[vmware] Problem to build vmnet module with 2.6.22 kernel

Hi,
I follow the wiki
And I have a problem to build vmnet module.
Do you wish to configure another host-only network? (yes/no) [no]
Extracting the sources of the vmnet module.
Building the vmnet module.
Building for VMware Server 1.0.0.
Using 2.6.x kernel build system.
make: entrant dans le répertoire « /tmp/vmware-config0/vmnet-only »
make -C /lib/modules/2.6.22-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: entrant dans le répertoire « /usr/src/linux-2.6.22-ARCH »
  CC [M]  /tmp/vmware-config0/vmnet-only/driver.o
  CC [M]  /tmp/vmware-config0/vmnet-only/hub.o
  CC [M]  /tmp/vmware-config0/vmnet-only/userif.o
  CC [M]  /tmp/vmware-config0/vmnet-only/netif.o
  CC [M]  /tmp/vmware-config0/vmnet-only/bridge.o
  CC [M]  /tmp/vmware-config0/vmnet-only/filter.o
  CC [M]  /tmp/vmware-config0/vmnet-only/procfs.o
  CC [M]  /tmp/vmware-config0/vmnet-only/smac_compat.o
  CC [M]  /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
  LD [M]  /tmp/vmware-config0/vmnet-only/vmnet.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-config0/vmnet-only/vmnet.mod.o
  LD [M]  /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: quittant le répertoire « /usr/src/linux-2.6.22-ARCH »
cp -f vmnet.ko ./../vmnet.o
make: quittant le répertoire « /tmp/vmware-config0/vmnet-only »
Unable to make a vmnet module that can be loaded in the running kernel:
insmod: error inserting '/tmp/vmware-config0/vmnet.o': -1 File exists
There is probably a slight difference in the kernel configuration between the
set of C header files you specified and your running kernel.  You may want to
rebuild a kernel based on that directory, or specify another directory.
For more information on how to troubleshoot module-related problems, please
visit our Web site at "http://www.vmware.com/download/modules/modules.html" and
"http://www.vmware.com/support/reference … linux.html".
Execution aborted.
How to resolve this?
Thanks for your help.
Last edited by cassy (2007-10-16 08:55:42)

You need to apply some patches to get it to compile with newer kernels. I'd suggest using the PKGBUILD in AUR.

Similar Messages

  • Problem in build netbean projects with jaxb

    Hi, I encounter the problem which I dont' know if it is due to my pc memory insufficient or other reason.
    In my netbean projects, I add a Jaxb binding with a local xsd file, but when I try to clean and build the project, each time I have to wait for around 25 minutes, i think it is not make sense to build in such a time. As if I want to debug/run the project each time, it is impossible for me to wait like this.
    However, I have to use the xml file in that way, if I can't solve this problem, i have to write / use other method to "eat" the xml file for myself.
    Any suggestion or help is appreciated, thx.....

    Bishnu,
    Thanx for the response.
    My problem is whenever i do a little modification in the code, even if i just do some chanes & undo it then also i need to rebuild the application.
    There is a single project in my workshop which is pretty huge.As per your reply i am getting only two parts to check & uncheck i.e. If the project is "A" then i am getting A.work & project:A in the build box.
    The most important question: Do i need to shut down the server each time i make a small change?Even i have tried this by restarting the server,but every time i get the message that "the Controller.jpf could not compile."
    Any idea is most welcome.
    Samir

  • Problem when building an executable with labview 6.1

    I use LabView 6.1 and I want to build up an executable. I use the labview application builder to do this. I have already built up executables and I had no problems but this time I just obtain a labview vi library which is called "internal.llb" each time I try to compile my vi's. Do you have an idea to solve my problem please ?

    Make sure that you have "Single target file containing all VIs" selected
    under Build Option in the Target Tab of the App builder. Sounds like you
    have "Small target file with external file for subVIs" selected with the
    target being a llb.
    -Tom
    "gege" wrote in message
    news:[email protected]..
    > I use LabView 6.1 and I want to build up an executable. I use the
    > labview application builder to do this. I have already built up
    > executables and I had no problems but this time I just obtain a
    > labview vi library which is called "internal.llb" each time I try to
    > compile my vi's. Do you have an idea to solve my problem please ?

  • Problems to found Bluetooth module with labview !

    Hi, I'm using "conceptronic BT200NANO" bluetooth module in my PC.
    The "Bluetooth discover" labview driver placed in "Bluetooth" folder doesn't found my Bluetooth server !!!!!!
    Does Anybody know the cause ?
    Thxs a lot !! 

