Vms - actions
hi,
In VELO, we have done the follwoing actions succesfully
1) CREA (vehile creation)
2) ORD1 (create PO)
However, while trying to perform GORE (Goods Receipt)sytem is giving error saying that action cannot be executed for these vehicles . And the log says Read Conguration.
Did I miss any settings. Pls help.
Regards,
Student
Edited by: STUDENT on Jul 31, 2009 3:06 AM
Hi Student,
it's a bit hard to say for sure what causes the problem without knowing more details but to me it seems quite likely that the vehicle's current status doesn't allow the execution of the action you selected. The fact that action GORE isn't offered when you're on the action tab indicates so.
What I write here is based on this assumption.
You need to check the primary and secondary status of your vehicle in the vehicle details. Then in customizing (transaction OVELO1), check if action GORE is relevant for the primary status, the secondary status or both. In standard, the action is only relevant for the primary status.
You then can check, again in customizing (transaction OVELO11), what are the possible actions for the vehicle and what status is required for action GORE.
In order to be able to execute an action, the action needs to be part of the matrix relevent for the vehicle (in this case, the matrix used as primary matrix, see transaction VELOS, needs to contain action GORE). The old status of in the matrix for action GORE needs to be the same as the current vehicle status.
I hope most of this isn't new to you as this is the "core" of the VMS concept. In order to work with VMS, you need to be familiar with this concept.
Here're links to the documentation, just in case: http://help.sap.com/saphelp_dimp50/helpdata/EN/95/47c83abc3c1a54e10000000a114084/frameset.htm
http://help.sap.com/saphelp_dimp50/helpdata/EN/a1/6dc33ac037b41de10000000a11402f/frameset.htm
As I said, I'm not sure if my interpretation of what causes your problem is correct but what I've described above seems likely to me.
Kind regards,
Steffen
Similar Messages
-
Execute Z* VMS action in DBM (/DBM/VSEARCH)
Hi Gurus,
i have a question to share with all of you, i created an Z* action in VMS so my question is... i want to execute this action in DBM (/DBM/VSEARCH) which configs should i have to do to reuse this acction Z* ?
i already did this config:
the action Z102 is a sales order.
but when i am in /DBM/VSEARCH and i populate the data,i execute but looking in the debugg looks like the program control in DBM lost the data.
thanks for your answersHi Sachin, thanks for answer,
the vehicle is this one
i will take this vehicle and execute Z102 via VMS (tx VELO)
successful
now i will reverse the Z102 and execute with the same customer and sales area via /DBM/VSEARCH
and the result has failed
as you see, there isn't problem with the matrix for my action Z102, i am thinking could be some part on abap code where sales area and customer are losing.
any help it will be apreciated . -
SAP VMS - Standard action CPGM
Hello Experts
As far as I know, standard VMS actions allow me to do "Cross Plant Good Movements" (standard action CPGM). The problem is that this action executes a stock transfer (without creating a stock transport order). I need to create a stock transport order between plants, with condition types, and after that I need to create a delivery and a billing document from company A to company B, in other words, I just need to do in VMS what standard SD-MM intercompany stock process does, but I didn't find any standard way of doing so.
How did you solve it?
I will appreciate your help in this topic.
Thanks in advance for your support.
Best Regards,
IvetteHello Ivette,
there's no standard VMS action available which does what you want out of the box.
So you need to define your own actions for VMS to fulfill your needs. Please refer to note 903913 in order to find out how this is done in general.
If you're lucky, the function modules of existing actions can be reused and you just need to implement BAdIs (to pass on additional or changed parameters to the ERP BAPIs) which are called by such action function modules and you have to call these function modules slightly differently (e. g. using other action document types).
In order to find out if existing action function modules can be reused in this way, I recommend that you examine the function modules of the actions which do things relatively similar to what you need.
If reuse is not possible, you would have to create your own action function modules.
In any case, it won't be pure customizing but will require some ABAP development. Modification of SAP is in my opinion not necessary.
Kind regards,
Steffen -
IS - AUTO VMS Documents required
HI Gurus,
Required a help.
I am working with IS-VMS project.
I am very new to this module.earlier i was working 5 yrs in SAP MM module.
So I Request you all to send me some document related with VMS actions/matrix &
some sample process documents for my understanding purpose.
