Vlookup Multiple column match

Hi ALL~
I want to vlook up match two column A and B..
to another worksheet.
how to do it ?

Thanks for sharing your experience here.
The VLOOKUP array formula should works fine .
=VLOOKUP(A9&B9&F9,IF({1,0},Sheet8!A$2:A$100&Sheet8!B$2:B$100&Sheet8!E$2:E$100,Sheet8!C$2:C$100),2,0)
Press Ctrl+Alt+Enter to input it.
Wind Zhang
TechNet Community Support

Similar Messages

Conditional order by clause with multiple columns

I would like to know whether it is possible to include multiple columns in a conditional order by clause.
Ex: I have written the following PL / SQL :
CREATE PROCEDURE GetProducts
@OrderBy VARCHAR(50),
@Input2 VARCHAR(30)
AS
BEGIN
SET NOCOUNT ON
SELECT Id, ProductName, Description, Price, Quantity
FROM Products
WHERE ProductName LIKE @Input2
ORDER BY
CASE
WHEN @OrderBy = 'ProductNameAsc' THEN ProductName
END ASC,
CASE
WHEN @OrderBy = 'ProductNameDesc' THEN ProductName
END DESC
END
Now I want to include when the Orderby - "Productnameasc" then order by productname, price, stdate
else
orderby productname, crdate, category
Could this be done? I tried it, but couldn't get this to work.
Any help is greatly appreciated.

Since matching ORDER BY columns have different data types (first column for CLERK is sal - number, first column for MANAGER deptno is number but first column for "else" is a string) we need to convert number to string but preserve number sort order. Since DEPTNO is NUMBER(2) we will use TO_CHAR with format 'S00'. Since SAL is NUMBER(7,2) we will use TO_CHAR with format model 'S00000D00'. For EMPNO we will use TO_CHAR with format model 'S0000'.
select deptno,
        empno,
        ename,
        job,
        sal
from emp
order by case job
             when 'CLERK' then to_char(sal,'S00000D00')
             when 'MANAGER' then to_char(deptno,'S00')
             else ename
           end,
           case job
             when 'CLERK' then to_char(deptno,'S00')
             else job
           end,
           case job
             when 'CLERK' then job
             when 'MANAGER' then to_char(empno,'S0000')
           end
    DEPTNO      EMPNO ENAME      JOB              SAL
        20       7369 SMITH      CLERK            800
        30       7900 JAMES      CLERK            950
        20       7876 ADAMS      CLERK           1100
        10       7934 MILLER     CLERK           1300
        10       7782 CLARK      MANAGER         2450
        20       7566 JONES      MANAGER         2975
        30       7698 BLAKE      MANAGER         2850
        30       7499 ALLEN      SALESMAN        1600
        20       7902 FORD       ANALYST         3000
        10       7839 KING       PRESIDENT       5000
        30       7654 MARTIN     SALESMAN        1250
    DEPTNO      EMPNO ENAME      JOB              SAL
        20       7788 SCOTT      ANALYST         3000
        30       7844 TURNER     SALESMAN        1500
        30       7521 WARD       SALESMAN        1250
14 rows selected.
SQL> SY.

Checking multiple columns using "IN"

I have a query
select 1 from tableA
where
cond1 = val1 and
exists
( col1, col2, col3, col4 ) IN
( select
     cola, colb, colc, cold
from
     table B
where
     cond1 = val1
Will this condition Checking for multiple columns in the IN work ?
I actually mispelled a column name ( say colb ) in the sub query but it did not give a error, but executed fine by matching part of the columns alone?