    Hi and thxs !
    I'm using IVT driver with windows XP -----> Here say that this driver is operative under Windows XP  : http://www.bluecove.org/bluecove-examples/bluetooth-stack.html
    The BT connection on my PC is runing correctly ! (see the JPG).
    The Hw adreces of my dispositives are ......(See the JPG).
    Why the labVIEW drivers no are operative in my *.vi ????
    Regards,
    Oriol
    Attachments:
    BTProblem.JPG ‏46 KB
    BTProblem_VI.JPG ‏1208 KB
    btProblem2.JPG ‏802 KB

  • [solved] catalyst: Building fglrx module for 3.0-ARCH failing

    I'm running Arch on my laptop since some time now.
    Lately I've done some updates and encountered a problem with my ati (catalyst driver).
    Everytime the auto-build module tries to compile, I'm getting an error:
    $ sudo catalyst_build_module allg
    Building fglrx module for 3.0-ARCH kernel ...
    Failed!!! Check out log: /var/log/catalyst-install.log
    this is what gets logged:
    2011-08-29 15:52:07
    Building fglrx module for 3.0-ARCH kernel ...
    Kernel header files are absent: directory /lib/modules/3.0-ARCH/build doesn't exist! Game over
    I checked it and that build directory is obviously really missing.
    I appreciate any help from you guys, since it's really odd to work on this laptop without the correct graphics drivers..
    this is my video card:
    # lspci -v | grep "VGA"
    01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series] (prog-if 00 [VGA controller])
    please let me know if you need more information and thanks in advance for your help!
    Last edited by derblub (2011-08-29 16:39:22)

    well, ok - this was too oblivious now
    thank you very much!

  • [SOLVED] Can't build vboxdrv module

    I can't build vboxdrv module with latest kernel 2.6.32.When I run vbox_build_module, I get
    Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
    make[1]: Leaving directory `/opt/VirtualBox/src/vboxdrv'
    make: *** [all] Error 2
    but, when I run
    KERN_DIR=/usr/src/linux-2.6.32-ARCH vbox_build_module
    I get this error
    Makefile:179: *** Error: unable to find the include directory for your current Linux kernel. Specify KERN_INCL=<directory> and run Make again. Stop.
    make[1]: Leaving directory `/opt/VirtualBox/src/vboxdrv'
    make: *** [all] Error 2
    What is the problem here?
    Last edited by na12 (2009-12-31 09:26:34)

    Also using Virtualbox here and was able to build the modules against the new kernel using this procedure:
    Update kernel 31 --> 32
    install kernel26-headers (seems to me you have the wrong kernel-headers package)
    reboot
    rebuild mkinitcpio (KMS)
    reboot
    rebuild vbox modules
    modprobe them or reboot
    Last edited by ulukai (2009-12-31 08:38:07)

  • How to build a form with multiple tables in oracle application express

    Hi everyone,
    I have got problem in building a form with multiple tables.I have a main table with (20) columns and this main table is related to the other tables with the primary key-foreign key relation ship.My requirement is i have to build a form which has fields from many tables and all the fields are related to the main table using (ID) column.In that form if i enter ID field i have to get information from differnt tables.
    Please help me to solve this (building a form with mutiple tables)
    Thank you
    sans

    Sans,
    I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
    This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

  • Problem in soademo registering FulfillmentESB with ESB Server

    Hi,all
    I am a beginner in soa suite. Now I am stuck in a problem about registering FulfillmentESB module with ESB Server in soademo. The ESB registeration summary dialog display this error message:
    Entity Deployment Failed
    error code: 1003 : 5
    summary: Failed to create System "Fullfillment"
    Fix: Ensure that the (a) Repository is available. (b) The Connection information for the Repository is Valid. Also verify the detailed cause of error if available. Contact Oracle Support if error not fixable.
    Then I try to enter the ESB Control from the SOA page. After logon, I can't see anything in the ESB Control. It seems like the ESB IS is not connecting to the backend DB. But How can I solve this problem?
    Any help would be appreciated!
    Peter

    Dear Martin,
    First of all I should thank for your attention. In order to save time, I should say that another thread is started regarding this problem, so to have a better focus I am inserting messages that may give some clues here too.
    1. Regarding service OLITE, I should say that there is no service with this name. I think it is because I have used recommendations of soademo and used oracleXE database. If I'm right.
    2.I am using DHCP, and all of the things are installed on my laptop, and there would be no need to other network resources.
    3.In hosts file there is only one line :
    127.0.0.1 localhost
    4.Windows firewall has been activated but some exceptions have been available.
    The exact messages in log files are followed:
    default_group_home_default_group-1:1.Unable to create a connection to "karimi_vaio/192.168.32.55:12,601" as user "null".
    javax.jms.JMSException: Unable to create a connection to "karimi_vaio/192.168.32.55:12,601" as user "null"
    2.<2007-04-28 00:53:27,859> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://karimi_vaio:8888
    oc4j\log :1.deployment failed with error
    2.Entity Deployment Failed
    Thanks in advance