Thks
Regards,
PerumalpillaiHi, for matrix examples I suggest you to install the best practices (a78 and a79), also take a look to the sap library: http://help.sap.com/saphelp_dimp50/helpdata/En/8d/88c43ace7a3b46e10000000a114084/frameset.htm
Regards.
Pedro -
Dear Experts,
Can anyone help me with my doubt regards SAP solution with VMS.
We have two different companies, one that is responsible of importing the cars and the other one is responsible for accessorizing and some PDI services. In this scenario, we are thinking about using CS for service orders that the second company executes, but we are not sure on how to assign those costs to the individual vehicle, taking in consideration that that stock is part of the first companyu2019s inventory. Is there any way in VMS and CS standard of managing this kind of situations? Any suggestions?
Thanks in advance for your help.Hello Ivette
There are some customer implementation projects where VMS and CS has been used as mentioned in your query.
From VMS, a CS service order can be triggered using the action SMOR. The necessary coding for this action needs to be checked to pass the vehicle related information and project specific requirements to CS. This will ensure that the VMS Vehicle History contains the link to the CS Service Order.
Further when the CS Service Order process is completed, the cost of the vehicle should be updated. In VMS the standard action SMOC allows to set the status of service order as complete.
a) A suggested approach can be create a custom action which uses the SMOC and RVAL. The standard VMS action RVAL can be used to re-valuate the value of the vehicle with the values from service order.
b) Depending on the customeru2019s process flow, another approach can be to check the CS Service Order user-exits for the correct integration point, when CS order is completed to trigger an RVAL action.
Use of the standard VMS BAPI is recommended, so that the validations are performed and correct update of the vehicle history with statuses.
Let us know if the above information was helpful.
Raju -
Is there any standard setting of the shipment, where if I trigger shipment start button, system automatically trigger the vehicle status from available vehicle to vehicle movement is in progress.
Currently we have manually status of the vehicle, and want system automatically set the status plus if vehicle is in movement than the same vehicles sould not be assign to any other shipment, till it will be avaialable.
Regards,
Imranok. let's try:
the availability of a vehicle is changed by a VMS action that is executed.
This is caused by action matrix configuration in the VMS:
IMG -> logistics execution -> VMS -> control data -> define action controls ...
Here, select an action matrix (right side), and then click twice on the field "availability, locations and planned delivery" (left side).
or use transaction OVELO11
Screenshot of an example is attached to this post.
See also the online help:
http://help.sap.com/saphelp_dimp50/helpdata/EN/91/88c43ace7a3b46e10000000a114084/frameset.htm
Note: when definining the action matrices for the availability, make sure that the availability is not unforeseen overwritten by other actions. The best way is to define the availibility only by one matrix, as long as the actions of assigned matrices to the vehicle model don't interfere with each other in regards to the availability.
Hope this helps. Let me know if you need further help.
Best, Ute -
hi
we want to change the Availability Status of vehicle from *Available for Contract to Not In Service*
Can any 1 able to guide how to do it?
Regardsok. let's try:
the availability of a vehicle is changed by a VMS action that is executed.
This is caused by action matrix configuration in the VMS:
IMG -> logistics execution -> VMS -> control data -> define action controls ...
Here, select an action matrix (right side), and then click twice on the field "availability, locations and planned delivery" (left side).
or use transaction OVELO11
Screenshot of an example is attached to this post.
See also the online help:
http://help.sap.com/saphelp_dimp50/helpdata/EN/91/88c43ace7a3b46e10000000a114084/frameset.htm
Note: when definining the action matrices for the availability, make sure that the availability is not unforeseen overwritten by other actions. The best way is to define the availibility only by one matrix, as long as the actions of assigned matrices to the vehicle model don't interfere with each other in regards to the availability.
Hope this helps. Let me know if you need further help.
Best, Ute -
Incoming invoice before goods receipt
Hi friends.
In the standard process of VMS the action for good receipt (GORE) is executed before the action for incoming invoice (INIV). Is there the possibility of doing the way inverse (INIV before GORE). I know that the vehicle belongs to the material type VEHI with valuation category X so it is a single batch. And the batch is created at goods receipt so I'm not quite sure if it is possible to register the incoming invoice previous to the goods receipts.
Thanks.
