VLOOKUP to From Another Sheet

I want a VLOOKUP function that all of my sheets will refer to. It needs to be on the first sheet titled "Total Overview" and the table is "Table 4". I have set it up, but when I go to a different sheet and set it up, it gives an F for a 100%. Is there a syntax error?
Here is the formula for cell H12:
=VLOOKUP(H11, Total Overview :: Table 4, 2, 1)
My Table looks like this:
90 A
80 B
70 C
60 D
0 F
BTW I have a screenshot but I don't know how to attach it to my post.

Hi Monica,
I see two errors.
On the table "Write", the following change is needed in H12:
H12: current formula: =VLOOKUP(H11,Total Overview t:: Table 4 :: $A:$B,2,1)
H12: corrected formula: =VLOOKUP(H11,Total Overview:: Table 4 :: $A:$B,2,1)
The second error is a misunderstanding of the meaning of "100%". "100% of a pie" means "one whole pie." In money terms, 100% of 1.00 CHF is 100 centisimi (or centimes, depending on the canton), not 100 CHF.
(Edit: or substitute $1.00 and 100¢ now that I've read your location as well as your username.)
The numbers on your lookup table must have the same meaning as the numbers calculated in column H of the various tables. They don't.
For the values listed in the lookup table and the value in H11 on this table, F is the correct grade.
The score calculated by the formula in H2, =(AVERAGE(B2:G2))/5 is the average of
  5, 5, 5, 5, 5, and 5, divided by 5.
The average of that set of numbers is 5. Divided by 5, the result is 1, which is well below 60.
Correction needed:
Revise the values on the lookup table to
0.9 A
0,8 B
0.7 C
0.6 D
   0 F
or
90% A
80% B
    0 F
OR
Revise the formula in H2 to
=(AVERAGE(B2:G2))*100/5
and format all cells now showing percents as Number rather than as Percentage.
Regards,
Barry
Message was edited by: Barry

Similar Messages

Excel download into a sheet-2by taking formula from another sheet.-1

i hv an internal table itab.which contain 3 fields a,b,c.
a,b are input parameters (int).c = ab.Now i hv to download the values of a,b,c into a excel sheet-2 by <b>taking the formula</b>(c = ab) <b>from another sheet-1</b>.and everytime the new vales of a,b,c should be appended ito the sheet2.
can anybody tell me which fm i shoud use?? or some sample code will be grrr88.
points will be rewarded.

See if these blogs can help you ...
/people/rich.heilman2/blog/2005/09/12/manipulate-excel-with-ole-abap
/people/sap.user72/blog/2006/02/07/downloading-data-into-excel-with-format-options
Not sure if you can do the calculations.
Regards,
Ravi

Unable to import cell data from another sheet in Numbers

Hi. I have a column of cells that I need to import the values of (copy) from one SHEET to another (not a table within same sheet etc).
Recently moved to Numbers from buggy GoogleDocs/Drive. Within that i could =importrange and reference the cells in the other sheets tables.
Failing this, is it possible to allow my customers to view one table within my worksheet, i.e. only have one table viewable and the others not etc?
Thanks in advance. Si

Hi Si,
There are many ways of doing this in Numbers. If you will be sorting your column the function INDEX() could work for you. If you will not be sorting try this:
Click where you want your first cell to move to. Type "="
Navigate to your other sheet and click in the first cell you want to move.
Hit return.
your value should show in your new sheet.
Fill your newly made formula down the rest of the column.
Welcome to Numbers!
quinn

Insert data from another sheet

I have a problem;
I want to be able to create a drop down list on one sheet that references a table on another sheet. The data looks like this;
UNIT
Cost per day
unit a
10
unit b
20
unit c
30
I am hoping to create a Drop-down box on another sheet that lets me select a 'unit', and then places the Cost per day in the cell next to it.
Is this possible within numbers without a huge IF'cell'= formula?
My aim is to be able to use an iPad running Numbers to create instant quotes when onsite with clients, by referencing a data sheet but presenting it nicely.