  • VMware 9.0.2 vmnet fails to build on 3.13.7

    So yet another thread and problem with VMware and I've tried all different kind of patches from all kind of places without any results.
    As usual with an upgrade (Syu) I needed to rebuild vmblock and vmnet. vmblock built successfully using the available patches for 3.13, vmnet however didn't.
    I've tried the solution listed on http://dandar3.blogspot.se/2014/01/vmwa … alpha.html, tried the one listed on the wiki (patch that came with vmblock), tried the patch in the AUR vmware-patch, but nothing. I've also tried reinstalling the packages listed in some threads that got it working for a few people, that did however not help me.
    This is the log from the last run, I've used the patch that came with vmblock (the solution listed on the wiki), I'm using the stock kernel which means no netfilter.
    Logging to /tmp/vmware-root/vmware-modconfig-724.log
    Stopping VMware services:
    VMware Authentication Daemon done
    VM communication interface socket family done
    Virtual machine communication interface done
    Virtual machine monitor done
    Blocking file system done
    make: Entering directory '/tmp/modconfig-6SBn6j/vmnet-only'
    Using 2.6.x kernel build system.
    /sbin/make -C /lib/modules/3.13.7-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
    MODULEBUILDDIR= modules
    make[1]: Entering directory '/usr/lib/modules/3.13.7-1-ARCH/build'
    CC [M] /tmp/modconfig-6SBn6j/vmnet-only/driver.o
    CC [M] /tmp/modconfig-6SBn6j/vmnet-only/hub.o
    CC [M] /tmp/modconfig-6SBn6j/vmnet-only/userif.o
    CC [M] /tmp/modconfig-6SBn6j/vmnet-only/netif.o
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:28:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/netif.c:42:
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompilePtr':
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:28:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/driver.c:51:
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompilePtr':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2558:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Ptr, 64, void const *, void *, uintptr_t)
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2558:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Ptr, 64, void const *, void *, uintptr_t)
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompileInt':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2562:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Int, 32, int, int, int)
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompileInt':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2562:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Int, 32, int, int, int)
    ^
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:28:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/userif.c:46:
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompilePtr':
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:31:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:29,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/netif.c:42:
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h: In function 'MonitorActionSet_AtomicInclude':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_assert.h:320:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:91:4: note: in expansion of macro 'ASSERT_ON_COMPILE'
    ASSERT_ON_COMPILE((ACTION_WORD_SIZE & (ACTION_WORD_SIZE - 1)) == 0);
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2558:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Ptr, 64, void const *, void *, uintptr_t)
    ^
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:28:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/hub.c:43:
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompilePtr':
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:31:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:29,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/driver.c:51:
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h: In function 'MonitorActionSet_AtomicInclude':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2558:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Ptr, 64, void const *, void *, uintptr_t)
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompileInt':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_assert.h:320:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:91:4: note: in expansion of macro 'ASSERT_ON_COMPILE'
    ASSERT_ON_COMPILE((ACTION_WORD_SIZE & (ACTION_WORD_SIZE - 1)) == 0);
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2562:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Int, 32, int, int, int)
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h: In function 'AtomicAssertOnCompileInt':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2397:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_atomic.h:2562:1: note: in expansion of macro 'MAKE_ATOMIC_TYPE'
    MAKE_ATOMIC_TYPE(Int, 32, int, int, int)
