VOIP and J2ME

hi all,
I need to make a voip client for mobiles.. Can any1 tell me if it is possible to do this using j2me. Secondly i want to know if i can perform call control in j2me as if a call comes in i want to automatically terminate the call or forward it to some other number...Pls help me it's urgent

hi all,
I need to make a voip client for mobiles.. Can
any1 tell me if it is possible to do this using
j2me. Not unless your mobile support some kind of UDP api. Most devices don't
Secondly i want to know if i can perform call
control in j2me as if a call comes in i want to
automatically terminate the call or forward it to
some other number...Pls help me it's urgentThat is not possible.

Similar Messages

Mp3 and j2me supporting reliance mobile

hi,
if anyone know abt mp3 and j2me supporting Reliance phone in market.if so please give me the link where to get teh details I already checking it with reliance website and i want more information please help me.
thanx in advance
laxmi

hi laxmi
i dont know did you check this URL
www.dadp.com
there is one forum also avail for the j2me and realience phone you will get all the information tehre
regards
[email protected]

Questions about VOIP and recording in Connect

Hi,
We have been using Connect for a long time, but have been doing the audio using AT&T teleconferencing. We were thinking about using VOIP for the webinars we do. I just have a few questions.
1. Is there a limit of the number of connections to VOIP like there is with the teleconferencing? Is there a point where the number on there could decrease the quality of the VOIP?
2. When we record the webinar, where can we save it to? Can we save it to our server?
Any help with these questions would be great. Anything else that would be good to know for doing VOIP and recording?
Thanks.
Lisa

We don't natively integrate with AT&T by the way - so you have to use Universal Voice in this case and set it up yourself. Not hard to do.
1. No limit on VOIP but we recommend using the optional SPEEX audio codec built into the Host Add-In if using VOIP a lot. It requires everyone to be using the Host Add-In though. Over 150 though and it might get unruly!
2. Recordings are saved to the Adobe Connect Central portal that every customer has for their rooms. You can create a local copy from there and then copy the local copy to another server. It's a Flash file so you may need to convert it if you don't have a player.

Vonage VoIP and PIX 501

I have a SOHO currently using cable modem connected to the outside interface of a PIX 501. The inside interface of the PIX connects to a hub with 8 ports.I have 2 PC's and a LinkSys AP plugged into the hub. I have been looking at using Vonage VoIP. My questions are:
1) Is it possible?
2) Do I need to use a special fixup protocol or config?
3) Has anyone used Vonage VoIP and how is it working?
Thanks,
Paul Lane

Paul,
I have been using Vonage succesfully with a very similar configuration. You don't neet any fixups or special configurations to make this work.
My only suggestion is to connect your ATA to a switch port behind the PIX, as opposed to the hub.
Have fun!
Fernando Macias

Bluetooth communication between J2SE server and J2ME client

Hi everyone!
I'm new here in this forum...
I try to make a small project to my studies,
My project will include J2SE server and J2ME client.
I'm stuck in the step of finding the server with the wireless toolkit emulator.
I found this issue in old subject: here
I try the solution in reply 6 but I don't understand exactly who to define kvem.home, and I got this error:
" You must define the system property "kvem.home" "
maybe someone can help me and explain how to do that?
thanks!

Hello,
I want to find out how this can be done, too. I tried with
System.setProperty("kvem.home", "C:\\WTK2.5.2");but I get an error:
java.lang.UnsatisfiedLinkError: com.sun.kvem.jsr082.impl.bluetooth.BluetoothController.setSystemProperty(Ljava/lang/String;Ljava/lang/String;)I included these files in the build path:
c:\WTK2.5.2\wtklib\gcf-op.jar
c:\WTK2.5.2\wtklib\kenv.zip
c:\WTK2.5.2\wtklib\kvem.jar
and I import com.sun.kvem.bluetooth.*;
I'd appreciate any help.

Is a toll-free number mandatory for simultaneous VOIP and teleconferencing? How do we get a number, we're an academic institution?

Is a toll-free number mandatory for simultaneous VOIP and teleconferencing? How do we get a number, we're an academic institution?

page is here
http://ca.blackberry.com/support/tablets/playbook/contact-support.html
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Educational Use of JMF and J2ME WTS

Dear all,
I have tried to find legal information about education use of JMF and J2ME WTS. I want to install these two packages in the computers of a tutorial room for student use.
Would any kind soul please enlighten me where I can get such information?
Thank you.
Cheers,
Andrew Lui
The Open University of Hong Kong

Maybe from Sun? If it's not mentioned in the terms and conditions of the libraries or their download sites, I wouldn't know where else to get more information.

Why isn't there yet an available p2p embeded code for voip and video conference in Firefox??

why isn't there yet an available p2p embeded code for voip and video conference in Firefox??

So, the upload time will vary on internet connection. If there is an issue with how fast it is uploaded you can check if prefetching is turned on, but this does not really affect uploading [https://developer.mozilla.org/en-US/docs/Controlling_DNS_prefetching Controlling DNS prefetching]
If you search for solutions, you will see a bunch of tweaks as well that may be helpful to your specific computer. [[Upgrade your graphics drivers to use hardware acceleration and WebGL]] to make sure you are all up to date as well.

