VMS Configuration - Vehicle creation
HI,
I am very new to VMS. Infact, I want to learn VMS.
Hw do we create vehilces in VMS
Pls Help..
Regards,
Edited by: STUDENT on Aug 28, 2008 4:08 PM
Edited by: STUDENT on Aug 28, 2008 4:27 PM
hi
/DBM/VMODEL u2013 Create Model Master
On the Display Vehicle Model Master screen, click Create
On the Create Vehicle Model Master, fill in Model Sales Code and Model Service Code
Fill in Vehicle Type
Fill in Model Text 1
Fill in Vehicle Vendor
Fill in Material
Click Save
/DBM/VMODEL - Change Model Master
On the Display Vehicle Model Master screen, fill in Model Catalog
Review list of Model Sales Codes
Click on a Model Sales Code
On the Display Vehicle Model Master XX XX screen, click Display < > Change to switch to Change mode
On the Change Vehicle Model Master XX XXX screen, any fields in white can be changed or additional data can be entered
Make any necessary changes as needed
Click Save,
/DBM/VM - Create Vehicle
On the Vehicle New Entry screen,
Vehicle Business Transact:
Describes the vehicle in terms of the business process carried out
When vehicles are created (action QCRE), for example, the system distinguishes between the following business processes:
u2022 New vehicle
u2022 Used vehicle
u2022 Customer vehicle
OEM
Branch
Model Sales Code
Indicates the key that identifies the vehicle model from a sales perspective.
VIN
Unique Identification number, that the OEM assigns the vehicle.
Similar Messages
-
Configuring vehicle + options in a Leasing contract
Hello gurus,
I'm dealing with an Leasing project for vehicles.
Has anyone dealed with configuring vehicles + options of the vehicle to include them in a Quotation/Contract?
Thank you!
JuditHi Judit,
This scenario is specific to ur business process but its not generic.
Any tangible or intangible services or products or material are created as PRODUCTs or SERVICE PRODUCTS in SAP CRM .
Just follow the below approach ....
Create Vehicles ( PRODUCTS) in CRM systems with different Hierarchies and Categories.
Then you can have ur own attributes sets for each vehicle category like options what u r talking abt..
Then finally once these PRODUCTS in ur terms vehicles are created in the system, you can assign these Vehicles to diff services like Contracts or Quotations.
Siva -
hi
IS there any cookbook or config manual on VMS ?
how is differ from DBM ? if all senarios are possibel by VMS then why cant VMS OVER DBM?
kaustubhHello Kaustubh,
yes, there are some cookbooks for the configuration and extension of the VMS available. What do you want to know? Indeed, the easiest way is to start with the help.sap.com source, and dig also for some SAP notes (there are indeed cookbooks to find).
Your question on how VMS differs from DBM is easy. DBM is an addon on top of ECC 6.0 and makes use of the VMS. The VMS is the Vehicle Management System and this name says it all: it manages vehicles. The DBM uses the vehicle object and some actions of the VMS. DBM adds order processing functionality (to express it in a very general way).
What do you mean with "VMS over DBM"?
You may can see VMS from a component or application perspective, than VMS provides an object, the vehicle, actions to manage the sale and purchase of vehicles (these actions can call ECC 6.0 function modules to create eg. an SD sales order), a comprehensive search functionaliyt, some personalization and other nice features.
If you see VMS from a solution perspective, than this "module" is for the use by OEMs and importers to manage their vehicle supply chain.
Dealers - who repair and sell vehicles - are interested in efficient order management - what comes with the DBM order engine. The DBM makes use of the vehicle object and action concept as available in the module VMS.
For the combination of both business scenarios - retail and wholesales/vehicle import - pls. see the SAP note 941633.
Does this help?
Best,
Ute -
BizTalk Runtime configuration error - "Creation of Adapter FILE Configuration Store entries failed"
Hi,
I am trying to install Biztalk Server 2006 R2 on a Vista Ultimate
edition machine. I completed the installation successfully, and have
configured "Enterprise SSO" and "Group" features. I am getting the
following error while configuring the BizTalk Runtime feature.
