VMWare issue?
I have been running a MacBook Pro with OSX 10.5.8. I needed to use it with Windows XP (SP2) running an old Risograph RP 3700 printer through a USB to RISO PARALLEL PORT cable (called Prolific Technology Inc IEEE 1284 Controller) running under the VMWare Fusion environment (a simulator) - it all worked very smoothly.
I now have Windows 7, 64 bit, and Windows 7, 32 bit, and XP SP3 all running happily (only one at a time!) in the updated VMWare Fusion environment.
I still want to print to the older printer (Risograph RP 3700) which I have to use regularly, but I now have a MacBook Pro running 10.7.2 (Lion) with updated VMWare (64 bit) running on it when required.
Using the same cable (prolific IEEE 1284), the RISO WON'T PRINT FROM the new Mac in XP (now SP3). The IEEE 1284 cable is recognised immediately, but as a printer. However, the Riso isn't recognised through it, being the only way to connect the printer to the computer, and which worked so well before.
ANY CHANCE anyone knows what I can do to get the Riso to print from the new computer arrangement??? OR what I am not doing that I should be, or doing that I shouldn't be??
I have done all I understand to do and I am completely foxed.
Simonfromtiverton
I really don't think it is a VMware problem or a problem that you are now running XP SP3, instead of SP2.
I think it is more a XP/printer driver issue or that for some reason the USB ports on the MBP are not being totally recognized by the virtual machine.
Have you installed the VMware Tools? You could try reinstalling them.
Check the VM settings and one thing I always do is set the network into bride mode. That for me actually ties the VM to the host OS better.
Similar Messages
-
OES on VMWARE issue, disabled CPU
This has happened twice in as many weeks. We have a 4 node OES Cluster doing file shares. The server goes offline and the only mention in the VMWARE side is an event that states "The CPU has been disabled by the guest operating system" . If you reboot the machine, it acts like it has a 386 processor and no ram until you reboot it again. Then it functions normally. The only thing is /var/log/messages is normal traffic until the start up messages start to show.
anyone else run into this?
thanks
dave g.OES11 SP2 patched to March 2015, with the PTF for the 128 character limit issue
VMWare Esx 5.1
OS and NSS disk is Fiber Attached SAN
as stated, nothing in /var/log/messages indicating anything is wrong
Host was showing >50% cpu and ram available when issue happened
Originally Posted by smflood
On 29/04/2015 15:06, dbgallo wrote:
> This has happened twice in as many weeks. We have a 4 node OES Cluster
> doing file shares. The server goes offline and the only mention in the
> VMWARE side is an event that states "The CPU has been disabled by the
> guest operating system" . If you reboot the machine, it acts like it
> has a 386 processor and no ram until you reboot it again. Then it
> functions normally. The only thing is /var/log/messages is normal
> traffic until the start up messages start to show.
>
> anyone else run into this?
Versions and patch levels? Novell OES, VMware product, etc.
HTH.
Simon
Novell/NetIQ Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks. -
Hello,
I have two BE6000 servers which come with pre-built 10.5 CUCM, Unity Connection etc. machines.
The servers shipped with CIMC 2.0(1b) and VMware 5.1.
I upgraded these to CIMC 2.0(3d)1 and VMware 5.5 using Cisco'c custom ISO image ESXi-5.5.0-1746018-Custom-Cisco-5.5.1.3.iso
Everything seemed to work ok but now when I try to power on a VM that I have created the console just stays blank.
I have tried various bootable ISO's but nothing is ever shown on the console. The vSphere client reports that the machine has been powered on ok.
This happens on both BE6000 servers.
Reading the VMware forums I can see people mentioning a similar issue with VMware 5.5 but it should have been fixed in version 5.5 U1 which is the version included in the custom Cisco ISO I used for the upgrade.
I am connecting directly to the servers using the client - not via vCenter - and there is no firewall in between my PC and the servers.
Has anyone else seen this and did you find a fix?
ThanksI managed to get the console to work by disabling the local firewall on the machine which was running the vSphere client.
Pretty strange considering it working fine with VMware 4.1, 5.0 and 5.1!
Hope this helps someone else who encounters the same issue. -
I am running a Windows 2003 server with 2 Redat vmware guests. All 3 servers have static IP addresses and the guests are bridged. Static IP addresses are necessary due to the software I am using. Every once in a while when I reboot the Redhat guests, they totally lose the router. By that I mean they cannot access my network. They can ping each other but not any other machine on the network or the internet. No other machine can ping them either. Both guests are using eth0 and all firewalls internally are disabled except for the router, a wrt400n. It's annoying because the solution is to reboot the router and then everything is hunky dory again.
