Von PSE 4.0 nach PSE 5.0: Probleme mit Katalogen

Hallo zusammen,
bislang habe ich Adobe Photoshop Elements 4.0 benutzt und damit ca. 10.000 Bilder verwaltet und beschriftet.
Nun habe ich Elements 5.0 (Vers. 5.0.2) installiert. Nach dem Aufruf von PSE 5.0 wollte das Programm den Katalog konvertieren, was etwa 1 Minute dauern sollte. Zuvor wurde mir mitgeteilt, dass der alte Katalog unter einem anderen Namen abgelegt (als Sicherung) wird.
Als nach 10 Minuten der Kovertierungsbalken immer noch an der gleichen Stelle stand, habe ich über den Task-Master festgestellt, dass PSE 5.0 seine Arbeit mit "keine Rückmeldung" eingestellt hatte. Ich beendete daraufhin das Programm über den Task-Master.
Nun wollte ich mit PSE 4.0 zum einen den den gesicherten Katalog öffnen, erhielt aber die Fehlermitteilung "Der Katalog wurde mit einer neueren Version erstellt und kann nicht gelesen werden". Mit Öfnne des umgestzten Katelogs erhielt ich die gleiche Fehlermeldung. (Die Kataloge liegen übrigens unter der Directory 'all users' und ich bin als Administrator eingeloggt.
Das Programm läuft unter Windows XP (mat aktuellsten Updates) und einem noch freien Speicherplatz von 200 GB.
Meine Frage: wie kann ich die Kataloge unter PSE 5.0 (oder auch PSE 4.0) wieder lesen und den Bildern zuordnen? (Mein Hauptproblem ist die Zuordnung der Tags)
Vielen Dank im voraus für eine (hoffentlich) hilfreiche Antwort auf mein Problem.
MfG
Mike

Hallo Matthias,
vielen Dank für Deine schnelle Antwort.
Leider kam ich an keinen Katelog mehr heran.
Weder mit PSE 4.0 ("Katalog wurde schon von neuerem Programm umgesetzt") noch mit PSE 5.0 ("Keine Zugriffsrechte"). Letzteres habe ich überhaupt nicht verstanden, da ich als Admin alle Rechte habe und hatte. Dies wurde auch unter "Sicherheit" bei der Datei angezeigt.
Ich habe jetzt einfach folgendes getan:
- Das letzte Image vor einem Monat als Laufwerk angehängt.
- Über das Programm taskmgr den Prozess "Photoshop etc." gestoppt.
- Unter "All user" das Verzeichnis "Adobe" umbenannt in "Adobe_Sik"
- Vom Image das Verzeichnis "Adobe" unter "All user" kopiert.
- Rechner neu gestartet und nun funkioneirte der Katalog unter PSE 4.0 wieder.
- Noch einige neuere Bildverzeichnisse über den Organizer aufgenommen
- Backup unter PSE 4.0 erstellt.
So und jetzt versuche ich nochmals PSE 5.0 zu installieren und werde entsprechend Deiner Hilfe einfach den Rechner laufen lassen.
Ich hoffe es klappt.
Wenn nicht, bin ich wieder hier.
Danke und Gruss
Mike

Similar Messages

  • PSE 5: Neuinstallation nach Ablauf Demo

    Hallo PSE-Spezialisten,
    vor wenigen Tagen war meine PSE-Demo abgelaufen. Da mein PC recht langsam war (Festplatte ist gerade recht voll ...), habe ich es kurzerhand deinstalliert.
    Obwohl mir nicht alles gefallen hat, habe ich jetzt das Programm gekauft, um für die zukünftig öfter anfallenden RAW-Bilder meiner Nikon D 80 endlich ein brauchbares Werkzeug zu haben.
    Nach Aufräumen meiner Festplatte will ich PSE 5 wieder installieren.
    Nun meine Frage: Kann es Probleme mit den Resten der alten Installation geben? Was sollte ich beachten?
    Vielen Dank für jeden Hinweis
    Bernhard
    (WinXP home, SP2)