"Creation of Adapter FILE Configuration Store entries failed.
The SSO system is currently disabled."
I have already done/tried the following:
1. I tried different settings - Inprocess only, Inprocess and
isolated, each trusted, each with a regular user account and each with
an administrator user account. In all cases I get the same error.
2. I have made the changes suggested here (related to rpc
authentication changes after Windows XP SP2) but it still doesnt
change anything: http://blogs.msdn.com/scottwoo/archive/2004/05/19/135453.aspx
Any suggestions?
Thanks in advance,
AnandI'm having a similar installation error on an XP SP2 box and was getting the same error message (Creation of Adapter FILE Configuration Store entries failed. The SSO system is currently disabled.). I checked and the Enterprise SSO application is not appearing in the list of services, and doing a command line "net start ENTSSO" returns an invalid service error.
So going on the theory that SSO did not install correctly and get registered as a server, I went ahead and uninstalled BizTalk/SSO, blew away BTS/SSO databases, and tried to reinstall (selected all options for install).
After BizTalk installed, I entered a local admin account and chose "Custom" installation. Because the error message pointed at an SSO problem, I tried to apply the SSO configuration ONLY, using the default SSO Administrator/Affiliate Administrator accounts with the default admin account, but it keeps failiing at the same point in the install log when it tries to start SSO (see log below).
[10:30:51 AM Info ConfigHelper] Creating service: ENTSSO, start type: 2, exe: "C:\Program Files\Common Files\Enterprise Single Sign-On\ENTSSO.exe", dependencies: RPCSS,COMSysApp,MSSQLSERVER, account: .\bizservice
[10:30:51 AM Info ConfigHelper] bizservice is a local entity.
[10:30:52 AM Info ConfigHelper] Created service: ENTSSO
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7370) CSSOServerCfg::ConfigureSCP
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7445) NetScheduleJobAdd: nRc = 00000000, dwJobId = 1
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5697) CSSOServerCfg:tartService
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5721) The SSO service is starting.
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5852) ENTER: CSSOServerCfg::WaitServiceState
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is starting (SERVICE_START_PENDING)
[10:30:53 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is not running (SERVICE_STOPPED)
The SSO database does get created, but the SSO Administrators and SSO Affiliate Administrators local groups do not.
So my theory here is that for some reason SSO cannot start, the exception is caught and the app rolls back.
Any ideas? -
Dear Experts,
I have ECC PO and as of now user creates manual sales order in other R/3 4.7 which is time consuming, less accurate and erroneous process. I got to know something on ALE configuration where user creates PO in ECC, automatically SO created in R/3. Basically, i have two separate server ECC and R/3. pl share ALE configuration steps of to create SO in other R/3 system from PO of ECC system. Pl also share any other processes to be followed to achieve automation of SO creation into other SAP system from PO.Hi,
Check the transaction code VOE2 which suits your requirement to create the SO from PO with ALE
In that transaction code you have to maintain the combination of Customer , vendor and sales area details
After that set up the partner profiles in the transaction code WE20 with the Partner type LS from ECC to R/3 with relevant message types and IDOC types
Please let the Developer know these details and he would be able to create the Partner profile
revert back if you need further details
regards,
santosh -
how to create the sales order in VMS for a vehicle that i have created I tried to go to action and executed
but sales order is not creating
are there any additional settings in configurationhi
Check the setting
Assign sales organization u2013 distribution channel u2013 plant : OVX6
Enterprise Structure ® Assignment ® Sales and Distribution ® Assign sales organization u2013 distribution channel u2013 plant
Regards -
Short Dump in Component Configuration during creation
Hi ,
While creating component configuration ,i am getting a message as:
The following error text was processed in the system E12 : Screen output without connection to user.
