VPN not working after Update from SLS to MLS
Hi folks,
last weekend I updated my Snow Leopard Server following the suggested procedure, installed first Mountain Lion and then OS X Server. Now I have a problem.
Setup:
- Macmini Server located in my private LAN, running SLS as a virtual machine (VMware)
- connected to the Internet via an AVM FritzBox 7270
For HTTP (80) and VPN (500, 1701 and 4500) the ports are forwarded to the virtual machine - everything was working well before the update (access to Website & VPN from both internal and external). The VPN connection is used either with an iPhoen or with my Macbook pro.
The website is still working like expected. VPN service is not working properly anymore. I can access it from internal, but not from external.
So, to make it clear, nothing but the server OS changed in the setup.
Any ideas? Changed ports from 10.6 to 10.8?
Thanks in advance,
Andre
(err, and YES, I have a snapshot of 10.6. - if I revert it's working again, but this can't be the solution)
Hi all,
to point out the difference, this is what the logs say....
Connecting from internal, VPN success:
21.06.13 18:12:13,880
racoon[226]
IPSec Phase1 started (Initiated by peer).
21.06.13 18:12:13,882
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 1).
21.06.13 18:12:13,883
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 2).
21.06.13 18:12:13,921
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 3).
21.06.13 18:12:13,942
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 4).
21.06.13 18:12:13,969
racoon[226]
IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
21.06.13 18:12:13,969
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 5).
21.06.13 18:12:13,970
racoon[226]
IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
21.06.13 18:12:13,970
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 6).
21.06.13 18:12:13,970
racoon[226]
IPSec Phase1 established (Initiated by peer).
21.06.13 18:12:14,881
racoon[226]
IPSec Phase2 started (Initiated by peer).
21.06.13 18:12:14,881
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 1).
21.06.13 18:12:14,881
racoon[226]
IKE Packet: transmit success. (Responder, Quick-Mode message 2).
21.06.13 18:12:14,885
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 3).
21.06.13 18:12:14,886
racoon[226]
IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
21.06.13 18:12:14,886
racoon[226]
IPSec Phase2 established (Initiated by peer).
21.06.13 18:12:14,890
vpnd[1210]
Incoming call... Address given to client = 192.168.0.203
21.06.13 18:12:14,918
pppd[1371]
pppd 2.4.2 (Apple version 596.13) started by root, uid 0
21.06.13 18:12:14,923
pppd[1371]
L2TP incoming call in progress from '192.168.0.117'...
21.06.13 18:12:14,931
pppd[1371]
L2TP connection established.
21.06.13 18:12:14,935
pppd[1371]
Connect: ppp1 <--> socket[34:18]
21.06.13 18:12:14,944
UserEventAgent[17]
Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
21.06.13 18:12:15,036
pppd[1371]
CHAP peer authentication succeeded for <username>
21.06.13 18:12:15,042
pppd[1371]
DSAccessControl plugin: User '<username>' authorized for access
21.06.13 18:12:15,052
pppd[1371]
Unsupported protocol 0x8057 received
21.06.13 18:12:15,058
pppd[1256]
l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:15,058
pppd[1371]
local IP address 192.168.0.103
21.06.13 18:12:15,059
pppd[1371]
remote IP address 192.168.0.203
21.06.13 18:12:15,061
pppd[1371]
l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:15,068
configd[21]
network changed: v4(en0:192.168.0.103, ppp0, ppp1+:192.168.0.103) DNS* Proxy SMB
21.06.13 18:12:17,102
apsd[466]
Certificate not yet generated
21.06.13 18:12:18,103
apsd[466]
Certificate not yet generated
21.06.13 18:12:19,004
apsd[466]
Couldn't find cert in response dict
21.06.13 18:12:19,006
apsd[466]
Failed to get client cert on attempt 11, will retry in 900 seconds
21.06.13 18:12:19,066
racoon[226]
IKE Packet: transmit success. (Information message).
21.06.13 18:12:19,067
racoon[226]
IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA).
21.06.13 18:12:19,120
apsd[466]
Certificate not yet generated
21.06.13 18:12:21,802
pppd[1256]
l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:21,817
pppd[1371]
l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:21,822
configd[21]
network changed: v4(en0:192.168.0.103, ppp0, ppp1-:192.168.0.103) DNS* Proxy SMB
21.06.13 18:12:21,981
pppd[1371]
Fatal signal 6
21.06.13 18:12:21,982
racoon[226]
IKE Packet: receive success. (Information message).
21.06.13 18:12:22,011
vpnd[1210]
--> Client with address = 192.168.0.203 has hungup
21.06.13 18:12:22,022
UserEventAgent[17]
Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
21.06.13 18:12:23,837
apsd[466]
Certificate not yet generated
21.06.13 18:12:23,839
apsd[466]
Certificate not yet generated
21.06.13 18:12:25,148
apsd[466]
Couldn't find cert in response dict
21.06.13 18:12:25,148
apsd[466]
Failed to get client cert on attempt 12, will retry in 900 seconds
21.06.13 18:12:25,845
apsd[466]
Certificate not yet generated
Connecting from external, VPN fail:
21.06.13 18:10:52,533
racoon[226]
Connecting.
21.06.13 18:10:52,533
racoon[226]
IPSec Phase1 started (Initiated by peer).
21.06.13 18:10:52,535
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 1).
21.06.13 18:10:52,536
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 2).
21.06.13 18:10:52,692
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 3).
21.06.13 18:10:52,713
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 4).
21.06.13 18:10:52,882
racoon[226]
IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
21.06.13 18:10:52,882
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 5).
21.06.13 18:10:52,882
racoon[226]
IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
21.06.13 18:10:52,883
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 6).
21.06.13 18:10:52,883
racoon[226]
IPSec Phase1 established (Initiated by peer).