    Hallo Bernhard,
    wegen der Testversion gibt es keine Probleme. Einfach installieren und gut. man kann sogar die eventuell vorhandenen Kataloge weiterverwenden.
    Bei manchen CD-Serien gab es eigenartige Probleme während der Installation. Sollte also so etwas auftreten, hilft es, den CD-Inhalt auf die Festplatte zu kopieren und dann das Setup von dort zu starten.
    Übrigens kann PSE 5 jetzt sogar das Camera RAW Plugin 4.1 verwenden. Dort sind verschiedene Einstellmöglichkeiten dazu gekommen. Der
    Download lohnt !
    Grüße
    Matthias
    Tipps und Tricks zu Photoshop Elements hier -->
    www.wertvolleswissen.de

  • Probleme mit Offnine-Dateien bei PSE 4

    Hallo Community,
    ich bin neu hier und habe folgendes Problem mit Photoshop Elements 4:
    Um Speicherplatz freizugeben, habe ich mich entschlossen einen Teil meiner Fotosammlung auf eine DVD zu speichern. Dazu habe ich die Funktion brennen / backup benutzt, mit der Option Dateien verschieben. Im dritten Schritt habe ich als Ziellaufwerk mein DVD-Laufwerk ausgewählt und mit OK das Fortfahren bestätigt. Der Speichervorgang wurde mit Erfolg ausgeführt und die Prüfung des Datenträgers war OK. Im Organizer ist das Symbol für Offline-Dateien in den betroffenen Bildern zu sehen. Interessant wurde es anschließend, als ich eine Offline-Datei mittels der F11-Taste im Vollbildmodus anzeigen wollte. Nach dem Druck auf die F11-Taste wurde ich aufgefordert die entsprechende (richtige, beschriftete) CD/DVD einzulegen. Das habe ich gemacht, bin dann aber erneut aufgefordert worden: Legen Sie einen Datenträger ein (mit der entsprechenden Datenträgerbezeichnung). Das ganze ging immer so weiter, immer im Looping.
    Ich habe mich mehrfach überzeugt. Es ist der richtige (beschriftete) Datenträger, auf dem auch im Explorer die einzelnen Dateien aufgeführt sind, die PSE auf dem Datenträger scheinbar nicht findet.
    Nach mehreren Versuchen kam ich durch das Rattern und das Leuchten der LED am Diskettenlaufwerk schließlich darauf, dass PSE beim Einleseversuch nicht auf das CD/DVD-Laufwerk (es ist nur ein CD/DVD-Brenner eingebaut) zugegreift, sondern wohl auf das Diskettenlaufwerk. Das ist wohl ein Bug, oder? Ist das ein bekannter Fehler oder handelt sich es bei mir um einen Einzelfall? Eine Deinstallation mit anschließender Neuinstallation brachte diesbezüglich keine Besserung.
    Jetzt machte ich mit einer kleinen (wegen dem begrenzten Speicherplatz auf der Diskette) Datei den Versuch, die zuvor auf DVD gebrannte Offline-Datei auf eine Diskette zu kopieren, die Datenträgerbezeichnung der Diskette anzupassen und diese bei der Aufforderung die CD/DVD einzulegen ins Diskettenlaufwerk (A:) zu schieben. Und siehe da: es hat die Datei geladen und im Vollbildmodus dargestellt.
    Nachdem ich das nicht glauben konnte, habe ich zu Testzwecken eine Installation auf meinem Laptop gemacht. Auch hier das gleiche Ergebnis. Ein Variieren mit verschiedenen Datenträger CD-R, DVD-RW, CD-RW (von verschiedenen Herstellern) macht keinen Unterschied.
    Da diese Offline-Datei-Funktion auch ein wesentliches Anschaffungskriterium für Photoshop Elements war, bin ich jetzt etwas ratlos. Gibt es eine Version von Photoshop Elements 4, die diese Funktion des Offline-Dateneinlesens beherrscht? Ich denke doch. Ich bin mit den restlichen Funktionen von PSE sehr zufrieden, nachdem ich im Vorfeld auch schon mit ACDSee experimentiert habe. Ich weiß, dass zwischenzeitlich ein Update auf Version 5 erhältlich ist, sehe dafür aber aus Kostengründen momentan keinen Anlass, zumal mir die in Version 4 vorhandenen Funktionen eigentlich reichen.
    Kann mir jemand helfen?
    Danke im Voraus!
    Walter