    ^
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:31:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:29,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/userif.c:46:
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h: In function 'MonitorActionSet_AtomicInclude':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_assert.h:320:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:91:4: note: in expansion of macro 'ASSERT_ON_COMPILE'
    ASSERT_ON_COMPILE((ACTION_WORD_SIZE & (ACTION_WORD_SIZE - 1)) == 0);
    ^
    In file included from /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:31:0,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnet.h:29,
    from /tmp/modconfig-6SBn6j/vmnet-only/vnetInt.h:24,
    from /tmp/modconfig-6SBn6j/vmnet-only/hub.c:43:
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h: In function 'MonitorActionSet_AtomicInclude':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_assert.h:320:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/monitorAction_exported.h:91:4: note: in expansion of macro 'ASSERT_ON_COMPILE'
    ASSERT_ON_COMPILE((ACTION_WORD_SIZE & (ACTION_WORD_SIZE - 1)) == 0);
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/hub.c: In function 'VNetHubFindHubByID':
    /tmp/modconfig-6SBn6j/vmnet-only/hub.c:132:49: warning: argument to 'sizeof' in 'memcmp' call is the same expression as the first source; did you mean to provide an explicit length? [-Wsizeof-pointer-memaccess]
    memcmp(idNum, currHub->id.pvnID, sizeof idNum))) {
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/hub.c: In function 'VNetHubAlloc':
    /tmp/modconfig-6SBn6j/vmnet-only/hub.c:315:36: warning: argument to 'sizeof' in 'memcpy' call is the same pointer type 'uint8 *' as the destination; expected 'uint8' or an explicit length [-Wsizeof-pointer-memaccess]
    memcpy(hub->id.pvnID, id, sizeof id);
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/hub.c:366:28: error: dereferencing pointer to incomplete type
    jack->procEntry->read_proc = VNetHubProcRead;
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/hub.c:367:28: error: dereferencing pointer to incomplete type
    jack->procEntry->data = jack;
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/userif.c: In function 'VNetUserIfIoctl':
    /tmp/modconfig-6SBn6j/vmnet-only/vm_assert.h:320:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/userif.c:810:7: note: in expansion of macro 'ASSERT_ON_COMPILE'
    ASSERT_ON_COMPILE(VNET_NOTIFY_VERSION == 5);
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/vm_assert.h:320:20: warning: typedef 'AssertOnCompileFailed' locally defined but not used [-Wunused-local-typedefs]
    typedef char AssertOnCompileFailed[AssertOnCompileMisused]; \
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/userif.c:811:7: note: in expansion of macro 'ASSERT_ON_COMPILE'
    ASSERT_ON_COMPILE(ACTION_EXPORTED_VERSION == 2);
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/userif.c: In function 'VNetUserIf_Create':
    /tmp/modconfig-6SBn6j/vmnet-only/userif.c:1049:34: error: dereferencing pointer to incomplete type
    userIf->port.jack.procEntry->read_proc = VNetUserIfProcRead;
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/userif.c:1050:34: error: dereferencing pointer to incomplete type
    userIf->port.jack.procEntry->data = userIf;
    ^
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-6SBn6j/vmnet-only/hub.o' failed
    make[2]: *** [/tmp/modconfig-6SBn6j/vmnet-only/hub.o] Error 1
    make[2]: *** Waiting for unfinished jobs....
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-6SBn6j/vmnet-only/userif.o' failed
    make[2]: *** [/tmp/modconfig-6SBn6j/vmnet-only/userif.o] Error 1
    /tmp/modconfig-6SBn6j/vmnet-only/netif.c: In function 'VNetNetIf_Create':
    /tmp/modconfig-6SBn6j/vmnet-only/netif.c:191:33: error: dereferencing pointer to incomplete type
    netIf->port.jack.procEntry->read_proc = VNetNetIfProcRead;
    ^
    /tmp/modconfig-6SBn6j/vmnet-only/netif.c:192:33: error: dereferencing pointer to incomplete type
    netIf->port.jack.procEntry->data = netIf;
    ^
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-6SBn6j/vmnet-only/netif.o' failed
    make[2]: *** [/tmp/modconfig-6SBn6j/vmnet-only/netif.o] Error 1
    Makefile:1249: recipe for target '_module_/tmp/modconfig-6SBn6j/vmnet-only' failed
    make[1]: *** [_module_/tmp/modconfig-6SBn6j/vmnet-only] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.13.7-1-ARCH/build'
    Makefile:130: recipe for target 'vmnet.ko' failed
    make: *** [vmnet.ko] Error 2
    make: Leaving directory '/tmp/modconfig-6SBn6j/vmnet-only'
    Failed to build vmnet. Failed to execute the build command.
    $ uname -a
    Linux prometheus 3.13.7-1-ARCH #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014 x86_64 GNU/Linux
    $ vmware --version
    VMware Workstation 9.0.2 build-1031769
    Thanks in advance
    Last edited by darnit (2014-03-28 21:11:46)

