Volume low on your TV can't figure out why.. I FOUND THE ANSWER
Hello,
I figured I will share this information with everyone save you all the waste of time I went through .
So my sound is low on the TV but I am using my TV remote and the Fios remote and I can't raise the volume. But when I turn the TV off and on . I can see for a second the volume on low on the top right corner. I tried everything to raise the volume. So I called the hotline and Google this issue lots of dead ends.. I got an AWESOME person on the TV support for Verizon FIOS here is the fix
Go to your FIOS remote
Hit Menu
Hit Settings
Hit Audio
Then go to Volume Control make sure its says Variable not fixed ( fixed is if you want to make sure your kids can never blast Dora past a certain volume )
Then click ok go to the Set-top Box Volume
Then to raise the volume use the UP and DOWN keys near the OK key. That's right the vol + or - doesn't work yet.
I would do this raise it to the max then ok out till you are out of the menus.
Then try the volume on the remote the + / - will work.
They are usually intended for mobile devices like iPhones, iPad's (and Kindle's) ... you need the Apple iBook app to read them.
Google for Stanza or eReader and it should do what you want.
Similar Messages
-
[svn] 819: Can't figure out why this broke the build, but reverting it for further investigation
Revision: 819
Author: [email protected]
Date: 2008-03-14 13:51:51 -0700 (Fri, 14 Mar 2008)
Log Message:
Can't figure out why this broke the build, but reverting it for further investigation
Modified Paths:
flex/sdk/trunk/build.xmlRevision: 819
Author: [email protected]
Date: 2008-03-14 13:51:51 -0700 (Fri, 14 Mar 2008)
Log Message:
Can't figure out why this broke the build, but reverting it for further investigation
Modified Paths:
flex/sdk/trunk/build.xml -
almost tried everything....reinstalling ....32 bit 64 bit.. itunes. msconfig. antivirus disabling.... full antiviurs scan, installing on different computers.. using a different network....netshell command and what not.....dns flush....everything static dns...what and what not ....still problem is persisting ...can anyone help please....internet is working absolutely fine...checked everything else everything is good...but itunes cant even backup my device (((( feeling sorry for myself..
The first step should be to run your network connectivity tests.
iTunes help>>run diagnostics, just check network connectivity tests.
Paste the entire result into your next post. You can remove serial numbers. -
When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen
1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2 -
The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?
Click on the Layout button lower right and choose a Vertical lyout from the dropdown
-
I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?
ebony --
So, when you open your main Applications folder, there is no Office app there?
It's in your Users>Applications folder? -
I have a strange problem. When I put my iphone 4S into my pocket (pants or coat) and move it around, the phone makes a beep noise/tone. I can't figure out what is causing the noise. It doesn't sound like any of my regular applications. Maybe it is the lock noise but I can't tell for sure. More movement makes more beeps. Even walking with my phone in my pocket creates beeps. The IOS is 7.0.4 (11B554a). Anyone else have this crazy problem?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I tried to Skype someone but I can't see them but they can see me and I can't figure out why?
I tried to Skype somebody and they can see me but I can't see them and I can't figure out why?
I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.
-
I can't figure out why my reverb and echo things are greyed out
I can't figure out why my reverb and echo things are greyed out on the bottom right of my screen with the edit tab open for the track. I was going to put a screenshot in here but I couldn't figure it out. I one can understand what I mean. Thank you.
bennirubber wrote:
reverb and echo things are greyed out on the bottom right of my screen
http://www.bulletsandbones.com/GB/GBFAQ.html#effectsdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen) -
I rented a movie teh other night and started the download. It was taking a while so I went to bed. In the morning there was an error message and the movie did not download. I did nothing as I figured I would just try agian another day. A few days later I received my receipt by email. I had been charged even though I never got access to the movie. I tried to access the download again, but can not figure out gow to download the movie agian without being chraged. PLease help.
You could try the Store > Check For Available Downloads menu option. If that doesn't start it downloading then you will need to contact iTunes support (rentals are a one-time only download, so they will need to add it back into your queue).
Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film, click the arrow to the left of it and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page. -
Slow ripping speed - can't figure out why....
When ripping at aac 128 or 160, I only get speeds up to 5x or 7x (depending if it's the beginning of the CD or the end). I cannot figure out why this is:
--The drive is rated at 24x read speed
--This happens with every CD I try
--The setting for both IDE contollers are DMA
--The processor is Core Duo at 1.83. When ripping only 50 to 70 percent of the processor is used.