Yes, VLOOKUP should work nicely for that. Set the formula up on one sheet and complete it by clicking the ranges in the lookup table on the other sheet.
SG

Reference data from another sheet

Hey everybody, I am sorry to post here if it has been previously posted. I am looking to use a conditional format a cell with a value less than 84 to be changed to red. I am using the iPad.
I also need to reference data from another worksheet.
Thanks,
Greg

I had this same issue, I finally figured you you need a space before and after each ::
'MY BUSINESS 2014 EXPENSES - Table 1' :: B242

Reference cell from another sheet

Hello,
I've created income and expenses spreadsheets, within the same file. I would like to create a cell with a formula for INCOME less EXPENSES. I've read through many forums and have tried the following formulas to no avail:
On the income sheet (B65 represents our total income, FYI) I've typed:
=B65-'MY BUSINESS 2014 EXPENSES'::'Table 1'::B242
or
=B65-'Sheet 2'::'Table 1'::B242
or
=B65-('MY BUSINESS 2014 EXPENSES'::'Table 1'::B242)
or
=B65-('Sheet 2'::'Table 1'::B242)
or
=B65-'MY BUSINESS 2014 EXPENSES - Table 1'::B242
Nothing is working. I keep getting the same #REF! error message. What am I doing wrong here?
Thanks in advance!

I had this same issue, I finally figured you you need a space before and after each ::
'MY BUSINESS 2014 EXPENSES - Table 1' :: B242

Autocomplete from another table in another sheet in same file

I found how to get a price to autofill using VLOOKUP. I like it.
Now, I want to be lazier and not need to type in the full item name in the row heading completely & exactly every time. I also don't want to have a drop down menu in every item line in each table unless there is no better alternative. I would like Numbers to autofill from an inventory list (table with quantities, prices, etc.) in another sheet. It seems that I should have been able to find this function explained but my searches were inadequate.
Then, I will want Numbers to automatically update another column in the inventory table with the quantity of that item sold & the amount remaining which will cause calculations for the value remaining & sold in other columns (without changing the original inventory column). It seems to me that the formula may require numbers to search each table in each sheet for the item name in that row and add all sale quantities together. This means that the formulas would be constantly searching which sounds like it could slow things down a bit. So, again, maybe there's a more efficient way of doing this.
Please help me find these efficiency tools. ThankU

Mr. "P" wrote:
I want to copy an entire row from one table in one sheet to another table in another sheet retaining all values and formulas? So that if I make a change in the original sheet it propagates to the other sheet
(1) A change in the original will propagate to the other table if the change is in the 'copied' row.
(2) what you require can't be achieve by a copy process.
It requires the use of external references which are perfectly described in the User Guide (page 122 in the English version).
(3) sure, a reference is a cell's attribute so you will have to enter it in every cell of the row.
When it's done for one row you may use the Fill Down tool which is also described (with quite all you need to use Numbers) in the User Guide.
Yvan KOENIG (from FRANCE vendredi 19 juin 2009 15:53:03)

How can I copy a row from one sheet and paste it in a column in another sheet?

I would like to copy a row of numbers from one sheet and paste it into a column in another sheet. Is it possible to do this with numbers?

Hi Dennis,
Numbers doesn't have a built-in Paste Special > Transpose the way you have in Excel. However, there are ways to do this in Numbers that are not difficult.
Here are two ways:
Approach 1:
Select the row of numbers, and command-c to copy to the system clipboard.
Click on the canvas and command-v to paste, automatically creating a new table.
With that new table still selected, in your menu choose Table > Transpose Rows and Columns.
Select the cells in the transposed table, command-c to copy, click once in a cell of the destination column of your target table, and command-v to paste.
Approach 2: (after a quick installation, very similar to Excel's built-in Paste Special > Transpose)
Download this Copy Transpose Automator Service, and double-click to install (if necessary choosing Open Anyway in System Preferences > Security and Privacy).
Thereafter to use just:
select the row of numbers you want to copy
with the cells still selected, choose Copy Transpose from the Numbers > Services menu
click once in the destination column and command-v to paste the transposed values.
Note that the second approach does not handle cells with formulas, whereas the first approach will.
SG

Move workbook item from one sheet to another

I wonder if anyone else has come across this one...
According to SAP Help it is possible to move workbook design items from one sheet to another (see http://help.sap.com/saphelp_nw70/helpdata/en/54/a493f7256b43698191a2623e5a0532/frameset.htm
which says:
To move a design item, enter different values for the coordinate or both coordinates. To move an item to a different sheet, prefix the values with proper syntax to designate the sheet. To move an item from Sheet1 to Sheet2, for example, enter a value such as Sheet2!$E$5:$G$6.
However, every time I have tried I get program termination. Has anyone else managed to do this, or experienced the error (and even better, solved it!)?
Best regards,
Patrick
PS. I'm still on the lookout for anyone who has completed a satisfactory upgrade of workbooks to version 7... please do get in touch if you have - it might just provide a light at the end of the tunnel!

