VM Creation - host name not set

Hi,
I'm creating vm using createVmTemplate api where i assign the hostname in NICConfig
But i see that the given hostname is not set in the vm.
Default hosname - "localhost.localdomain" is seen in the vm.
how to resolve this

Sure is, but it will involve some commandline work. First, you're going to need to install the SDK. You only need the Novacom part of the SDK, but AFAIK there's no seperate download for Windows... you have to get the whole thing. The SDK is available here: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html
Next, you're going to need to enable Developer mode on your TouchPad, here's how to do that:
Start a Just Type search and enter webos20090606
A Developer Mode icon will display, tap it
Tap the toggle switch to turn it On
Leave the password blank and tap Sumbit
Close the Developer Mode app
Now, connect your TouchPad to your computer. Next, you're going to find a file called Novaterm.bat. It's buried in the install directory of the SDK. I don't remember the exact path (I don't use Windows anymore) but it's something like C:\Program Files\Palm SDK\Current\bin (keep digging around for bin folders in the C:\Program Files\Palm SDK path and you'll find it eventually). Doubleclick that to start a nice little terminal app. Choose your TouchPad from the drop down list and click connect.
Now, time for some command line stuff. Run the following commands in the terminal:
mount -o remount,rw /
cd /etc/dhcp
vi dhclient.conf
Press the I key on your keyboard to go into edit mode (this is a Vi specific thing)
Remove the # at the beginning of line 14 and change the andare.fugue.com inside the quotes to whatever you want your TouchPad reporting as. For example: #send host-name "andare.fugue.com"; would become send host-name "RidiusTouchPad";
To save your changes, hit the ESC key (to exit edit mode), then type :wq and hit enter. Note there is a colon in there. Again, this is Vi specific stuff.
sync
mount -o remount,ro /
Once you've done this, disable and re-enable your Wi-Fi and your TouchPad should be reporting a hostname. Kind of a lot of work if you ask me (unless you already have the SDK installed).

Similar Messages

Console message - Domain name not set

Opened console and get "Domain Name not set" message every 10 seconds or so - the anther from .ypbind.
What do I shut off, set or fix?
Thanks.
Tom

I found that deleting the file /etc/domainname fixed the problem. Apparently this file is a leftover from a previous version of OS X.
If you search the Leopard discussions for "ypbind" you will find other solutions, such as disabling ypbind in /System/Library/LaunchDaemons/com.apple.nis.ypbind.
Bill

Host name not derived as FQDN (TH_GET_PLUGIN_INFO )

Hello,
we've got a problem in the CRM web UI, however, I assume it is more related to general BSP settings.
When testing a CRM component ICCMP_HEADER which is a BSP application in the component workbench
(tcode BSP_WD_CMPWB). The browser tells that an exception
CX_BSP_WD_HTTP_RESPONSE_ERROR is thrown in class
CL_BSP_WD_STREAM_LOADER, method LOAD_FROM_URL.
I did some debugging and found out that in this method in line 20,
function module TH_PLUGINS_ACTIVE is called. It returns that both HTTP
and HTTPS are active. Due to this, in line 31 the system calls method
CL_HTTP_CLIENT=>CREATE_BY_DESTINATION. In this method function module
TH_GET_PLUGIN_INFO is called. It returns the host name (uxsapl07)
without FQDN (.mobilkom.at). I tested the function module on our
development system (MSD) and it returns the full hostname
(vssapk08.mobilkom.at).
I've checked the host name buffer in tcode SMICM and it shows only the
hostname (no FQDN). If refreshing the buffer, it gets filled again with
only the hostname.
I've compared settings on productive system MSP with development system
MSD:
parameter: SAPLOCALHOSTFULL
MSP: uxsapl07.mobilkom.at
MSD: vssapk08.mobilkom.at
parameter: icm/host_name_full
MSP: empty
MSD: empty
However, in tcode SMICM --> paramters, both systems show the FQDN for
parameter icm/host_name_full.
I don't know why it works then on MSD and not on MSP.
Many thanks & regards
Wolfgang

parameter: icm/host_name_full
MSP: empty
MSD: empty
try setting the above parameter with the FQDN (RZ10) and restart the ICM
after restart run program RSPARAM to check whether the changes had taken effect
Regards
Raja

Host name not showing up under Active Clients

When I go into my router and check active connections, I can see all host names like "Acer Laptop", "IPhone" etc..., IP and MAC address' that are connected to router. Today, when I was in there looking, I saw an asterisk where host name should be for the TouchPad. (it took me a while to figure out it was the TouchPad) Is there a reason why Host name would not show up?
I have gone into "Device Settings" and set "Name" as "Chucks TouchPad". Is that the host name that should be showing on router?
Thank You for any assistance.
Post relates to: HP TouchPad (WiFi)