--7200 rpm hard drive
--1 gig ram
--error correction is not enabled
--no other programs are running
Another problem is that while ripping, the computer becomes extremely slow - I can't even type! When I press a key it takes half a second for that letter to show up!
I have had other computers with much slower specs that ripped CDs to iTunes much quicker. What can this be??
Someone please help me, I have been trying for a while to get to the bottom of this, and I think I may be losing my mind.....
Thank you....For updates from dell.com goto the link below and enter your service tag number (They provide links on how to find this) OR enter your model.
http://support.dell.com/support/downloads/index.aspx?c=us&l=en&s=gen -
Can't figure out why my navbar gets all pixelated online?
Hi Everyone,
I'm designing a floating site. My workflow is PS=====>Fireworks====>Dreamweaver. I made a navbar in FW with a transparent background and exported html to dreamweaver. I inserted the fireworks htm, put it online and it looks terrible. You can see it here:
http://www.njtraininggrounds.com/thirddaydesign.com/identity.html
Don't worry about the portfolio button, I know what's going on there. But I can't figure out why there is "stairstepping" on the logo and on all the navbar buttons. This is the first time I've ever created a floating site. I just put a jpeg for repeat using the dreamweaver css, and then inserted the rest in a table.
Could anyone give me an idea of what I'm doing wrong? Thanks so much.
WilThere's no problem with using PNG8, PNG24, or PNG32, other than the huge
weight of the latter two. But there's no need to go PNG here.
Personnaly I see only advantages in using PNG. The good thing about using PNG for graphics like this is that it does not tie you to a background with a certain color. like a GIF with a colored matte does. Should you wish to change your background color later you can keep on using your menu buttons. There is no need to prepare new graphics for the menu just because you change a background color or image.
As for the "huge" weight of the PNG file, I'd say that depends on your definition of "huge"
If you compare the filesizes of a simple graphic like that, I see no big improvement by using GIF.
see screenshot: -
Can't figure out why my zoom into stills shakes
I have been using keyframes to create zooms and pans over pics, but every once in a while one of the pics shakes while it's moving. I can't figure out why this happens- any ideas? THANKS
What you might be experiencing is a scaling issue: you're not really zooming into a picture but actually scaling it. Keep in mind DV is a 4:3 ratio. And your photos probably aren't. Scaling an image is shifting the pixels in an image and so if you're making the picture grow or shrink, you're shifting those pixels and that's could be what you are seeing. What size are your pictures? Are they huge, like twice the size of your standard 720 x 480 DV?
If your photo images are extremely large (like 2838 x 2205, 300 dpi) you might try opening them up in a program like Photoshop and making a smaller version. You can force the results to be 4:3 by using the Crop tool. Be sure to adjust the Crop settings to something like 1440 px x 960 px , 72 dpi (double 720 x 480 so you can still scale) and then Crop the photo. Keep in mind, you might lose some of the photo because it isn't 4:3, so use Crop judiciously. Save the resulting image as something else and try using it instead of the original. Be sure to _render the results in the Timeline_ even though Final Cut may refer to it as a real-time effect.
Also you should only have four total keyframes: a keyframe for the starting Scale size and a keyframe for the starting Center position. Then you should have a keyframe for the ending point for both Scale and Center where the image in Final Cut's Canvas window is either larger or smaller. That's it. If you have any other keyframes in-between these four, you can have problems-- which show up as the image moving around, hesitation, or some other unwanted movements.
Good luck! -
Can't figure out why it's throwing this exception
Can anyone see a problem with this method? I have checked over everything and can't figure out why it's giving me an exception. All of the get methods are retrieving data and the db table and all the fields are correct.
// add a Reservation to the database
public static void addReservation(Reservation aReservation)throws Exception
try
String query = "INSERT INTO Reservations (Number, ContactAlias, SPOC, SRNumber, StartDate, EndDate) " +
"VALUES ('" + aReservation.getNumber() + "', " +
"'" + aReservation.getContact() + "', " +
"'" + aReservation.getSPOC() + "', " +
"'" + aReservation.getSRNumber() + "', " +
"'" + aReservation.getStartDate() + "', " +
"'" + aReservation.getEndDate() + "')";
reservationList.removeAll();
reservationUIList.removeAll();
Statement statement = connection.createStatement();
statement.executeUpdate(query);
open();
if( reservationRS !=null)
while( reservationRS.next() )
aNumber = reservationRS.getString(1);
reservationList.add(aNumber);
reservationUIList.add(aNumber);
statement.close();
close();
catch (Exception e)
System.out.println("Caught exception in addReservation of DM.");
throw e;
}And the exception:java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
at ReservationDM.addReservation(ReservationDM.java:149)
at Reservation.addReservation(Reservation.java:268)
at ReservationUI.invokeAdd(ReservationUI.java:552)
at ReservationUI.actionPerformed(ReservationUI.java:285)
at java.awt.Button.processActionEvent(Button.java:324)
at java.awt.Button.processEvent(Button.java:297)
at java.awt.Component.dispatchEventImpl(Component.java:2588)
at java.awt.Component.dispatchEvent(Component.java:2492)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:334)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:126)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:88)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:80)Thanks,
ShawnWell, one extreme that I eventually had to go to was inserting a new row with only the primary keys, which were numerical columns, while just setting the strings to empty values.