PedroHi Pedro,
in VMS, the batch is not created when the goods receipt (GORE) is executed. The batch is created at an earlier point of time: It happens during vehicle creation (CREA) already. If you don't create the vehicles via CREA but via CRE1, the batch is not yet created yet but in this case action REAL (which is in this case supposed to be executed prior to ORD1) creates the batch. All this statements are true for the valuation type creation as well.
The VMS actions and the VMS framework in my opinion don't enforce the action sequence GORE->INIV. From a VMS perspective, INIV->GORE is possible as well. Of course you need to set up the action matrices in a way that this is allowed.
It's the standard MM settings which need to be done in a way that INIV->GORE is possible. As far as I know you have to make sure that in the vendor master (view "purchasing data") the "Indicator: GR-Based Invoice Verification"-flag is NOT set. The same flag also exists in the info record (ME12) where it also needs to be removed.
I don't know if further customizing and / or master data settings in MM is required to enable INIV->GORE.
Kind regards,
Steffen -
Issue while creating Vehicel Quotation in SAP DBM
Hi Experts,
I have creted purchase order, Goods Receipt and Incoming invoice for a vehicel through /DBM/VSEARCH transaction.
Now i am tring to create the sales quotion for the same vehicel, It is showing an error like" Vehicle item in order not found ".
After that i tried to execute the VMS action for sales quotation in VELO trasaction, I am getting the error like " No reservation for the Vehicle".
Please let me know what would be the reson for this error. Help me how to resolve this, You are rewarded accordingly.
Thanks,
Nagaprasadreddy Polu.Hi,
Check the customizing settings in DBM:
Ordertype:
SPRO -> Logistics execution -> Dealer Business Managerment -> Order -> Ordertype -> Define Order Type
Standard for vehicle quotation: ordertype 3001 with item category schema VQ
Item type schema
SPRO -> Logistics execution -> Dealer Business Managerment -> Order -> Item Category ->Define Schema for Item Category
Standard item categories for schema VQ:
G2TX Text
P003 Vehicle
P004 Vehicle Features
P005 Vehicle Accessories
P041 Update relevant Vehicle Features
P051 Update relevant Vehicle Accessories
Check also ordertype determination:
SPRO -> Logistics execution -> Dealer Business Managerment -> Order -> Ordertype -> Order Type Schema -> Determination of Order Types
Check also action control in DBM customzing:
SPRO -> Logistics execution -> Dealer Business Managerment -> Order -> Order control -> Define action control
Select criteria table /DBM/OE_EVAC_ENG and assign to event ORD_NEW with control code SD following actions:
VS_ORD_NEW
ITEM_NEW
ORD_PRICING
Regards
Joachim -
Error while executing action SMCO in VMS Build-to-Order process.
Hello All,
When I execute the Action 'SMCO' for service order confirmation, the system says that the action cannot be executed due to the error: "Actual date(s) is in the future (check parameters)". Also the Actual start & End Dates are blank in the service order. This is creating a problem such that the Action 'SMIO'-Create Billing request for service order cannot be executed for completion of the Build-to-Order process.
Is there any customizing setting in ECC - Customer Service (CS) component which is causing this error?
Thanks in Advance,
PramodHI Kaustubh,
Thank you for the response.
The Action matrices I use are ECMM (Primary) and ECSD (Secondary) and the set up is perfect. I was able to do it earlier and we also had a detailed system walkthrough but it seems to be different now may be due to some customizing changes.
It seems to be an issue with the setup in customer service (CS) which is controlling our VMS. I am executing the actions in the sequence SMNO (service notification) then SMOR (service order) and then SMCO (service order confirmation). Now the issue seems to be with service order confirmation where my Actual Start and End dates are blank which should not be the case to confirm the service order (SMCO).
Pleaes let me know if you need more information on this.
Regards,
Pramod
Edited by: Pramod Puttam on Sep 10, 2009 11:25 AM -
Hi Guru's,
I have requirement on SD VMS and Warranty module,
Need to assign/reassign the warranty based on the action of the vehicle which present in VLCHISTORY,
BGMK
BGM1
BGM2
BGM3
Need to create a report program on this requirement, help me with the logic and the proper approch,
1)Grouping the vehicle by comparing the characterstics of the vehicle?
2) How to identify the master warranty?
3) How to assign the warranty to the group of vehicle?
4) How to create a audit report or the error message? (Note: VELO Message class)
Send me the logic or the report program with the screenshot.