I am not a networking genius by any stretch of the imagination but consider myself competentish at basic troubleshooting. That's just so any answers aren't too full of technical jeeby weebies that woosh straight over my head. Looking through the Admin Console I can see in the Basic Setup you can "reserve" IP addresses in the DHCP Reservation panel to specific MAC addresses.If that is the solution, what is the client name? One of the servernames for example is oracle11g.xxxxx.com which is too long to fit into that box.
Some thoughts would be appreciated.
Thanks in advance.
Message Edited by spartan2 on 03-05-2010 03:53 PMWhich IP, subnet, gateway, dns did you configure for static IP.
What is the DHCP server address pool on the your router?
Which router do you use? See label underneath for exact model and hardware version. Also post firmware version.
For DHCP reservation only enter host name, not FQDN. It's for internal purposes only. -
11g on VMWare Not Starting Service, ORA-12560 etc.
It's obvious that my Listener is up and running but that the Oracle Service never got started. I'm using a VMware instance of Win2003 Server with Oracle 11g on it.
I'm having very similar issues to the person that wrote this:
http://www.dbasupport.com/forums/showthread.php?t=50051
ORA-12560 at service startup *** ( protocol adapter error )
I'm working on a VMware instance, and I'm not trying to connect from another machine, so I don't think I'll need a 'tnsnames.ora'.
I did review my listener.ora and sqlnet.ora
and I did adjust my hosts file (on this Win2003 Server, vmware instance), adding an entry to resolve local host and also the FQ machine name to 127.0.0.1
This I was unsure about since when I ping the FQ machine name (property of My Computer) I get a unique ip address.
There's also the VMware issues of what Ethernet connection setting to use: Bridged, NAT or Host Only.
I've tried to look at logs and config files: connection, startup, trace log, etc.
Set tracing on and saw some errors in the trace, but not sure about how to go about debugging those.
It's apparent that I'll need to start the Database with oradim or a version specific command, oradimxx but I wasn't sure what to use for my -pfile parameter, or how to create orainit.ora or configure that file.
One last thing: Previously my program group for 11g had 'Enterprise Manager' which brought up the webpage and showed that the database was up, uptime and other stats. Now that menu link has disappeared.
Any suggestions on all of these issues ? TIA.Yeah , of course Oracle offers his own hypervisor... that's one very powerful reason.
Please provide us with proper references to support your statements, we all will appreciate that.
Regards
Ignacio
[http://oracledisect.blogspot.com]
Edited by: Ignacio Ruiz on Sep 4, 2008 8:20 PM
I've found the answer on Metalink Note 249212.1, which basically says that Oracle doesn't certifies any product on any VMWare virtualization products, however Oracle will support the product isolating the relationship among operating system and the Oracle product, to known issues or not known issues BUT not related to the existence of an hypervisor layer (VMWare in this case, and distinct of Oracle VM).
In other words, if you have an issue where a certified OS+Oracle product is running over a VMWare product, you'll be lucky if the error is replicated without the VMWare product, otherwise it will be an issue induced from the hypervisor layer, therefore the hypervisor provider must solve.
Anybody interested will follow similar proceedings with another VM products like Virtuozzo (Note 412431.1), Xen (Note 417770.1), this clearly shows a commercial strategy...not technical barriers. -
VMware Tools now broken with gcc 5.1.0 upgrade
This is more of a VMware Tools problem I believe as the community currently has to "patch" the vmware-tools-distro.pl script manually to get it to compile vmhgfs (which is used for file sharing between host and the Arch guest). I am starting a thread here to document any resolve, which currently there is none...
Around April 28th, the Arch linux kernel was compiled with gcc 5.1.0, even though gcc 4.9 was in the repository. This started the problems with vmware tools install:
https://bbs.archlinux.org/viewtopic.php?id=196915
I was able to resolve it by recompiling the kernel using the gcc 4.9 on the system. All attempts at upgrading gcc to 5.1.0 failed, because as I was able to build the tools using gcc 5.1.0, the VM was lockup when trying to enable the kernel modules for vmware. Both on script install, and during reboot.
Today I've upgraded my system and found gcc 5.1.0 upgraded.
I switched back to using the core kernel (compiled with gcc 5.1.0) and allowed gcc 5.1.0 to be installed. I rebooted and got a panic from the vmhgfs not being able to run, and was dumped to emergency mode. (Do note that I have vmhgfs in my fstab, this is most likely why it failed on boot)
So, I went into vmware-tools-distro, my patched version (see link above), and attempted to rebuild the vmware tools under the kernel compiled with gcc 5.1.0 and with gcc 5.1.0. Yay, it found gcc binary this time - the 5.1.0 version.