Sure is, but it will involve some commandline work. First, you're going to need to install the SDK. You only need the Novacom part of the SDK, but AFAIK there's no seperate download for Windows... you have to get the whole thing. The SDK is available here: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html
Next, you're going to need to enable Developer mode on your TouchPad, here's how to do that:
Start a Just Type search and enter webos20090606
A Developer Mode icon will display, tap it
Tap the toggle switch to turn it On
Leave the password blank and tap Sumbit
Close the Developer Mode app
Now, connect your TouchPad to your computer. Next, you're going to find a file called Novaterm.bat. It's buried in the install directory of the SDK. I don't remember the exact path (I don't use Windows anymore) but it's something like C:\Program Files\Palm SDK\Current\bin (keep digging around for bin folders in the C:\Program Files\Palm SDK path and you'll find it eventually). Doubleclick that to start a nice little terminal app. Choose your TouchPad from the drop down list and click connect.
Now, time for some command line stuff. Run the following commands in the terminal:
mount -o remount,rw /
cd /etc/dhcp
vi dhclient.conf
Press the I key on your keyboard to go into edit mode (this is a Vi specific thing)
Remove the # at the beginning of line 14 and change the andare.fugue.com inside the quotes to whatever you want your TouchPad reporting as. For example: #send host-name "andare.fugue.com"; would become send host-name "RidiusTouchPad";
To save your changes, hit the ESC key (to exit edit mode), then type :wq and hit enter. Note there is a colon in there. Again, this is Vi specific stuff.
sync
mount -o remount,ro /
Once you've done this, disable and re-enable your Wi-Fi and your TouchPad should be reporting a hostname. Kind of a lot of work if you ask me (unless you already have the SDK installed).

Full qualified host name not appearing in url within WSDL generated from PI

Hi
We are on PI711 ( AIX OS ) and are stuck with an issue of the fully qualifed hostname not appearing within WSDL file generated in PI71 for a webservice it exposes using the Integration builder
We changed the host name in exchange profile ( all locations ) from hostname to hostname.companyname.intra and also in the ABAP stack as recommended in all OSS notes.
We use the Integration Directory --> Sender Agreement --> Display WSDL option to generate the WSDL.
Its to be noted that all locations ( including url for WSDL ) have the fully qualified hostname except the url within the WSDL.
Dioes anyone come across this issue/ know which parameters to be updated on the PI server to make the url within the WSDL for the PI webservice to have the fully qualified host name ?

HI Karthik,
As Mentioned by Baskar donu2019t use proposed URL .. while creating WSDL in Id.. but instead provide URL in following format and use it in that place and create WSDL.. details about URL format..
the URL format is fix. and it is simple.
http://host:HTTPPort/XISOAPAdapter/MessagingServlet?channel=party:sendersystem:CC_sender
in above URL provide your sender service component name instead of sender system.
and provide SOAP sender communication channel name in place of CC_sender
provide your PI system host and http name in place of host and https and use this..
for more details about URL..
Propose URL when Configuring Sender SOAP Adpater
soap url
Thanks,
Bhupesh

What is "Host name" in setting up mail accounts

I can't seem to send a message. I keep getting an error message that the connection to the outgoing server failed.
My Incoming Mail Server is "pop-server.tampabay.rr.com" is set up correctly, but
My Outgoing mail is "smtp-server.tampabay.rr.com" and this asks for a "Host Name"
What do I put in for the Host name? There is no hyphen available to set this up as "smtp-server....".
It shows an example of "smtp.example.com", but I don't have anything that is "smtp.tampabay.rr.com". So what do I use?
thanks
Message was edited by: Herschel Hochman

When your typing in the smpt-server click on the icon in the lower left bottom that looks like (@123). This will take you to the alternate key board so that you can enter in the - that you are looking for.

Host name not pinging

Hi All ,
One of the system has been removed from AD and today i was trying to add the system domian and AD and i am succeed,but issue is i am facing now that system is getting IP and i am abble to ping the system from ip but its not pinging from host name ,and
its a laptop so i am unable to synchronize the safe boot
please help me whats need to do

Some issue with DNS.
Run these command and check the results after 15-20 mins:
ipconfig /flushdns
ipconfig /registerdns
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Web Dynpro Application URL Host Name Not Correct

Hello,
I am developing a web dynpro application in our development system but when I activate the application it gets a URL that points to our test system. When I test the application in HTTP Service (SICF) the URL for the development system is passed to the browser. WHere do you maintain the host that is being used to build the URL for the web dynpro application when it is activated.
Thanks,
Jim N.

