VOIP phone not getting IP from correct VLAN

Hello,
(sorry not sure if it is a VOIP or Switch issue)
We are installing a couple of VOIP phones in a new office, the VOIP service is hosted and the phones are Yealink. Off these VOIP phones are PC, but both the phone and PC get an IP from the DATA VLAN, I want the VOIP phone to go on it's VOICE VLAN.
Here is an example of the port, it is a Layer 2 switch (2960x):
description PC & IP Phone
switchport trunk native vlan 10
switchport trunk allowed vlan 10,62
switchport mode trunk
spanning-tree portfast trunk
spanning-tree bpduguard enable
The trunk port:
interface GigabitEthernet1/0/24
description ROUTER-LAN
switchport trunk allowed vlan 1,10,62
switchport mode trunk
speed 100
duplex full
spanning-tree portfast trunk
Router:
ip dhcp pool Data
   domain-name gb.vo.local
   default-router 172.30.12.8
   dns-server 192.168.21.10 192.168.21.11
   option 66 ip 192.168.28.89
ip dhcp pool Voice
   network 172.30.212.0 255.255.255.0
   domain-name gb.vo.local
   dns-server 192.168.21.10 192.168.21.11
   default-router 172.30.212.1
interface FastEthernet0/1
description LAN
no ip address
duplex full
speed 100
interface FastEthernet0/1.10
description DATA LAN
encapsulation dot1Q 10
ip address 172.30.12.11 255.255.255.0
standby 1 ip 172.30.12.8
standby 1 priority 110
standby 1 preempt
standby 1 track 1 decrement 10
interface FastEthernet0/1.62
description VOICE VLAN
encapsulation dot1Q 62
ip address 172.30.212.1 255.255.255.0
Does it all look ok?
I can see the phones:
sh lldp neighbors
Capability codes:
    (R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
    (W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Device ID           Local Intf     Hold-time Capability      Port ID
IPPHONE             Gi1/0/14       138        B,T             0015.654c.6630
IPPHONE             Gi1/0/19       156        B,T             0015.654c.65f6
Thanks

All was all good, it was jus tthe network command missing:
ip dhcp pool Data
network 172.30.12.0 255.255.255.0
   domain-name gb.vo.local
   default-router 172.30.12.8
   dns-server 192.168.21.10 192.168.21.11
ip dhcp pool Voice
   network 172.30.212.0 255.255.255.0
   domain-name gb.vo.local
   dns-server 192.168.21.10 192.168.21.11
   default-router 172.30.212.1

Similar Messages

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue.

What do I do if I Switched to an android phone but Im not getting messages from apple users because of the I messages. I have already turned off my I messages on my old phone.

I Switched to an android phone but Im not getting messages from people with I phones because of the I messages. I have already turned off my I messages on my old phone.

http://support.apple.com/kb/ts5185

Iphone 5 not getting text from new numbers?

im on ios 7.0.4. Recently, ive been having the problem of not getting messages from new numbers. I receive all texts and calls from all current phone numbers ive ever had contact with. But for the past month, any new numbers that text me first, i do not receive them. But if i text and or call them first, it works fine. Which isnt always a convinence. They sent me screen shots of my number and their text; they all have different phones on different services.

Perk123, this is a text messaging mystery! I'm on the case. I recommend that delete all unwanted text messages on your device and power it off/on to soft reset it.
You will also need to advise your friend that has the AT&T iPhone to reset the network on their device. This can be done by accessing Settings >General >Reset >Reset Network.
Lastly your friend needs to verify if your contact has been set up to block calls and text messages from your mobile number. This option is located in Contacts >your contact> Block this caller.
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport

RFC problem: could not get functionname from XML requst (sic)

I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system. It's a very small simple interface, and it's all working until it tries to call the RFC. The error is
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
I've created an RFC channel, which is green in the adapter monitoring. The RFC imports without a problem, and appears in my interface mapping. My mapping program converts to the RFC message type (as evidenced in sxmb_moni. I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called.
Could anyone point me to what else I could check? I saw a post about the same error message, where the respondent found something in the logs which helped them Could you expand on what you found, and in which log please? Any pointers as to which logging options I could switch on and check would be gratefully received.
Regards
Alan Graham

Thanks for the responses.
I set up a communications channel of type RFC, which is
showing green in the adapter monitor. If I deliberately
break it, eg by changing the password, the adapter shows
as red in the monitor. I assume therefore that the
adaptor settings are correct.
The XML going to the adapter looks correct AFAIK. My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient. In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
Also, the interface determination SOAP header, in the MAIN section includes
[code]<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>D04</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
</SAP:Receiver>
These are the correct values for the RFC name and the namespace, AFAIK.
I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC. The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
Alan