VoIP and Data over 1300 Bridge

I have a customer who wants to link 5 out buildings back to the main network. I have proposed using the new 1300 series bridges and have already verified clear line of site from the root location to all remotes.
The customer wants to run VoIP and data on the links. They expect about 3 phones and 3 computers at each location. Each location will have a 3500 series switch powering the 7940 phones.
Is there a maximum number for running the VoIP of a multipoing bridge setup?
I know I will need to setup QoS on the bridges. I just cannot find any documentation to support this setup.
Seth

Thsi document should help explain the Quality requirements for Wireless devices,
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a00802091be.html

SVG Tiny and J2ME?

Is there any support for SVG (tiny or basic) in the standard libs or are you forced to use 3:rd party libs (alternatevly creating your own)? Since I havn't found it I'm guessing that your stuck with third party libs or the diys-rule but quite new to j2me and i havnt quite got the hang of all the diferent apis provided. Anyway, would be greatfull if anyone could straighten my questionmarks.
Best Regards,
John

Hi,
I'm currently working with SVG and J2ME and I've seen many products...but I think that TinyLine is the most useful (if you are looking for something free).
There's also a jsr, "Scalable 2D Vector Graphics API for J2ME" (jsr 226)
http://www.jcp.org/en/jsr/detail?id=226
maybe you can find it interesting
Another link, containing some interesting hints about Mobile SVG
http://www.xml.com/pub/a/2004/08/18/sacre.html
I don't know if I've told you news or not...hope to have been helpful :-)
bye
melian

Conference bridging between VoIP and GSM calls

Hello, Can E61/E62/E50/E70 do conference between one call that's running on GSM and second call running through SIP client on VoIP? Thanks, Bilal

I tried to connect the GSM call to VOIP call on E72, but it has not happened.
I presume this may be the case, also there may be a solution for this.
VOIP Connection:
For VOIP calls the network uses an existing external IP address to transfer the information from the a server. The information received vide VOIP shall be transformed into voice which enables us to here the data conveyed by the server.
GSM Connection:
For GSM calls the network uses the intermediate service provider slot to convey the information as a signal throught the network. The signals are the direct output we hear as sound.
By my observation, in my mobile, the two network actions (VOIP and GSM) can be performed instantaneously or simultaneously.
The mobile needs a medium to convert either the GSM output signal (audio) to Internet packet data (bytes) and the VOIP software installed in mobile should recognize the same audio as an input and allow for a conference call.
or
VOIP call get converted into GSM signal.

VOIP and Codewords on HFC

I'll make it short and sweet! I have a customer that has a 6Mb P2P connection over our HFC network. They're utilizing the circuit for Prioritized VOIP traffic and stated they are using DSCP. They also use the circuit for their general data. Our network is seeing ~.0065% Correctable CW's, and 0% Uncorr CW's.
My main question for voip and codewords is: How is the VOIP traffic affected by Correctable CW's in general? WIll the VOIP service drop those packets that were corrected by FEC regardless as they come in due to the small increase of latency/jitter?
Thanks for any insight to this matter in advance!

WICs in the 1700 range:
Voice over DSL (VoDSL) using VoATM AAL2 or AAL5 (2600/3600) and AAL5 only (1700) technology is supported. This requires the use of separate PVCs for voice and data. VoIP over DSL will be supported in a later release together with the QoS features necessary for this solution.
http://www.cisco.com/warp/public/cc/pd/rt/1700/prodlit/ads17_ds.htm

Voip and IPCC

Hi,
This question came from our CSC Facebook community.
Karthik Ayyappan Hey Any one having Experience with Voip and IPCC let me know
I have a doubt on ICM

Many of us in this community have exerpeicne with this. What's your question or doubt?

VoIP and Video capacity planning

For 1000 users, what is the bandwidth for backbone to run VoIP and video?
Thanks

the above link is very good as it pertains to 'per call bandwidth consumption'
you may need to use a little more to find your answer such as a capacity planning procedure(s). since you have voice and video, this will be two part.
(minding that video if used for all users will require much more capacity than the voice; possibly upto 50 - 100 times more depending on your use/needs)
some decent capacity planning providers, case studies and best practices are as follows:
42U - obtain a free capacity planning consultation.
http://www.42u.com/proj-eval.htm
nice case study by cisco on capacity planning:
http://www.writtenright.net/Portfolio/WrittenRightCaseStudy.pdf
(for do it yourself)
a very good 'best practices handbook' by wainhouse:
http://www.wainhouse.com/files/papers/wr-best-net-vnvoip.pdf

Javacard and j2me

hi all,recently i want to plan a project that is about
i want to make a connection between javacard and j2me(on pda)
i.e. a j2me game can communicate with javacard..
but i don't know has any existed solution ??
at beginning i only want to make project in the simulation environment (pda simulatior<->javacard simulator) ,i hope u can give me any solution that can communicate between pda and javacard
thx in advance!!

AFAIK the j2me (the MIDP profile) does not support smartcard communication
i.e. a j2me gsm phone cannot communicate with the sim card inside
unless something has changed in this subject recently
regards
Kuba

VOIP and J2ME

Similar Messages

Maybe you are looking for