    this issue was particularly upsetting today, as my phone was at 100% last night, during the night Irene knocked our power out, and apparently something about this drained by battery to only 40% when I woke up. Luckily my laptop is charged, so I can usb charge my phone, but I had hoped to use that later in the day, not first thing in the morning.
    hopefully a resolution to this is being worked on.

  • Vmware Problems with kernel26beyond

    Hi folks,
    I have two problems with vmware-server from AUR, but only with the beyond kernel. On the stock kernel vmware runs without problems.
    I added vmware to daemons in rc.conf. I ran vmware-config.pl. But everytime I want to start vmware (under beyond kernel) I get this:
    vmware is installed, but it has not been (correctly) configured
    for this system. To (re-)configure it, invoke the following command:
    /usr/bin/vmware-config.pl.
    After deleting /etc/vmware/not_configured I can start the vmware-server until the next reboot (then I have to delete it again).
    But the major problem is an other thing. Wether I want to start my virtual machine (Windows 2000) I get an error too, but I couldn't  find out a workaround.
    Unable to change virtual machine power state: The process exited with an error:
    End of error message.
    With the stock kernel no issue.
    Can anyone help me?
    greetings
    SuiRIS

    ratur wrote:
    tomk wrote:My guess is you don't have the vmmon and vmnet modules for the beyond kernel, only for kernel26. Get vmware-server-modules from the AUR, change the _kernver variable to 2.6.19-beyond, and build.
    That worked  for me
    For me too! Thanks tomk, you are my hero

  • Problem rebuilding VMWare Workstation 10.0.2 Modules

    Hi,
    today I updated my Kernel to 3.14.2-1 and wanted to rebuild the modules for VMware Workstation 10.0.2. Doing so causes the following error.
    I used this patch before http://pastie.org/pastes/9090538/.
    Has there been major changes between 3.14.1-1 and 3.14.2-1 which cause this problems? It worked before. Someone else experiences this?
    Greets
    PhilAd
    # vmware-modconfig --console --install-all
    Stopping VMware services:
    VMware Authentication Daemon done
    VM communication interface socket family done
    Virtual machine communication interface done
    Virtual machine monitor done
    Blocking file system done
    make: Entering directory '/tmp/modconfig-WBV6v7/vmmon-only'
    Using 2.6.x kernel build system.
    /sbin/make -C /lib/modules/3.14.2-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
    MODULEBUILDDIR= modules
    make[1]: Entering directory '/usr/lib/modules/3.14.2-1-ARCH/build'
    Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/linux/driverLog.o
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/linux/driver.o
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/linux/hostif.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/linux/driverLog.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/linux/driverLog.o] Error 1
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/common/apic.o
    make[2]: *** Warte auf noch nicht beendete Prozesse...
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/common/memtrack.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/linux/driver.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/linux/driver.o] Error 1
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/linux/hostif.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/linux/hostif.o] Error 1
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/common/hashFunc.o
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/common/vmx86.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/common/apic.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/common/apic.o] Error 1
    CC [M] /tmp/modconfig-WBV6v7/vmmon-only/common/cpuid.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/common/memtrack.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/common/memtrack.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/common/hashFunc.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/common/hashFunc.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/common/vmx86.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/common/vmx86.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmmon-only/common/cpuid.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmmon-only/common/cpuid.o] Error 1
    Makefile:1274: recipe for target '_module_/tmp/modconfig-WBV6v7/vmmon-only' failed
    make[1]: *** [_module_/tmp/modconfig-WBV6v7/vmmon-only] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.14.2-1-ARCH/build'
    Makefile:130: recipe for target 'vmmon.ko' failed
    make: *** [vmmon.ko] Error 2
    make: Leaving directory '/tmp/modconfig-WBV6v7/vmmon-only'
