Voice Metrics and Radio Measurements

Ok, how do I use these exactly? We're running 4.1.185 on the controllers at the moment and 4.2.81.0 on WCS.
First with the Voice metrics, I get no data on my 7920 and 7921 phones? And with the Radio Measurements if I attempt to use it with a client, any of the options I receive this error "SNMP Operation to the Device Failed: Attempt to set conflicting attribute value" ??
Thanks for your replies

@wquatan - It also doesnt mean that what the user wants is correct and proper. For example, phone is not supposed to be answered in a car without handsfree. In fact this is illegal in some places. So of course, why would they make it easy for the phone to be answered in such a way? Not only is it irresponsible of the manufacturer to do so, but dangerous as well for the people on the street.
In the case of allowing the user to change music volume when navigating, I think its right that navigation take precedence since its the more important function which is running at the moment.
Also, I second the opinion that musc+navigation+driving is a BAD combination.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

  • Can't get radio measurements on WLC 2500 to work

    Hi all,
    I have 2 lightweight APs (AIR-CAP1602I-E-K9) connected to a wireless lan controller 2500. I am trying to enable radio measurements, however after configuring the WLC, RM status is still reported as disabled. I used this document http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010000111.html#ID2037  to configure the WLC.
    Here is my current config:
    1. CCX-Lite is enabled
    > show run-config
    CCX-lite status ............................ Enabled 
    2. AeronetIESupport for the wlan of interest is enabled
    > show wlan 14
    CCX - AironetIe Support.......................... Enabled 
    3. RM is enabled globally
    > show advanced 802.11a ccx global
      802.11a Client Beacon Measurements: 
        enabled with (interval=60) seconds
    4. RM is enabled for the AP
    > show advanced 802.11a ccx ap AP_1 
      802.11a Client Beacon Measurements for Cisco AP: 
        enabled with (interval=60) seconds
    However, when requesting the RM status on the controller, every type of measurement is shown as disabled:
    > show ap ccx rm AP_1 status
    B Radio
      Beacon Request................................. Disabled
      Channel Load Request........................... Disabled
      Frame Request.................................. Disabled
      Noise Histogram Request........................ Disabled
      Path Loss Request.............................. Disabled
      Interval....................................... 60
      Iteration...................................... 0
    A Radio
      Beacon Request................................. Disabled
      Channel Load Request........................... Disabled
      Frame Request.................................. Disabled
      Noise Histogram Request........................ Disabled
      Path Loss Request.............................. Disabled
      Interval....................................... 60
      Iteration...................................... 0
    When checking the client RM status, I get the following results:
    > show client ccx rm Client_MAC status
    Client not in the unicast rm list  
    > show client ccx rm Client_MAC report beacon 
    Client not configured for ccx rm 
    > show client detail Client_MAC
    Client CCX version............................... 6 
    CCX Foundation Service version................... 1
    CCX Management Service version................... Not Available
    CCX Voice Service version........................ Not Available
    CCX Location Service version..................... Not Available
    My questions are:
    1. Is there an extra config on the WLC to enable Radio Measurements?
    2.  Why is the client reported as having RM disabled?
    3. Are there any additional client configurations that must be done?
    Thank you.

    Welcome to Discussions, heather2910
    heather2910 wrote:
    when i click on a contact and then click on facetime it says that the contact is unavalible how do i get it to work?
    (1) Consider the FaceTime troubleshooting suggestions in this article:
      http://support.apple.com/kb/HT4319
    (2) If your FaceTime works to some of your FaceTime friends but not to others, those who show "unavailable" may merely not have their FaceTime turned on so they can receive calls.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.7); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.7)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.3.1

  • My iPhone5 won't reconnect to my Subaru Forester Bluetooth radio. I have to go and delete the iphone from the radio and pair the phone and radio everytime. I never had this issue with my samsung

    I have a 2012 Subaru Forester and when I get in, my iPhone5 won't connect to my Bluetooth radio.  I have my Bluetooth radio knows about the phone, but the iPhone5 just won't connect. I have to go and delete the iPhone5 from the radio memory and then pair the radio & the iPhone5 again, then it connects and works great until I shut off the car. Then when I get back in or restart the car I have to go through this all over again. Anybody got any ideas? It is driving me crazy and i just got my iPhone5 a week ago. Now I am not a real iPhone Savvy user, so it may just be something I have not set properly. So can some one Help? Please!