No answer, but I managed to get it to work in the end (albeit painfully). I would be interested to hear from anyone who is currently working with version 7 workbooks, to understand whether you find it a workable solution. We opted to remain with version 3.5, having spent several months investigation version 7.

How to copy different cells from one sheet to another (automatically)

Dear community,
My question is:
I have a sheet A which contains in a row f.e.
- date
- account name
- amount
I want to find all rows in A with the account name xy and copy each of this rows to another sheet B.
in A (automatically):
1.12.2008 account2 $100,00
2.12.2008 account9 $200,00
5.12.2008 account2 $210,00
7.12.2009 account3 $190,00
I want to see in B all rows with f.e. account2:
1.12.2008 account2 $100,00
5.12.2008 account2 $210,00
Sheet A is filled/changed manually by user, Sheet B shout "follow" automatically.
How can I realize this?
Thank you for ideas
joves

In Tableau 1
column D uses the formula:
=IF(B=Tableau 2 :: $A$1,ROW(),99999)
In Tableau 2
Cell A1 contains the keyword used to select rows
In column A the formula is:
=IF(SMALL(Tableau 1 :: D,ROW()-1)>ROWS(Tableau 1 :: C),"",OFFSET(Tableau 1 :: $A$1,SMALL(Tableau 1 :: D,ROW()-1)-1,0))
In column B the formula is:
=IF(SMALL(Tableau 1 :: D,ROW()-1)>ROWS(Tableau 1 :: C),"",OFFSET(Tableau 1 :: $A$1,SMALL(Tableau 1 :: D,ROW()-1)-1,2))
In fact if you read carefully, it's quite the same than the one in column A.
This is why I used it.
But you may prefer this simpler one:
=IF(A="","",OFFSET(Tableau 1 :: $A$1,SMALL(Tableau 1 :: D,ROW()-1)-1,2))
Yvan KOENIG (from FRANCE jeudi 14 mai 2009 19:40:37)

Transfer from Subtotal in one table to another sheet.

Hi, about a year ago i made a salary application for my production company. This works quite well, but when I supposed to report amounts for each employed to the swedish tax authorities I am still not automatic because I haven't solved how to transfer a subtotal sum to a specific cell in another sheet. I am sure that this has been discussed earlier, but in the searches I have done I can't find a similar question. So if someone has an idea where to look or knows if it is possible.
What I would need is to have a formula like LOOKUP (I guess that is the english formula for looking up references) or similar so that I can identify a Subtotal for a specific class of rows (i.e. salaries for one person).

Thanks for the reply. If I understand you correctly the approach is simple an genial. I am all the time using and thinking within the frame of the elegant sorting functions that you find in the tables. Very easy to use when you need a quick result, though as far as I can see impossible to bring with you. But of course just put the conditions i a Sum.if. Simple!
Thanks.
Leif

Find value from another workbook and input cell value

I'm trying to add the cost of products from one workbook to match with another. Both 'Product' numbers are in both workbooks. I would like to match those product numbers and insert the cost from one workbook to the other. Can anyone help? I've searched and haven't been able to figure this out. Here are some images:
Image of workbook that I want to add the cost to:
Image of workbook I am taking the cost from:

wcousin,
let's get the terminology consistent:
a file contains a document and is stored on your hard drive. You open a file which, when open, presents a document window.
a document contains sheets.
a sheet contains tables, text, media
a table contains cells
a cell contains text, dates, durations, numbers
I cannot tell whether the screenshots you provided are from the same document (file) or not. If they are from different documents then you cannot make references between them. If they are in the same document then you can refer to on sheet from another by using the following...
To refer to a cell in a different sheet and/or table use the format:
<SHEET NAME>::<TABLE NAME>::<CELL RANGE>
for example:
If you have two sheets, each with two tables:
Sheet 1:
- Table 1
- Table 2
Sheet 2:
- Table 1
- Table 2
then you can put a formula in Sheet 1 Table 1 cell A1 like this to get the value from Sheet 2 Table 2 cell A1
Sheet 1 Table 1:
A1=Sheet 2::Table 1::A1
I will try to provide a specific formula for you with the following assumption... THE TWO TABLES ARE IN THE SAME DOCUMENT:
For the table show in the top picture (sheet name "Sales by Class Detail", not sure what the table name is and not sure what cell this is. In the image you posted it is the cell with the triangle in it in column J):
=vlookup(G, Product Service List::<Table Name>::B:E, 3,0)
you will need to fill in the <Table Name>
you can fill this formula down by selecting the cell you just entered the formula in, then hover the cursor over the bottom edge and drag the yelllow fill handle down as needed

Can I use a cell value to reference a table on another sheet?