    Hallo,
    es geht um das Kopieren einer Fläche in einem Foto in eine andere Fläche des gleichen Fotos.
    Bei Photoshop Elements 5.0 geht das mit dem "Stempel-Icon". Ich hatte aber eine frühere Version von Photoshop, mit der das viel komfortabler funktionierte: Diese Version möchte ich kaufen, kenne aber nicht die genaue Bezeichnung.
    Das Kopieren ging bei dieser früheren Version so: Auf die zu kopierende Fläche wurde ein Kreis gelegt. Dort, wo hin kopiert werden sollte, ein anderer. Per Mausklick konnte man dann kopieren. Abstand der Kreise voneinander, ihr Winkel und ihre Größe - alles konnte ganz flott per Mausklick variiert werden.
    Kennt jemand diese Version und wie heißt sie?
    Noch ein Tipp. Dort waren vier Tutorien drin, mit denen man richtig arbeiten konnte (also nicht nur Vorführungen, wie jetzt in Photoshop Elements 5.0). Eines davon war ein Stonehenge-Motiv, wo man einen anderen Himmel hineinkopieren konnte.
    Vielen Dank im Voraus!

  • Problem converting pse 6 catalog to pse 7

    I am a longtime pse user, I started with Album.  I have photos from a trip that I had in pse 6 on my laptop that I want to get into pse 7 on my desktop.  I have not found a lossless way to merge catalogs in pse so I have three catalogs.  I successfully converted my desktop catalog from pse 5 to pse 7 with no problems.  I backed up two catalogs under pse 6 on my laptop and restored them to my desktop system. I tried to covert each one but the conversion failed.  I found that I had two eSATA drives with the same volume ID so I backed up my desktop catalog (the photos resided on one of the drives) and reformatted one drive.  Pse was still confused so I reformatted the other drive as well.  Pse 7 now runs fine for my former pse 5 desktop catalog which I’ll call catalog A.  I restored the first of my pse laptop catalogs, I’ll call it catalog B, and after multiple attempts got it to convert by restoring it with pse 7, the automatic conversion after the restore was successful.  I did the same with the remaining pse 6 backup file, call it catalog C, restoring it with pse 7 but the conversion failed. I did catalog repair but it found no errors, did ‘repair anyway’.  Convert failed again.  I optimized it, convert failed again.  I checked the convert log and it says the catalog copy failed.  The log showed that pse tried to copy the catalog to the location of my photos for catalog A to a file named the same as my catalog C name.  The last line in the log is - caught exception "catalog copy failed".  This implies to me that it never got far enough to encounter a ‘poison file’.
    I have run out of ideas and any help would be appreciated.  My last choice option is to use ‘get photos’ to get the catalog C photos into catalog B to get everything running under pse 7 rather than under multiple products.
    I am going to make another forum entry but it may matter here that the catalogs of catalog B and C are in the same directories that I restored their photos to and are only found when I ask to find ‘custom location’ directories.  The psedbtool program never sees them.

    I created a new folder ‘Black Sea and Spitsbergen CATALOG’ and moved the catalog and thumbnail files to it.  Pse 6 opened it and displayed the thumbnails faster than usual.  When I do the catalog option Black Sea and Spitsbergen CATALOG shows as the current catalog.  I did the reconnect all missing files and got the no missing files message.  Did the repair catalog and got the no errors message did repair anyway.  No errors found, I did the reconnect again, no missing files.  I closed pse 6.  Opened pse 7 file>catalog>convert>find more catalogs and pointed to the folder ‘Black Sea and Spitsbergen CATALOG’.
    Pse found the catalog, I highlighted it and clicked on convert.  I got the conversion completed successfully message! Clicked OK>done>open and the converted catalog opens.  Catalog manager now shows both catalogs under the Custom Location radio button, fantastic!  I did a reconnect and got the no missing files message.
    Ok; so I think I learned the following:
    1)      The current catalog name is determined by the name of the folder it resides in.
    2)      The catalog and thumbnail files need to be in the same folder.
    3)      It works better if the catalog and thumbnail files are in a separate folder from the pictures.  I suspect performance is improved because it finds the thumbnail file faster; I have 21,000 photos in the catalog.
    I suspect this could also solve my catalog move problem because pse may be moving the contents of the folder where the catalog resides.  I am going to try it, will post the result under that discussion.
    If you would be kind enough to confirm the above three points I would appreciate it.  I will keep this open for your reply.
    Thank you again, it seems simple now that I understand a bit more, thanks for your time and for sharing your knowledge.