Regards,
Lakshmi Narayanan V
+91-9008874969Hi all,
Iam really waiting for someone to see and get the logic right for this code.Iam completely stuck up. i need ur help
Thanks -
Creation of Interlinking Action in VMS
Hello Experts,
I want ro create a interlinking action in VELO tcode( VMS) for creation of used vehicle ( CRUV) and Trade In PO ( POEU ).
Can anyone let me know how do i create this interlinking action in VMS.
Thanks & Regards,
Ravi AswaniHi,
May be in VELOCM ?
Best regards,
Leandro Mengue -
Implement badi for vms isolate action
Dear expert,
I am developing the VMS(vehicle management system) action which is set as "isolate" action.
I use badi for isolate action to perform execution logic (like update ztable and populate some value to VMS table).
but the problem is, the history of vehicle, status of vehicle and green light at navigation pannel is not updated even the message display successful.
Do I need to put some FM call after execute logic within this isolate badi?
Can some give me some sample?
Thank a lot.
Regards,
BoonsomHi Tim,
You can execute a method call in Action definition.
This method call is a badi implementation.
Badi: EXEC_METHODCALL_PPF
In this method call you can trigger your external interface.
Steps:
1) Implement badi EXEC_METHODCALL_PPF to create you method implementation from which you will trigger your external interface
2) Create an action definition in Action profile, in third level configuration for action profile, specifiy Method Call and assign the badi implemented method here.
3) Schedule the action condition.
Thats all.
Test the Scenario.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
Experts !
Error (23317)
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Recommended Action
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
Appreciate any help !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.comHello,
that is a VMM issue.
If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
Until MS got it fixed, you could use the workaround from system center central:
http://www.systemcentercentral.com/tag/shared-vhdx/
This posting is provided >AS IS< with no warranties. -
Error in creating windows 8.1 VMs from templates
hello experts,
I have created a template on Windows 8.1 on SCVMM 2012 R2 (OS:Windows Server 2012) ,Now am try to create a Windows 8.1 VM on another Hyper-v Host where Windows Server 2012 r2 is installed but creation has got failed with error in job list :
Error (2915)
The Windows Remote Management (WS-Management) service cannot process the request. The object was not found on the server (hyper-v host name .com).
WinRM: URL: [http://hyper-v host name.com:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Scvmm_EthernetSwitchPortInternalSettingData?InstanceID=Microsoft:Definition\1f59a509-a6ba-4aba-8504-b29d542d44bb\Default]
Unknown error (0x80338000)
Recommended Action
Ensure that the VMM agent is installed and running. If the error persists, restart the virtualization server (hypr-v host name.com) and then try the operation again.
This error can also happen due to an older version of the VMM agent on the virtualization server. Ensure that the VMM agent is upgraded to the latest version, and then try the operation again.
please help me to resolved the issues and use created windows 8.1 templates for deploy VMs on Windows server 2012 r2 Hyper-V host.
Regards
Richa KMI am running with an idea here that the key is here: Scvmm_EthernetSwitchPortInternalSettingData
Your virtual port profile. You are defining a setting that does not exist. (I am guessing at this since the only thing is an error message).
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.
Maybe you are looking for
-
My Macbook won't go to the login screen and the Lion OS-X is stuck in disc drive
I can't get my mac in safe mode I just circle slash screens or question folder. How can at least get to safe mode
-
I forgot my lockscreen password how can i recover it?
i forgot my lockscreen password for my iphone 4s, What do i do to recover it and access my phone again?
-
MacBook Pro Retina hangs while opening mounted share or USB drive
I have a Macbook Pro Retina that I just updated to 10.8.2 over the past weekend. Now, when I try to open a mounted SMB share or USB drive, the system hangs completely! I had the system set to auto-reconnect my network shares, so when this started h
-
Field Group Layout Generation Error
Hi Experts, I have Created a custom field group using Tr EEWB. now i want to do PCUI customization. I Have created custom field group and Field Group Structure in tr CRMC_BLUEPRINT_C. now when i am going to create layout for the field group msg comin
-
Can I modulize this code?
I brought a project in from Flash cat and from working on it, the projecthas grown to 1181 lines of code. Modulization is important in any software development project how ever the projet was 900 line sof cod eto begin with. I see a lot of <fx:Design