Voice mail indicator not working I've tried the steps in voice mail - personal options, 1 to set the indicator to on but 1 is an invalid option:
Documentation says to go into voice mail, select to change the personal options, then 1 to set the indicator on but 1 is not an option on my phone.
Okay so I did all that and I noticed that when someone calls me and my celullar data is on the voicemail registers..... when my cellular data is off and a call comes in and goes to voicemail.... it does not register until I go to call someone else then the notice comes on for as long as I am on the phone.... if I do not make a call for a few days I never know that I have a phone call. I turn off my cellular data since I only have 250MB for the month... and most of the time I am in a wifi zone....which make me wonder if my cellular data is turned on and I am in a wifi zone and should miss a call since the wifi takes over would I get the notice... I should not have this turned on all the time for the sole purpose of knowing if at some time I am in a dead zone and miss a call or not sitting right next to it.... my office is a dead zone as it is in an industrial building..... this is very disappointing especially since it was working for me at some point..... in conclusion still not working
Similar Messages
-
G62 Keyboard not working...tried the other forums
Hey guys,
So I'm super handicapped when it comes to computer fixing...I've always relied on my computer science school friends to fix it and most recently I've been using TeamViewer so my friend in San Diego can help fix my laptop while I'm in Canada.
I have had this G62 since 2010, so everyone says it's time for a replacement get a new one..but i LOVE the look of this one because it has that nice textured feel to the casing and in a nice metallic finish, that was the only reason I bought it aside from price. It was I either get a Dell from my friend that works there or get the HP that looks great and suited my style, and still had the same capabilities as the Dell for half the price on regular MSRP.
So the keyboard now is not functioning so I can't even log on to my laptop because it's password protected. Well, certain keys work, but specifically the "M" doesn't work and that's the first letter of my password, so when I press M it thinks its Enter. It's been intermittent like this for the past few months and I've been struggling to get my life back on track after going through 2 lay offs in 2 years so financially a new one isn't an option.
It all started with the battery not charging and overheating and causing the black screen of death...so my SD friend told me to take it out and just use the plug in thing...AC adapter I believe it's called ?
that's what I've been doing and ever since then everything's great until this keyboard incident...Now...Sometimes it does work...so when it does work then I do my thing, surf the net, type stuff up etc...and I'm a writer so this is really killing me because I need to make a website and I don't want to have to rely on going to my mom's house to use her HP desktop as I'm doing now.
So as I'm typing when it's functional, sometimes the key "w" will close the window i was currently on. or the "Y" closes the tab i was browsing...it's whacky stuff, like someone's taken over my laptop!! Please help!!! Starving artist in need of your help!
and whoever can fix this problem for me, if you want a Mazda, I'll hook you upI suspect all you need is a new keyboard panel, they can be had for around $10USD
You should be able use your notebook by plugging in a USB keyboard as a temporary option or more permanent if you so wish, these can be had free by loan from a friend or cheap from market, garage sale & even new they can be very very cheap.
Keyboard replacement on your model is very easy & case of removing screws with keyboard symbol from base & tilting out keyboard panel to remove the keyboard flex cable (10 minute job for someone into this sort of thing)
Full instructions on keyboard removal can be found in the hp manual for your model in the support section of hp website.
You will also find youtube videos of the process which you may find helpful.
Your best option is getting one of your technically minded friends do the job & use a usb keyboard until you have sourced the replacement keyboard panel & arranged for someone help fit it.
Like my post? Click Kudos (thumb+) to show appreciation. -
I have a 4 year old Mac Book. I can't insert a CD. When I try the CD goes almost 1/2 way in and then hits something hard. Using Terminal and "cdutil eject" indicated that there was no disk in the drive.
Any sugggestions? Or should I plan on replacing the optical drive?See if the pevious discussions listed on the right side of this page under the heading More Like This help.
-
The MIDI in is working fine, and Logic shows that midi events are ocurring in the channel. But the "out" light on the MOTU Fastlane interface is not blinking. If I change to a software synth the midi out works fine.
I'm sure there's a little "button" I don't have set somewhere.
Thank you,
MarkDo the external MIDI tracks have either Port A or B of the Fastrack selected as MIDI Out?
Does this happen on all projects?
Have you changed anything lately?
pancenter- -
Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?
When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it. Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off. If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out. Hope this helps you out.
-
My Ipad 2 mail system was not working so i tried to power down to restart again but it has refused to power down and it also refuses to come on. i have held the power button for over a minute but there is no response.
Have you tried basics from the manual?
Restart 0- you tried.
Reset?
Restore?
iPad 2 User Guide (For iOS 4.3 Software) -
My imessages worked on minute and the next it would stop working so I updated to ios7. Now it does not work at all. Now I am unable to do any back up on this phone. What else can I try?
Burrning-Bunny I have tried that I even went to the Apple store and they told me to reset my password and try again, but that did not work. I reset the time and date, tried to refresh settings. getting frustrated to say the least.
thanks. I appreciate any help though. -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards. -
My other apple store ID ([email protected]) password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn’t receive any email from apple
You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?
-
My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?
I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/ -
The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?
I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some. -
I just got a new laptop and itunes is not working I have tryed to reinstall it and do alomst everything and it's still not working. Help?
What do you mean "not working"? That could mean multiple different things.
If help is desired, be as specific as possible. -
Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
LoïcAccordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit -
I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Drag and drop not working. When trying to move a cell or icon the shadow of the cell or icon being moved appears under the cursor but can't be released causing a freeze of function within the program. Happens in finder numbers, firefox, and when trying to move any file from the downloads folder.
This is a serious pain.
Please help.
WBYes, all I can tell you is that Finder does not have that function in ML. Your system is "working as expected".
You can file feedback here.
Maybe you are looking for
-
Mail dead on upgrade to 10.5.6
I just upgraded my G4 Powermac from 10.4.11 to 10.5.6, using the Mac pack which provides the new OS, iWork and iLife. I chose to archive and upgrade, and everything seems to be working except Mail, which doesn't open a window without my opening it fr
-
IPhone 4s back camera not working even after buying new iphone 4s
Back when the ios 6 updates were coming out in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone and finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was
-
How can i recover my rescue email
pls. help me to rescue my security question or rescue email so i can purchase on apple store i already redeem 15 usd and put the code but suddenly they are asking for the security question i already forget my answer on that and i cannot remember my r
-
Dump Error in MAterial Consumption Report
Hi all Gurus [1] I need help from your side i am doing one material consumption report in that i did all thing but it is giving me dump error while i was using sort in to ALV so please any one help me out this ....... [2] I am Printing sum of quanti
-
Can't open office files located on a windows server fileshare
Hi TechNet / Office for Mac Community, re: can't open MS Office files located on a windows server file share Is anyone else experiencing this issue and/or have a fix? Details: Clients: Mac OS X 10.6 / 10.7 / 10.8 / 10.9 File share: Windows Server 200