  • Can I remove PSE 7 after installing PSE 10?

    Will removing a previous version of PSE (version 7) cause any problems with my recent installation of PSE 10?

    If you have bought the full version of PSE 10 then there is no need to keep PSE 7 on your computer. If you have bought an upgrade to PSE 10 from PSE 7 then you will not need PSE 7 on your computer but from an installation perspective you will need the SN for PSE 7(and if PSE 7 is an upgrade then the previous qualifying version SN's also).
    Remember to take a backup of your catalogs and de activate the software before unistalling PSE 7(if you do decide to unistall it).

  • Problems trying to restore catalog from PSE 7 windows to PSE 12 MAC, what to do? NO PC with windows available any longer

    I have recently changed my damaged PC windows to a MAC. Adobe kindly changed my PSE platform, it means PSE 12 is installed in my MAC but when I tried to restore my last catalog which was made with PSE 7 in windows I receive a message saying there is not valid file in my external hard disk (my backup). I've reviewed the available technical support and know that recommendation is to first update the catalog in windows using PSE 12, nevertheless I have not any longer a PC and even if I could use one, I have not anymore PSE 12 for windows platform. Could somebody please help me to solve this issue.
    Thanks

    A number of people have reported this error message and have had trouble troubleshooting.  (PSE is notorious for uninformative error messages.)  A couple of things to check:
    - Make sure the file permissions on the external drive are set properly.  In Windows Explorer, try creating a couple of test folders, and then use another program like Notepad to try creating some test files in those folders.
    - What the external drive originally connected to an XP system and now connected to a Vista or Windows 7 system?  That can create obscure permissions problems.
    - Is the external drive formatted as as FAT32 or NTFS?  In Windows Explorer, navigate to Computer, right-click the external drive, and select Properties.
    Note that you can do a backup using a third-party utility or by copying all your picture folders with Windows Explorer.  Make sure to also copy the catalog folder (do Help > System Info to find its location).  Doing a restore from such a backup is quite feasible, though it may take a little extra time.

  • I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

    I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

    Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial  for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.

  • I just installed PSE 13. I also have PSE 10 with all my Albums Organized. How do I transfer my PSE 10 Albums to PSE 13?

    I just installed PSE 13. I also have PSE 10 with all my Albums Organized. How do I transfer my PSE 10 Albums to PSE 13?

    thinkfox a écrit:
    I just installed PSE 13. I also have PSE 10 with all my Albums Organized. How do I transfer my PSE 10 Albums to PSE 13?
    I take it that you have installed PSE13 on the same computer. Did you notice the dialog prompting you to 'convert' the previous catalog? If you have agreed, the old catalog (containing the albums definitions) has been converted to the PSE13 format, and you get your old albums from that catalog. If you have not agreed, it's still time to do so. Open the catalog manager in PSE13; then click on the 'convert' button. Select the old catalog from the list and convert.

  • New PSE 11 and Old PSE 7

    I want to replace my PC version of PSE 7 by my new PSE 11 for Windows 7. Should I uninstall PSE 7 or does PSE 11 do the uninstall as part of the installation process?

    Hi,
    When you start PSE 11 Installation it will not ask you to uninstall any previous version as they may co-exist on the Machine. If you dont want PSE 7 then uninstall it first and then install PSE 11.
    regards,
    Abhijit