Unfortunately, the same previous 5.1.0 errors exists:
* during vmware-tools-install.pl, it won't compile vmhgfs with errors of functions not found. needs to be patched (vmware issue, ignore)
* during vmware-tools-install.pl again with patched script, it compiles just fine.
* but during the Kernel Modules enabling portion, the system hangs / freezes / halts. Hard reset is only resolve.
* on system boot, system hangs / freezes / halts on vmhgfs initialization.
Only current resolves are:
* Do not use file sharing (not an option)
* Install gcc 4.9 and recompile your kernel (I already have one, so i am using it)
This is obviously not a long term solution.I have switched to the Open VM Tools, the public domain versions, and am running into exactly the same "vmhgfs" problem: system panics/hangs/locks when trying to mount the share.
I posted a bug report over in VMware... But considering they haven't even fixed the build issues with VMware Tools in 7 months (dev says he has fixed it, but it's not released yet), I seriously doubt that gcc 5.1.0 will get any attention before the next year.
Guess I may be going back to VirtualBox after all. But the 3D acceleration sucks in that, as well as disk I/O. -
VMware - I cannot logon to Windows 7 after upgrade to Yosemite
After upgrading to Yosemite, I cannot logon to Windows under VMware Fusion 7.0. It was working fine prior to the upgrade. The message I get when logging onto Window is,
"The User Profile Service service failed the logon.
The User profile cannot be loaded."
I'm running on a Mac Pro Mid 2010 and Yosemite itself is otherwise working fine. VMware was not running during the upgrade and re-start of the Mac. I'm stuck and need to get this resolved any help is appreciated.I found the solution, I would have found it much earlier but just too tired and stressed from the week I guess
Anyway it is NOT a Yosemite or even VMware issue, it figures it's just a good old Windows issue that dates back to at least 2010, why am I not surprised. Probably as Windows was booting up and giving me the logon it was running anti-virus in the background and the user profile was corrupted, which means that Windows as usual was also not displaying a precise error message, just one that was close enough for Microsoft work.
The solution is easy especially if you can handle booting to Safe Mode and using Regedit, easier still if you have two user profiles in Windows even if one is just a duplicate of emergency uses, say like this. The details can be found here, http://support.microsoft.com/kb/947215
I was up and running within two minutes. Whew. -
Hello,
I have downloaded the Oracle/VMWare/SuSE and have exercised the databases, etc. However, I would now like to take this to the next step and create a 'sibling' virtual machine - which I would just make as a copy of the first and have the instances O10G1 and O10G2 on each of the two virtual machines, respectively. Finally, I would then like to create a shared storage device between the two virtual machines. I have had great difficulty doing this and have found disagreement on other forums whether this is even possible with vmware 4.5. The most promising post I found: ( http://www.vmware.com/community/thread.jspa?forumID=19&threadID=11257&messageID=109257#109257 ) references a document from Oracle Japan ( http://otndnld.oracle.co.jp/products/database/oracle10g/pdf/RAC_Config_VMWareLinux.pdf ). Is this document also on the Oracle USA site? It seems to have the answers I am seeking. If not, can you offer any guidance?
Thanks!
Brandon MooreThe kit provided is not ment to be used in this way, your request for help is outside the scope of this forum.
It's a bit complicated to do what you want. I would simply suggest you use NFS or iscsi on external storage that would eliminate any VMware issues with shared storage.
good luck.
Saar. -
Anybody have experience with Flex in VMWare environment.
I have a flex 3 application that is in our users startup folder and loads (IE 10) when our computers log in to our network. The desktops exist in a VMWare view virtual environment. On startup the application fails to load, and in the address bar the path to the application is prepended with:
"res://ieframe.dll/acr_error.htm#"
At that point clicking the home button reloads the page and it show fine.
I realize this is likely a VMWare issue but was hoping someone in the Flex community might have a clue as to what might be causing this.The Internet hook up should have been performed by the DirectTV installer. There is a specific procedure for this involving the Whole Home equipment.
It would probably be best to have a DirectTV installer hook this up for you, but the Direct TV help forums might be able to provide you with a step by step procedure.
http://forums.directv.com/
A note of caution...the Whole Home setup is not supported over a wireless connection. There's just not enough bandwidth available over a wireless connection to provide reliable high definition video performance. The DirectTV installer will not hook up the Internet connection unless it is hard wired back to your main router using an Ethernet or special Co-Ax connection. -
Cisco Custom ISO - VMWare ESXi 5.5 Upd 2 - VMware Update Manager still showing Update 2 Required
Hello All,
I just updated one of my hosts with the latest cisco image provided on vmware's site (Vmware-ESXi-5.5.0-2068190-custom-Cisco-5.5.2.3). After applying it as a host upgrade and then doing a scan against the host in update manager, it shows that ESXi Complete Update 2 is missing???
