Voicemail indicator (symbol) does not show on 6111

I have no indication of when a voicemail message is left on my 6111!
Service provider is Orange
Has anyone else had a similar problem???

Did this solve the problem?
I have 2 issues with my phone and this is one of them. I tried this fix and it did not work.
The other problem I have is that when I recieve a call the display does not show the caller ID, it only displays 'call'.
My handset is running the firmware below:
Nokia 6111
V03.41
27-10-05
RM-82
I am on the Orange network but the phone is an unconnected handset if that helps.Message Edited by este123 on 14-Mar-2006
10:23 PM

Similar Messages

Changes made in symbol does not show?

Hi, I recently started working with adjusting a template with flash 8. Everything went smoothly except for one thing. I changed one certain symbol in my libray and when i exported the movie (after changing) i dont see the changes in my website. Other buttons, symbols etc immediatly show there adjustments and this just keeps on remaining the same? Anybody knows what to do with this? Please reply!

Hi,
I tried clearing the cache before. No success. The symbols that does not
seem to change are on the website. I searches the whole library and the
page i want to change i nowhere to be found (except for the symbols that
does not show the changes). I hope to hear from you (and anyone) soon!
2012/2/17 kglad <[email protected]>
Re: Changes made in symbol does not show? created by kglad<http://forums.adobe.com/people/kglad>in
Flash Pro - General - View the full discussion<http://forums.adobe.com/message/4213017#4213017>

The 3G symbol is not showing up on my home screen and I cannot browse the net, any suggestions?

The 3G symbol does not show up on my home page and I cannot browse the Internet or receive mail. Any advice?

reset the iphone
1. press the wake/sleep button the top until you get the red slider
2. Slide to power off
3. Wait for phone to power off (you get a spinning gear icon for a while)
4. press the wake/sleep button to turn in back on.
if that doesn't work reset network settings
1. Go to Settings->General->Reset->Reset Network Settings
2. Confirm that you want to do this and the phone will restart itself
if that doesn't work restore the phone in iTunes, but you will want to sync all of your data before you do that.

HT3529 My iPhone is showing that I have one unread messages but when I click on it, it does not show this so-called unread message. How do I go about getting rid of this symbol, or find this unread message?

My iPhone is showing that I have one unread message but when I click on it, it does not show this so-called unread message. How do I go about getting rid of this symbol, or find this unread message?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Iphone 6 does not show I have a voicemail

My Iphone6 does not show I have a voicemail.

10R wrote:
My voicemail notifications will not workt if I shut off my cellular data, I will never get my voicemails....even after I turn the cellular data back on. When I turn cellular data back on I get any text messages I missed, but no voicemail. I have to reset my network settings to receive the "missing" voicemails. Looking for a work around that does not require me to keep cellular data on all the time.
You shouldn't have to reset network settings, but you may have to reboot your phone by holding HOME and SLEEP until an Apple logo appears. Or turn the phone off, and then on. The reason is that a notification is sent over cellular data in real time, then the phone downloads the voicemail over cellular data. But if cellular data is off the notification is never received and the download doesn't happen. When the phone recovers from power off or a reboot it checks to see if there are any pending visual voicemails, but otherwise it doesn't check. The phone is not designed to be used with cellular data off, so some functions will not work correctly if it is off.
It is working the way it was designed.

Does not show charging symbol

I turned on my wife's macbook air this morning to pass her some pictures. The battery was at 17%, so I plugged in the charger. the symbol does not change to the plug, and for a brief moment a message comes on that says "not charging". Light on plug is orange. I also tried my macbook pro charger and got the same results. Back with the right charger, I rebooted it.... no change. In the 15-20 min it has been sitting here plugged in, the battery percentage has gone up to 34%, but it still shows not charging.
What do I need to get the "plug" symbol back.

Try a SMC reset. Usually helps this issue.
http://support.apple.com/kb/HT3964
Regards,
Captfred

Battery percentage indicator does not show time remaining in ML as it used to show in Lion!

Hi everyone!
I upgraded to ML and have noticed that the battery percentage indicator does not show the time remaining (charge). you need to actually click on it to see how much time the battery is going to last. OS X Lion did not have this problem.
Is it just for me or is it a bug that Apple needs to fix?!?
Ravi Reddy

See:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

When charging from a wall socket the iPod does not show the battery charging or the flash indicator in the charge level icon . Both these do appear when charging from my Mac. Is this normal?

When charging from a wall socket with a mac recommended charger, the battery icon in the top right hand corner does not show the flash sign and the running battery level is also not shown . Is this the normal situation?

Hi,
so when you hold the menu+select buttons it won't reset - show the apple logo?
If you can get the apple logo to show, then press the select and play buttons to put it into disk mode.
What happens when you connect it to the computer? Sometimes, you can see the ipod in disk management if you open itunes before connecting the ipod. Once itunes is open, select Edit/preferences. This will keep itunes busy so that you can read the ipod in disk managment.