The error occurred on the application server ecc12_E12_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSKEY
Function: DEVELOPER_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_COMP_CONFIG_CONTEXT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: CREATE_CONFIG_CONTEXT of program /1BCWDY/IB48HP1E9RW91UCEZDMS==CP
Method: RUN of program /1BCWDY/IB48HP1E9RW91UCEZDMS==CP
Method: IWCI_IWD_CONFIGURE_COMPONENT~RUN of program /1BCWDY/IB48HP1E9RW91UCEZDMS==CP
Method: EDIT_COMPONENT of program /1BCWDY/FB00EOBCHT1AUXABNS6J==CP
Method: IF_COMPONENTCONTROLLER~EDIT_COMPONENT of program /1BCWDY/FB00EOBCHT1AUXABNS6J==CP
Can any one suggest the cause of the same
Regards
Akshathi,
try refering the help
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
FYI ,for ur general administration data : name of the configuration, description of the text ,name of the associated component,
collection assignment ,original language ,user name of the creator and date created ,changed by/on.
u2022Explicit configuration data :
The availability of a configuration controller in the component is a prerequisite.
On the left side there is a hierarchical list of available context nodes with associated elements, whereby each element can have attributes. The number of elements and the attribute values can be changed. The number of elements can only be changed if the nodes have been defined with 0..1, 0..n or 1..n.
u2022Implicit Configuration data :
On the left is a hierarchical list of views and the UI elements located in them. Next to this on the right are the changeable properties of each UI element selected on the left.
rgds,
amit -
2811 IOS IPS VMS Configuration
I have several already deployed 2811 that I'd like to turn on the IPS feature. IOS firewall is already running. We also have just deployed VMS. Is there any order that need to be followed to get these into VMS. Should I import them into Router MC or IDS MC first? IDS MC documentation isnt clear to me setting up IOS IPS.
thanks in advanceNo particular order (that I am aware of).
As far as Security Monitor to monitor IDS Alerts, I choose the hard way and just manually added each of our devices, tedious but all is working.
As far as Performance Monitor, I imported from RME
The bulk of our routers run 12.3(11)T and 12.3(11)T2.
We have a ton of 831's and I choose for them to send alerts via PostOffice rather than waiting for collections via SDEE because the memory in the 831's (48MB) are already just about maxed out (Regularly over 80%) just running the daily needed applications (VPN and CBAC). We have some 1700s and 2600s out in the field too that are not as taxed.
if you choose the PostOffice route (or test it out) then here are the commands and steps you need:
First add the device in Security Monitor to use PostOffice
then from the router console, ssh, etc........
ip ips notify nr-director
ip ips po max-events 100
ip ips po remote hostid [VMS Host ID#] orgid [ORG #] rmtaddress [VMS IP Address] localaddress [Router IP Address] port 45000
ip ips po local hostid [Router Host ID#] orgid [Org ID#]
exit
write mem
reload
Once you reload it will send an initial packet to VMS and the router will register as 'Connected' in Sec Monitor.
You should make sure that the 'ip ips po' commands are accepted in your IOS version
I don't know what your memory consumption is like in your 2800 Router but the config for SDEE Event Collection is much less involved. If your router has resources to spare this is the way to go. -
Hi Experts:
We are implementing SAP VMS and using BAPI BAPI_VEHICLE_CREATE, but I have some concerns about its usings:
We are not able to choose a VEHICLE PRIMARY OR SECONDARY STATUS with this BAPI, it determines the status defined in customizing. Is there any way to do it? What if I have many different status to determine in vehicles I migrate?
It is impossible to assign a storage location for a vehicle. It is a problem for example for vehicles already received but not sold (It doesnu2019t allow to create a delivery without a storage location in VMS)
It is impossible to assign a customer for a vehicle (for example for vehicles reserved).
My concern is that I would have to replicate all our business processes until the correct status for the specific vehicle, or there is a way to do it without executing all the actions, just for initial load of vehicles in SAP.
Thanks in advance for your help,
Best regards,
IvetteAdjust your conversion approach.
If you are unable to load your vehicles with the correct pri & sec status, subsequent to vehicle creation you can use transaction VELOE to manually adjust the status per vehicle or group of selected vehicles. perhaps you can call the program behind this transaction within your conversion process to meet your requirement?
When you load your vehicle records, there is no finacial or quantive impact in Inventory Management - hence there is no stock to be recorded in a storage location (as a Sloc is an IM element). When you process action IEID to load your initial vehicle stock in IM you can supply the storage location which is used in the resultant 501 goods movement receipt.