INSERT INTO Courses VALUES(?,?,?,1,0,?,'','','','','','','','','')
Access finally seemed to handle this without barfing.
Then, I updated each string column ...if you can believe it ...one at a time in a for loop from a custom 'RowUpdateSet' object. This actually worked well because eventually I also used it to update the row when necessary, and to only update columns whose values had changed. One teeny weeny snippet from a great deal of code looked like this...
for ( int i=1; i<length; i++ ) {
if ( updateSet.getUpdateColumn( i ) ) {
synchronized ( updateSet ) {
scrollResults.updateObject(i,(String)updateSet.getUpdateValue(i));
scrollResults.updateRow();
}I guess I will likely get flamed for participating in this whole discussion, because it all does become quite irrational. I can see why peoples initial response is likely ..."what, couldn't you even debug your own sql string bozo?" All I know is, there seems to be insert statements that Access just mysteriously refuses to perform ...and it has nothing to do with terminated strings or syntax errors. How you choose to perservere and 'get the job done' is probably as unique to each individual as is the whole mysterious error in the first place. I just got tired of staring at what appeared to be a totally disfunctional environment and decided to go around the problem and get done with the project ...which eventually worked like a charm.
This is exactly what I meant when I said don't look too closely or you might wind up distrusting this technology you are working with on a day to day basis. Frankly, the more I work with technology the more I realize that I, for example, will never use my credit card over the web (particularly with .NET in the picture). I am sure you can find another way to get to the results you want if you think about it creatively. I got my project done. I just didn't get there in the way I had expected I would. Maybe that's not even a bad thing, even though it can be extremely frustrating at times. When we look at all the disclaimers that come with software these days, or look at faster and faster computers that just run slower and slower, maybe we shouldn't expect so much from technology. At least Java allows you to write your own logic and often work around these impediments ...which is still alot better than being stuck with .COM libraries that force you to abandon a project half way through when you find out the library fails to live up to its claims in the reference manual.
Sorry your project is on hold at the moment. If no one else answers, start a new thread that asks your question again, and I will butt out. Maybe there is someone who has found out what causes this issue. After all, I can only speak from my own experiences ...and I am far from being an authority on any issue surrounding technology. Good luck, and don't give up. I am sure there is a way to get where you want to go.
After saying all that, I realize kev wrote a response while I was composing this one. As he implores, yes ...do be certain you have eliminated all the obvious possibilities before you adventure into any painfull work-arounds. Really, I wish you all the best of luck. -
Almost every time my daughter FaceTimes me, another person answers and he is getting very annoyed. I have checked my settings and can't figure out why this is happening.
Is she facetiming your phone number or email address, b/c email address should not do that.. Was there an old iPhone associated with your number or email? I've seen texts show up on long "deactivated" devices..
Maybe you are looking for
-
TV@nywhere master. video problem
hi. i got the tv@nywhere card for my wife for xmas & it was working fine until recently when all of a sudden when recording a clip from the dvd/vcr & she goes to add it to the project she's working on it opens only as a mpeg sound clip??? all was fin
-
Using flex 2.0 charting components with flex 3
I purchased and installed a flex 2 charting components library so i could use it in my AIR application development. It installed alongside the 3.0 beta visualization components so that I now have two copies of each component in my charts folder. I ca
-
Database Connector Error: "Function_NOT_Supported"
In SAP Best Practice Purchasing module Inventory Dashboard, Turnover Report am updating my data source location to ERP server . Its data source is Function module ZINVENTORY_GETFIVETURNOVER when i update this function module it pops me error D
-
UIDefaults key for cell in JTable
Dear friends, My table is almost done, but when the user selects a cell, the oter cells of the selected line becomes with a white foreground... what is the KEY into te UIDefaults for the cells foreground ? beter asking: what is the colors entries for
-
I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"