21.06.13 18:10:53,412
racoon[226]
Connecting.
21.06.13 18:10:53,413
racoon[226]
IPSec Phase2 started (Initiated by peer).
21.06.13 18:10:53,413
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 1).
21.06.13 18:10:53,414
racoon[226]
IKE Packet: transmit success. (Responder, Quick-Mode message 2).
21.06.13 18:10:53,531
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 3).
21.06.13 18:10:53,532
racoon[226]
IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
21.06.13 18:10:53,532
racoon[226]
IPSec Phase2 established (Initiated by peer).
21.06.13 18:11:13,643
racoon[226]
IKE Packet: receive success. (Information message).
21.06.13 18:11:13,671
racoon[226]
IKE Packet: receive success. (Information message).
Hope you see more than me and can help... :-(
Similar Messages
-
[Solved] NetworkManager-pptp VPN not working after update to 0.9.10
Hello,
I have a PPTP VPN set up and it's been working for a long time. However, after I updated last night to networkmanager-0.9.10, it is no longer able to connect to the remote network. I can activate the VPN connection, enter my password, but after a short period of time, the connection reports: "Error: Connection activation failed: the VPN service returned invalid configuration." As I mentioned before, this VPN was working right before the update and I didn't change the configuration on either my computer or the destination network so I'm pretty sure that this is something to do with the update. I'm wondering if anybody else has run into this problem and if they've been able to find a solution. I've been searching all over these forums and the internet for some hours now and I haven't found anything yet. I'm hoping that somebody might be able to point me in the right direction or maybe know of something that might have changed with the new update.
Here is my VPN configuration (using NetworkManager-PPTP. I've also obscured the public IP address):
[connection]
id=MyVPN
uuid=fe6e6265-1a79-4a69-b6d1-8b47e9d4c948
type=vpn
permissions=user:greyseal96:;
autoconnect=false
timestamp=1408950986
[vpn]
service-type=org.freedesktop.NetworkManager.pptp
gateway=192.168.146.114
require-mppe=yes
user=greyseal96
password-flags=3
[ipv6]
method=auto
[ipv4]
method=auto
route1=10.17.0.0/16,10.17.1.1,1
never-default=true
Here are my logs during the time that I tried to connect:
Aug 24 23:44:15 MyArchBox NetworkManager[578]: <info> Starting VPN service 'pptp'...
Aug 24 23:44:15 MyArchBox NetworkManager[578]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 1938
Aug 24 23:44:15 MyArchBox NetworkManager[578]: <info> VPN service 'pptp' appeared; activating connections
Aug 24 23:44:21 MyArchBox NetworkManager[578]: <info> VPN connection 'MyVPN' (ConnectInteractive) reply received.
Aug 24 23:44:21 MyArchBox NetworkManager[578]: <info> VPN plugin state changed: starting (3)
Aug 24 23:44:21 MyArchBox NetworkManager[578]: ** Message: pppd started with pid 1945
Aug 24 23:44:21 MyArchBox NetworkManager[578]: <info> VPN connection 'MyVPN' (Connect) reply received.
Aug 24 23:44:21 MyArchBox pppd[1945]: Plugin /usr/lib/pppd/2.4.6/nm-pptp-pppd-plugin.so loaded.
Aug 24 23:44:21 MyArchBox NetworkManager[578]: Plugin /usr/lib/pppd/2.4.6/nm-pptp-pppd-plugin.so loaded.
Aug 24 23:44:21 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (plugin_init): initializing
Aug 24 23:44:21 MyArchBox pppd[1945]: pppd 2.4.6 started by root, uid 0
Aug 24 23:44:21 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection'
Aug 24 23:44:21 MyArchBox pppd[1945]: Using interface ppp0
Aug 24 23:44:21 MyArchBox pppd[1945]: Connect: ppp0 <--> /dev/pts/2
Aug 24 23:44:21 MyArchBox NetworkManager[578]: Using interface ppp0
Aug 24 23:44:21 MyArchBox NetworkManager[578]: Connect: ppp0 <--> /dev/pts/2
Aug 24 23:44:21 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
Aug 24 23:44:21 MyArchBox NetworkManager[578]: <info> (ppp0): new Generic device (driver: 'unknown' ifindex: 10)
Aug 24 23:44:21 MyArchBox NetworkManager[578]: <info> (ppp0): exported as /org/freedesktop/NetworkManager/Devices/9
Aug 24 23:44:21 MyArchBox pptp[1947]: nm-pptp-service-1938 log[main:pptp.c:333]: The synchronous pptp option is NOT activated
Aug 24 23:44:21 MyArchBox pptp[1954]: nm-pptp-service-1938 log[ctrlp_rep:pptp_ctrl.c:258]: Sent control packet type is 1 'Start-Control-Connection-Request'
Aug 24 23:44:21 MyArchBox pptp[1954]: nm-pptp-service-1938 log[ctrlp_disp:pptp_ctrl.c:758]: Received Start Control Connection Reply
Aug 24 23:44:21 MyArchBox pptp[1954]: nm-pptp-service-1938 log[ctrlp_disp:pptp_ctrl.c:792]: Client connection established.
Aug 24 23:44:22 MyArchBox pptp[1954]: nm-pptp-service-1938 log[ctrlp_rep:pptp_ctrl.c:258]: Sent control packet type is 7 'Outgoing-Call-Request'
Aug 24 23:44:22 MyArchBox pptp[1954]: nm-pptp-service-1938 log[ctrlp_disp:pptp_ctrl.c:877]: Received Outgoing Call Reply.
Aug 24 23:44:22 MyArchBox pptp[1954]: nm-pptp-service-1938 log[ctrlp_disp:pptp_ctrl.c:916]: Outgoing call established (call ID 0, peer's call ID 50048).
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 6 / phase 'authenticate'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (get_credentials): passwd-hook, requesting credentials...