The execution plans look strangely similar.
SQL> CREATE TABLE t1 (c1 INT NOT NULL, c2 INT NOT NULL, c3 INT NOT NULL);
Table created.
SQL> INSERT INTO t1 (c1,c2,c3)
2 SELECT dbms_random.value(0,9)
3       , dbms_random.value(0,99)
4       , dbms_random.value(0,999)
5 FROM   dual CONNECT BY LEVEL <= 10000;
10000 rows created.
SQL> CREATE TABLE t2 AS SELECT * FROM t1 SAMPLE BLOCK(10);
Table created.
SQL> BEGIN
2      DBMS_STATS.GATHER_TABLE_STATS(user,'T1');
3      DBMS_STATS.GATHER_TABLE_STATS(user,'T2');
4 END;
5 /
PL/SQL procedure successfully completed.
SQL> SELECT * FROM t1 WHERE (c1,c2,c3) IN
2         ( SELECT c1,c2,c3 FROM t2 )
3
SQL> @xplan
Plan hash value: 1275841967
| Id | Operation            | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |      |     1 |    18 |    12   (9)| 00:00:01 |
|* 1 | HASH JOIN RIGHT SEMI|      |     1 |    18 |    12   (9)| 00:00:01 |
|   2 |   TABLE ACCESS FULL | T2   |   209 | 1881 |     3   (0)| 00:00:01 |
|   3 |   TABLE ACCESS FULL | T1   | 10000 | 90000 |     8   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - access("C1"="C1" AND "C2"="C2" AND "C3"="C3")
SQL> SELECT * FROM t1 WHERE EXISTS
2         ( SELECT NULL FROM t2
3           WHERE c1 = t1.c1
4           AND    c2 = t1.c2
5           AND    c3 = t1.c3 )
6
SQL> @xplan
Plan hash value: 1275841967
| Id | Operation            | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |      |     1 |    18 |    12   (9)| 00:00:01 |
|* 1 | HASH JOIN RIGHT SEMI|      |     1 |    18 |    12   (9)| 00:00:01 |
|   2 |   TABLE ACCESS FULL | T2   |   209 | 1881 |     3   (0)| 00:00:01 |
|   3 |   TABLE ACCESS FULL | T1   | 10000 | 90000 |     8   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - access("C1"="T1"."C1" AND "C2"="T1"."C2" AND "C3"="T1"."C3")
SQL>

NamedQuery problem- single argument compared to multiple columns

Hello,
I'm not sure if this issue is a bug or if I'm misinterpreting the API. I'm trying to execute a text search query against multiple columns in the same table via EJB 3.0, e.g.
select object(o) from Location o where o.city LIKE :searchString OR o.county LIKE :searchString"So, a single text argument is compared to multiple fields- but I keep getting an exception that the number of supplied arguments (one) does not match the number of required arguments (one- even though it's ID is referenced twice). Is there a separate syntax for repeating arguments in EQL (EJB 3.0, JDeveloper 10.1.3)? Is it not supported?
I get around the issue by just specifying a Query at runtime, but I'd prefer --if possible-- to create a NamedQuery instead.
Any help would be appreciated. Take care.

Should the EJBQL statement be
select object(o) from Location o where o.city LIKE :?1 OR o.county LIKE :?2

JoinRowSet : Multiple Columns as the MatchColumn

Hi All,
RE: JoinRowSet : Multiple Columns as the MatchColumn
I spent one day and have been trying to join two tables with two columns as a JOIN match... cannot made anything work. I read all the doc and the JDBC RowSet Implementations Tutorial doesn't really help a lot.
Any example will be appreciated.
Connection con = DriverManager.getConnection(dbUrl,dbUserId,dbPasswd);
Statement stmt8 = con.createStatement();
ResultSet rs = stmt8.executeQuery("select project_id, bld_id, bld_name from table1");
Statement stmt10 = con.createStatement();
ResultSet rs3 = stmt10.executeQuery("select project_id, bld_id, project_name from table2");
CachedRowSet crs3 = new CachedRowSetImpl();
crs3.populate( rs);
System.out.println("Size of the first cached rowset is:: "+crs3.size());
CachedRowSet crs4 = new CachedRowSetImpl();
rs.beforeFirst();
crs4.populate( rs);
System.out.println("Size of the first cached rowset is:: "+crs4.size());
JoinRowSet jrs = new JoinRowSetImpl();
System.out.println("Adding 1st crs :: "+crs3.size());
int [] idArray = {1,2};
crs3.setMatchColumn(idArray);
jrs.addRowSet(crs3);
crs4.setMatchColumn(idArray);
jrs.addRowSet(crs4);
FileWriter fWriter;
fWriter = new FileWriter("myoutput.xml");
jrs.writeXml(fWriter);
fWriter.flush();
fWriter.close();