Hope this helps,
Nigel Ross -
Auto creation of Stor Location and Batch during stock upload via MI09
Hi Experts!
Please guide me to configure automatic creation of storage location and batch during stock count through mi09. Eg : I got material A in storage location 1000 and got batch 123 for this material. Then when i want to do the stock count, if i enter the storage location 2000 and batch 122 for this material, then system will auto create this storage location and batch in the master data.
I tried to configure it in OMJJ for storage location but it is not working. Please anyone guide me step by step how to configure it. Storage location and Batch.
Thanks.
Crystal.hi
check this
Create Storage Location Automatically
In this step, you specify whether the automatic creation of storage location data is allowed for goods issues and transfer postings.
This is advisable if you work with negative stocks and a material's first movement may be an outward movement.
Note that the reversal movement for a goods issue, for example, movement type 202 or 262, is not considered as an issue but as a receipt. If you only use the automatic creation of storage location data for reversals of goods issues, you do not have to allow negative stocks.
You have to allow automatic creation per plant first of all. You then have to explicitly allow the creation of storage location data for each movement type.
The storage location data is only created if the quantity is posted to 'standard' storage location stock. It is not created for receipts into a special stock (for example, into sales order stock).
Default settings
The standard system is set in such a way that the storage location data is created automatically for all types of receipts (goods receipt with/ without reference, stock transfers, intial entry of stock balances, reversal of goods issues, etc.).
Activities
1. Enter for each plant whether the automatic creation of storage location data is generally allowed.
2. Specify the movement types for which storage location data is created automatically. -
Automatic creation of Transfer order for Picking and putaway
Hello All .
I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery) .
thanks
RahulHi
To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
You can find more details on this link
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Thanks & Regards
Kishore -
Creation of New RMS ID in Dispute management
Hi Team ,
Requirement is My client wanted to use 3 custom RMS ID apart from SAP Standard RMS ID .so we need to create new custom RMS ID .
Can any one help me by giving the step by step configuration of Creation of New RMS ID .and what other configuration we need to do after creation of RMS ID .
Thanks in advance .
Regards,
ManojHi Minu,
Simply follow SAP help as below;
SPRO > "Create RMS ID"
Activities
You can use the RMS unmodified or create your own RMS. To create your own RMS, proceed as follows:
1. Choose S_AREA_CMG.
2. Choose S_AREA_CMG -> RMS_ID.
3. In the context menu, choose Create Parameter Value.
4. Enter the parameter value and the short description.
BR, -
VMs won't start after updates and reboot.
I need some help.
I installed the November 2014 MS updates last night. I installed them on my lab Hyper-V box. The Hyper-V box is joined to a domain but is not a domain controller. It is Server 2012R2 with Hyper-V with all previous patches applied. I had two VMs configured
on the box. The VMs were a 2012R2 server and a Windows 8.1 box. Both were running fine. In fact I shut them down before I did the Microsoft Updates on the server.
The issue I describe below was not present until I did the updates and rebooted. The server and the associated VMs had been running fine for months. These updates are the ones that my SUS server provided to this server.
After I rebooted the server I could not restart either VM. I kept getting the same error that is listed below. I tried DELETING the VM from Hyper-V manager and then building a new VM and using the old vhdx. Again NO LUCK. I even tried CREATING a new VM and
I got the same problem.
(Additional Note: I appeared as though I was able to delete the VM from Hyper-V Manager. Hyper-V Manager displayed 'Destroying....' for some period of time and then the VM was removed from Hyper-V Manager. However, recreating the VM did not solve the problem.)
Each time I get the following error displayed on screen.
'Unnamed VM' could not intiialize.
