couple of months and this site is not showing up on web searches. I believe it has something to do with my Business Catalyst settings. Frustration has set in and I'm turning to this commuity to seek direction. The site is edgeadvertising.ca
Should I be looking at Googles webmaster tools?

Hi edgydoug1,
You have a challenging case since "Edge Advertising" appears to be a common business name with many other established websites for "Edge Advertising" or "Cutting Edge Advertising" businesses around the world.
First, I'm going to contradict Gaurav. I may be interpreting what I see on Google incorrectly, but it looks to me as though Google has indexed your site. It's a one page site. Correct?
A few things you'll want to do to improve the chances searchers will find your site:
1) Set the Page Title for your page in the Page Properties dialog. I recommend setting it to your business name. You might consider including Winnepeg in the page title, since that will increase the odds that someone looking for "Edge Advertising" in your area will find you, rather than the Edge Advertising in Washington, D.C., Tampa Bay, Fairport, NY, Houston Texas, etc.
2) You might consider putting your contact information where your copyright currently is.
3) Enter keywords for your page in the Page Properties dialog Metadata panel. Be sure to include Winnepeg and Manitoba (spelled out), along with your business name and the services you provide.
4) Pay special attention to where you apply h1, h2, h3 tags via paragraph styles. You should probably make the main "Edge Advertising" title the h1 for the page.
There are two primary factors to SEO, indexing and page ranking.
Indexing is about making sure your pages have content that corresponds to what your prospective customer will be searching for. This generally means choosing ~3 search phrases and doing what you can to be sure those phrases and the words in those phrases are used in your site. Your site has quite a bit of live text content, so you're probably doing well but you'll want to think about search phrases and see how well they correspond to words and phrases in your content.
With a single page site you're limited to a single page title and no filename for the HTML file (since it will be index.html), so you'll want to make sure the page title is good and you make good use of h1, h2, h3 tags. You may also want to add alt tags to your images (if you haven't already). And keywords in your metadata.
Page ranking is largely about the number of other sources (websites, twitter, facebook, blogs, etc.) that contain links into your site. If lots of other sites are referring to your site, your page ranking will be higher relative to other sites with similar page content.
Again, given the business name is not unique and many of the other businesses with the same name are likely to offer the same services, it's going to be difficult to differentiate your site to web searchers. You'll want to make sure the geographic location of your business is prominent along with the principals and anything else that may be unique to your business (that also known to web surfers).
Finally, when you make a change to your site, if you submit your sitemap.xml file to Google using Webmaster Tools it theoretically will encourage Google to re-index your site sooner, though there's no guarantees how long it will take.

Built Flash Video and will NOT show in Hosted Environment

Built Flash Video and will NOT show in Hosted Environment.
The files generated work on development machine. I posted the same
files in hosted environment and flash will not show. I first
thought it was Vista 64 IE 7 so I switched to XP IE7 and same
results. Still it is strange the falsh works locally. I am sure it
is something simple that I am missing. Any help would be
appreciated. Thank you.
Stan

Nickels55, I appreciate the response. Here are the
interesting facts. I had my hosting provider apply the mime type
and restart IIS. No flash video. I have Vista x64 Ultimate with I
think IIS 7 (the default IIS that comes with the OS.) The flash
video would not show in that environment until I applied the MIME
and then it WORKED. Yeah! But I still don’t have it working
on my web hosting provider with server Win2003. I thought it was
the hosting provider but I posted on my work server Win 2003 and
changed the MIME with a reset and could not get the video to work
there either.
I would like to try another angle here. Again I am using the
wizard to encode and publish the flash video. Maybe I don’t
have a settings correct. I can approach this a few ways.
1.) I can send my video to someone to post on their Win2003
server and see if they can get it going.
2.) Someone send me a short 3 second video that they produced
that they know it works on Win2003.
3.) Any other ideas? Surely someone in this universe has used
the flash wizard to encode a video and published to a Win2003
server. :)
I guess the other thing to note is when creating the flash
video I chose no controls (play, stop, pause). I want the video to
start when someone accesses the page for the first time.
Thank you for the help everyone.
Stan

Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>../crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>web</param-value>
     </context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.

My older model Apple TV won't connect to iTunes and does not show up in my devices list in iTunes. I have two Apple TVs in my house and I can't imagine that this is part of the problem but I mention it just in case. My other Apple TV is brand new and it connects to iTunes just fine. I've tried most of the "fixes" and one says to Force Sync but I can't since Apple TV isn't in my device list. Another "Fix" said to Navigate the Apple TV to Settings --> Downloads --> Check for Downloads, but when I tried that there was no option for "Downloads" under the Settings Heading. I'm at a loss. Please help. Could this be an issue with too many authorized devices? We have three iPads, two iPhones, laptop, desktop, two Apple TVs, and an iPod and most of them are syncing the same music playlists and whatnot... have I run out of rope?

