VLAN Tagging for VMs created through self service

Experts !
I am evaluating SCVMM 2012 R2 along with HyperV. The aim is to provide a self service portal for each departments so that they can take care of provisioning and management of their VM. Each department will be using a dedicated VLAN which will be in the TRUNK.
I am planning to make a Priviate Cloud for each group.
Group1 - Private Cloud 1 - VLAN101
Group2 - Private Cloud 2 - VLAN 102
How should we enforce the VMs deployed by each group gets the right VLAN tagging based on the VLAN assigned for them?
At this moment, I dont see that self service user or even an ADMIN get an option to assign a specific VLAN while deploying from template.
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

First you create a logical network for each network/VLAN you will use. In the logical network you will specify IP Subnet and VLAN. Then create VM Networks for each logical network.
Then you create logical switch and use appropriate teaming mode. Then create a uplink port profile which will be used with the logical switch to specify what logical networks can connect to the logical switch.
Then you connect the logical switch to the correct NICs on the hyper-v servers and use the uplink port profile.
That´s shortly explained. You might want to read more here: http://blogs.technet.com/b/scvmm/archive/2013/01/08/virtual-networking-in-vmm-2012-sp1.aspx
It´s pretty most the same in SP1.

Similar Messages

ICD Through Self Service

Hi Gurus,
We have a requirement of creating ICD through Self service for secondary assignments. Is this possible requirement??
Can we enter ICD for secondary assignments through the Apps Forms? If yes, Where the eligible options for secondary assignments are stored?
Please help.
Thanks in advance
Raghav

I don't believe there is anything 'out of the box' for self service.
There is definitely the tools in the core product to generate the data required for the P60, see Metalink note 421200.1 for the latest on using XML Publisher.
I've seen one other client do P60 in Emp SSHR and they used bespoke code (OAF) to display data generated by the core product.

Family members through self service

Can anyone please let me know, If there is a seperate screen to enter family members information through self service or is it same as contacts?
Appreciate your time!

Hi Duncan, Yes, i wanted to check if there is any screen other than the contacts one. I may have to personalise the contacts screen to make it more relevant to family details entry.
Thanks for your comments.

PR created through CRM service should have receipient field as blank

Hello All,
We are doing enh for receipient field blank when PR creates through CRM service but when the PR creates by CRM badi we are able to generate this receipient field as blank but it overwrites by STD Bapi in R3
Can anyone tell me how i can make this field blank by any R3 badi/user exit or nay other wayout
Regards
Pratap

>
Paul Clarence wrote:
> Hi all,
>
> Would be grateful for any advice as to what are the steps that should happen with this type of revenue recognition. I have read through the SAP Help documentation but this really describes just the customizing and not the process.
>
> THanks
> Paul
Hi, Paul!
In CR700 materials there is the next explanation: "Service-based revenue recognition (value/quantity contracts with a target quantity) means that the revenue is realized based on an event. Events are releases that are reflected as service orders or service confirmations. Once again, the billing document is posted to an accruals account first and the revenues are transferred to the revenue accounts in a second step."
Hope it helps
wbr
Vladimir

Is it possible to submit a concurrent program through self service res

Hi Gurus,
I have a requirement in which when a user logs in and concurrent program run which basically generates online payslip for an employee.Is it possible to submit the concurrent program with the required parameters through the employee self service responsibility?
I would also like to know if the print option could be made available to see the respective payslips after viewing the output through the self service responsibility screen?
Please post your ideas.
Many thanks
Praznateja