Hello,
To configure the FQDN (host name full), please take a look at these:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm] and
[http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm].
Regards,

File Name not set when creating new file in EP 6.0 SPS20

Hi,
We recently upgraded from EP6 SP15 to SP20. Now when I create a new file or folder in a KM folder, the name that I give for the resource is not taken into account. The display name of the newly created resource will be New Text or New HTML Document or New Folder, etc. Even if I open the Properties and change it there, it is not getting reflected. But if I select Rename from the Context menu and give a new name, it gets set. What could be the problem?
Thanks in advance
Regards
Ranjith

Hi,
It was an issue with the customized PropertiesControl class.
Regards
Ranjith

How to fix NIS domain name not set after upgrade

I finally updated after thousands of years. As pacman was spewing, I noticed that it moved /etc/conf.d/nisdomainname to .pacsave. Uh, whatever, says I. Must be a package issue. So I just reboot...and of course ypbind can't connect to anything because nisdomainname isn't set.
Just cd to /etc/conf.d and mv nisdomainname.pacsave nisdomainname
Then it will work again.

start here with the knowledge base + FAQ plus forum.
https://communities.vmware.com/community/vmtn/fusion

Email host name for mailbean

Hi, I have a problem about finding my own email host name when I am trying to send an email within JSP. I have tried many names such as: "mail.gmail.com"," yahoo.com", and the one included in the code blow. I think I have a misunderstanding about this host name, could anyone explain for me please? Thanks a lot.
Blow is my code
* Mail.java
* Created on 2006年8月14日, 下午2:59
package myclass;
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.event.*;
import javax.mail.internet.*;
* @author weiming514
public final class MailBean extends Object implements Serializable{
private String to = null;
private String from = null;
private String subject = null;
private String message = null;
public static Properties props = null;
public static Session session = null;
static{
/** Setting Properties for STMP host **/
props = System.getProperties();
props.put("mail.smtp.host", "hostname");
session = Session.getDefaultInstance(props, null);
     /* Setter Methods */
     public void setTo(String to) {
          this.to = to;
     public void setFrom(String from) {
          this.from = from;
     public void setSubject(String subject) {
          this.subject = subject;
     public void setMessage(String message) {
          this.message = message;
/* Sends Email */
public void sendMail() throws Exception{
if(!this.everythingIsSet())
throw new Exception("Could not send email.");
try{
MimeMessage message = new MimeMessage(session);
message.setRecipient(Message.RecipientType.TO, new InternetAddress(this.to));
message.setFrom(new InternetAddress(this.from));
message.setSubject(this.subject);
message.setText(this.message);
Transport.send(message);
catch(MessagingException e){
throw new Exception(e.getMessage());
/* Checks whether all propertises have been set or not */
     private boolean everythingIsSet() {
          if((this.to == null) || (this.from == null) ||
          (this.subject == null) || (this.message == null))
               return false;
          if((this.to.indexOf("@") == -1) ||
               (this.to.indexOf(".") == -1))
               return false;
          if((this.from.indexOf("@") == -1) ||
               (this.from.indexOf(".") == -1))
               return false;
          return true;
Error:
unknown smtp host: hostname

and the one included in the code blow.You have written "hostname" in the code below. Since "hostname" is certainly NOT a valid SMTP host name,
that's why you get the error: unknown smtp host: hostname.
What did you expect? You must provide a valid SMTP host name, NOT "hostname". You see the difference right?
Try with your ISP (Internet Service Provider) SMTP host name.
It should be something like: stmp.somename.com.
That's the one you must set in your email client (Outlook, Thunderbird, Eudora, Lotus Notes, whatever) to send your emails.
Next time please paste your code between [code] tags with the help of the code button just above the edit message area.
Regards