I'm not sure if this is possible and I have had no luck with searches, here is what I am attempting to do...
On my first sheet I have a number of tables, each holding information on a service. Each table is named to match the service name.
On another sheet I have a list of clients that use these services, with the service name (to match the table name on the first sheet) in a cell in the client's row.
I would like to pull data from one of the cells on the Service table to include it in a concatenate formula in the clients row.
I was hoping to be able to use the value of the cell with the service name in it as part of the formula to reference the service sheet...
For example:
="something"&Services::B2::C6&"something"
Is this possible, or is there a way I can work around the auto corrections that numbers keeps applying?
Cheers

you can construct the text of a cell reference as a string by concatenating information then use the function indirect() to turn the string into a reference.
so you would do something like:
=indirect("something"&Services::B2::C6&"something")
this is assuming that "something"&Services::B2::C6&"something" results in a string that would be a valid reference.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

BAPI for automatic Pr creation witth multiple files from excel sheet

I have written a programm for automatic PR creation with the help of bapi , where its picks data from excel sheet and makes PR .It is picking excel files from one folder(Files) for PR creation and moving to another folder(Files sucess).
now the problem is if Folder (Files) contains one excel sheet ,PR is created fine , but if the Folder(Files) have multiple excel sheet ,its is creating 1st PR right, but next PR's contains all the line item of 1st PR , 2nd PR and so on .can anyone suggest me where is the problem in codes.
types : begin of x_file ,
        key1(10),
        pur_grp(4),
        maktx(40),
        plant(4) ,
        req(10),
        s_qty(13),
        wbs(24),
        gl(10),
        trackno(10),
        supl(4),
        deladd(255).
types : end of x_file .
data : str5 type char10.
data : mm type char2.
data : yyyy type char4.
data : dd type char2.
data : str9 type char10.
data : str6 type char10.
data : month type char2.
data : year type char4.
year = sy-datum+0(4).
month = sy-datum+4(2).
dd = sy-datum+6(2).
yyyy = sy-datum+0(4).
mm = sy-datum+4(2).
dd = sy-datum+6(2).
clear str6 .
clear str5.
concatenate dd'.' month '.' year into str5 .
concatenate yyyy mm dd into str6 .
DATA : file type rlgrap-filename .
data : it_file type table of x_file .
data : wa_file type x_file .
data : it_header type table of x_file .
data : wa_header type x_file .
*& Internal Table For Define Row and Coloum Postion
data: col_start type i value 1 ,
      row_start type i value 2,
      col_end type i value 256 ,
      row_end type i value 65000 .
*& Internal Table For Retrieve Data From Excel
*data: excel_bdcdata like kcde_cells occurs 0 with header line.
*data: excel_bdcdata1 like kcde_cells occurs 0 with header line.
data: excel_bdcdata like ALSMEX_TABLINE occurs 0 with header line.
data: excel_bdcdata1 like ALSMEX_TABLINE occurs 0 with header line.
data: it_index type i.
DATA : IT_INDEX1 TYPE I.
*& Define Field Symbol
field-symbols: <fs> .
data :   bdcdata like bdcdata    occurs 0 with header line.
data :   messtab like bdcmsgcoll occurs 0 with header line.
data : req_items type table of bapiebanc .
data : wa_req_items type bapiebanc .
data : req_acc_asg type table of bapiebkn.
data : wa_req_acc_asg type bapiebkn.
DATA : RETURN LIKE BAPIRETURN OCCURS 0 WITH HEADER LINE .
*data : return type table of     bapireturn.
*data : wa_return type bapireturn .
data : number type ebeln .
*****************************MOVE FILES******************************
data : xsource type string .
data : xdestin type string .
data : destin1 type string .
data : destin2 type string .
DATA : DEST1 TYPE STRING.