    My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
    It did my head in for months.
    Thanks guys, because of you, I worked this out.  My Forester needed the "handsfree" setup, not just a Bluetooth pairing.  Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
    But only to initiate the hansfree component.
    From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup.  Because I'd done this originally, my old phone was in here.  Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
    Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone.  Now it auto connects everytime I get in the car
    Woohoo.
    Johnny

  • What is "Radio Measurements" option in E71's WLAN ...

    Hi guys,
    My question might be a little bit eccentric and perhaps some WLAN gurus can answer . I've found an option in WLAN "Advanced Settings" of my E71, called "Radio Measurements". Anybody knows what is its function and in which occasion shall I disable it (it's enabled by default).
    Thank you in advance.
    Solved!
    Go to Solution.

    http://www.cisco.com/en/US/docs/wireless/wlse/2.5/user/guide/radio.pdf
    Articles posted courtesy engadget
    keep us updated about the progress.... if u like wat I have to offer then click on khudos.

  • SP and Radio

    A local radio station here in Atlanta is taking one of its more popular shows, video taping the show where it is held, a bar and then will upload it to Google and You Tube, perhaps iTunes!
    The show was recorded and the sound modified for broadcast, however, because of the additions to the audio track, such a snippets of voices, songs and deletion of certain comments, the track does not match the video. Even the raw audio the engineer modified to some degree to nothing really matches the video. So I am left with a recording of the show provided off the shotgun mic on the PD150 and another device, a lavelier mic which set on the table. So I have a tracks that match the audio but the voice levels are low and the bar noise really drowns the voices except for the moderator who was closest to the mic. I have Soundtrack Pro and have pulled the sequence into the program.
    Are the any suggestions from out there as to which effects would give the best overall performance in such a situation? I need to raise the voices but keep the bar noise at a minimum. I know that it will not be as good as if it had the seperate tracks out of the boards, which I will have next time, but any suggestions would be appreciated. Presently I am going through the manual reading.

    Hi Myles
    I appreciate you did it yourself and hope it worked out well. Could you share with us what your techniques were to minimise background noise?
    Thanks
    Rounik

  • Follow up on JB versionJRO03O and radios i515.10 vFF02/ I515. FG02

    JB versionJRO03O and radios i515.10 vFF02/ I515. FG02
    The developers i know who have been using this versionof JB and new radios report everything seems to be working great no lost signal or dropped calls
    looks to be ready for primetime now we need verzion to push to all .  But i suspect S3 will gt JB first
    This is an official OTA but only released to those who had 76Q ICS.
    With a little research you will see how well it works

    Android police is where I have found most with links to the needed
    software.
    On Sep 6, 2012 9:00 PM, "mariomerendino" <[email protected]>

  • How do you sync voice memos and make CD's of them?

    How do you sync voice memos and make CD's of them?

    When you sync the phone with your computer voice memos are copied to your iTunes library with the Genre "Voice memo".
    To burn to CD you do it the same way you would any music; create a playlist of the memo(s), the right click on the playlist and choose "burn to CD".