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (get_credentials): got credentials from NetworkManager-pptp
Aug 24 23:44:25 MyArchBox pppd[1945]: CHAP authentication succeeded
Aug 24 23:44:25 MyArchBox NetworkManager[578]: CHAP authentication succeeded
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 8 / phase 'network'
Aug 24 23:44:25 MyArchBox pppd[1945]: MPPE 128-bit stateless compression enabled
Aug 24 23:44:25 MyArchBox NetworkManager[578]: MPPE 128-bit stateless compression enabled
Aug 24 23:44:25 MyArchBox pppd[1945]: Cannot determine ethernet address for proxy ARP
Aug 24 23:44:25 MyArchBox pppd[1945]: local IP address 10.17.10.3
Aug 24 23:44:25 MyArchBox pppd[1945]: remote IP address 10.17.10.1
Aug 24 23:44:25 MyArchBox pppd[1945]: primary DNS address 10.17.2.22
Aug 24 23:44:25 MyArchBox pppd[1945]: secondary DNS address 10.17.2.23
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> VPN connection 'MyVPN' (IP4 Config Get) reply received from old-style plugin.
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> VPN Gateway: 192.168.146.114
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Tunnel Device: ppp0
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> IPv4 configuration:
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Internal Address: 10.17.10.3
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Internal Prefix: 32
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Internal Point-to-Point Address: 10.17.10.1
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Maximum Segment Size (MSS): 0
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Static Route: 10.17.0.0/16 Next Hop: 10.17.1.1
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Forbid Default Route: yes
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Internal DNS: 10.17.2.22
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> Internal DNS: 10.17.2.23
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> DNS Domain: '(none)'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <info> No IPv6 configuration
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <error> [1408949065.481618] [platform/nm-linux-platform.c:1716] add_object(): Netlink error adding 10.17.0.0/16 via 10.17.1.1 dev ppp0 metric 1 mss 0 src user: Unspecific failure
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <warn> VPN connection 'MyVPN' did not receive valid IP config information.
Aug 24 23:44:25 MyArchBox NetworkManager[578]: Cannot determine ethernet address for proxy ARP
Aug 24 23:44:25 MyArchBox NetworkManager[578]: local IP address 10.17.10.3
Aug 24 23:44:25 MyArchBox NetworkManager[578]: remote IP address 10.17.10.1
Aug 24 23:44:25 MyArchBox NetworkManager[578]: primary DNS address 10.17.2.22
Aug 24 23:44:25 MyArchBox NetworkManager[578]: secondary DNS address 10.17.2.23
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 9 / phase 'running'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_ip_up): ip-up event
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_ip_up): sending Ip4Config to NetworkManager-pptp...
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: PPTP service (IP Config Get) reply received.
Aug 24 23:44:25 MyArchBox pppd[1945]: Terminating on signal 15
Aug 24 23:44:25 MyArchBox pppd[1945]: Modem hangup
Aug 24 23:44:25 MyArchBox pptp[1954]: nm-pptp-service-1938 log[callmgr_main:pptp_callmgr.c:245]: Closing connection (unhandled)
Aug 24 23:44:25 MyArchBox pptp[1954]: nm-pptp-service-1938 log[ctrlp_rep:pptp_ctrl.c:258]: Sent control packet type is 12 'Call-Clear-Request'
Aug 24 23:44:25 MyArchBox pptp[1954]: nm-pptp-service-1938 log[call_callback:pptp_callmgr.c:84]: Closing connection (call state)
Aug 24 23:44:25 MyArchBox pppd[1945]: Connect time 0.0 minutes.
Aug 24 23:44:25 MyArchBox pppd[1945]: Sent 0 bytes, received 0 bytes.
Aug 24 23:44:25 MyArchBox pppd[1945]: MPPE disabled
Aug 24 23:44:25 MyArchBox pppd[1945]: Connection terminated.
Aug 24 23:44:25 MyArchBox dbus[579]: [system] Rejected send message, 10 matched rules; type="error", sender=":1.51" (uid=0 pid=1938 comm="/usr/lib/networkmanager/nm-pptp-service ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.52" (uid=0 pid=1945 comm="/sbin/pppd pty /sbin/pptp 192.168.146.114 --nolaunc")
Aug 24 23:44:25 MyArchBox dbus[579]: [system] Rejected send message, 10 matched rules; type="error", sender=":1.51" (uid=0 pid=1938 comm="/usr/lib/networkmanager/nm-pptp-service ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.52" (uid=0 pid=1945 comm="/sbin/pppd pty /sbin/pptp 192.168.146.114 --nolaunc")
Aug 24 23:44:25 MyArchBox dbus[579]: [system] Rejected send message, 10 matched rules; type="error", sender=":1.51" (uid=0 pid=1938 comm="/usr/lib/networkmanager/nm-pptp-service ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.52" (uid=0 pid=1945 comm="/sbin/pppd pty /sbin/pptp 192.168.146.114 --nolaunc")
Aug 24 23:44:25 MyArchBox dbus[579]: [system] Rejected send message, 10 matched rules; type="error", sender=":1.51" (uid=0 pid=1938 comm="/usr/lib/networkmanager/nm-pptp-service ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.52" (uid=0 pid=1945 comm="/sbin/pppd pty /sbin/pptp 192.168.146.114 --nolaunc")
Aug 24 23:44:25 MyArchBox dbus[579]: [system] Rejected send message, 10 matched rules; type="error", sender=":1.51" (uid=0 pid=1938 comm="/usr/lib/networkmanager/nm-pptp-service ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.52" (uid=0 pid=1945 comm="/sbin/pppd pty /sbin/pptp 192.168.146.114 --nolaunc")
Aug 24 23:44:25 MyArchBox NetworkManager[578]: inet 10.17.0.0/16 table main
Aug 24 23:44:25 MyArchBox NetworkManager[578]: priority 0x1 protocol static
Aug 24 23:44:25 MyArchBox NetworkManager[578]: nexthop via 10.17.1.1 dev 10
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <error> [1408949065.487073] [platform/nm-linux-platform.c:2252] link_change(): Netlink error changing link 10: <DOWN> mtu 0 (1) driver 'unknown' udi '/sys/devices/virtual/net/ppp0': No such device
Aug 24 23:44:25 MyArchBox NetworkManager[578]: <error> [1408949065.487153] [platform/nm-linux-platform.c:1777] delete_object(): Netlink error deleting 10.17.10.3/32 lft forever pref forever lifetime 1862-0[4294967295,4294967295] dev ppp0 src kernel: No such device (-31)
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: Terminated ppp daemon with PID 1945.