  • Probleme mit Mail Client in PSE 9

    Hallo Zusammen,
    ich habe ein Problem mit dem Auswählen des Mail Client's  in PSE 9. Wenn ich unter "Weitergeben/E-Mail-Client" den Auswahlbutton öffne, dann erscheint bei mir nur der Adobe-E-Mail-Service. Normalerweise müsste auch Thunderbird erscheinen der bei mir als Standart-Client installiert ist. Als ich versuchte Bilder über die "Weitergabe" per E-Mail zu verschicken, bekam ich eine Fehlermeldung das ein Problem mit der Firewall vorliegen könnte oder die Verbindung zum Internet unterbrochen ist. Beides war nicht der Fall. Wenn ich versuche Bilder über den Kodak Printservice zu senden kommt die selbe Meldung.
    Mein Betriebssystem ist Windows 7 Home Premium 64 Bit.
    Wenn ich die Systemabfrage mit PSE im Hilfe Menü mache bekomme ich diese Meldung:
    Betriebssystem: 2000
    Betriebssystem-Version: 6.1
    Systemarchitektur: Intel Prozessor Familie:6 Modell:7 Stepping:10 mit MMX, SSE Integer, SSE FP
    Ich hoffe es hat jemand eine Lösung
    LG
    Michel

    Hallo Michael,
    auch bei mir funktioniert es nicht mit Thunderbird. Ich habe allerdings auch noch PSE 6.
    Ich finde das auch nicht so toll. Besser gesagt, es k.... mich an.
    Wollte eben mal sehen, ob es dafür eine Lösung gibt. So bin ich auf Deinen Beitrag gestoßen.
    Es hat auch nicht mit dem Adobe-Dienst geklappt bei ausgeschalteter Firewall?
    Wenn das Problem überhaupt für Dich noch relevant ist, würde ich Dir gerne helfen.
    LG Thomas

  • Do I need to remove PSE 6 to install PSE 12?

    Am I supposed to remove PSE 6 before installing PSE 12?

    Thanks for the quick reply. I'm anxious to get it installed.
    As to the insanity--When you get older you get to redeposit that insanity back on the kids! Trust me, it can be fun!
    Hope your day is good. Happy Sunday tomorrow!

  • Questions that pertain ONLY to PSE 9 and/or PSE 9 Organize?

    Is there a way to populate questions in this forum that pertain ONLY to PSE 9 and/or PSE 9 Organize?

    Barbara and Ken, thanks much for the update and the suggestions. I get the gist of the situation and will proceed with that in mind. I'll be back if/when I have specific questions. I'm about 8,000 images into organizing about 20,000 currently and am still in the learning stage. I'm about to try Adobe's synchronization offer (I have a main, an office, and laptop computer) and I'm very anxious about just jumping into the unknown - meaning I've never done this before. Just trying to get a feel for what others might have done wrong previously. Thanks to both of you. jannterr.

  • Wie kann ich von Acobat 9 pro nach 11 pro upgraden ?

    Sehr geehrte Damen und Herrren 
    ich habe mir ein neues Laptop mit win 8.1 gekauft und möchte von Acrobat 9 pro nach 11 pro upgraden.
    Ich habe deshalb einige Fragen 9 pro läuft unter win 8.1 nicht ,wie bekomme ich dann das Upgrade
    auf meinen Laptop?
    Bitte erklären sei mir wie ich vorgehen müsste. Bekomme ich eine Version als DVD oder eine
    Download- Version die ich mit dem alten Key
    aktivieren kann oder wie soll diese Sache funktionieren?
    Ich nutze meinen Laptop nur als user, ich kann bestenfalls eine DVD einlegen oder einen download
    starten.
    Bitte erklären Sie mir wie so ein Upgrade abläuft.
    Zu guter Letzt was kostet ein upgrade ?
    Ich bin auf den Adobe Seiten immer im Kreis gelaufen, habe aber wirklich keine vernüftigen Infos gefunden.
    MfG
    Rainer Spahn

    I am not sure the upgrade to XI is available after the release of DC, and 9 does not qualify for an upgrade to DC. You can check Adobe.com to see if the upgrade to XI is still available, but I doubt it. You might still be able to get it from a certified reseller. Good luck.
    I think I have heard of some folks successful with Win8.1 and AA9, but the only way to be sure is to try it. You can be sure that a update will be a must if you succeed with the installation.