I have no idea this is what you are trying but look at this.
String select Statement = "select table1.project_id, table1.bld_id, table1.bld_name, table2.project_name from table1 left join table2 on table1.project_id = table2.project_id and table1.bld_id = table2.bld_id where ... order ...";
Statement stmt8 = con.createStatement();
ResultSet rs = stmt8.executeQuery(select Statement );The joined data is in rs.
rykk

Merge statement - update multiple columns from a single sub-select

Is it possible to write in 10gR2, a MERGE statement, with UPDATE for multiple columns from a single sub_select?
like this:
MERGE INTO tableA
using ( select * from temp) tmp
on( tableA. col1 = tmp.col1)
when matched then
update set ( tableA.col5,
                   tableA.col6,
                   tableA.col7) = ( select sum(col2), sum(col3), sum(col5)
                                                                             from tableX
                                                                            where tableX.col1 = tableA.col1...)

Hi,
The USING clause is not a sub-query, so it can't reference columns from tables that are not in it.
Include tableA in the USING clause if you really need to refer to it there. (It's not obvious that you do.)
As always, it helps if you post:
(1) The version of Oracle (and any other relevant software) you're using
(2) A little sample data (just enough to show what the problem is) from all the relevant tables
(3) The results you want from that data (In the case of a DML statement, such as MERGE, this will be the state of the tables when everything is finished.)
(4) Your best attempt so far (formatted)
(5) The full error message (if any), including line number
Executable SQL statements (like "CREATE TABLE AS ..." or "INSERT ..." statements) are best for (2).
If you can present your problem using commonly available tables (for example, tables in scott schema, or views in the data dictionary), then you can omit (2).
Formatted tabular output is okay for (3).

Split one column value and insert into multiple columns

hi
am new to plsql .
i want to split a characters from one column and insert into multiple columns
i tried used substr function the symbol ',' vary his place dynamically ,so i can't apply substr function.
for eg: before split
col1 :
col2 :
col3 :
col4 :
colu5: adsdf,fgrty,erfth,oiunth,okujt
after split
col1 :adsd
col2 :fgrty
col3 :erfth
col4 :oiunth
col5 : adsdf,fgrty,erfth,oiunth,okujt
can anyone help me
thanks
Edited by: 800324 on Dec 23, 2010 8:28 AM
Edited by: 800324 on Dec 23, 2010 8:36 AM