I know this may be more of a vmware issue, but wanted to see if anyone had run into this?I ended up getting a vmware ticket opened. Turns out that the patch description was no that great and it was bug fixes for 5.5 Upd 2. We verified 110% that it was correctly updated. Update manager could not be so vague sometimes.
Thanks for the reply. -
Hi ,I am from Azerbaijan ,asking question about internet problem in Server 2008 ,actually there are same problems mentioned before ,but none of them is same as mine.I have testserver HP proliant,I want to test and practise all Exchange ,TMG and etc in
this server ,I am trying to create my own small network ,I installed Vware 10 in Server (OS is Win 7) ,then in Vware I installed Win 7 and Server 2008 R2,server has 2 NICs.I plugged the cable one of them ,now in the server there is internet
,but my target is accessing internet from inside ,from Vware (server 2008 and it's clients ).I installed AD ,DHCP (172.20.1.2-172.20.1.40)and DNS server ,when deploying AD it asked me assign one IP adress,I manually configured 172.20.1.5 ,and gave
8.8.8.8 and 8.8.4.4 DNS adress ,and I disabled other NIC .I tried all versions but couldnt access to internet .I tried mainly about NAT ,also in windows 7 client when I choose Network adapter VMnet2(NAT) it access to internet ,but I think my adress differs
from mine, It is long story ,I will appreciate it ) thank you very much :)Hi,
Actually, it’ a VMware issue. You can post here:
http://www.vmware.com/support.html
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change
without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
And some tips for you:
Since you want to configure windows server as a DC, you should never give it two NIC. A multi-homed DC is really problematic.
And the DC should has its own DNS, if you assign an open DNS, the internal domain name will not be resolved. For external name resolution you can specify a forwarder. -
Non root user can delete root files, bug?
We're having an odd permissions based problem on Solaris 10 u5 x86_64, (new install, fully patched as of 2 days ago) It means that non root users can delete root owned files, which is something I've never seen before, and I've been doing this for almost 10 years.
We're installing into an 80Gb container on VMware ESX server 3.0.1. The OS takes 20Gb (2 processors, 4Gb memory, 8Gb swap) most of the remaining 60Gb is being used as both file systems and raw devices under disksuite as soft partitions. It's one of the file systems, /apps (where we plan to install sybase) that is giving us "issues"
Essentially:
# more /etc/vfstab |grep apps
/dev/md/dsk/d0 /dev/md/rdsk/d0 /apps ufs 2 yes -
# newfs -v /dev/md/rdsk/d0
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d0 last mounted as /apps
newfs: construct a new file system /dev/md/rdsk/d0: (y/n)? y
mkfs -F ufs /dev/md/rdsk/d0 20971520 -1 -1 8192 1024 264 1 546 8192 t 0 -1 8 7 n
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
Warning: 4096 sector(s) in last cylinder unallocated
/dev/md/rdsk/d0: 20971520 sectors in 3414 cylinders of 48 tracks, 128 sectors
10240.0MB in 214 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
20055584, 20154016, 20252448, 20350880, 20449312, 20547744, 20646176,
20744608, 20843040, 20941472
# mount /apps
# ls -al /apps
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm *
rm: lost+found is a directory
sol10% rm -rf *
rm: cannot read directory lost+found: Permission denied
sol10% ls -al
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
sol10% exit
sol10% logout
# chgrp sybase /apps
# chmod g+w /apps
# ls -ald /apps
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 /apps
# ls -al /apps
total 20
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm -rf *
sol10% ls -al
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
sol10% id
uid=***(sybase) gid=***(sybase)
sol10% exit
sol10% logout
# pwd
# ls -ald /apps
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 /apps
# ls -al /apps
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
It's a new "bare metal" (in as much as there is no metal) install. I created the sybase user from scratch by hand editing passwd, group and shadow, buy copying and pasting the data out of the NIS maps. All I've done besides the install & patch is setup networking manually, and created the metadb's and the soft partitions and the mount points & newfs'ed & mounted three of them . I then changed ownership of /apps to be sybase:sybase, and handed it to the database team for the sybase install. they came back and said "should we be able to do this?" as they habitually run rm rf * knowing they can't delete root owned files, only now they can... This is true even if I just chgrp the directory and give them group write permissions. They can still delete anything owned by root, even if it doesn't have group permissions just like the lost+found directory. No other "real" machine we have, x86 or SPARC does this, but we've never installed u5 before either.
As you can imagine losing the lost+found directory is a bit of a problem, however what's really worrying me is if they can do that, what happens when they run sybase as the sybase user? If it borks can they trash the OS and write/overwrite random files?
