Volume control sound.

How to stop the Apple volume control making those annoying "Bep Bep" sound when you lower the volume?

Thanks Franz, I tried and found out the answer after I post the question.

Similar Messages

  • Sudden volume control/sound bug!

    I began experiencing this bug tonight and I'm not sure if it is a virus?
    I was watching a video on youtube and suddenly noticed that my volume was cutting in and out. After closing firefox, I could hear the volume popping in and out and noticed that the volume icon in the toolbar was going from medium to high and back. When I try to use the volume control slider, it goes from being whited out (can't move it) and back to normal, and when I try to use the volume keys, I get a circle and slash to show that I cannot manipulate the sound.
    I took screenshots of this in case I needed to show someone.
    It does this randomly. Sometimes it's normal, sometimes it's "stuck" and I can't get any sound, and then randomly it will pop in and out again and again. This has never happened before.
    I am using a 17" macbook pro (silver keys, not the newest one). The keys on the keyboard are not stuck, they function properly and like normal.
    I have tried:
    verify & repair permissions in disk utility
    run scripts
    run onyx and cocktail
    cleared all caches
    installed newest version of osx
    restarted and shut down countless times
    cleaned keyboard just in case
    If anyone has heard of this or has any suggestions PLEASE let me know. I baby this computer and I'm at my wits end!

    If and only If it's a Logic Board problem, the time between symptoms appearing to failure of hardware can vary.
    NOTE: I thought only this might be the problem because I've seen it happen a number of times, particularly in notebooks (because the hardware can become damaged more easily)
    I can provide no definite time-frame. but, I would suggest having the machine checked by an Apple service technician, or center; as always its better to be safe than sorry.
    Logic board (i.e motherboard) failures basically mean the core hardware dies, everything else, drives, RAM etc should remain unharmed. You may lose some core settings, date/time etc...
    Hope this is useful and good luck!
    Kind Regards,
    Peter.

  • [Solved] Can't Start Pulse Audio and No Sound/Volume Controls

    Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it.  I tried killing pulseaudio and restarting but I keep getting the same error:
    pulseaudio -k:
    E: [pulseaudio] main.c: Failed to kill daemon: No such process
    pulseaudio --start:
    E: [pulseaudio] main.c: Daemon startup failed.
    start-pulseaudio-x11:
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    This is the output of pulseaudio -v:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aac0"
    I: [pulseaudio] sink.c: device.string = "hdmi:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
    I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "1002"
    I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] source.c: device.product.id = "aac0"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
    I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
    I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
    I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "USB Audio"
    I: [pulseaudio] source.c: alsa.id = "USB Audio"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "2"
    I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
    I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
    I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] source.c: device.bus = "usb"
    I: [pulseaudio] source.c: device.vendor.id = "1415"
    I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
    I: [pulseaudio] source.c: device.product.id = "2000"
    I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
    I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
    I: [pulseaudio] source.c: device.string = "hw:2"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
    I: [pulseaudio] source.c: device.access_mode = "mmap"
    I: [pulseaudio] source.c: device.profile.name = "multichannel"
    I: [pulseaudio] source.c: device.profile.description = "Multichannel"
    I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
    I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
    I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 3 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
    I: [pulseaudio] client.c: Created 0 "Login Session c2"
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
    I: [pulseaudio] client.c: Freed 0 "Login Session c2"
    I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
    I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
    I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
    I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
    I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
    I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.
    When I start pavucontrol I get this:
    Can someone help me correct what the issue is, please let me know if you need more information.
    Thanks in advance.
    Last edited by Dobbie03 (2015-05-15 20:35:02)

    I tried "pulseaudio" in the terminal and get the following:
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.

  • My iphone 4S doesn't show the volume controls when playing videos and the speakers don't sound. But if I plug in the earphones then I can hear fine and the volume controls appear on screen. Please someone help.

    After a week or so of installing IOS 7 now I having this problem, the speakers don't work for videos, music or apps sounds, but they work fine for using the speaker phone. It's definitely some software issue as the volume control appears when i plug in the earphones, but disappears when unplugging them, same happens with the volume buttons on the side, they don't work when trying to use the speakers, but the work when using the earphones. Please help if you have a workaround for this. I don't want to carry my earphones all the time to listen to videos and music.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

    I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
    I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
    The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • No sound except Flash, volume control doesn't work for that.