BSP does not show up after installation of service pack 9 on BW 7.0

Hi,
We are working on netweaver 2004s.
We have a very simple BSP page, which has been developed in BW box. Its just used to load flat files to the application server.
It was working well when we were at service pack 8. Recently we have installed service pack 9 and this BSP page either through portal or directly in web-browser does not show up at all i.e all we see is a blank page and the status bar of the browser keeps running forever.
Could you please advise what has gone wrong and is there a fix to this.
Note: other 2 BSP pages in the same BW system are working fine.
kind regards,
Waseem.

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

Iphone 4 is not recognized by itunes, will not sync, charge indicator icon does not come on when hooked to usb charger

When I hook my iphone 4 up to itunes, it does not show up on the left. It will not sync, and the lightning bolt charging indicator on the phone does not come on although it appears to be charging over time because the battery level has increasd.
I am running Mac OS X, up to date as is my iTunes. I tried the steps from the website troubleshooting guide and nothing worked.

Additionally, charging through other devices such as my car charger has the same symptoms.

"@" symbol does not appear in recipients SMS messa...

When I type the message on my MAC (OSX10. or on my iPhone 4S (os6) it looks good but the reciepient does not see the "@" symbol. It instead shows as a "Space" I have contacted the skype team by a chat window and went through to the etchnical support person who was still unable to provide a solution. I have sent screen dumps of all this to them 10 days agao but have not had a reply. I hope the community can help. I want to sent an SMS message advising of my email address but as the "@" symboll does not appear, I can't use this method. I have tried to send it to my iphone 4S from my mac and also tried to send it from my iphone 4s to my wife's iphone 3gs. Each time the "@" sysmbol appears fine on the sent side but only shows as a "Space" on the reciving side.

I am having this same problem when I send a text message to a customer I have been symply been ending my text with my email address so they have a means to reply but unbeknownst to me it has sent with the @ symbol my end but not recieved. Why?

File's Owner does not show methods in Interface Builder 3.2.6 but the class is set correctly and the nib on the lower left is green

Hi, I'm trying to make my first IPhone app. After having problems with interface builder the first time I coppied the code directly from a tutorial in case I made any mistakes. I saved the program, and re-opened the .xib file. Right clicking File's Owner does not show a list of methods. I've been looking around for solutions for this but have not gotten anything to work. I tried deleting the default .xib and creating a new one through file-> new file. This did not help. I did notice that File's owner was showing up as a light blue cube apposed to a yellow one now and found that a bit odd but otherwise nothing changed. I opened the library menu and selected helloWorldiPhoneViewController so it would show up in the view port. I set the class field of File's Owner to hellowWorldiPhoneViewController. File's Owner still does not show methods when right clicked or when a line is dragged over a button. I read somewhere that the color of nib on the lower left of the viewport may indicate a problem, but it is green not indicating any issue. Every solution I found for someone else seems nto to work for me and I don't know how to continue.
here is the .h file just in case:
// HelloWorldViewController.h
// HelloWorld
// Created by Paul Peelen on 2011-03-14.
// Copyright 2011 9697271014. All rights reserved.
#import <UIKit/UIKit.h>
@interface HelloWorldViewController : UIViewController {
UILabel *textLabel;
@property (nonatomic, retain) IBOutlet UILabel *textLabel;
- (IBAction)changeTheTextOfTheLabel;
@end
I'm trying to connect changeTheTextOfTheLabel to a button and textLabel to a label

You need a parameter for an interface builder method. The type should be id and the name is typically "sender". It would look like this:
- (IBAction)changeTheTextOfTheLabel: (id) sender;
Be careful about those tutorials. Many are ancient and do not correspond to current Xcode behaviour.

VC - new characteristic does not show in PS BOM explosion / CU50

Hello World,
we added a new Characteristic to a class that is basis for a Material BOM explosion. In transaction CU50, the new characteristic can be configured by selecting its single values and the result shows up correctly in the BOM explosion.
Unfortunately, it is does not show up in the BOM explosion result of the SAP PS module @ Network Activity where the explosion is done concerning to our biz process. All other characteristics explode properly in the PS BOM explosion. I have no clue about the difference of the newly added characteristic is that makes it behave differently (only) in the PS system, not showing up in the result.
In CU50 @ Menu Extras @ Result I found a trace of the difference, but cannot interpret it due to a lack of documentation of the resulting screen that is entitled "Configuration : Result". Here, in table "Detail List", only the faulty new characteristics show additional extra Dependency entries with a light green background that cannot be found with all other characteristics in the same table. These extra entries can be drilled down by double-click and produce a pop-up window that shows some status information and the dependencies source code.
Question: what do the extra entries of dependencies say, why are they shown and why not at other characteristics?
By understanding this difference I hope to find the reason why these characteristics are not exploded in the PS module (which is my primary question).
Thank you for a helpful answer!
Marcus

Hi Jong - Moon cho,
Please check following setting,
1.Consider setting the Individual/Collective indicator to 2. (MRP 4 view)
2.In order to get dependent requirements from the planning of configurable materials, components should not be configured with strategy group 70 or 59.
Also refer the bellow link
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
Regards
Girish