It's a VM, so in as much that's not a problem, but the reason it's a VM is somebody wants to send a VM to a client as a demo, and at present it's highly unstable IMO.
Does anyone have any idea where to start? My thoughts are that it may be a VMware issue, (though the hardware and the guest OS is supported) it could be a bug, because I've never seen that weird newfs error before, and then I found this:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6622243
Or it could be me, and the fact that I'm hand configuring it, and u5 now requires I do it "properly" with useradd, etc. I'd like to test, but the guy wants it built, and wants it now, so I patched it up, and gave it back to the database team and told them to be careful.
I'd be interested in you opinions regardless.
The full spec of the "machine" is below, sol10 is not it's name for obvious reasons, and I've hashed out the ID & GIUD for similar reasons.
# uname -a
SunOS sol10 5.10 Generic_127128-11 i86pc i386 i86pc
# prtdiag
System Configuration: VMware, Inc. VMware Virtual Platform
BIOS Configuration: Phoenix Technologies LTD 6.00 09/06/2007
==== Processor Sockets ====================================
Version Location Tag
Pentium(R) Pro CPU socket #0
Pentium(R) Pro CPU socket #1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
DRAM in use 0 RAM slot #0 RAM slot #0
DRAM in use 0 RAM slot #1 RAM slot #1
DRAM in use 0 RAM slot #2 RAM slot #2
DRAM in use 0 RAM slot #3 RAM slot #3
==== On-Board Devices =====================================
VMware SVGA II
ES1371
==== Upgradeable Slots ====================================
ID Status Type Description
0 unknown ISA ISA Slot J8
0 unknown ISA ISA Slot J9
0 unknown ISA ISA Slot J10
1 in use PCI PCI Slot J11
2 in use PCI PCI Slot J12
3 in use PCI PCI Slot J13
4 available PCI PCI Slot J14
# dmesg
Wednesday, 10 September 2008 15:33:35 BST
Sep 10 10:17:44 sol10 busra: [ID 490441 kern.info] NOTICE: ndi_ra_free: bad free, dip ffffffff803807a8, resource type memory
Sep 10 10:17:44 sol10 busra: [ID 883242 kern.info] NOTICE: ndi_ra_free: freeing base 0xe0000, len 0x4000 overlaps with existing resource base 0x0, len 0xf4000000
Sep 10 10:17:44 sol10 rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] pci0 is /pci@0,0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 Rev. 1 LSI, Inc. 1030 found.
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci1000,30 (mpt) instance 0 vector 0x11 ioapic 0x2 intin 0x11 is bound to cpu 0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0 Firmware version v0.0.0.0 (?)
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0: IOC Operational.
Sep 10 10:17:44 sol10 pci: [ID 370704 kern.info] PCI-device: pci1000,30@10, mpt0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mpt0 is /pci@0,0/pci1000,30@10
Sep 10 10:17:44 sol10 scsi: [ID 193665 kern.info] sd0 at mpt0: target 0 lun 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci1000,30@10/sd@0,0
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /pci@0,0/pci1000,30@10/sd@0,0 (sd0) online
Sep 10 10:17:44 sol10 unix: [ID 190185 kern.info] SMBIOS v2.31 loaded (1695 bytes)
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /cpus (cpunex0) online
Sep 10 10:17:44 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dld0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 1
Sep 10 10:17:44 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 1
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: keyboard@0, kb8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] kb80420 is /isa/i8042@1,60/keyboard@0
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: mouse@1, mouse8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mouse80420 is /isa/i8042@1,60/mouse@1
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 557827 kern.info] cpu1 initialization complete - online
Sep 10 10:17:47 sol10 rootnex: [ID 349649 kern.info] iscsi0 at root
Sep 10 10:17:47 sol10 genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Sep 10 10:17:52 sol10 genunix: [ID 454863 kern.info] dump on /dev/dsk/c1t0d0s1 size 8197 MB
Sep 10 10:17:53 sol10 pci: [ID 370704 kern.info] PCI-device: pci8086,7191@1, pci_pci0
Sep 10 10:17:53 sol10 genunix: [ID 936769 kern.info] pci_pci0 is /pci@0,0/pci8086,7191@1
Sep 10 10:17:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:17:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:17:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:17:54 sol10 pseudo: [ID 129642 kern.info] pseudo-device: zfs0
Sep 10 10:17:54 sol10 genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: power0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] power0 is /pseudo/power@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:17:56 sol10 rootnex: [ID 349649 kern.info] xsvc0 at root
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] xsvc0 is /xsvc
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] pseudo1 is /pseudo/zconsnex@1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
Sep 10 10:17:56 sol10 genunix: [ID 640982 kern.info] ATAPI device at targ 0, lun 0 lastlun 0x0
Sep 10 10:17:56 sol10 genunix: [ID 846691 kern.info] model VMware Virtual IDE CDROM Drive
Sep 10 10:17:56 sol10 genunix: [ID 479077 kern.info] ATA/ATAPI-4 supported, majver 0x1e minver 0x17
Sep 10 10:17:56 sol10 pci: [ID 370704 kern.info] PCI-device: ide@0, ata0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ata0 is /pci@0,0/pci-ide@7,1/ide@0
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 scsi: [ID 193665 kern.info] sd1 at ata0: target 0 lun 0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci-ide@7,1/ide@0/sd@0,0
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: fdc (fdc) instance 0 vector 0x6 ioapic 0x2 intin 0x6 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: fdc0
Sep 10 10:17:56 sol10 fdc: [ID 114370 kern.info] fd0 at fdc0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] fd0 is /isa/fdc@1,3f0/fd@0,0
Sep 10 10:17:56 sol10 genunix: [ID 314293 kern.info] device pciclass,030000@f(display#0) keeps up device sd@0,0(sd#1), but the latter is not power managed
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fasttrap0 is /pseudo/fasttrap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pool0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
Sep 10 10:17:57 sol10 ipf: [ID 774698 kern.info] IP Filter: v4.1.9, running.