  • Nach dem update acrobat 6.0 professionell auf letzten Stand Probleme mit Anzeige von Grafikdateien

    Hallo deutsche Community - bisher gab es auch auf WIN 7 mit Acrobat 6.0 Professionell keine Probleme - nach allen verfügbaren updates erkennt das Programm in einer PDF nicht mehr Grafikdateien z.B. *.jpg oder druckt eine erkannte Datei nicht aus. Es kommt neuerdings der Hinweis auf Picture Task und die Aufforderung auf weitere Einstellungen. Ich kkomme damit nicht klar - wer kann helfen

    Пишите по русски
    Wed, 24 Oct 2012 12:24:19 -0600 от Klostein2 <[email protected]>:
    >
    >
    >
    >Acrobat 8 Probleme mit Java-Skript (zoomType) created by Klostein2 in Deutsche Foren - View the full discussion

  • Fehlerhaftes Creative Cloud Abonnement und Probleme mit dem Support von Adobe

    Liebe Adobe Gemeinschaft.
    Vor ca. einem Jahr bin ich in die Adobe Creative Cloud eingestiegen obschon ich etwas dagegen war. Meine Kreditkarten Informationen einfach so bekannt zu geben.
    Alles lief ohne Probleme ein halbes Jahr lang bis wir die Kreditkarteninformationen wechseln mussten.
    Es gab bereits Probleme mit der Mehrwertsteuer aber wir dann in eine Team Cloud wechseln wollten wurden uns ein zu hoher Betrag abgerechnet. Wir beanstandeten diesen zu hohen Betrag aber nicht einmal Adobe Support war
    im Stande dies zu ändern und bat uns abzuwarten da Sie intern dies klähren wollten. Ein paar Tage später hatten wir plötzlich anstelle eines tieferen Betrages ein "Neues" Abonnement auf der Kreditkarte belastet. Eine erneute Beanstandung
    mit dem Support ergab weiterhin Probleme mit interner Software seitens Abobe und man könne momentan nichts tun. Wir wissen vom Vorfall dass Adobe vor Jahren mehrerer Millionen Kreditkartendaten gestohlen wurde, so sorgfälltig
    geht Adobe mit externen Daten um. Schade um diesen Giganten der nicht einmal sowas auf die reihe kriegt.
    Nun gelang es mir vergangenen Sonntag mein Abonnemt in meiner Cloud einstellung zu stornieren aber siehe da zwei Tage später bedankt sich Adobe bei meiner "neuen" Bestellung. Nun werden mir Monatlich vier Einzelplatz Lizenzen
    a 88.95 (384.25) Franken abgebucht und mir sind die Hände gebunden. Adobe schafft es nicht meine Abos weder zu verwalten noch zu korrigieren. Der Support selber versteht nicht einmal richtig Deutsch. Schade solche Mitarbeiter zu beschäftigen!
    Der Support ist kaum erreichbar, nur Telefonisch und sonst kommt man zu einem chat, hat jemand für mich eine E-mail Adresse? Ich finde diese Art und Weise wie mit Kunden umgegangen wird einfach schade. Keine Hilfe mehr bzw. geschultes Personal welches
    im Stande ist einem zu helfen bzw. Probleme zu lösen.
    Ich werde versuchen in Zukunft bei Avid oder Final cut mein Glück zu finden, dieser Adobe Software Konzern ist einfach nicht in der Lage eine saubere faire korrekte und freundliche Dienstleistung anzubieten.
    Henry Maurer
    Switzerland

    Hallo Mylenium
    Vielen Dank! Genau das habe ich nun alles in die Wege geleitet, aber ich renn jetzt meinem Geld etwas hinterher. Warum schafft es ein solcher Konzern nicht sowas in den Griff zu bekommen? Da storniert man seine Mitgliedschaft und schwubs
    hat man ein neues Abonnement welches auch noch mehr kostet! Sind DIE doff?
    Ich war noch nie ein Cloud Fan aber jder denkt Heutzutage das ist doch eine coole Sache weil Apple damit angefangen hat oder was? Hauptsache man kann sich Cloud nennen. Wahnsinn wie Kreative!
    Andere Möglichkeiten gibt es ja nicht! Schade drum. Ich sehne mich nach einer Installationsdatei via CD oder DVD ohne dass Dir einer täglich vorschreibt was Du zu tun und lassen hast und Dich monatlich daran erinnert für etwas zu bezahlen
    welches nicht einmal wirklich toll funktioniert. Oder funktioniert Dein "Untertitler" bei Premiere? Haha nicht einmal der Support von Adobe wusste wie er geht und verwies mich auf Adobe TV!
    Henry

Maybe you are looking for