    My sound seems to be cursed. Everything else works fine for me, but in the few years I've been using Arch I've been plagued by constant sound problems. Apparently something in a recent update broke my sound. I get no sound for anything but Flash, except Flash sound is SUPER LOUD, and doesn't adjust with the volume control. Everything else, there's just no sound. Not in VLC, Amarok, Battle for Wesnoth, or other various programs I tried. I tried VLC using the default sound output, the pulse output, and even the ALSA output just for the heck of it. No dice. I was reading in another similar topic that KDE might be the culprit, and indeed I'm using Pulse and KDE. My asound.conf is the default one that comes with the pulseaudio-alsa package. I've tried both gstreamer and xine as backends, they both have the same problem. In pavucontrol, it looks like sound is playing. If I play music or a test sound, the sound bar moves, but you still can't hear anything.
    Now here's where it gets weird. Selecting a device within Phonon is screwy. In the output section, the devices listed are as follows. All but the top one are grayed out.
    Internal Audio Digital Stereo (IEC958)
    Internal Audio Digital Stereo
    Dummy Output
    Internal Audio Analog Surround 4.1
    Internal Audio Analog Surround 4.0
    Now, in the audio capture section, the devices are different.
    Internal Audio Analog Stereo
    NVidia CK804 with ALC655 (NVidia CK804)
    NVidia CK804 with ALC655 (NVidia CK804 - MIC ADC)
    Pulse Audio
    In that list, pulse is greyed out. Are they supposed to be different like that?
    In any case... I'm at a bit of a loss. I just can't seem to keep the sound working on this thing. Any ideas?

    I think I encountered the sound problem too. I'm using a thinkpad T42, installed gnome, using ALSA. Normally I just enter runlevel 3 into the console, I have ALSA configed and the soundcard is well recognized. But when I play .mp3 using mpg123, everything goes fine but just no sound output (I setted up alsamixer previously, and had all necessary channels unmuted.). That goes several days. And one day, after setting up alsamixer, I also did a alsactl -f /var/lib/alsa/asound.status store, miracle the sound is there. But the day after, the sound disappeared again. Now I'm totally lost, leaving me thinking whether it's a Arch sound bug?
    By the way, my system is most updated and upgraded.
    Last edited by universalpoe (2011-01-12 01:57:42)

  • Satellite P10-804: Cannot alter the sound volume control

    The Sound Volume Control on the front of the unit has set itself to far in the whole and cannot be altered.
    Is this something I can fix ?

    I dont know if you can fix it.
    Do you have enough experience to disassemble the notebook?
    Do you have good experience in soldering?
    The volume controller is fixed on the motherboard its not easy to say what happens maybe there are some loose contacts
    I think its better to contact a notebook technician because he has more experience as a common notebook user like me and you!

  • Satellite A355-S6931 Low Sound - Volume Control wheel just spins

    I've checked and tried everything I can find or know how to do to get enough volume and nothing works.  Everything is set to 100 %.  I use headphones (same ones I used with my 5 yo Toshiba).  Why does that wheel just spin with no change in volume and no stopping point either way?  I have to suspend my Netflix service as I have about 2% sound.  Satellite A355-S6931 - 6 weeks old now.

    It might as well be broken as it affects absolutely NOTHING no matter how far or how long I turn it in either direction.
    I expect this computer to deliver an acceptable degree of sound.  I have some hearing loss and use headphones exclusively which have their own volume control.  My 6 year old Toshiba laptop would blast my eardrums out with volume if I wasn't careful to keep all controls from the max.  Granted, I paid more than double as much for the computer back then and got Win XP-Prof besides.  I wasn't looking for a "cheap" computer but expected comparable quality to my former Toshiba, in spite of being stuck with Vista.  I could do without MANY of the bells and whistles this thing has for some acceptable SOUND.  Seems like a basic provision. 
    Can I get the sound card replaced for something better?
    What about the adapters that sell for about $10 on eBay?
    BTW -- the Toshiba DVD Player won't work at all.  Using Window Media Player shows the DVD but the sound is totally inaudible.  I've had to suspend my Netflix service.