Sep 10 10:18:05 sol10 nfs4cbd[395]: [ID 867284 daemon.notice] nfsv4 cannot determine local hostname binding for transport tcp - delegations will not be available on this transport
Sep 10 10:18:10 sol10 sendmail[598]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:10 sol10 sendmail[600]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:17 sol10 mac: [ID 736570 kern.info] NOTICE: e1000g0 unregistered
Sep 10 10:19:10 sol10 sendmail[598]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:19:10 sol10 sendmail[600]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:20:10 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:20:10 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:24:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:24:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:24:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:24:59 sol10 e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[0] : Adapter 1000Mbps full duplex copper link is up.
Sep 10 10:28:21 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:35:17 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 11:28:55 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 12:28:56 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 13:29:01 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 14:29:10 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 15:29:38 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
# prtconf
System Configuration: Sun Microsystems i86pc
Memory size: 4132 Megabytes
System Peripherals (Software Nodes):
i86pc
scsi_vhci, instance #0
isa, instance #0
i8042, instance #0
keyboard, instance #0
mouse, instance #0
lp, instance #0
asy, instance #0
asy, instance #1
fdc, instance #0
fd, instance #0
pci, instance #0
pci15ad,1976 (driver not attached)
pci8086,7191, instance #0
pci15ad,1976 (driver not attached)
pci-ide, instance #0
ide, instance #0
sd, instance #1
ide (driver not attached)
pci15ad,1976 (driver not attached)
display, instance #0
pci1000,30, instance #0
sd, instance #0
pci15ad,750, instance #0
iscsi, instance #0
pseudo, instance #0
options, instance #0
agpgart, instance #0
xsvc, instance #0
objmgr, instance #0
acpi (driver not attached)
used-resources (driver not attached)
cpus, instance #0
cpu (driver not attached)
cpu (driver not attached)
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 10440 alt 2 hd 255 sec 63>
/pci@0,0/pci1000,30@10/sd@0,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c1t0d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c1t0d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c1t0d0s3 is currently mounted on /usr. Please see umount(1M).
/dev/dsk/c1t0d0s4 is currently mounted on /var. Please see umount(1M).
/dev/dsk/c1t0d0s5 is currently mounted on /opt. Please see umount(1M).
/dev/dsk/c1t0d0s6 is part of SVM volume sp:d8. Please see metaclear(1M).
/dev/dsk/c1t0d0s7 contains an SVM mdb. Please see metadb(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 10440 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 131 1.00GB (131/0/0) 2104515
1 swap wu 132 - 1176 8.01GB (1045/0/0) 16787925
2 backup wm 0 - 10439 79.97GB (10440/0/0) 167718600
3 usr wm 1177 - 1829 5.00GB (653/0/0) 10490445
4 var wm 1830 - 2091 2.01GB (262/0/0) 4209030
5 unassigned wm 2092 - 2614 4.01GB (523/0/0) 8401995
6 unassigned wm 2617 - 10439 59.93GB (7823/0/0) 125676495
7 unassigned wm 2615 - 2616 15.69MB (2/0/0) 32130
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> quit
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> q
# metastat -p
d8 -p c1t0d0s6 -o 109973513 -b 61440
d7 -p c1t0d0s6 -o 109461512 -b 512000
d6 -p c1t0d0s6 -o 109051911 -b 409600
d5 -p c1t0d0s6 -o 88080390 -b 20971520
d4 -p c1t0d0s6 -o 67108869 -b 20971520
d3 -p c1t0d0s6 -o 46137348 -b 20971520
d2 -p c1t0d0s6 -o 41943043 -b 4194304
d1 -p c1t0d0s6 -o 20971522 -b 20971520
d0 -p c1t0d0s6 -o 1 -b 20971520An easy way to think of it is this -- everything in Unix is a file. Including directories; they are just a file which contains a list of the files in that directory, and pointers to them.