How about:
SQL> create table t
2 (col1 varchar2(30)
3 ,col2 varchar2(30)
4 ,col3 varchar2(30)
5 ,col4 varchar2(30)
6 ,col5 varchar2(30)
7 );
Table created.
SQL> insert into t (col5) values ('adsdf,fgrty,erfth,oiunth,okujt');
1 row created.
SQL> insert into t (col5) values ('x,y');
1 row created.
SQL> insert into t (col5) values ('a,b,c,d');
1 row created.
SQL> select * from t;
COL1                           COL2                           COL3                           COL4                           COL5
                                                                                                                            adsdf,fgrty,erfth,oiunth,okujt
                                                                                                                            x,y
                                                                                                                            a,b,c,d
3 rows selected.
SQL>
SQL> merge into t a
2 using ( with t1 as ( select col5||',' col5
3                       from   t
4                     )
5          select substr(col5, 1, instr(col5, ',', 1, 1)-1) col1
6          ,      substr(col5, instr(col5, ',', 1, 1)+1, instr(col5, ',', 1, 2)- instr(col5, ',', 1, 1)-1) col2
7          ,      substr(col5, instr(col5, ',', 1, 2)+1, instr(col5, ',', 1, 3)- instr(col5, ',', 1, 2)-1) col3
8          ,      substr(col5, instr(col5, ',', 1, 3)+1, instr(col5, ',', 1, 4)- instr(col5, ',', 1, 3)-1) col4
9          ,      rtrim(col5, ',') col5
10          from   t1
11        ) b
12 on ( a.col5 = b.col5 )
13 when matched then update set a.col1 = b.col1
14                             , a.col2 = b.col2
15                             , a.col3 = b.col3
16                             , a.col4 = b.col4
17 when not matched then insert (a.col1) values (null);
3 rows merged.
SQL> select * from t;
COL1                           COL2                           COL3                           COL4                           COL5
adsdf                          fgrty                          erfth                          oiunth                         adsdf,fgrty,erfth,oiunth,okujt
x                              y                                                                                            x,y
a                              b                              c                              d                              a,b,c,d
3 rows selected.
SQL> Assuming you're on 9i...

Comparison of multiple column values with a single column value

I have two separate tables say Tab1 and Tab2
I want to select some datas , which is common to both the tables.
In tab1 , there is a column 'STATE' and it's value is 'A'
In tab2, there are multiple columns for the state, say STATE_A,STATE_B, STATE_C ETC and a row is present with the following details
STATE_A = 1, STATE_B =1 ,STATE_C =0,STATE_D=1
I need to select STATE when STATE_A ='1',
if my STATE='B', this STATE has to be selected since STATE_B =' 1', similraly
if my STATE='D', this STATE has to be selected since STATE_D =' 1',
If my STATE='C', STATE_C should not get selected since it's '0'.
Is it possible to do this in a single SELECT statement, where I have some other checks also or else how can I achieve it?

Maybe this will help
Select * from STATE_MAS ;
STATE
A
B
D
F
H
Select * from STATE_CHILD
STATE_A STATE_B STATE_C STATE_D STATE_E STATE_F STATE_G STATE_H STATE_I STATE_J
1 0 0 1 1 0 0 0 0 0
CREATE OR REPLACE FUNCTION GET_STATE (P_VAL VARCHAR) RETURN NUMBER IS
V_SQL VARCHAR2(200);
V_COL VARCHAR2(35);
P_RETURN NUMBER ;
BEGIN
V_COL := 'STATE_'||P_VAL;
V_SQL := 'SELECT 1 FROM STATE_CHILD WHERE '||V_COL||' = 1 ';
EXECUTE IMMEDIATE V_SQL INTO P_RETURN ;
RETURN P_RETURN ;
END;
SELECT STATE FROM STATE_MAS
WHERE GET_STATE(STATE) = 1 ;
STATE
A
D

JTextAreaCellRenderer to wrap text in multiple columns... any better way?

I would like to use a basic JTextArea cell renderer to wrap the text in a JTable cell, like in this thread
http://forum.java.sun.com/thread.jspa?threadID=664671&messageID=3893724
Although the technique works, a disadvantage is that it cannot be used "as is" for multiple columns due to the setRowHeight/revalidate issue. One suggested workaround was to keep track of the maximum row height, as described here:
http://www.javaspecialists.co.za/archive/newsletter.do?issue=106
Both seem a bit rough. Are there any other options or more efficient techniques for automatically wrapping text in a JTable cell?

Hello, did you search online? there are many tutorials like this one: http://www.photoshopessentials.com/photoshop-text/text-effects/text-wrap/
You simply create a path, substract the parts you do not need, then click with the text tool inside.
Note that it is not a dynamic text wrap, you need to change it if you move the objects around.

How to link Excel Chart with multiple columns dynamically?