Aug 24 23:44:25 MyArchBox kernel: Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead.
Aug 24 23:44:25 MyArchBox NetworkManager[578]: Terminating on signal 15
Aug 24 23:44:25 MyArchBox NetworkManager[578]: Modem hangup
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 8 / phase 'network'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: Connect time 0.0 minutes.
Aug 24 23:44:25 MyArchBox NetworkManager[578]: Sent 0 bytes, received 0 bytes.
Aug 24 23:44:25 MyArchBox NetworkManager[578]: MPPE disabled
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 11 / phase 'disconnect'
Aug 24 23:44:25 MyArchBox NetworkManager[578]: Connection terminated.
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 1 / phase 'dead'
Aug 24 23:44:25 MyArchBox dbus[579]: [system] Rejected send message, 10 matched rules; type="error", sender=":1.51" (uid=0 pid=1938 comm="/usr/lib/networkmanager/nm-pptp-service ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.52" (uid=0 pid=1945 comm="/sbin/pppd pty /sbin/pptp 192.168.146.114 --nolaunc")
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** Message: nm-pptp-ppp-plugin: (nm_exit_notify): cleaning up
Aug 24 23:44:25 MyArchBox pppd[1945]: Exit.
Aug 24 23:44:25 MyArchBox NetworkManager[578]: ** (nm-pptp-service:1938): WARNING **: pppd exited with error code 16
Aug 24 23:44:45 MyArchBox NetworkManager[578]: <info> VPN service 'pptp' disappeared
If you've gotten this far, thank you for taking the time to read through all this! Any help that you can give would be much appreciated.
Last edited by greyseal96 (2014-08-27 15:20:02)Hmm, not sure about the 3.16 series kernel, but I found that when I upgraded to kernel 3.18 the PPTP VPN also stopped working. This time, though, it was because, for some reason, there was a change in kernel 3.18 where the firewall kernel modules necessary for the VPN don't get loaded so the firewall won't allow some of the PPTP traffic from the remote side back in. Since the firewall is stateful, these modules need to be loaded so that the firewall can know that the incoming PPTP traffic from the remote side is part of an existing connection. Here's what my network manager logs looked like:
NetworkManager[619]: <info> Starting VPN service 'pptp'...
NetworkManager[619]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 31139
NetworkManager[619]: <info> VPN service 'pptp' appeared; activating connections
NetworkManager[619]: <info> VPN connection 'MyVPN' (ConnectInteractive) reply received.
NetworkManager[619]: <info> VPN plugin state changed: starting (3)
NetworkManager[619]: ** Message: pppd started with pid 31148
NetworkManager[619]: <info> VPN connection 'MyVPN' (Connect) reply received.
pppd[31148]: Plugin /usr/lib/pppd/2.4.7/nm-pptp-pppd-plugin.so loaded.
NetworkManager[619]: Plugin /usr/lib/pppd/2.4.7/nm-pptp-pppd-plugin.so loaded.
NetworkManager[619]: ** Message: nm-pptp-ppp-plugin: (plugin_init): initializing
pppd[31148]: pppd 2.4.7 started by root, uid 0
NetworkManager[619]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection'
pppd[31148]: Using interface ppp0
pppd[31148]: Connect: ppp0 <--> /dev/pts/5
NetworkManager[619]: Using interface ppp0
NetworkManager[619]: Connect: ppp0 <--> /dev/pts/5
NetworkManager[619]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
NetworkManager[619]: <info> (ppp0): new Generic device (driver: 'unknown' ifindex: 7)
NetworkManager[619]: <info> (ppp0): exported as /org/freedesktop/NetworkManager/Devices/6
pptp[31150]: nm-pptp-service-31139 log[main:pptp.c:333]: The synchronous pptp option is NOT activated
pptp[31157]: nm-pptp-service-31139 log[ctrlp_rep:pptp_ctrl.c:258]: Sent control packet type is 1 'Start-Control-Connection-Request'
pptp[31157]: nm-pptp-service-31139 log[ctrlp_disp:pptp_ctrl.c:758]: Received Start Control Connection Reply
pptp[31157]: nm-pptp-service-31139 log[ctrlp_disp:pptp_ctrl.c:792]: Client connection established.
pptp[31157]: nm-pptp-service-31139 log[ctrlp_rep:pptp_ctrl.c:258]: Sent control packet type is 7 'Outgoing-Call-Request'
pptp[31157]: nm-pptp-service-31139 log[ctrlp_disp:pptp_ctrl.c:877]: Received Outgoing Call Reply.
pptp[31157]: nm-pptp-service-31139 log[ctrlp_disp:pptp_ctrl.c:916]: Outgoing call established (call ID 0, peer's call ID 25344).
pppd[31148]: LCP: timeout sending Config-Requests <===HERE IS WHERE THE CONNECTION FAILS BECAUSE THE MODULES AREN'T LOADED.
pppd[31148]: Connection terminated.
NetworkManager[619]: LCP: timeout sending Config-Requests
NetworkManager[619]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 11 / phase 'disconnect'
NetworkManager[619]: Connection terminated.