  • How to use Checkbox  and radio buttons in BI Reporting

    Hi BW Experts,
       My Client has given a report in ABAP format and the report has to be develop in BI.It contains Check boxes and the radio buttons. I don’t know how to use Checkboxes and radio buttons in Bex.For using this option, do we need to write a code in ABAP.Please help on this issue.
    Thanks,
    Ram

    Hi..
    Catalog item characteristic
    - Data element
    - Characteristic type
    Entry type
    List of catalog characteristics
    Designer
    Format (character)
    Standard characteristic
    Alternative: Master characteristic
    (used for automatic product
    assignment)
    Simple entry field
    Alternatives:
    Dropdown listbox or radio button
    list

  • How to realize Checkbox and Radio Buttons based on Attributes in JHeadstart

    Hy@ all,
    I try to redevelop the Summit Forms Demo in ADF.
    The module "ORDER" contains, among other things, a checkbox and radio buttons based on database columns(VARCHAR2).
    The column(checkbox) named PAYMENT_TYPE contains the values CASH and CREDIT and the column(radio button) called ORDER_FILLED contains the values Y and N.
    After creating the business components, I set in JHeadstarts Application Definition the Display Type of these two attributes to checkBox and radio-horizontal.
    I created a dymanic domain for the radio-horizontal and a static domain for the checkBox.
    The radio-horizontal within the dymanic domain works nearly correct.
    I set the Data Collection in this dynamic domain to the required Group and the Value and Meaning Attribute to the necessary Attribute.
    Within the JSF- Page the values are shown right but unfortunately there are too many radio buttons available. Instead of displaying the two radio buttons CASH and CREDIT were many CASH and CREDIT radio buttons shown.
    I can´t find any solution for this case.
    The problem with the checkBox is that therfore a static domain is required but I want to show the value of the checkBox based on the described attribute, like the handling of the radio horizontal.
    But I don´t know how to implement this, if it is possible.
    I´m using JHeadstart v10.1.3.2 and I´m pleased about any reply or solution.
    Best regards
    Chris

    Chris,
    If you run the application module tester, and query the view object usage underlying your dynamic domain, how many rows does it return? It should return only two rows, one for CASH and one for CREDIT. If more than two rows are returned, your query is wrong.
    What is the problem with using a static domain for the checkbox?
    Steven Davelaar,
    JHeadstart Team.

  • Is there a way to turn on/off 3G for iPhone 4S with a voice command and/or without Siri?

    For example, I almost always have 3G turned off on my iPhone 4S so that I won't use any of my cellular data when not needed. However, when I'm driving, and I need to use Maps for directions, it would be nice to unlock the iPhone by voicing my PIN and using a voice command to turn on 3G and accessing Maps.
    Is there already a way to do this? I know that accessing applications via Siri will be capable when iOS 6 is released.
    Voice Control should also be set to the default voice-command option when Siri is either off or when the iPhone does not currently have access to the internet. Because Siri requires the internet, Voice Control could be used to unlock the iPhone and turn on 3G. Once 3G is turned on, Siri can take over (if Siri is turned on in Settings) to access an application, like Maps. When finished, there should be a voice command that will "turn off 3G."
    So, here's how the whole process could work:
    1) hold Home button to access Voice Control and respond with PIN to unlock the iPhone - "one, two, three, four" or "twelve, thirty-four" for PIN 1234 (I'm not sure if people would want to say, "one thousand, two-hundred, thirty-four")
    2) once unlocked, it should intuitively stay on Voice Control so the user can say "turn on 3G"
    3) if Siri is enabled, it will take over Voice Control; if Siri is disabled, Voice Control will remain active, bu you should also have the voice-command option to "turn on Siri" (now that 3G is on)
    4) a voice command to "launch Maps" - I know that this will capable with iOS 6
    5) when done, hold Home button and voice a command to "turn off 3G" via Siri
    Could this feature please be integrated into iOS 6?
    In terms of driving and accessing Maps, this would be a lot safer and a lot easier.
    Thanks!

    Tell Apple:
    http://www.apple.com/feedback/iphone.html
    We're all users here, just like you.

  • How can you create a voice recording and save it as an mp3?

    I want to create a voice recording and save it as an mp3.  How can I do that on the MAC?  Right now I can only think of recording the voice in iMovie, but it does not have a choice to save as an mp3.