Hi all,
I have one problem. I have an excel chart which has to read data from multiple columns for it's X-axis values (time stamps) and the same number of values for it's Y-axis from multiple columns. See figure attached.
Now, you can do this by manually assigning values by holding control key to tell the chart that data from many columns is continued from the first column. i.e, a long data is distributed along may columns. This is done very easily manually.
Now, how to do it at runtime through LabVIEW 8.0?
Although, I have done it through labview when there where only two columns, A and B streching up to any length. But, now to save space we are dumping into many columns in the same page and want the chart plot that data as we dump it.
It is tough since I don't know how to assign SourceData of the chart through labview.
I have attached chart's SourceData picture.
Hope you all can solve my problem.
The Y-axis values are: =(good!$B$30:$B$70,good!$D$30:$D$70,good!$F$30:$F$70,good!$H$30:$H$70,good!$B$71:$B$140,good!$D$71:$D$140,good!$F$71:$F$140,good!$H$71:$H$140,good!$B$141:$B$189)
good is the name of the file.
The X- axis values are: =(good!$A$30:$A$70,good!$C$30:$C$70,good!$E$30:$E$70,good!$G$30:$G$70,good!$A$71:$A$140,good!$C$71:$C$140,good!$E$71:$E$140,good!$G$71:$G$140,good!$A$141:$A$189)
See the columns vary from A to F.
I have still not got what I love.....
Attachments:
ExcelChart.JPG ‏113 KB
SourceData.JPG ‏34 KB
XY values.JPG ‏36 KB

Ok i solved the excel chart problem. Here is the figure showing my victory! But offcourse with NI forum help.
Message Edited by Halemani on 09-19-2008 06:33 AM
I have still not got what I love.....
Attachments:
Chart_XValues_Values.JPG ‏36 KB

Crystal Report multiple columns

I'm having trouble with Crystal Report's multiple columns in the detail section.
The details section, the multiple columns is checked then the printing direction is across - down. Since the form I am using is a pre-printed form, by estimation it can only allow at best 30 records in one page, that is 15 in the 1st half of the column and another 15 records on the next. For visual:
Invoice No    Invoice Date        invoice total                                               Invoice No    Invoice Date        invoice total
1                                                                                16
2                                                                                17
3                                                                                .
.                                                                                28
14                                                                                29
15                                                                                30
For some reason there is this giant space after the last set of rows before it prints out the page footer. This giant blank section disrupts the layout of the page footer section.
Here are some info on the details section as configuration is involved:
Format with Multiple Columns - checked
In Paging: New Page after 30 visible Records
In Layout: Width: 3.5 in       Height: 0.0 in
                 Horizontal: 0.0 in      Vertical: 0.0 in
Printing Direction: Across-Down
Anyone knows how to suppress it or have the page footer move upwards?
P.S To see actual pre-printed form, please download this [http://www.mediafire.com/i/?csu0q75mjynys2k]
Edited by: Khristine Angelei Basilla on Mar 1, 2012 8:34 AM

Now why didn't I try that out. Actually, initial plan was 2 subreports.
So when I added the second subreport in the group footer section, it only prints the details on the last page, which should not be the case as I need to be printed on all pages.
I'll test it out. I'll post an update soon.
Thanks.

Format on multiple columns issue ...