NetworkManager[619]: <warn> VPN plugin failed: connect-failed (1)
NetworkManager[619]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange): status 1 / phase 'dead'
pppd[31148]: Modem hangup
pppd[31148]: Exit.
NetworkManager[619]: <warn> VPN plugin failed: connect-failed (1)
NetworkManager[619]: Modem hangup
NetworkManager[619]: ** Message: nm-pptp-ppp-plugin: (nm_exit_notify): cleaning up
NetworkManager[619]: <warn> VPN plugin failed: connect-failed (1)
NetworkManager[619]: <info> VPN plugin state changed: stopped (6)
NetworkManager[619]: <info> VPN plugin state change reason: unknown (0)
NetworkManager[619]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active.
NetworkManager[619]: ** (nm-pptp-service:31139): WARNING **: pppd exited with error code 16
NetworkManager[619]: <info> VPN service 'pptp' disappeared
To fix this, I had to add a file to the /etc/modules-load.d directory to have the modules loaded into the kernel at boot. I just created a file called netfilter.conf and put the following in it:
nf_nat_pptp
nf_conntrack_pptp
nf_conntrack_proto_gre
Not sure if this addresses your problem or not, but maybe it's worth a look. -
ASA5510 VPN not working after upgrade from 8.2 to 8.3
Hi,
I have recently upgraded a customer ASA5510 to version 8.3.
After upgrade web access etc is working fine however VPN is down.
The config looks very different after the upgrade plus what looks to be duplicate entries.
I suspect its an access list issue but I'm not sure.
If anyone has any ideas based on the config below it would be greatly appreciated as I'm at a loss....?!
hostname ciscoasa
domain-name default.domain.invalid
enable password NvZgxFP5WhDo0hQl encrypted
passwd FNeDAwBbhVaOtVAu encrypted
names
dns-guard
interface Ethernet0/0
nameif Outside
security-level 0
ip address 217.75.8.203 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 192.168.1.254 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 10.1.1.1 255.255.255.0
management-only
boot system disk0:/asa832-k8.bin
ftp mode passive
clock timezone GMT/IST 0
clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup Inside
dns server-group DefaultDNS
domain-name default.domain.invalid
object network obj-192.168.1.2-04
host 192.168.1.2
object network obj-192.168.1.7-04
host 192.168.1.7
object network obj-192.168.1.0-02
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.2.0-02
subnet 192.168.2.0 255.255.255.0
object network obj-10.1.2.0-02
subnet 10.1.2.0 255.255.255.0
object network obj-192.168.1.224-02
subnet 192.168.1.224 255.255.255.240
object network obj-192.168.1.9-02
host 192.168.1.9
object network obj-192.168.1.2-05
host 192.168.1.2
object network obj-192.168.1.103-02
host 192.168.1.103
object network obj-192.168.1.7-05
host 192.168.1.7
object network NETWORK_OBJ_10.1.2.0_24
subnet 10.1.2.0 255.255.255.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object-group network obj-192.168.1.2-02
object-group network obj-192.168.1.7-02
object-group network obj-192.168.1.0-01
object-group network obj-192.168.2.0-01
object-group network obj-10.1.2.0-01
object-group network obj-192.168.1.224-01
object-group network obj-192.168.1.9-01
object-group network obj-192.168.1.2-03
object-group network obj-192.168.1.103-01
object-group network obj-192.168.1.7-03
object-group network obj-192.168.1.2
object-group network obj-192.168.1.7
object-group network obj-192.168.1.0
object-group network obj-192.168.2.0
object-group network obj-10.1.2.0
object-group network obj-192.168.1.224
object-group network obj-192.168.1.9
object-group network obj-192.168.1.2-01
object-group network obj-192.168.1.103
object-group network obj-192.168.1.7-01
object-group network obj_any
object-group network obj-0.0.0.0
object-group network obj_any-01
object-group service MonitcomUDP udp
port-object range 3924 3924
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip any 192.168.1.224 255.255.255.240
access-list Outside_cryptomap_60 extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_cryptomap_60 extended permit icmp 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq smtp
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq pop3
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq 2000 inactive
access-list Outside_access_in extended permit icmp any any
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in extended permit tcp any host 217.75.8.204 eq 1200
access-list Outside_access_in remark Monitcom
access-list Outside_access_in extended permit tcp host 87.232.117.66 host 217.75.8.205 eq 5900
access-list Outside_access_in extended permit udp any host 217.75.8.205 eq 3924
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 220
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 230
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 240
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 250
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 260
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 1433
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in extended permit tcp any host 217.75.8.206 eq www
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq https
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq www
access-list Outside_access_in extended permit udp any any eq 4500 inactive
access-list Outside_access_in extended permit udp any any eq isakmp inactive
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Inside_access_in extended permit ip any any
access-list Inside_access_in extended permit icmp any any
access-list RemoteVPN_splitTunnelAcl standard permit any
access-list Outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Outside_cryptomap_dyn_20 extended permit ip any 192.168.1.224 255.255.255.240
pager lines 24
logging enable
logging asdm warnings
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPNPool 192.168.1.230-192.168.1.240 mask 255.255.255.0
ip verify reverse-path interface Outside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
icmp permit any Inside
asdm location 192.168.1.208 255.255.255.252 Inside
asdm location 192.168.1.103 255.255.255.255 Inside
asdm location 192.168.1.6 255.255.255.255 Inside
asdm location 192.168.1.7 255.255.255.255 Inside
asdm location 192.168.1.9 255.255.255.255 Inside
no asdm history enable
arp timeout 14400
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-192.168.2.0-02 obj-192.168.2.0-02 unidirectional
