Volume and brightness buttons don't work anymore

I did a complete restore from factory DVD and since then the volume and brightness buttons don't work anymore. I have an All-in-One AE1900. Anybody can help me fix this problem? Since I do not have the original keyboard anymore, I can't use the hot key combination to do it. Thanks for your help.

I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work. Sound seems to work fine. They work fine in Mac mode.
Any solutions?

Similar Messages

On/off Button and brightness buttons don't work in the Apple Cinema Display

I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI RADEON X800 GT Gecube 256 Mb DDR2.
Would yo mind telling me how can repair that? If I need something to repair o it is better to buy the new windows to avoid that problem.
Windows XP Pro ATI Radeon X800GT Gecube 256 Mb DDR2

Thank you very much. I didn't know this driver.
But the problem was when I was installing this driver, Windows said that it's imcompatible with windows XP.Is this normal? o I need to download a special edition for windows xp.

Sound and brightness buttons don't work, any suggestions?

Hi guys,
I just bought a MacBook Pro, and I can't control the volume and the bightness by the keyboard button. Do to so, I have ti to it by the icones in the top bar.
How can I set these hotkeys on my keyboard? Any suggestions?
Thank you and happy new year.

I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work. Sound seems to work fine. They work fine in Mac mode.
Any solutions?

Satellite U400: Need Vista install order and Control buttons don't work

I bought an Satellite U400-11T model with french windows Vista.
I want to change the french Vista to hungarian Vista.
Of course I bought a legal vista HUN and downloaded the drivers etc.
I am interrested in about the install order called installation instruction like at the XP models.
My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
Where can I switch on it or wich program must i reinstall?
Thanks
Schmid

Hi
The installations order for Satellite U400 should be as follow:
Windows Vista SP1
Intel(R) Chipset Module
Intel(R) Robson(Intel iMSM Driver)
Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
Conexant CX20561 Audio Driver
Marvell 8040/8055 LAN Driver
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem Driver
Netwaiting
Modem Region Select Utility
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver V7.1.62.2012
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer V2.02.00
Toshiba HDD Protection
TOSHIBA Face Recognition
TOSHIBA TRS Driver
Broadcom
HDMI Control Manager
Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
Bye

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?

A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

My Microsoft Intellimouse back and forward buttons don't work in Firefox, but they do in IE and in Windows Explorer. It used to work, now it just stopped. Why and how can I fix this?

Forward and back buttons don't work in Firefox but do everywhere else.

Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).

Volume and mute buttons do not work. no ringtone

Volume and Mute buttons do not work. Ringtones and alerts all silent. Sound working for music etc...

Sounds like you have a speaker fault and the phone would normally require servicing. But seeing as you have had the screen replaced, you will not be able to do this via the Genius Bar.
You will probably need to go back to the place where you got the screen replaced and ask them to look at the speaker for you.

HT1212 My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?

My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?

Changing your password won't help. It is a touchscreen so if 7,8,9 are not working then that part of the screen will not work if you were to get it unlocked.
TeeKnows is right. You need to contact Apple for a repair.

I've just downloaded itunes11 and my films don't work anymore!!!

Please help me!!! i've just downloaded version 11 of itunes and my video don't work anymore!

can't open mail after installing yosemite

HT1947 Video playlist and random and repeat play don't work anymore.

Video playlist and random and repeat play don't work anymore on my Apple TV (latest version 5.1.1 (5433)) with my iPhone.
My Mac Pro's (retina) iTunes also updated to the latest version 11.

i have been having the same problem too since 2-3 days and i am really worried... pls revert back asap. i bought my bbcurve 9300 in march 2011. n i dnt wanna lose it for sm othr new fon.. plz revert back..its really urgnt

Iphone 4S - Wifi and bluetooth buttons don't work

Wifi and bluetooth buttons don't work in my Iphone 4S. I have tried all the suggested possible solutions, but nothing seems to work. Can anybody help?

This is the only support document there is regarding the problem. If this does not help, you would need to make an appointment at the Genius Bar. http://support.apple.com/kb/TS1559

Satellite U500-1F5: eco and FN buttons don't work after BIOS update

Hi everyone,
I hope i can find a solution for my problems in here.
I bought a new Toshiba Satellite U500 (PSU9ME),
I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
I hope u can give me an answer regarding my problems,
I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
BUT
didnt solve any of my prob
still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
I hope Toshiba can find me a solution, coz I dont have the time to go the service center
Model U500-1F5 PSU9ME00D00XAR
Windows 7 (64)
Thanx in advance

Hello
At first just one comment:
*I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version.

MSI GX620 the turbo and eco buttons don't work

Hi Guys!
The eco and turbo buttons don't want to work anymore.When this problem appeared,I have had an other.When I push the button of camera, wireless or bluetuth,it dosen't appear a sign in the right corner of the monitor...I have windows Vista.What should I do?Should I reinstall the system?
Thank you for the answer in advanced...

You removed SCM from your system, install it again.

"Archive" and "View" buttons don't work after folio update

Hi all,
I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
This is very annoying as well as time expensive.
Tablet is Samsun Galaxy Tab SII with Android 3.2.
Any help is appreciated.

To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
The interface is so small that it's hardly possible to use it, but it works.

IMessage and Facetime account don't work anymore in my macbook (Yosemite)

Currently using Yosemite 10.10.3, I can use the iMessages account on different iphones and ipad I own, even a new one just configured.
On my Macbook (I think since Yosemite beta upgrade but not really sure) can't login the imessages account anymore ( I can use other accounts like Google, Bonjour, etc...). I was using imessages for a long time on the same Macbook with Maverick.
Now I get a login error: Can't access, verify network connection and retry, etc... but the network is ok and I'm using correct credentials, the same I use on apple store and apple web site.
On Facetime login I can't get any answer and keeps waiting for login (using the correct or even an incorrect password).
Any suggestion ?

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait for it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Volume and brightness buttons don't work anymore

Similar Messages

Maybe you are looking for