    make: Entering directory '/tmp/modconfig-WBV6v7/vmnet-only'
    Using 2.6.x kernel build system.
    /sbin/make -C /lib/modules/3.14.2-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
    MODULEBUILDDIR= modules
    make[1]: Entering directory '/usr/lib/modules/3.14.2-1-ARCH/build'
    Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
    CC [M] /tmp/modconfig-WBV6v7/vmnet-only/driver.o
    CC [M] /tmp/modconfig-WBV6v7/vmnet-only/hub.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmnet-only/driver.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmnet-only/driver.o] Error 1
    CC [M] /tmp/modconfig-WBV6v7/vmnet-only/userif.o
    CC [M] /tmp/modconfig-WBV6v7/vmnet-only/netif.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    make[2]: *** Warte auf noch nicht beendete Prozesse...
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmnet-only/hub.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmnet-only/hub.o] Error 1
    CC [M] /tmp/modconfig-WBV6v7/vmnet-only/bridge.o
    CC [M] /tmp/modconfig-WBV6v7/vmnet-only/filter.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmnet-only/userif.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmnet-only/userif.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmnet-only/netif.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmnet-only/netif.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmnet-only/bridge.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmnet-only/bridge.o] Error 1
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmnet-only/filter.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmnet-only/filter.o] Error 1
    Makefile:1274: recipe for target '_module_/tmp/modconfig-WBV6v7/vmnet-only' failed
    make[1]: *** [_module_/tmp/modconfig-WBV6v7/vmnet-only] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.14.2-1-ARCH/build'
    Makefile:130: recipe for target 'vmnet.ko' failed
    make: *** [vmnet.ko] Error 2
    make: Leaving directory '/tmp/modconfig-WBV6v7/vmnet-only'
    make: Entering directory '/tmp/modconfig-WBV6v7/vmci-only'
    Using 2.6.x kernel build system.
    /sbin/make -C /lib/modules/3.14.2-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
    MODULEBUILDDIR= modules
    make[1]: Entering directory '/usr/lib/modules/3.14.2-1-ARCH/build'
    Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/linux/driver.o
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/linux/vmciKernelIf.o
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/common/vmciDriver.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/common/vmciResource.o
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/linux/driver.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/linux/driver.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    make[2]: *** Warte auf noch nicht beendete Prozesse...
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/linux/vmciKernelIf.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/linux/vmciKernelIf.o] Error 1
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/common/vmciRoute.o
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/common/vmciContext.o
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/common/vmciDatagram.o
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    CC [M] /tmp/modconfig-WBV6v7/vmci-only/common/vmciHashtable.o
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/common/vmciContext.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/common/vmciContext.o] Error 1
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/common/vmciDriver.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/common/vmciDriver.o] Error 1
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/common/vmciResource.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/common/vmciResource.o] Error 1
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/common/vmciRoute.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/common/vmciRoute.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/common/vmciDatagram.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/common/vmciDatagram.o] Error 1
    gcc: Fehler: nicht erkannte Kommandozeilenoption »-fstack-protector-strong«
    scripts/Makefile.build:308: recipe for target '/tmp/modconfig-WBV6v7/vmci-only/common/vmciHashtable.o' failed
    make[2]: *** [/tmp/modconfig-WBV6v7/vmci-only/common/vmciHashtable.o] Error 1
    Makefile:1274: recipe for target '_module_/tmp/modconfig-WBV6v7/vmci-only' failed
    make[1]: *** [_module_/tmp/modconfig-WBV6v7/vmci-only] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.14.2-1-ARCH/build'
    Makefile:130: recipe for target 'vmci.ko' failed
    make: *** [vmci.ko] Error 2
    make: Leaving directory '/tmp/modconfig-WBV6v7/vmci-only'
    Unable to install all modules. See log for details.