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-10.1.2.0-02 obj-10.1.2.0-02 unidirectional
nat (Inside,any) source static any any destination static obj-192.168.1.224-02 obj-192.168.1.224-02 unidirectional
nat (Inside,Outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_10.1.2.0_24 NETWORK_OBJ_10.1.2.0_24
object network obj-192.168.1.2-04
nat (Outside,Inside) static 217.75.8.204
object network obj-192.168.1.7-04
nat (Outside,Inside) static 217.75.8.206
object network obj-192.168.1.0-02
nat (Inside,Outside) dynamic interface
object network obj-192.168.1.9-02
nat (Inside,Outside) static 217.75.8.201
object network obj-192.168.1.2-05
nat (Inside,Outside) static 217.75.8.204
object network obj-192.168.1.103-02
nat (Inside,Outside) static 217.75.8.205
object network obj-192.168.1.7-05
nat (Inside,Outside) static 217.75.8.206
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 217.75.8.198 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server DellServerAAA protocol radius
aaa-server DellServerAAA (Inside) host 192.168.1.4
key test
http server enable
http 62.17.29.2 255.255.255.255 Outside
http 82.141.224.155 255.255.255.255 Outside
http 63.218.54.8 255.255.255.252 Outside
http 213.79.44.213 255.255.255.255 Outside
http 192.168.1.0 255.255.255.0 Inside
http 10.1.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ipsec df-bit clear-df Outside
crypto ipsec df-bit clear-df Inside
crypto dynamic-map Outside_dyn_map 20 match address Outside_cryptomap_dyn_20
crypto map Outside_map 1 match address Outside_1_cryptomap
crypto map Outside_map 1 set peer 89.127.172.29
crypto map Outside_map 1 set transform-set ESP-3DES-SHA
crypto map Outside_map 60 match address Outside_cryptomap_60
crypto map Outside_map 60 set peer 89.105.114.98
crypto map Outside_map 60 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface Outside
crypto isakmp identity key-id nattingreallymatters
crypto isakmp enable Outside
crypto isakmp enable Inside
crypto isakmp policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
telnet 192.168.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 82.141.224.155 255.255.255.255 Outside
ssh 62.17.29.2 255.255.255.255 Outside
ssh 213.79.44.213 255.255.255.255 Outside
ssh 192.168.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
management-access Inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.1.31
dns-server value 192.168.1.31
default-domain value freefoam.ie
username freefoam password JLYaVf7FqRM2LH0e encrypted
username cork password qbK2Hqt1H5ttJzPD encrypted
tunnel-group 193.114.70.130 type ipsec-l2l
tunnel-group 193.114.70.130 ipsec-attributes
pre-shared-key ******
tunnel-group 89.127.172.29 type ipsec-l2l
tunnel-group 89.127.172.29 ipsec-attributes
pre-shared-key ******
tunnel-group 89.105.114.98 type ipsec-l2l
tunnel-group 89.105.114.98 ipsec-attributes
pre-shared-key *****
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool VPNPool
authentication-server-group DellServerAAA
default-group-policy RemoteVPN
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect h323 h225
inspect h323 ras
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:0dc16fe893bd4bba6fdf6b7eed93e553Hi,
Many thanks for your reply.
Finally got access to implement your suggestions.
Initially none of the VPN's were up.
After making the change the two VPN's came up.
However only data via the first VPN is possible.
Accessing resources on the 10.1.2.0 network is still not possible.
Attached is the latest config, any input is greatly appreciated;
hostname ciscoasa
domain-name default.domain.invalid
enable password NvZgxFP5WhDo0hQl encrypted
passwd FNeDAwBbhVaOtVAu encrypted
names
dns-guard
interface Ethernet0/0
nameif Outside
security-level 0
ip address 217.75.8.203 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 192.168.1.254 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 10.1.1.1 255.255.255.0
management-only
boot system disk0:/asa832-k8.bin
ftp mode passive
clock timezone GMT/IST 0
clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup Inside
dns server-group DefaultDNS
domain-name default.domain.invalid
object network obj-192.168.1.2-04
host 192.168.1.2
object network obj-192.168.1.7-04
host 192.168.1.7
object network obj-192.168.1.0-02
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.2.0-02
subnet 192.168.2.0 255.255.255.0
object network obj-10.1.2.0-02
subnet 10.1.2.0 255.255.255.0
object network obj-192.168.1.224-02
subnet 192.168.1.224 255.255.255.240
object network obj-192.168.1.9-02
host 192.168.1.9
object network obj-192.168.1.2-05
host 192.168.1.2
object network obj-192.168.1.103-02
host 192.168.1.103
object network obj-192.168.1.7-05
host 192.168.1.7
object network NETWORK_OBJ_10.1.2.0_24
subnet 10.1.2.0 255.255.255.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object-group network obj-192.168.1.2-02
object-group network obj-192.168.1.7-02
object-group network obj-192.168.1.0-01
object-group network obj-192.168.2.0-01
object-group network obj-10.1.2.0-01
object-group network obj-192.168.1.224-01
object-group network obj-192.168.1.9-01
object-group network obj-192.168.1.2-03
object-group network obj-192.168.1.103-01
object-group network obj-192.168.1.7-03
object-group network obj-192.168.1.2
object-group network obj-192.168.1.7
object-group network obj-192.168.1.0
object-group network obj-192.168.2.0
object-group network obj-10.1.2.0
object-group network obj-192.168.1.224
object-group network obj-192.168.1.9
object-group network obj-192.168.1.2-01
object-group network obj-192.168.1.103
object-group network obj-192.168.1.7-01
object-group network obj_any
object-group network obj-0.0.0.0
object-group network obj_any-01
object-group service MonitcomUDP udp
port-object range 3924 3924
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip any 192.168.1.224 255.255.255.240
access-list Outside_cryptomap_60 extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_cryptomap_60 extended permit icmp 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq smtp
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq pop3
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq 2000 inactive
access-list Outside_access_in extended permit icmp any any
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in extended permit tcp any host 217.75.8.204 eq 1200