    Rather that iMovie, you may want to check our Audacity.
    It's a free, open-source audio editor and recorder.
    You can easily save a recording as an MP3.
    http://audacity.sourceforge.net/
    Matt

  • Issue with HOST "metric and policy settings"

    Hi All,
    I have a OMS and EM Reporsitory installed on a linux machine I have connected four agents(4 hosts) to this grid control. For one perticular host I could not see any predefined metrics. The steps I followed are I have opened a host and went to "Metric and Policy Settings" and there I could not see any predefined metrics like Log file patteren match metrics and CPU utilization metric etc. For checking I have access "All Metrics" option there I can see all predefined metrics but their "collection Schedule" set to Real time-only. I think this is reason why I am not able to see these metrics in "Metric and Policy settings" for customization. How can change the Collection Schedule of these metric. This case is only for that perticular host other hosts are fine and showing metrics and allowing me to customize thresholds values.
    As someone suggested I stopped and cleared the state of the agent and then started the agent again but the problem is not solved. Please suggest me a solution.
    Regards,
    Ashok Chava

    You could create a MONITORING TEMPLATE of the metrics you want to collect and base it off of a host that has the Metric and Policy Settings SET and apply it to this perticular host.
    Have you checked Setup> Management Pack Access> for HOSTS?

  • IPod is using voice over and won't scroll. What setting did my child click? It will allow me to use voice control, but i need to know what's wrong first so I can give the correct command.

    My daughter's iPod is using voice over and won't scroll. What setting did my child click? It will allow me to use voice control, but i need to know what's wrong first so I can give the correct command.

    VoiceOver is an Accessibility feature while Voice Control allows you to control the Music app via voice.
    To turn off VoiceOver triple click the Home button and go to Settings>General>Accessibility and turn it off. Use three fingers to scroll if necessary.
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)
    iOS: Getting started with VoiceOver for accessibility

  • How to put Check Boxes and Radio button in Smartforms

    Hi all,
    How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use.     
    regards,
    Mohsin

    u can declare the checkboxes or radiobuttons whatever in driver program and pass the same to ur form...

  • DAQ vi to perform digital write and read measurements using 32 bits binary data saved in a file

    Hi
    DAQ vi to perform digital write and read measurements using 32 bits binary data saved in a file
    Two main
    sections:
    1)     
    Perform
    write and read operations to and fro different spread sheet files, such that
    each file have a single row of 32bits different binary data (analogous to 1D
    array) where the left most bit is the MSB. I don’t want to manually enter the
    32 bits binary data, I want the data written or read just by opening a file
    name saves with the intended data.
          2)     
    And
    by using test patterns implemented using the digital pattern generator or  build digital data functions or otherwise, I need to
    ensure that the     
                binary data written to a spreadsheet file or any supported file type
    then through the NI-USB 6509 is same as the data read.
    I’m aware I can’t use the simulated
    device to read data written to any port but if the write part of the vi works I
    ‘m sure the read part will work on the physical device which I’ll buy later.
    My Plan
    of action
    I’ve
    created a basic write/read file task and a write/read DAQ task for NI USB 6509
    and both combine in a while loop to form a progress VI which I’m confuse of how
    to proceed with the implementation.
    My
    greatest problem is to link both together with the correct functions or operators
    such that there are no syntax/execution errors and thus achieve my intended
    result.
    This
    project is one of my many assignments for my master thesis, so please i’ll
    appreciate every help as I’m not really efficient with LabVIEW programming but
    I prefer it because is fun and interesting if I get to know it.
    Currently I’m
    practicing with LabVIEW 8.6/NI DAQmx 8.8 Demo versions and NI USB 6509
    simulated device.
    Please see
    the attached file for my novice progress, thanks in
    advance for the support
    Rgds
    Paul
    Attachments:
    DIO_write_read DAQ from file.vi ‏17 KB

    What does your file look like?  The DAQmx write is expecting a single U32 value, not an array of I64. 
    Message Edited by vt92 on 09-16-2009 02:42 PM
    "There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

Maybe you are looking for