If the 'sybase' user has write permission on the directory, they have permission to edit that "list", and can add or remove files to the list. It doesn't matter who the files on the list belong to, because the files are not what is being modified. Only the list of files is being modified. (Of course, in Unix, if you erase the file's listing from all of the lists it's on, the file itself goes away for housekeeping purposes.)
One thing that would have stopped the 'sybase' user from removing the lost+found directory is if that directory itself had files in it -- without write permission to the lost+found directory, that user could not have removed those files, and since one cannot remove a non-empty directory, that operation would have failed. Since lost+found was empty in this case, it could be removed simply by having permission to write to the /apps directory.
This behavior does change if you set the sticky bit on the directory -- in that case, files may only be removed by the owner of the file or directory, or if the user has write permission to the file. This would have prevented the sybase user from removing the lost+found directory. (Note, this also applies to the 'rename' function call.) This would probably be the best way to handle your situation, since you apparently do want the sybase user to be able to add files to /apps, but do not want them to be able to remove lost+found.
Edited by: MadBishop on Sep 12, 2008 7:46 AM -
Technical Information of Sap Business One
Hi,
i need some technical information about a possible installation of Sap Business One Package:
- Can Sap B1 run on a Microsoft cluster composer of virtual machine VMWARE?
- Can Sap B1 run on a machine with 64 bit technology?
- Can client Sap B1 run on Citrix with gateway access?
If nobody can help me, tell me where I can post this question...
Thank you
Regards
MarcoHi Marco,
This is not the right forum for that question (SAP Support - or the Implemantation Forum in the Channel Partner Solutiuon Network may suit better...), but anway:
>- Can Sap B1 run on a Microsoft cluster composer of virtual machine VMWARE?
VMWare hasn't been released; it may work (and I heard about people using it ), but if a problem can actually be traced back being a VMWare issue - you are "alone"...
>- Can Sap B1 run on a machine with 64 bit technology?
Yes, please check the "Supported Platforms" information for B1 in the Channel Partner Portal on SAP Service Marketplace!
>- Can client Sap B1 run on Citrix with gateway access?
Not sue about "gateway access", but Citrix 4.0 (and 3.0) are officially supported.
You can find details at the same place as mentioned above (I don't have the link at hand, sorry).
HTH,
Frank -
Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2
I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
RichardI thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much! -
Solaris 10 5/08 x86 - Pseudocolor visual not available in xdpyinfo
Hello,
I am running Sol 10 5/08 x86 64-bit on a Dell Precision 690 wkstn with WinXP using VMware Workstation 6.0.4. I have a NVIDIA Quadro FX 3500 video card. I am not sure if this is really a VMware issue or one that can be solved using Solaris.
I need to run "Xnest -depth 8 -class Pseudocolor," but my video setup, using the Xorg server (Xsun not supported by VMware Tools), does not support Pseudocolor visuals. Here is my xdpyinfo:
xdpyinfo
name of display: :0.0
version number: 11.0
vendor string: Sun Microsystems, Inc.