access-list Outside_access_in remark Monitcom
access-list Outside_access_in extended permit tcp host 87.232.117.66 host 217.75.8.205 eq 5900
access-list Outside_access_in extended permit udp any host 217.75.8.205 eq 3924
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 220
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 230
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 240
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 250
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 260
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 1433
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in extended permit tcp any host 217.75.8.206 eq www
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq https
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq www
access-list Outside_access_in extended permit udp any any eq 4500 inactive
access-list Outside_access_in extended permit udp any any eq isakmp inactive
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Inside_access_in extended permit ip any any
access-list Inside_access_in extended permit icmp any any
access-list RemoteVPN_splitTunnelAcl standard permit any
access-list Outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Outside_cryptomap_dyn_20 extended permit ip any 192.168.1.224 255.255.255.240
access-list global_access extended permit ip any any
access-list Outside_cryptomap_80_3 extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Split-tunnel standard permit 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm warnings
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPNPool 192.168.1.230-192.168.1.240 mask 255.255.255.0
ip verify reverse-path interface Outside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
icmp permit any Inside
asdm image disk0:/asdm-647.bin
asdm location 192.168.1.208 255.255.255.252 Inside
asdm location 192.168.1.103 255.255.255.255 Inside
asdm location 192.168.1.6 255.255.255.255 Inside
asdm location 192.168.1.7 255.255.255.255 Inside
asdm location 192.168.1.9 255.255.255.255 Inside
no asdm history enable
arp timeout 14400
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-192.168.2.0-02 obj-192.168.2.0-02
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-10.1.2.0-02 obj-10.1.2.0-02
nat (Inside,any) source static any any destination static obj-192.168.1.224-02 obj-192.168.1.224-02 unidirectional
nat (Inside,Outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_10.1.2.0_24 NETWORK_OBJ_10.1.2.0_24
object network obj-192.168.1.2-04
nat (Outside,Inside) static 217.75.8.204
object network obj-192.168.1.7-04
nat (Outside,Inside) static 217.75.8.206
object network obj-192.168.1.0-02
nat (Inside,Outside) dynamic interface
object network obj-192.168.1.9-02
nat (Inside,Outside) static 217.75.8.201
object network obj-192.168.1.2-05
nat (Inside,Outside) static 217.75.8.204
object network obj-192.168.1.103-02
nat (Inside,Outside) static 217.75.8.205
object network obj-192.168.1.7-05
nat (Inside,Outside) static 217.75.8.206
nat (Inside,Outside) after-auto source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
access-group global_access global
route Outside 0.0.0.0 0.0.0.0 217.75.8.198 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server DellServerAAA protocol radius
aaa-server DellServerAAA (Inside) host 192.168.1.4
key test
http server enable
http 62.17.29.2 255.255.255.255 Outside
http 82.141.224.155 255.255.255.255 Outside
http 63.218.54.8 255.255.255.252 Outside
http 213.79.44.213 255.255.255.255 Outside
http 192.168.1.0 255.255.255.0 Inside
http 10.1.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ipsec df-bit clear-df Outside
crypto ipsec df-bit clear-df Inside
crypto dynamic-map Outside_dyn_map 20 match address Outside_cryptomap_dyn_20
crypto dynamic-map Outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map Outside_map 1 match address Outside_1_cryptomap
crypto map Outside_map 1 set peer 89.127.172.29
crypto map Outside_map 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-DES-SHA ESP-3DES-MD5 ESP-AES-256-MD5 ESP-3DES-SHA ESP-DES-MD5
crypto map Outside_map 60 match address Outside_cryptomap_60
crypto map Outside_map 60 set peer 89.105.114.98
crypto map Outside_map 60 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface Outside
crypto isakmp identity key-id nattingreallymatters
crypto isakmp enable Outside
crypto isakmp enable Inside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash md5
group 5
lifetime 86400
crypto isakmp policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 50
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
telnet 192.168.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 82.141.224.155 255.255.255.255 Outside
ssh 62.17.29.2 255.255.255.255 Outside
ssh 213.79.44.213 255.255.255.255 Outside
ssh 192.168.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
management-access Inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable Outside
anyconnect-essentials
svc image disk0:/anyconnect-dart-win-2.5.3055-k9.pkg 1
svc image disk0:/anyconnect-macosx-powerpc-2.5.3055-k9.pkg 2
svc enable
tunnel-group-list enable
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.1.31
dns-server value 192.168.1.31
vpn-tunnel-protocol IPSec svc
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split-tunnel
default-domain value freefoam.ie
username freefoam password JLYaVf7FqRM2LH0e encrypted
username cisco password DfO7NBd5PZ1b0kZ1 encrypted privilege 15
username cork password qbK2Hqt1H5ttJzPD encrypted
tunnel-group 193.114.70.130 type ipsec-l2l
tunnel-group 193.114.70.130 ipsec-attributes
pre-shared-key ************
tunnel-group 89.127.172.29 type ipsec-l2l
tunnel-group 89.127.172.29 ipsec-attributes
pre-shared-key ************
tunnel-group 89.105.114.98 type ipsec-l2l
tunnel-group 89.105.114.98 ipsec-attributes
pre-shared-key ************
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool VPNPool
authentication-server-group DellServerAAA
default-group-policy RemoteVPN
tunnel-group RemoteVPN webvpn-attributes
group-alias Anyconnect enable
tunnel-group RemoteVPN ipsec-attributes
pre-shared-key c0nnect10nParameter$
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect h323 h225
inspect h323 ras
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:fae6b7bc25fcf39daffbcdc6b91c9d8e -
Hi all,
An excellent 2015 to you all.