    We're done here.
    @jaylittle - Arch and it's team owe you nothing except freedom -- and you have that freedom to tell your story walking. This is your first warning
    https://wiki.archlinux.org/index.php/Fo … ther_Users
    https://wiki.archlinux.org/index.php/Fo … _Not_Flame
    https://wiki.archlinux.org/index.php/Fo … IKESHED.29
    https://wiki.archlinux.org/index.php/Fo … 2C_Banning
    Closing -- apologies to the OP that this got hijacked in such a negative manner, but we do appear to have an answer to the problem, the solution just needs to progress through [testing] et al. Please ensure a bug report has been filed; the devs don't monitor the forums for bugs.

  • I have a problem, i can't generate with DPS App Builder "App distribuzione.zip" to be sent to Apple to publish APP, this is the error message: is not a valid distribution certificate Apple. What do I do?

    I have a problem, i can't generate with DPS App Builder "App distribuzione.zip" to be sent to Apple to publish APP, this is the error message: is not a valid distribution certificate Apple. What do I do?

    As Bern510 says, you'll need to recreate certificates that are valid. I suggest following our step-by-step publishing guide, which walks through how to obtain certificates correctly.
    http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf
    Neil

  • [cisco VPN] Can't build kernel module with 2.6.9-ARCH

    I need to setup a vpn tunnel to my university in order to gain acces to their resources and be able to surf when I am on the campus. With 2.6.8.1 I used the Cisco VPN client 4.0.5 k9. After my upgrade to 2.6.9 I had to rebuild the module, but now it fails to build. Anyone knows how to solve this? Or does anyone know another vpn client that is compatible with Cisco. This piece of software is essential to me. Please help. Here is the output:
    Cisco Systems VPN Client Version 4.0.5 (Rel) Linux Installer
    Copyright (C) 1998-2001 Cisco Systems, Inc. All Rights Reserved.
    By installing this product you agree that you have read the
    license.txt file (The VPN Client license) and will comply with
    its terms.
    Directory where binaries will be installed [/usr/local/bin] /usr/bin
    Automatically start the VPN service at boot time [yes] no
    In order to build the VPN kernel module, you must have the
    kernel headers for the version of the kernel you are running.
    For RedHat 6.x users these files are installed in /usr/src/linux by default
    For RedHat 7.x users these files are installed in /usr/src/linux-2.4 by default
    For Suse 7.3 users these files are installed in /usr/src/linux-2.4.10.SuSE by default
    Directory containing linux kernel source code [/lib/modules/2.6.9-ARCH/build]
    * Binaries will be installed in "/usr/bin".
    * Modules will be installed in "/lib/modules/2.6.9-ARCH/CiscoVPN".
    * The VPN service will *NOT* be started automatically at boot time.
    * Kernel source from "/lib/modules/2.6.9-ARCH/build" will be used to build the module.
    Is the above correct [y] y
    Making module
    make -C /lib/modules/2.6.9-ARCH/build SUBDIRS=/home/luk/sources/vpnclient modules
    make[1]: Entering directory `/usr/src/linux-2.6.9-ARCH'
    CC [M] /home/luk/sources/vpnclient/interceptor.o
    /home/luk/sources/vpnclient/interceptor.c: In function `add_netdev':
    /home/luk/sources/vpnclient/interceptor.c:59: sorry, unimplemented: inlining failed in call to 'supported_device': function body not available
    /home/luk/sources/vpnclient/interceptor.c:245: sorry, unimplemented: called from here
    make[2]: *** [/home/luk/sources/vpnclient/interceptor.o] Error 1
    make[1]: *** [_module_/home/luk/sources/vpnclient] Error 2
    make[1]: Leaving directory `/usr/src/linux-2.6.9-ARCH'
    make: *** [default] Error 2
    Failed to make module "cisco_ipsec.ko".

    I modified the pkgbuild posted here by someone (thank you!) so it includes all relevant files (meaning also vpnc-connect and vpnc-disconnect and vpnc.conf).
    pkgname=vpnc
    pkgver=0.2
    pkgrel=1
    pkgdesc="Client for Cisco3000 VPN Concentrator"
    url="http://www.unix-ag.uni-kl.de/~massar/vpnc/"
    license="GPL"
    depends=(libgcrypt)
    source=(http://www.unix-ag.uni-kl.de/~massar/vpnc/vpnc-0.2-rm+zomb.1.tar.gz)
    md5sums=(ded67de747874c4245ed8405146dc94a)
    build() {
    cd $startdir/src/vpnc-0.2-rm+zomb.1
    # We want the CFLAGS specified in makepkg.conf to be used
    mv Makefile Makefile.old
    sed -e 's/-W -Wall -O -g/$(MYCFLAGS)/g' -e 's/LDFLAGS=-g /LDFLAGS=/g' Makefile.old > Makefile
    export MYCFLAGS=$CFLAGS
    make
    install -d $startdir/pkg/usr/sbin
    install vpnc $startdir/pkg/usr/sbin
    install vpnc-connect $startdir/pkg/usr/sbin
    install vpnc-disconnect $startdir/pkg/usr/sbin
    install -d $startdir/pkg/etc
    install vpnc.conf $startdir/pkg/etc
    Guess what, it works
    I can reproduce my steps.
    - makepkg
    - pacman -A vpnc-xxxxxx.tar.gz
    - add tun to the daemons array in rc.conf
    - Modify /etc/vpnc.conf
    - vpnc-connect

  • Creative Digital I/O Module with Audigy 2 ZS Problems

    5Creative Digital I/O Module with Audigy 2 ZS Problems? Hello - new to the forums, but a long time Soundblaster user.
    I have read pkc's Digital Connections FAQ, but i am still struggling with my digital setup:
    I have had an Audigy 2 ZS for some time. I have recently bought a surround sound amp and want to connect my PC to the amp digitally using the Audigy 2 ZS. So i have bought the Creative Digital I/O Module which understand is perfect for connecting the two, but i cannot get any output from it.
    Firstly, the Creative Digital I/O Module is part no. SB0002 and has a 4 pole mini jack. I have connected it to the digital output of the Audigy. I have then connected the i/o module to the amp using digital coax cable. The amp receives no signal from the module and also i cannot see any light from the module's optical output. What do i need to do to get the i.o module working with the Audigy and sound to the amp?
    Secondly, i have read in pjc's post that the digital output can act as a digital coax, but how do connect a 4-pole mini jack output to a single phono jack for the digital coax?
    Thanks in advance for any advice here.