Af:statusIndicator does not show busy icon when a command button is click

Hi Guys,
af:statusIndicator does not show busy icon or motion when a command button is click
I am working on an excel data upload functionality on .jspx page. I use “af:inputFile” file uploader to upload an excel file then process the data and store it as a list of objects in memory and display it in “af:table” table
I added “af:statusIndicator” to the page to show the user that the page is progressing while the data is uploading and when it is saving the data to the database.
In this case, when the “af:inputFile” is clicked to upload the excel file - the status indicator shows a progress icon (movement) which is expected and is good. However, after the data have been display in the table when I click on a command button that saves the data to the database – I expected the status indicator to start its busy motion but that is not happening. Whereas, the command button grayed out and is disable when I clicked the button until the operation is completed.
Is there any way to start the statusIndicator when a command button is clicked?
I tried the following options
*<af:statusIndicator id="si1_uploadStatus" partialTriggers="pc1:cb1 pc1:table"/>*
Where pc1:cb1 is the command button and pc1:table is the table
*<af:commandButton text="Submit Uploads" id="cb1"*
*disabled="#{!viewScope.batchUploadController.allSavable}"*
*partialTriggers="::infFilePath"*
*action="#{viewScope.batchUploadController.saveUploadedData}"*
*blocking="true"/>*
Thanks,

Can somebody please address this?
Thanks,

Ldd does not show dependency on libC/ libCrun or libCstd

When I do an ldd on my executables (built using WS6U2), it does not show that it depends on libC/ libCrun or libCstd. But the executables use the iostream. More over, one of them fails with the below message;
ld.so.1: Rules: fatal: relocation error: file /opt/versant/cur_rel/lib/libcxxcls.so: symbol __1cDstdEcout_: referenced symbol not found
I initially thought the libCstd is not picked up as its path was not set in LD_LIBRARY_PATH. But setting it up right did not fix the issue. I finally had to preload libCstd using LD_PRELOAD to get the executable run.
My questions are;
1) Was the symbol __1cDstdEcout__ defined is some other library earlier and got moved to libCstd?
2) Why ldd does not list any of the C++ libraries (libC, libCrun or libCstd)?
3) What do libC, libCrun and libCstd provide? Does it provide any of the STL classes? I guess most of the STL comes from the headers itself (since most of them are templates)
Edited by: satheeshpaul on Dec 18, 2008 10:12 PM

satheeshpaul wrote:
2) Why ldd does not list any of the C++ libraries (libC, libCrun or libCstd)?Maybe because they are linked statically?
There's more reliable way to check:
$ elfdump -d a.out | grep NEED
       [0] NEEDED            0x215               libCstd.so.1
       [1] NEEDED            0x22d               libCrun.so.1
       [2] NEEDED            0x269               libm.so.2
       [3] NEEDED            0x243               libc.so.1If you don't see some library here, then a.out does not declare its dependency on that library. It might get loaded if some other library requests it, but in case of run-time support libraries, executable must declare dependency on those libraries (libCrun and such).
Now, it is very hard to determine whether or not your app was once linked with, say, libCrun statically. If you suspect that this is the case, you need to find a symbol unique to that library and try looking for it in a.out; if it is defined in a.out, it means that libCrun was linked statically; if you don't find it, well, it usually means close to nothing...
One more note: it is an error to mix statically compiled C++ run-time support libraries with their dynamic versions; in other words, if a.out was once linked with libCrun.a, for example, and libCrun.so gets loaded during program execution (it can happen for various reasons, one example is a.out is linked with some shared library that declares dependency on libCrun.so), things might get rough.
3) What do libC, libCrun and libCstd provide? Does it provide any of the STL classes? I guess most of the STL comes from the headers itself (since most of them are templates)You are right, most of STL comes from headers, but not all of STL. It's easy to find out what those libraries provide by looking at global symbols they export:
$ elfdump -s /usr/lib/libCstd.so.1 | c++filt | lessAlso, each library is described in User's Guide (highly recommended reading when you have particular question on Sun Studio C++ compiler):
http://docs.sun.com/app/docs/doc/806-7991
In short,
Crun - exception support, memory management, etc.
Cstd - STL
iostream - classic iostreams
C - Crun+iostream for compat=4 mode
satheeshpaul wrote:
I initially thought the libCstd is not picked up as its path was not set in LD_LIBRARY_PATH. But setting it up right did not fix the issue.Compiler records location of run-time support libraries when it build executable, so LD_LIBRARY_PATH is never needed unless you want to temporarily substitute one library for another for debugging purposes, for example.
satheeshpaul wrote:
I finally had to preload libCstd using LD_PRELOAD to get the executable run.You need to look at the way that executable was build; the problem must be in the build process somewhere. If you need help with that, please post command line used for final link step.

Voicemail indicator (symbol) does not show on 6111

Similar Messages

Maybe you are looking for