DATA : DEST11 TYPE STRING.
DATA : DEST2 TYPE STRING.
DATA : DEST22 TYPE STRING.
data : sou_dir_name like SALFILE-LONGNAME.
data : tar_dir_name like SALFILE-LONGNAME.
data : tar_dir_name1 like SALFILE-LONGNAME.
data : sou_filename like EDI_PATH-PTHNAM .
data : tar_filename like EDI_PATH-PTHNAM .
data : filename1 type string .
data : tar_filename1 like EDI_PATH-PTHNAM .
data : file_itab like SALFLDIR occurs 0 with header line.
data : wa_file_itab like SALFLDIR.
data : file_count type i .
data : dir_count type i.
data : dir_table like sdokpath occurs 0 with header line.
data : file_table like SDOKPATH occurs 0 with header line.
data : wa_file_table like sdokpath.
data : strr type string ,
       str1 type string ,
       str2 type string ,
       str3 type string .
DATA : PA_VAL TYPE CHAR1.
sou_dir_name = 'D:\barcodes\files\'.
tar_dir_name = 'D:\barcodes\files-success\'.
    "success folder.
CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
EXPORTING
    DIRECTORY = sou_dir_name
    FILTER     = '.'
IMPORTING
    FILE_COUNT = file_count
    DIR_COUNT = dir_count
TABLES
    FILE_TABLE = file_table
    DIR_TABLE = dir_table
EXCEPTIONS
    CNTL_ERROR = 1
    OTHERS     = 2.
IF SY-SUBRC <> 0.
ENDIF.
loop at file_table into wa_file_table.
clear : strr , str1 , str2 , str3 .
strr = wa_file_table-PATHNAME .
concatenate sou_dir_name strr into str1 .
concatenate tar_dir_name strr into str2 . " success
concatenate tar_dir_name1 strr into str3 .         " failed
FILE = STR1 .
*start-of-selection.
*& Function For Retrieve Data From Excel
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    filename                      = FILE
    i_begin_col                   = col_start
    i_begin_row                   = row_start
    i_end_col                     = col_end
    i_end_row                     = row_end
tables
    intern                        = excel_bdcdata
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3.
IF sy-subrc NE 0.
WRITE : / 'File Error'.
EXIT.
ENDIF.
loop at excel_bdcdata.
    translate excel_bdcdata to upper case .
    move excel_bdcdata-col to it_index.
    assign component it_index of structure wa_file to <fs> .
    move excel_bdcdata-value to <fs>.
    at end of row.
      append wa_file to it_file .
        clear wa_file.
    endat.
endloop.
sort it_file by key1. "pur_grp maktx plant .
it_header[] = it_file[].
delete adjacent duplicates from it_header comparing key1 pur_grp maktx
plant .
data : h_item(5) type n .
data : h_pack(10) type n .
data : line_no(5) type n .
data : ln_no(5) type n .
loop at it_header into wa_header .
ln_no = 1.
h_item = h_item + 10.
h_pack = h_pack + 1.
wa_req_items-preq_item = h_item .
wa_req_items-doc_type = 'BOM'.
wa_req_items-pur_group = wa_header-pur_grp .
wa_req_items-MATERIAL = wa_header-maktx .
wa_req_items-plant = wa_header-plant .
wa_req_items-pckg_no = h_pack .
wa_req_items-deliv_date = str6 .
wa_req_items-item_cat = '0'.
wa_req_items-acctasscat = 'P'.
*wa_req_items-distrib = '2' .
**wa_req_items-gr_ind = 'X'.
wa_req_items-ir_ind = '2'.
wa_req_items-purch_org = 'TISL' .
wa_req_items-QUANTITY = wa_header-s_qty.
wa_req_items-PREQ_NAME = wa_header-req.
wa_req_items-SUPPL_PLNT = wa_header-supl.
wa_req_items-trackingno = wa_header-trackno.
append wa_req_items to req_items .
clear wa_req_items.
wa_req_acc_asg-preq_item = h_item .
wa_req_acc_asg-g_l_acct = wa_file-gl .
WA_req_acc_asg-wbs_elem = wa_header-wbs .
append wa_req_acc_asg to req_acc_asg .
clear wa_req_acc_asg.
h_pack = h_pack + 1 .
endloop.
clear ln_no .
***BREAK-POINT.
*& BAPI FUNCTION
call function 'BAPI_REQUISITION_CREATE'
importing
   number                               = number
tables
    requisition_items                   = req_items
   requisition_account_assignment       = req_acc_asg
   return                               = return .

Can someone please give me sol........

VLOOKUP to From Another Sheet

Similar Messages

Maybe you are looking for