An attempt to read or update virtual machine configuration failed
'Unnamed VM' could not initialize (Virtual Machine ID)
'Unnamed VM' could not read or update virtual machine configuration: Ran out of memory (0x8007000E) Virtual machine ID B9xxxxxxxxxxxx
=======================
I adjusted permissions on the C:\ProgramData\Microsoft\Windows\Hyper-V folder. Opened it up to "Authenticated Users" based on a couple of TechNet articles that I found. NO luck
In the Hyper-V Config log I get the following entry,
The configuration store at'' is not accessible Unspecified error(0x80004005)
==========================
I also had these errors in the Windows Application log.
ID=1000 Source=Application Error Type=1 Message=Faulting application name: vmwp.exe, version: 6.3.9600.17334, time stamp: 0x5407c751
Faulting module name: vsconfig.dll, version: 6.3.9600.16384, time stamp: 0x5215db66Exception code: 0xc0000194
Fault offset: 0x000000000001966c
Faulting process id: 0xb84
Faulting application start time: 0x01cffe274d55ea6b
Faulting application path: C:\Windows\System32\vmwp.exe
Faulting module path: C:\Windows\System32\vsconfig.dll
Report Id: d4210450-6a1a-11e4-80d6-0019b9eed814
Faulting package full name:
Faulting package-relative application ID:OK,,so I solved this issue by removing the Hyper-V role and then readding the role. The permissions of C:\Programdata\Microsoft\Windows\Hyper-V
and C:\Users\Public\Documents\Hyper-V definetly changed
as a result of re-adding the role.
All required updates (as supplied by WSUS) are applied also. -
Hi
When I run the "Startup/Running Out of sync" report, all my device are out of sync. I went in my router in CLI and I found that some lines of my code are not written the same way in my running-config that in my startup-config. This is why VMS determine that all my router are out of sync.
Is it possible to exclude code of my router in the VMS configuration database ?
Thank you very muchThank you very much, this is what I was looking for and it works properly.
But the problem is that my line code are related with crypto Global section.
Here's the lines that are not the same in my running that in my startup :
***Running***
crypto pki certificate chain [truspoint name]
certificate [certificate ID]
3DAC8C03 F89B2EEB 35D622D0 1DCC8C53
F89F2ECB 35D797D0 1DC09C03 F89F2FFB
35D197B0 ...
***Startup***
crypto pki certificate chain [truspoint name]
certificate [certificate ID] nvram:[truspoint name]#[ID].cer
Each of my spokes have a different certificate so if I want to exclude some line code, I must do it for each certificate :(.
Can I exclude a section of RME database
ex.: "Crypto-Crypto Global"
Thank you very much for your help -
Azure Load Balancer - Query for VMs in rotation or removed from rotationq
From what I can tell, there is no way to know if any of the VMs configured as part of a Load-Balanced Set has been taken out of rotation. I see a PS script to set the Azure Load Balancer Endpoint -
Set-AzureLoadBalancedEndpoint. But there is no way from what I can tell via
PS or in the Portal to notify or alert me when a VM is no longer part of the LB Set due to some issue. What is the roadmap to make this available via a PS Script, Azure Portal, or via SCOM?Hi,
From my experience, this issue was more related with Windows Azure network, I suggest you move to that forum for a better help.
The forum link was:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesVirtualNetwork
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Using Keynote remotely via a WebConference
Does anyone know of a process in which one can create a Keynote that is presented live in front of an audience, along with being filmed during the presentation and allow remote users to view both the video of the presenter and the live Keynote screen
-
SAP 2007 upgrade - does not allow to change old documents
We have recently upgrade to SAP 2007 from SAP 2005 and now it does not allow to change any of the old documents which was already in the system before upgrading. Error message Another user modified table [Message 131-183] It gives the same error even
-
I just bought a macbook pro. But I got Lion instead of Moutain Lion. I tried to upgrade it in the app store, but it requires me to purchase it first. I thought that I suppose to get mountain lion straight away. How can I upgrade it for free?
-
Illustrator CS3: how to join two lines
I have to join these blue lines. I need to get a figure like two red lines below. How can I do?
-
Clean install my imac intel based machine
Hi folks, I'm needing to replace the hard drive and clean install my intel based imac 17" (early 2006) machine and have only the osx 10.4 disk. Do i need another disk to begin this? I am rather new to this machine (I guess you could say newbie) Anyon