Mails not getting sent from Receiver Mail Channel

Hi ALL
I have a File to mail scenario , I see chakred flag in SXMB_MONI ..but mail are not getting triggred from the Receiver mail adapter..
I gave the URL like this smtp://sxd123.abc.com
and the respective E-mail ID's
I dont see any message in the communication channel monitering also ..wht could be the reson.. ?
Thanks
Souz

Hi Dominic,
Since you are not seeing any entry in the communication channel (receiver), I think there is a problem with your configuration. Check whether you have used the correct channel (of type MAIL) in the receiver agreement.
Regards
Suraj

PO is not getting released from SRM

Dear Experts,
I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
(SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
Kindly let me know is there any t-code for enable communication between SRM and SUS?
I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type but
PurchaseOrderRequest_Out for PO transfer is not getting triggered in sxmb_moni in SRM.
Thanks in advance.
Regards,
Pawan Keshwani

Hi,
Thanks for your reply.
I have configured Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
(CCMS monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
I am configured ESOA Architecture in XI for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
Not getting any messege in SXMB_MONI in SRM.
Regards,
Pawan Keshwani

TS5185 Hi After I have report a junk message I coudl not get Imessge from other iphone. and could not send any message in blue color but green which need to pay for.

Hi After I have report a junk message to 7726, I coudl not get Imessge from other iphones. and could not send any message in blue color but green which need to pay for. Does Apple blocked my imessage ? I have checked the setting. imessage is on.
Thanks,
J

Make sure that your date and time settings and time zone are accurate (Settings - General - Date and Time). Reset your phone to 'Set Automatically' and then try signing in again - this worked for me. My date/time settings were not automatic (candy crush cheats!!).

Apps not getting moved from/to iPhone via iTunes

My wife is having problems with her iPhone and iTunes. Apps are not getting removed from the iPhone or are not getting moved to the iPhone from iTunes. Apps that iTunes says are there are not on the iPhone.
She has tried multiple times to remove/install and applied changed and synced, but nothing seems to change.
iTunes version 11.3.1 (2)
iPhone 4s IOS 7.1.2

Oh, wanted to share at least one workaround for those with the issue. You can at least access visit the itunes app and download your music that way and add it to the playlists on the phone. Just for some reason, iTunes won't synchronize most purchased music to the phone.

Im not getting pictures from my iPhone,or macbook to my iPad

Im not getting pictures from my iPhone or my macbook pro to my iPad from iCloud

Hi Sirmetro,
Thanks for the question. It sounds like you are having issues with Photo Stream on your iPad, is that correct? The resource below provides some troubleshooting steps for this issue.
Get help using My Photo Stream - Apple Support
https://support.apple.com/en-us/HT203511
I hope this information helps ....
- Judy

Characterestics is not getting displayed from ODS in Multiprovider

I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?

How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Could not get IOR from Domino Server while provisioning Lotus Notes

Hi all,
There are two servers that have OIM installed, development server and test server. From development server, we can
provision to Lotus Notes just fine. But for test server everytime when
provision to Lotus Notes. There will be an exception
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
From test server
I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
I can telnet to 10.3.100.61 63148
I can use connector testing program and it work fine
All configuration and jar files are the same as development server
There is no firewall or antivirus running in both systems.
Both server is virtual server using VMWare.
OS: Windows2003R2 Enterprise
DB: Oracle 10gR2 10.2.0.2
AS: Oracle AS 10g 10.1.3.3.0
OIM 9.1.0
Lotus Notes Connector 9.0.4.2
Thank you.
Satit
The error is as below
=================================================
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
08/11/11 11:24:26 Running setTimeoutParameters
08/11/11 11:24:26 Running Connect
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
     at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
     at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
     at lotus.domino.NotesFactory.getIOR(Unknown Source)
     at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
     at lotus.domino.NotesFactory.createSession(Unknown Source)
     at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
     at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
     at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
     at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
     at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
     ... 45 more
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
     at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
     at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
     at lotus.domino.NotesFactory.getIOR(Unknown Source)
     at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
     at lotus.domino.NotesFactory.createSession(Unknown Source)
     at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
     at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
     at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
     at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
     at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
     at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
     ... 46 more

check if DIIOP service is turned on at the Lotus Domino side...
Oleg.

Data not getting fetched from Quotation to Contract

Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael Appleby

Please add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG

HT1848 i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from it

i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from itunes.

See Recover your iTunes library from your iPod or iOS device.
tt2

VOIP phone not getting IP from correct VLAN

Similar Messages

Maybe you are looking for