I wonder whether it's possible to get my (USB) SMK Ehome Infrared transceiver (which serves to connect my PC to a remote control) to work again. It functioned okay under Windows 8, but when I upgraded my system to Windows 8.1 it didn't respond anymore.
How's that possible? And do you have any ideas how I can resolve this?
I use the remote control to start and stop videos and to adjust the sound volume.
What I have done already:
-disabled and enabled the consumer IR devices under 'HID devices' in device management.
-disabled and enabled the USB controller for the Ehome Infrared Receiver.
No luck so far. Anybody knows what to do?
Cheers,
PeterHi,
What is the driver status in device manager? Have you tried to manually download the right version driver for Windows 8.1 from the transceiver's manufacture website and install it in your system?
Meanwhile, please run services.msc to launch services manager, then scroll down to "Human Interface Device Access service", make sure the service is "started" to "manual" or "automatic", test the issue again.
Yolanda Zhu
TechNet Community Support
Thanks, Yolanda Zhu. There is no driver on the manufacturer's website, but the driver is included from Windows versions XP to 8 and the device responds as expected under these OS Versions. In Windows 8.1 it seems also to be included, and device manager
indicates under Human Interface Devices that the 'Microsoft eHome infra transceiver' driver functions correctly and under
Universal Serial Bus controllers that 'eHome infrared receiver' (USBCIR) functions correctly as well. But when I press the remote, the red LED blinks, but nothing else happens.
The "Human Interface Device Service" is set to automatic and is being executed.
Can it be that the mapping ('action on remote' to 'action on PC') is lost somehow?
Cheers,
Peter AKA Django -
My Hot Spot does not work after update to 6.0.1. Any suggestions?
Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal. -
Anyone else's iPhone 4s speaker not working after update to iOS 6.1?
My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere -
Print size in Photoshop CC does not work after updating
Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
Can anyone help please?
thanks
FujibillCheck the Image>Image Size and see what the print size is supposed to to be for the open document.
Also, resetting the photoshop cc preferences might fix it.
http://forums.adobe.com/thread/375776?tstart=0 -
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?
but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
C7 browser not working after update to anna
c7 browser not working after update to anna.. Plz help
Hi bluz,
Welcome to the Nokia forum.
If the default browser doesn't work after updating to Anna, hard reset the device and then reinstall Anna with Nokia Suite.
Take a back up with Nokia Suite by going to Tools > Back up. When making the backup, don't tick the Settings box as this will back up the bug. Now hard reset the phone with *#7370# and default security code 12345 unless you've changed this code yourself. Once the phone has rebooted you will have an empty phone.
Now click on the green icon in Nokia Suite and reinstall the current software. Once you've done this, click on Tools > Restore to place the back up back onto your phone.
After doing the above you will be able to use the default browser again.
Let me know how you get on so that I can troubleshoot, if necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too. -
Viber is not working after updating my Xperia SP to new Android 4.3There are totally confusing simptoms: I can not hear the other party, the other party can not hear me , I can not answer the call even when I try to or the other party can not answer my viber call even if they try to. CAN SOMEONE HELP or HAVE ANY IDEA :-)
I also had problems with xperia sp after updating to 4.3 - phone was slow to an extent of being unusable. However, even before update (on firmware 4.1) I found the phone quite slow.I am very happy that I returned the phone to my carrier in exchange to nexus 5. When I got hold of it I really felt the change in responsivenes compared to sony. I cannot recommend it more - it has all the sony has + better responsivness, better screen, better battery life (yes, I have tested this), better camera minus bloatware. I got all of this for paying 50 eur more. That was my second and last phone from sony. After having sony xperia S for 1 week and returning it because of wifi problems and after trying xperia sp and again returning it because of crappily written firmware I really wonder what are people at sony thinking about. People, don't you see that sony does not give a **bleep** about customer satisfaction after getting their money? Of course, you can downgrade manually, but don't forget that this voids your warranty - staff at service centre would be more than glad to tell you you have just voided your warranty because you brought them phone that you had to downgrade because of crapilly written UPgrade!. In addition to that downgrade means spending your a couple of hours of your precious time correcting mistakes of multinational corporation that simply does not give a **bleep**. Throw your sony into trash instead, and use those hours to earn money with which you can buy new phone that will actually work.
-
my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELPTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update. -
My new iPad sound is not working after updating to ios 6.1
My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me
Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad -
Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular
Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular
BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.
-
IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.
iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?
Contact your carrier - voicemail, and visual voicemail, is a carrier feature.
-
Click to activate does not work after update
Click to activate plugin does not work after updating to version 23.0.1
hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.
Maybe you are looking for
-
itunes was on mac book that crashed. Trying to move music and podcasts to wifes windows 7 pc. Followed all steps for importing purchased items. Only a portion of purchased music was transferred to new computer. What to do???
-
Iphoto can't read RAW files from Olympus E-PL1
I just got an Olympus E-PL1. Iphoto doesn't recognize the RAW file with the extenstion .ORF The E-PL1 has the same sensor as the P1 and P2. I would assume that both those generate the same RAW data.
-
Conversion Exit on ALV fieldcatalog ?
Hi all, I have an editable ALV grid and one of the column displays a field which is of the floating type. Now instead of the regular 1.2870001E+00, can I make it display 1.28 ( Decimal rounded to 2 decimal places). I am trying to modify the fieldcat.
-
Need Explanation about code ABAP
Hi, what does mean this code : *if not SOURCE_ENTETE-MONAT is initial. *BBKPF-MONAT = SOURCE_ENTETE-MONAT. *endif. i find it in LSMW (step number 5) what does mean exactly initial i want to integrate some FI document
-
How to eject a dvd that is stuck and doesn't appear on desktop?
I did insert a dvd a few days ago and now it doesn't appear anywhere and I can not eject it. But when I turn on the computer the disc drive makes strange sounds. How can I eject it?