    [email protected]

  • Problem with "Building interactive maps with Flex" example

    I have been looking at the tutorial by Matt Sheehan Building interactive maps with Flex found at
    http://www.adobe.com/devnet/flex/articles/interactive_maps.edu.html
    I have downloaded  Flash Builder 4.6 trial version and followed the example. I have also copied the source code from the example and pasted that into the file mymodestmap.mxml.
    In both cases the application opens a new page in Google Chrome but does not display any map data.
    No errors or warnings are displayed when I run the code from Flash Builder.
    Although I have got plenty of experience of writing software, I am a total beginner when it comes to developing web applications!
    Any ideas as to what I am doing wrong, I have attached the source below.
    Cheers
    Steve
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx1="library://ns.adobe.com/flex/halo"
                                     minWidth="1024" minHeight="768" creationComplete="init()" viewSourceURL="srcview/index.html" xmlns:mx="library://ns.adobe.com/flex/mx">
              <fx:Script>
                        <![CDATA[
                                  import mx.core.UIComponent;
                                  import com.modestmaps.TweenMap;   
                                  import com.modestmaps.mapproviders.OpenStreetMapProvider;
                                  import com.modestmaps.geo.Location;
                                  import com.modestmaps.extras.ZoomSlider;
                                  import com.modestmaps.extras.HandCursor; 
                                  [Bindable]private var _map:TweenMap;       
                                  private var _mapUI:UIComponent;
                                  [Bindable]private var _initialLat:Number = 40.668903;
                                  [Bindable]private var _initialLong:Number = -111.680145;
                                  [Bindable]private var _initialZoom:Number = 6;
                                  private var _mouseWheelZoomCenter:Location;
                                  private var _mouseWheelZoom:int;     
                                  private function init():void
                                            _map = new TweenMap(mappanel.width, mappanel.height, true, new OpenStreetMapProvider());   
                                            _map.setCenterZoom(new Location(_initialLat, _initialLong), _initialZoom);
                                            mapCore();
                                  private function mapCore():void
                                            _map.addEventListener(MouseEvent.MOUSE_WHEEL, mouseWheelHandler);   
                                            _mapUI = new UIComponent();
                                            _mapUI.addChild(_map);    
                                            var zoomslider:ZoomSlider = new ZoomSlider(_map);
                                            zoomslider.x = mappanel.width - zoomslider.width*2;
                                            zoomslider.y = 30;
                                            _mapUI.addChild(zoomslider);   
                                            var handcursor:HandCursor = new HandCursor(_map);
                                            _mapUI.addChild(handcursor);
                                            mappanel.addElement(_mapUI);   
                                  private function mouseWheelHandler(e:MouseEvent):void {
                                            if (e.delta < 0) {
                                                      _map.zoomOut();
                                            else if (e.delta > 0) {
                                                      _map.zoomIn();
                                            _mouseWheelZoomCenter = _map.getCenter();
                                            _mouseWheelZoom = _map.getZoom();
                        ]]>
              </fx:Script>
              <s:BorderContainer id="mappanel" width="100%" height="97%"/>
    </s:Application>

    Technically, it's Javascript, not Java :) TOTALLY different beasts. I wish they'd never named it Javascript, it's ambiguous. So anyway, on to the point of the whole thing...
    If you want quotes in your values, you'll need to write a function to replace " with \", and pass the values through it. So instead of javascript:passBack('#ENAME#','#JOB#','#SAL#'); you would have javascript:passBack(addslashes('#ENAME#'),addslashes('#JOB#'),addslashes('#SAL#'));. That would mean that ABC"DEF"GH would be passed to the function as ABC\"DEF\"GH and your quotes would stay intact. Search around on the internet for more specifics as to how to pass double quotes in javascript by using backslashes.
    ~Jer

Maybe you are looking for

  • Error copying application.xml icons: .../bin-release/assets/icons' does not exist

    Hi, Whenever I try to export the release build I get error from COmpiler during the process that "Error copying application.xml icons: Resource '/Project_Name/bin-release/assets/icons' does not exist."  I have specified 4 icons in the -app.xml file o

  • Today Plus theme not showing all-day events

    I am using a Today Plus theme I have downloaded off of bplay and love it.  I use google calendar and sync without problems.  My only issue is that I have many (MANY) all-day events in my google calendar that don't appear on the main page unless I spe

  • No Selective Deletion on Inventory Cube 0IC_C03 via Calendar Day

    Hi, I need to repair my Inventory Cube <b>0IC_C03</b> for a certain date. To do that, I need to perform a <i><b>Selective Deletion</b></i> on the Cube and perform a <b>FULL REPAIR REQUEST</b> limited on that day only. But to my surprise, I could not

  • How to use transform control in java control?

    when i add a transform control into a java control, the workshop show me : The element "jpd:transform" is not allowed at this location Is a transform control must be used in a process file?

  • Cancellation of sales order through VA02

    Hi experts, My user wants to cancel some sales orders through VA02.He select line item 10 and then goes to "reasons for rejection" and put " 51 cancelled".then save it.Systems shows following error and he unables to cancel it. You cannot select assem