Post Author: needhelptoo
CA Forum: Formula
I'm having issues with the way the data is displaying.I am using the Format Multiple Columns.I have 3 across set.I have the Down and Across checked.My report with the 3 columns is a custom labels sheet.I need to have the down part always be 8 columns.i can't set that anywhere like the 3 columns across.as the sheet used to print the info are labels and perforated for each label (column)I have the following:1.
Group Header #1 on InvoiceNumber. This have my invoice header
information related to the customer of the invoice. Keep Together
selected.2. Group Header #2 on a formula {@sort}. This is suppressed and as a {@reset} formula in it.3. Details section has {@accum} and section suppressed. Keep Together selected.4. Group Footer #2 as the {@display} formula with Paragraph Formatting. Keep Together selected.5. Group Footer #1 on InvoiceNumber has add'l customer related info for the invoice.so 5 sections in my design view with 2 groups.It'll display the information in InvoiceNumber order in ascending order down first.But the last one on the 1st column is only part of the invoice info and the rest of it starts from the top of the 2nd column.and
then shifts all the columns according to that. Which of course then
does not print on the allotted space of the actual label. part of info
is on one and the rest on another.obviously this won't work. I think i tried everything I can think of and I'm not expert. Barely a novice at this.any help would be appreciated!

Post Author: V361
CA Forum: Formula
In the layout tab, have you tried the Gap between details ?, you should be able to produce a "mailing label type" report using detail size and gap between details...

I am unable to sort multiple columns in a table created in Pages.

I had been using Appleworks up until I installed Lion and have now switched to iWork. I created a table within a Pages document and am able to sort a single column (using the Table Inspector and choosing Sort from Edit Rows and Columns) but the Sort option is grayed out when I attempt to sort multiple columns.
In another post, someone talked about this being a problem if you have merged fields. I do not believe I have done this (to be honest I don't know the function of merging fields).
This is very frustrating as I was easily able to sort these tables in Appleworks.

Sharon Anderson wrote:
Thanks for your quick response! I have been trying that but then found that Numbers would only let me print in landscape view so I had to paste the table back into Pages. Is there a way to print in portrat view (from Numbers?)
Not so. In the lower left corner of the window, there's an icon that looks like a piece of paper. If you see this:
you are in Sheet View, or normal, mode. If you see this:
You are in Print View mode. Now you see the icons for portrait and landscape modes. Click your choice. Then arrange your content to fit the pages as you wish.
Jerry

Master-detail list - how to spread over multiple columns

I am using the master-detail functionality to create a image viewer.
I have a long list of master thumbnails, and rather than having them go down the page in one column, I would like to make them spread over 2 or 3 columns before the detail column.
(example of format I am trying to achieve - http://www.franbainbridgephotography.com.au/gallery.html (I dont mind whether master thumbnails are on right or left of detail photo))
You can see my problem on http://www.wcwra.com/webpages/images.php
Is this possible with the master-detail functionality?
Thank you!

The brilliant David Powers has fixed this for me on the main forum (vw2ureg was v close). David's answer is :
There is no way of making a single dataset repeat in multiple columns, because it's simply one element being repeated over and over.
However, with a little out of the box thinking, you can do it quite easily with thumbnails. Instead of putting the master column repeat region in a block level element, use an inline element, <span>. Images are treated by browsers as inline elements, so this should work just fine. Change the following code from this:
<div spry:region="dsPhotos" class="MasterContainer">
    <div class="MasterColumn" spry:repeat="dsPhotos" spry:setrow="dsPhotos"
    spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">{Caption}</div>
</div>
to this:
<div spry:region="dsPhotos" class="MasterContainer">
    <span class="MasterColumn" spry:repeat="dsPhotos" spry:setrow="dsPhotos"
    spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">{Caption}</span>
</div>
In your CSS, set the width of the MasterColumn class to the width of your thumbnails, and the width of MasterContainer so that it's wide enough to accommodate two or more thumbnails. The thumbnails will flow into the column two or three abreast.

How to use a USER_DATASTORE to index multiple columns in different tables

I would appreciate if somebody can give an example or point to links with examples on how to use USER_DATASTORE on multiple columns in different tables. THe Oracle Text documentation only shows multiple columns in the same table.
Thanks in advance.

I am not sure why your getting the wrong results but you should seriously reconsider the approach your are taking. Using functions like this is very ineffecient and should be avoided at all cost.

Vlookup Multiple column match

Similar Messages

Maybe you are looking for