  • IPad2 No Sound  (7.0.4) even after Reset, YES I have tried using volume controls!, iPad2 No Sound  (7.0.4) even after Reset, YES I have tried using volume controls!

    I have an iPad2 that has recently been updated with 7.0.4. After turning off my iPad, I lost all audio from the iPad. Speakers work because when in Setting>Sounds> the ringer options work. YES, I have tried using the volume controls. But now the volume controls only control the ringer options.
    I have changed the option under settings for the lock out to mute and back to lock out.
    I have reset all setting
    I have turned off and on
    I have done are hard reset (holding the 2 buttons down).
    I have erased everything and started all over reset.
    I still have now sound from my iPad. Again the speakers work, when I go to sound under setting and play with the volume of the ringer it plays the sound.
    Why is my controls now only for a ringer after the UPDATE. Is my iPad2 a paper weight?

    Alright I have made some progress. I used compressed air and then rubbing alcohol to clean contacts. I first powered off the iPad2 and cleaned with air. Then I used the new toothbrush and rubbing alcohol to clean the contacts (really not sure how that works, but I will try anything at this point). Twice the ipad turned on when cleaning contacts.
    Outcome I now get sound from typing on the ipad like the typewriter sound. I did not have that before, but still no audio from apps or youtube, or anything else.

  • Headphone sound too loud - how to get very fine volume control in osx

    I could not use my headphones on my new MBP, because the sound was always too loud, even on the smallest setting. It appears that lots of other people have similar problems, so here is a way to fix this:
    To get very fine sound volume control I use soundflower fromhttp://code.google.com/p/soundflower/. You have to restart after installing it. Then go to preferences/sound/output and choose soundflower(2ch). Start soundflower from the applications folder, click on the flower symbol in the top pannel and soundflower(2ch) built in output. Then go to Audio setup and change the master for soundflower(2ch). This way you can get the global sound less loud or you can amplify it.
    Hope this helps a few people

    You saved my life (and my ears) ! Thank you marcel-sl for sharing this (;
    Prety cool software if you have an USB headset too loud. Now, I can use F11 and F12 (;

  • ITunes disables my Windows sounds and takes away the volume control

    I have searched and found no answer to this- others have posted this same question.
    I installed itunes and it removed my volume control from the task bar. It disabled my Windows sounds and took away the volume control from the System Tray next to clock. My media buttons no longer affect the volume either. I have to go into control panel to change my system volume.
    At first- it only happened when my daughter would plug in her iPod and use iTunes, and then after we'd reboot the computer, the volume control would come back and no longer be disabled. Each time she used iTunes, it would happen again. Then a computer restart would bring it back. Now all of a sudden, nothing brings it back. I have to go about 4-5 screens deep into Control Panel to adjust the volume there. This is ridiculous and an absolutely unacceptable side effect of iTunes.
    Does someone have an answer or do we need to delete iTunes and never again buy a crappy apple product?
    Message was edited by: sjs.chowchow

    Figured it out!
    Go to Control Panel -> Sound
    In the “Playback” tab, click on your Speakers to highlight it, then click Properties. In the “Advanced” tab, under “Exclusive Mode”, uncheck the box that says “Allow applications to take exclusive control of this device”. I restarted my computer after that, but I am not sure if you need to.
    Then you can go to your taskbar and right-click and choose “Properties”. In the “Notification Area” tab, under System icons, “Volume” is no longer grayed out and you can now check the box to make it show up down near your clock again.

  • Sound volume control unresponsive after waking from sleep

    Lately, a strange problem has developed on my MacBook 13-inch Aluminum (Late 2008), running Mac OS X 10.6.4:
    After waking the MacBook from sleep, the sound volume control keys on the keyboard does not affect the volume control of:
    * Neither the sound volume output by the built-in speakers,
    * nor the sound volume indicator/slider in the menubar,
    * nor the sound volume indicator/slider in the Sound preference pane in System Preferences,
    Only the sound volume slider/indicator in the Sound preference pane in System Preferences has an effect on the actual volume ouput by the built-in speakers.
    First I thought the problem was affected by disconnecting a set of analog headphones while the MacBook was sleeping -- it seemed that after sleep the volume control keys on the keyboard and menubar item still was set to affect the headphone port and not the built-in speakers.
    However, the problem just occured after sleeping without anything connected to the MacBook. The built-in speakers were muted, when the MacBook lid was closed, and the computer went to sleep - after waking from sleep the built-in speakers were unmuted - and control was only possible through System Preferences.
    Any ideas?