hi, just posting to everyone in general..its not you, or your apple tv, it is itunes.
ok, ive had the exact same issues for weeks now, as with everyone i had done the lastest upgrade and no longer could see/sync my gen 1 appleTV.........so, i removed the upgrade and went back to the prev version, even though it was showing in my prefs under appleTV, it still wouldnt show in the side panel under devices....i gave up.
This week i was determined to get it to work! So i started from scratch, totally removed itunes and started back with version 9 and upgrade each version from there, i had no luck, ic clicked find appleTvs but it wouldnt....however i just d/l version 9.2.0.61 and BINGO!. No sooner has it opened and up popped the side panel devices list, showing my appleTV..all ready to be synced etc. I immediately panicked of course haha..and set it all up and its working perfectly.
...Only catch now is that this older version will not be compatiable with my iphone, which i do keep music on...seems we cant win. grrrrrrrrrrrrrrrr this will be the same for all the latest apple products.
Apple needs to allow more than one version of itunes per pc OR perhaps they could get their act together and include all of the millions of APPLETV GEN1 owners in there latest upgrading..after all, THEY made the product and THEY do sell the movies/tv shows, perhaps they could stop making all the upgrade all about the music only!......on which i might add why not incluse movies/tv shows in icloud! yet another upgrade that should be included in the APPLETV GERNERATION 1!..yes we do still exist!
at the very least, im happy ive managed to get all my movies etc onto the apple tv, where ill keep them and from now on d/l directly onto my apple tv. I usually d/l to my laptop and then send them to the appletv but while trying to get all this sorted i did a test, i d/l a movie using my appletv hoping it would somehow let itunes "find" it and getting it to show up in my device list, but it didnt work, however it did sync/send the movie to itunes.. so at least i could save a back up copy.
good luck trying, as i said this has been weeks and this is the only solution ive found so far....and going through these forums its obviouse its itunes thats the issue, NOT Our apple tvs.

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

My hard drive icon is gone from desk top and does not show up in spotlight or finder searches!

Hi there
recently my hard drive icon has disappeared from my Macbook Pro (10.7.4) desk top and does not show up in spotlight or finder searches! I have tried several fixes posted online for earlier operating systems with no luck.
Also, when I connect my external hard drive the icon does not appear on the desl top nor in the finder either, making looking for documents impossible.
Help!!!
Thanks in advance!
Marni

In "finder" click "finder" then "preferences" and navigate to the "general" tab.
Select which items you would like to have show on your desktop.

Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination" the installation stalls and does not show any destination disks

I have a Power Mac G4, it has OS 9. Imam trying to upgrade to OS 10.2.3 (Jaguar). It is going smoothly until I get to the "Select Destination" screen. It stalls there and does not show any disks to choose from.
Any ideas?
Thanks. Abe Oliver

Hello Abe,
If it's a Digital Audio or earlier, you need to install a Firmware update first...
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
Power Mac G4
Firmware Update
Download Document No.
Power Mac G4 (Mirrored Drive Doors 2003)
no update needed
Power Mac G4 (FW 800)
no update needed
Power Mac G4 (Mirrored Drive Doors)
no update needed
Power Mac G4 (QuickSilver 2002)
no update needed
Power Mac G4 (QuickSilver)
no update needed
Power Mac G4 (Digital Audio)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (Gigabit Ethernet)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (AGP Graphics)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (PCI Graphics)
no update needed
Power Mac G4 Cube
Power Mac G4 Cube Firmware Update 4.1.9
75129

Fax and scan not showing network contacts

Was bumped from the office Q/A forum
http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/fax-and-scan-not-showing-network-contacts/4bf79dbd-a2cc-4a96-a8cd-bbdb01746a5c
Just going to jump right to it, let me get the picture painted
windows 7 x32 office 2010 (also tested on office 2013
shared contact book from a networked pc
I open the fax and scan click to and/or contact buttons the shared contacts show up just fine
setup and activate an email account Imap/POP
repeat the process and only the outlook contacts show up
remove the email profile and the contact are back
all pc are domained
i have 5 other pc that don't have this issues
4 win7 x64 offices 2013
1 win7 x32 office 2013 (hosting the address contacts)
From what I can find most are having the opposite outcome that the outlook contacts are not showing up.

Hi Sean,
As per the description, I understand that a shared contact book cannot show in Windows Fax and Scan. There is not so much we can do on Office side, I'd suggest you check on Windows client side.
This is the forum to discuss questions and feedback for Microsoft Office client. I would suggest you to post in the forum of
Windows 7 as Windows Fax and Scan is a Windows feature:
https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

BB Z10 BBM Group updates and notifications not showing up in Hub?

BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58.
Any workaround?

vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1933 Downloaded a movie and its not showing up in purchased

I downloaded a movie and its not showing up in the purchased file

It should be in your Library under Movies

All items of delivery is not showing on SNC Web Portal

Hi Experts,
We are facing one strange issue in SNC. I am explaining scenarion in detail.
We have one sales order having 10 line items in R/3 & it is showing correctly on SNC web portal. For that sales order we have delivery with 10 line items ( out of 10 items 4 items having Batch mentioned in delivery) in R/3 but in SNC Web Portal it is showing only 6 Items. Basically whatever the Items having batch is not showing on SNC Web Portal.
I have checked lots of deliveries & all are having same issue. I have checked all the IDOCs, XML messages to XI & then APO having all the line Items of delivery but all items are not showing on SNC Web Portal.
Could you please advice, what it this issue & how can we resolve it?
Thanks in Advance.....
Regards
Sujay

Hi Chandrasekhar,
I checked this note but this doesnot answers my query.
Regards
SV

Vlan and SSID not showing in AP Web Interface

Similar Messages

Maybe you are looking for