Hi
Many thanks for the reply.I am quite new to Oaf so could you please elaborate on the steps required to build the above mentioned requirement?
My understanding is that
We need build a custom controller having submitRequest() method in the ConcurrentRequest class containing the required parameters by using the code below :
*//Sample Code*
public int submitRequest(
String ProgramApplication ,
String ProgramName ,
String ProgramDescription ,
String StartTime,
boolean SubRequest,
Vector Parameters ) throws RequestSubmissionException
ProgramApplication -Application Short name of application under which the program is registered.
ProgramName - Concurrent Program Name for which the request has to be submitted
ProgramDescription - Concurrent Program Description
StartTime - Time at which the request has to start running.
SubRequest - Set to TRUE if the request is submitted from another running request and has to be treated as a sub request.
Parameters - Parameters of the concurrent Request
Here is the example for calling a concurrent program from a OA framework page.
import oracle.apps.fnd.cp.request.ConcurrentRequest;
import oracle.apps.fnd.framework.server.OADBTransaction;
public int submitCPRequest(Number headerId) {
try {
OADBTransaction tx = (OADBTransaction)getDBTransaction();
java.sql.Connection pConncection = tx.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(pConncection);
String applnName = "PO"; //Application that contains the concurrent program
String cpName = "POXXXX"; //Concurrent program name
String cpDesc = "Concurrent Program Description"; // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(headerId.stringValue());
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, cpDesc, null, false, cpArgs);
tx.commit();
return requestId;
} catch (RequestSubmissionException e) {
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
Please add on if there is something which is missed out
regards
Prazna

Error: Create new Self-Service application with FPM

Hi,
I'm creating a new self-service application using FPM. I ran into this error when launching the application:
[email protected]385c385c
Any help would be much appreciated. Thanks.
- julius

Hi,
According to your error message, it can be caused by the search service application cannot set up a network share for every query component where the crawlers can dump their data.
For troubleshooting your issue, please make sure the Server service in Services.msc is started, and your account is a member of WSS_WPG group and WSS_WPG group has full control permission on C:\Program Files\Microsoft Office Servers\15.0\Data\Office
Server\Applications(if using default locations).
For more information, you can refer to the blog:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/0762de1a-f9df-4a9a-bc7c-5cb26009435f/sharepoint-2010-search-service-application-stuck-in-initializing-status?forum=sharepointadminprevious
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

VLAN tagging for Desktops

I have a test VDI 3.1.1 system set up and I have to say, I'm quite impressed. In about a day, I was able to serve Windows 7 desktops, something we can't do with our current VMware View setup. One apparent limitation I have run into, however, is 802.1q VLAN tagging support for Desktop NICs. I have created a 2-way aggregate on nxge0 and nxge1. The portchannel these are connected to is set up for 802.1q tagging, and Solaris is plumbed with aggr13001 to tag its packets with VLAN 13, for example. However, traffic from Desktops is not so tagged, so its packets go nowhere. Is there any way to define a VLAN for a given Desktop Pool? This is important for us, as we tend to keep server systems on campus-only subnets, while desktops get Internet-routed addresses.
Thanks,
Charles

Aggregation shouldn't have any adverse effect here. You need to configure VDI to use the correct VLANs on a per Pools basis. In the VDI Manager first navigate to the Desktop Provider -> Networks tab and 'Refresh' the networks. This will scan all VirtualBox hosts in the provider for currently plumbed interfaces, each of which will be listed by their subnet.
After all networks are detected navigate to the Pool -> Settings tab and select 'Host Networking' followed by the required subnet(s). The primary subnet listed here is used for RDP connections.

Email notification for user created through reconciliation in OIM

Hi..
I have done the following configurations for email notification when user is created through reconciliation in OIM
Configuring IT Resource
Name     Email Server
     Type      Mail Server
     Authentication     FALSE
     Server Name     *.*.*.*
     Username
     Password
Creating email definition with the following values
Name     Create User Email Notification
     Type     Provisioning Related
     Language     en
     Region     US
     Object Name     Xellerate User
     Process name     Xellerate User
     From     User
     User Login     Xelsysadm
     Subject      User Created
Add Email notification in a new process task with name Notify
Process definition     Xellerate User
     Task     Notify
     Disable Manual Insert     Enable
     Required for Completion     Enable
     Allow Cancellation while Pending     Enable
     Handler Name     tcComplete Task
     Assignment Rule     Default
     Target Type     User
     User     Xelsysadm
     Email name     Create User Email Notification
     Send Email     Enable
     Notification Assignee     Enable
     Email      Create User Email Notification
     Status     Completed
Xelsysadm has a valid email id. Now when I am reconciling any user, two mail notifications are being sent. Not able to know from where these two notifications are being triggered.
Am i suppose to make any changes in the configurations?
Edited by: Amruta Agarwal on Sep 28, 2011 4:21 AM