    Not sure if you stumbled on the other threads like this one:
    http://discussions.apple.com/thread.jspa?messageID=11801555&#11801555
    I've been having the same problem on my Mac Pro for a while, finally decided to see if there were some other people having the problem. I'll see if the others have a solution yet.
    One workaround I've been doing is to go to Preferences -> Sound and select a different output device. For me, I have to flick to Internal Speakers and then back to Line Out.
    Brett

  • Volume control exceeds 100%. Results in bad sound...

    Hey,
    since Gnome 3 my volume control has a little annoying bug.
    When I hit the Fn-Keys for volume or try to adjust volume with the panel icon
    the volume exceeds the actual limit which is shown in sound prefrences.
    This is really annoying and I'm actually afraid that it might ruin my speakers after
    a while because it happens to often out of a habit.
    There must be a simple way to set the limit in a config file!
    cheers

    https://bugzilla.gnome.org/show_bug.cgi?id=649411

  • I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. 
    There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Sound Blaster Zx SPDIF Volume control

    Hello, First post so please don't crucify me, but could somebody help me in understanding why I'm not able to adjust the volume when using SPDIF optical out to my Dennon amp on Zx?
    What I do not understand is that if I open the Windows 8.1 sound mixer I can adjust the volume for each application? Why not the mixed volume?
    Now, I guess the answer is that there is no 'final mix' stage after the sound is send to the sound card from windows and therefore SPDIF is limited when in 'pass thru' mode but really this is just semantics and a driver limitation.. would it be that hard for Creative (or MS) to design the driver or sound subsytem in such a way that the volume could be adjusted in windows rather than on my amp or per application? It seems fairly fundamental and renders my windows remote pretty useless.
    Have I misunderstood the situation or is there some other way I can get this to work?

    Ok I think this has to be a bug.. I am doing some more investigating and the behaviour of the volume control does not make sense. I have some screenshots below, its hard to explain but hopefully I can manage to do so!
    In the first scenario, changing the speaker volume up and down does NOT change the volume coming from the speakers, as you move the main Speaker volume slider the Application sliders move up and down but do not change.. example
    Vol at 50% from speakers..
    vol1.jpg
    Move main slider down, NO CHANGE, note that application slider is changing but still not changing output volume (even though changing application slider with mouse does work)
    vol2png.jpg
    Change volume of application and suddenly volume changes to louder
    vol3.jpg
    Again going back and turning main slider down doesnt change the volume...
    So you can get to a situation where the volume for the application says very low and its actually blaring out, then just clicking on the slider suddenly drops the volume.
    This has to be a bug? Does anyone else have the same behaviour as this?
    Attached Images
    vol1.jpg
    (9.4 KB, 2 views)

Maybe you are looking for

  • MRP Generated PR should not be converted into PO before release date.

    Gurus, In MRP generated PR system defines a release date for the PR(date by which the PR should get converted into PO).My requirement is system sholud not allow me to convert that PR into PO before that Release date. MRP generated PR are not subjecte

  • Applications quit unexpectedly immediatly

    About half of my applications are unexpectedly quitting immediatly after opening, such as safari, dashboard, dictionary, help, software update. As soon as I open the icon the programs try to launch and quit. Is there any program I can run to try and

  • How can I get the SD version of a movie through family sharing? It only allows for HD version downloads

    Family Sharing on. I got a movie on Blu Ray. Downloaded the digital copy. Stopped the download mid and deleted. Re-downloaded with the SD option...worked. Went to the other ipad. Went to get it from family sharing. HD only? no option to get it in SD

  • White borders around Firefox entry boxes

    Hi. I'm trying to fix / work around a quirky cosmetic bug that occurs in Firefox (OpenOffice, too) with Murrine SVN and, unfortunately, other GTK engines. There are white borders around entry boxes, that disappear if I mouse-over them, but reappear w

  • Wait Model

    Looking for good definitions and references for "Wait Model".(10g) Examples how it can be used for performance tuning. Thanks.