vendor release number: 10300000
maximum request size: 16777212 bytes
motion buffer size: 256
bitmap unit, bit order, padding: 32, LSBFirst, 32
image byte order: LSBFirst
number of supported pixmap formats: 7
supported pixmap formats:
depth 1, bits_per_pixel 1, scanline_pad 32
depth 4, bits_per_pixel 8, scanline_pad 32
depth 8, bits_per_pixel 8, scanline_pad 32
depth 15, bits_per_pixel 16, scanline_pad 32
depth 16, bits_per_pixel 16, scanline_pad 32
depth 24, bits_per_pixel 32, scanline_pad 32
depth 32, bits_per_pixel 32, scanline_pad 32
keycode range: minimum 8, maximum 255
focus: window 0x1e0000a, revert to Parent
number of extensions: 37
BIG-REQUESTS
DAMAGE
DEC-XTRAP
DOUBLE-BUFFER
DPMS
Extended-Visual-Information
GLX
MIT-SCREEN-SAVER
MIT-SHM
MIT-SUNDRY-NONSTANDARD
RANDR
RECORD
RENDER
SECURITY
SGI-GLX
SHAPE
ST
SYNC
SolarisIA
TOG-CUP
VMWARE_CTRL
X-Resource
XAccessControlExtension
XC-APPGROUP
XC-MISC
XEVIE
XFIXES
XFree86-Bigfont
XFree86-DGA
XFree86-Misc
XFree86-VidModeExtension
XINERAMA
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
default screen number: 0
number of screens: 1
screen #0:
dimensions: 1600x1200 pixels (542x406 millimeters)
resolution: 75x75 dots per inch
depths (7): 24, 1, 4, 8, 15, 16, 32
root window id: 0x3e
depth of root window: 24 planes
number of colormaps: minimum 1, maximum 1
default colormap: 0x20
default number of colormap cells: 256
preallocated pixels: black 0, white 16777215
options: backing-store NO, save-unders NO
largest cursor: 32x32
current input event mask: 0xfa2033
KeyPressMask KeyReleaseMask EnterWindowMask
LeaveWindowMask ButtonMotionMask StructureNotifyMask
SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask
PropertyChangeMask ColormapChangeMask
number of visuals: 4
default visual id: 0x22
visual:
visual id: 0x22
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x23
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x24
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x25
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
Notice that only 4 TrueColor visuals are supported. Does anyone know how I can change my setup so that my Xserver supports a Pseudocolor visual? VMware Tools is very limited for Solaris, and it set up the Xserver for me.
Any help or advice anyone could provide would be greatly appreciated.
Thanks...I installed the latest nvidia driver and ran nvidia-xconfig, which made a new xorg.conf file. Option "CIOverlay" is in the new file, which should enable Pseudocolor visuals. However, after rebooting with -- -r, Xorg won't start. Xerrors says:
No devices detected
Fatal server error:
no screens found
XIO: fatal IO error 146 (Connection refused) on X server ":0.0"
error (pid 714): Server for display :0 can't be started
/var/log/Xorg.0.log appears to show that /usr/X11/lib/modules/drivers//nvidia_drv.so (compiled for 4.0.2, module version 1.0.0) is loaded:
(II) NVIDIA dlloader X driver 173.14.09
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Prinmary Device is: PCI 00:0f:0
(EE) No devices detected
So Xorg can't find my video devices. This page: http://us.download.nvidia.com/solaris/173.14.09/README/appendix-c.html does show that the Quadro FX 3500 is suppoted (thank heavens).
When I run /usr/X11/bin/scanpci I get:
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x7190
Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x7191
Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x8086 device 0x7110
Intel Corporation 82371AB/EB/MB PIIX4 ISA
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x8086 device 0x7111
Intel Corporation 82371AB/EB/MB PIIX4 IDE
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x8086 device 0x7113
Intel Corporation 82371AB/EB/MB PIIX4 ACPI
pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x15ad device 0x0405
VMware Inc Abstract SVGA II Adapter
pci bus 0x0000 cardnum 0x10 function 0x00: vendor 0x1000 device 0x0030
LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x15ad device 0x0790
VMware Inc Device unknown
pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x8086 device 0x100f
Intel Corporation 82545EM Gigabit Ethernet Controller (Copper)
pci bus 0x0002 cardnum 0x01 function 0x00: vendor 0x1274 device 0x1371
Ensoniq ES1371 [AudioPCI-97]
Only VMware devices are seen, and there is nothing in /dev/fbs except "text-0 -> ../../devices/pci@0,0/display@f:text-0"
There is a /dev/nvidia0 and it should be symlinked to /dev/fbs/nvidia0, but the link is broken. Can Solaris 10 use the installed Solaris NVIDIA drivers in a VMware workstation environment? The only way I can get Solaris to work is to use the vmware video driver, which does not support pseudocolor visuals.
Maybe you are looking for
-
Hi Friends, I'm using FileUpload in one of my screen, so I'm using form enctype="multipart/form-data" and using apache commons fileUpload library. The file upload is working fine and I'm navigated from 1st screen to the 2nd screen. but in the 2nd scr
-
How do I get the iCloud icon to appear in my System Preference/Internet & Wireless section to turn it on. Again I only have Mobile Me icon. When I check for updating of software it says there are no updates. I currently have OS X Version 10.5.8 on
-
Cd jewel case insert prints backwards
I purchased a CD on itunes. When I try to print the jewel case, it prints backwards. What can I do to correct this issue?
-
How do i fix search on start menu?
When I click search on start menu it appears and then disappears. I`ve tried everything and nothing works. Can anyone help please? Thanks for any advice.
-
I have updated to OS X 10.10.3 and moved onto photos from iPhotos....but in checking my hard disk, now I have iPhoto library and Photos library. Should I keep both on my drive? Why did Mac not automatically delete iPhotos library after successfully u