Sorry re-read your issue again. I believe there are two notifications because you have added your notify task in the process definition and OIM OOTB sends a notification when a user is recon'd. Thus remove your task or disable the OOTB notification. The property is Recon.SEND_NOTIFICATION
HTH,
BB
Edited by: bbagaria on Oct 7, 2011 9:13 AM

Search for pr created through mrp

Dear friends,
Pl explain me how can we search for the pr which is created through mrp in the doc overview of po creation screen?
Thanx & Regards,

Dear Mr. Pratap,
You can see the list of PR generated through MRP by using ME5A, Put the MRP Controller and execute.
Regards,
Manish Jain

Installing OVM X86 3.1.1 with Trunk VLAN tag for ovm management network

Hi Guys
Can anyone help with network config on the OVM server 3.1.1 basically we need to use vlan tags on trunk port... so i have a subnet from following *(Trunk Allowed VLAN XXX)* from which i need to allocate IP for the OVM server component so that the ovm manager can find the OVM server instance...
Can you use vlan tags, on trunk port with OVM server 3.1.1???
Thanks

Your right there as i later found out the engineers weren't selecting the vlan option when installing the vm server...

Changing Road map step name through Self Service administrator

Hi,
My requriement was to change the name of road map step in Enrollment iview from review enrollment to just review.
for this change i went to Self-Service administrator role under which Portal Content>Content Provided by SAP> srvconfig>com.sap.pct.erp.srvconfig.ess.employee_self_service> Benefits>FPM APplications>Benefits Application changed the name in road map and saved it. But the changes are not reflected .Can you tell me what might the reason be?
Thanks
Sushanth

No I dont have Guided Procedure role. I have all other roles which a normal Portal developer and administrator has.
Thanks
Sushanth

Vlan tags for voice

Hi all, can anyone tell me why we untag the vlan for data, but tag for voice when using the same port, does the untagged vlan have to be the same between all trunk ports ?, and also if it is untagged, how does the next switch know what vlan the data has come from ?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Yes, for egress. Ingress is "it depends".
You could also consider using both links for both kinds of traffic.

VLAN Tagging for VDSL (German, T-Home)

Hello,
*does the AirPort Extreme (gigabit edition) support VLAN Tagging?*
I will get VDSL 50/10 Mbits (T-Home Entertain) within the next few days and would like to use the AirPort Extreme (gigabit edition) as a router. VDSL works with VLAN (7) Tagging - NOT PPPoE! Currently the T-Com Speedport W700V (a router) will shipped with the VDSL Modem.
Thank you for your help.
cheers
Chris

Aggregation shouldn't have any adverse effect here. You need to configure VDI to use the correct VLANs on a per Pools basis. In the VDI Manager first navigate to the Desktop Provider -> Networks tab and 'Refresh' the networks. This will scan all VirtualBox hosts in the provider for currently plumbed interfaces, each of which will be listed by their subnet.
After all networks are detected navigate to the Pool -> Settings tab and select 'Host Networking' followed by the required subnet(s). The primary subnet listed here is used for RDP connections.

Number range for document created through transaction MR11

Hi All
I am using transaction MR11(Maintain GR/IR clearing account).I want to know where we configure the number range for the document which gets created on posting through transaction MR11.

HI,
SPRO --> MM -->LIV --> Clearing Account Mainteance --> Maintain Number assignment for Account Maintenance Document --> Maintain Number Range for Account Maintenance Document - Tcode - OMRJ or check in OMR4
Regards
KK
Edited by: Kishore Kumar Galla on Mar 24, 2010 3:30 PM

Change segment name for Idoc created through BDBG transaction

hi all,
I have created a BO thru SWO1 transaction and then have used BDBG. Now for one of the segments in the IDoC which got generated automatically,i would like to change the segment name.This object was completed long time back and hence was released. Now we have been asked to get the segment name changed. But, when i try to click on the change button it says "<b>the object has been generated and hence cannot be changed"</b> Is there an work around for this? Pls reply. Thanx
Regards,
Venkat

Hi,
I have the same error. Did you solve it?
Regards,
Lyda

VLAN Tagging for VMs created through self service

Similar Messages

Maybe you are looking for