Mail server config inconsistent when host name differs from domain name

Hi,
I've installed Leopard server on host server.example.com but want to server email for example.com the host name for incoming mail should be mx01.example.com. DNS is setup properly resolving server.example.com and mx01.example.com (both forward and reverse, mx01 having a separate IP) and mx01.example.com is set as MX for example.com. Both IPs are routed to the internal server by the firewall.
In Server Admin, server.example.com is set as computer name (also resolved to the proper internal IP by our internal DNS), and in mail settings -> General, domain name is set to example.com and host name to mx01.example.com (so that the mail server identifies itself properly when connected on port 25).
Normal mail traffic works perfectly: Users can send and receive mail from/to addresses like <user_shortname>@example.com. I've got problems with mailing lists, though:
First, group based mailing lists (for groups created in Workgroup Manager) have the wrong addresses: <group_shortname>@server.example.com. Those addresses are linked when you view the croup in Directory.app. You can send mails to eg [email protected] when connecting to the server via telnet on port 25, but get an error email ([email protected]>: mail for server.example.com loops back to myself, Reporting-MTA: mx01.example.com) back.
Second, mailman based mailing lists also have the wrong addresses: <listname>@server.example.com and at the bottom of the mails received from the lists, there are also links to the lists web page with the url mx01.example.com instead of the host's name server.example.com.
mx01 should only be used by incoming SMTP, but if this isn't possible, I could revert to using server.example.com for the MX record as well. But the email addresses should definitely use the domain name and not the full server name as domain part. This is a typical email server setup and I can't understand why leopard server handles this differently. Does anyone have a workaround for this or could tell me how to setup an email system properly?
Thanks a lot in advance!!
Cheers, Thomas

Well, you pointed me into the right direction: Changing the mail server's host name helped a bit. I just dumped the name mx01.example.org. The host is called server.example.org and in mail settings, the domain name is set to example.org while the host name is set to server.example.com. The MX record will have to point to server.example.org, then.
The server now accepts emails to group based mailing lists à la <group_shortname>@example.org. In Directory.app, the link the the group's mailing list still opens a new Mail to <group_shortname>@server.example.org, though.
For mailman based mailing lists, the link to the list's listinfo page in the bottom of emails received from the list is now correctly pointing to server.example.org. The list's address shown there still is <list_name>@server.example.org.

Mail Setup - Domain Name vs. Host Name

I tried to search for this one, but the terms are so common that it made things a little difficult. Anyways, it's a simple question (I think):
My mail service is working fine, however I just noticed that in server admin (under Mail), the domain name is set as mail.mydomain.com and the host name is set to mydomain.com. That's counter to my understanding of what should be in those fields (it should be the reverse, if my understanding of the relevant terms is correct). However, when I tried to switch them I get the following error, albeit only when I try to send mail from one domain hosted on this machine to another domain hosted on the same machine:
mail for mydomain.com loops back to myself.
Any ideas?

You are correct, it should be the other way around.
That said, there is a bug in Server Admin. It will sometimes not correctly references the domain name portion in the mydestination parameter in /etc/postfix/main.cf.
So while it would be a good idea to swap things, you will need to also add the domain name as a local host alias in Server Admin to get mail going again.
HTH,
Alex

Virtual Host Name for CM

Hi ,
R12.1.3 & 11gR2 DB
I have a qucik question . When We have Virtual Host Name for setting , What Should be the node name for ICM in Concurrent Manager Admin form.
In One of our Instance : For ICM & Other Manager , its Virtual Host Name
For Other : ICM : Physical Host Name & Other Manager Virtual Host Name .
Which is good. We having a issue with ICM on both Nodes , in every minutes is going down and come up automatically.
Regards
Sourabh Gupta

Hi Hussein,
Thanks a lot. I have already review these document.
Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? (Doc ID 456540.1)
Adding an Alias Hostname with Oracle E-Business Suite Release 12 (Doc ID 603883.1)
Concurrent Processing - CONC-SM TNS FAIL In Internal Concurrent Manager (ICM) Log File With Virtual Hosts Configuration [ID 961216.1]
ICM Not Starting: Node Name not Registered [ID 602942.1]
I am curious what should be the node name in concurrent manager Administrator form.
W ether is should be the virtual host name or physical host name.
I have just checked with few people , Some Says ICM node name should be Physical server name & Other CM name can be Virtual name. I am not sure on what basis people are saying.
Few says node name should be the physical host for every CM.
Note Sure what is correct & best configuration.
Regards
Sourabh GUpta

HOW TO DEFINE VIRTUAL HOST NAME IN HPIA64 + SAP R/3 ENTERPRISES 4.7

Hi all,
I am trying to install sap r/3 enterprises 4.7 with OS as HP-UX and Database as Oracle in a cluster environment.
In cluster environment sap installation should be done on virtual hostname ( package id ). I'm using the env variable SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
My cluster is running and I'm able to ping it from network, but at the time of SAP Installation my sapinst starts with the physical host name not with the virtual host name.
What can be the solution ..?
Thanks,
Chandresh Pranami.

Hi Chandresh,
Try executing sapinst with virtual hostname.
eg. ./sapinst SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
This should work.
-Pinkle

VM Creation - host name not set

Similar Messages

Maybe you are looking for